检索结果-南通市图书馆

FRICTION PROPERTIES OF OIL-INFILTRATED POROUS AAO FILM ON AN aluminum substrate

Acta Metallurgica Sinica(English Letters) 2005年第3期18卷 249-253页

作者： C.X.Jiang J.P.Tu S.Y.Guo M.F.Fu X.B.Zhao DepartmentofMaterialsScienceandEngineering ZhejiangUniversityHangzhou310027China／／DeparunentofMechanicalandElectronicEngineeringNanchangUniversityNanchang330029China DepartmentofMaterialsScienceandEngineering ZhejiangUniversityHangzhou310027China DepartmentofMechanicalEngineering ZhejiangInstituteofScienceandTechnologyHangzhou310012China DepartmentofMechanicalandElectronicEngineering NanchangUniversityNanchang330029China

The porous anodic aluminum oxide (AAO) film on a pure aluminum substrate was pre pared by a two-step anodization in a 0.3M oxalic acid solution and pore-enlargem ent treatment in the phosphoric acid aqueous solution at 50℃. The diameter of h ighly ordered pore on the AAO film was about 90nm, and the thickness of the AAO film was 3μm. The mineral oil was infiltrated in the ordered nanometer sized po res of AAO film on an aluminum substrate due to the capillarity effect. The fric tion coefficient was measured using a ball-on-disk tribotester. The tests were c onducted at loads range from 490 to 2450mN and at sliding velocities between 0.1 and 0.5m·s-1. Oil infiltration in porous AAO film modified friction and consid erably improved the wear resistance. As compared to the porous AAO film, the oil -infiltrated specimen had low friction coefficient. With increasing the applied load and sliding velocity, the friction coefficient of the oil-infiltrated film decreased. It indicates that the oil-infiltrated AAO film produced a new way to modify the friction and wear of aluminum alloy.

关键词： friction coefficient oil-infiltrated AAO film aluminum substrate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Liquid metal corrosion sculpture to fabricate quickly complex patterns on aluminum

引用

Science China(Technological Sciences) 2017年第1期60卷 65-70页

作者： LU JinRong YI LiTing WANG Lei TAN SiCong GUI Han LIU Jing Department of Biomedical Engineering School of Medicine Tsinghua University Beijing 100084 China

A liquid metal enabled corrosion sculpture technique for quickly fabricating complex pattems on aluminum substrate is proposed and experimentally demonstrated. According to the conceptual investigation, it is clarified that the width and the depth of a printed track are dominated by sculpture time and working temperature. The printed size can reach small values of 38 μm through controlling the sculpture time for 60 s. As the sculpture time was increased from 5 to 25 rain at 20℃, the depth of the fabricated pattern was improved from 13.3 to 25.6 μm. The sculptured depth of the pattern would increase from 13.3 to 106.9 μm when the sculpture time was fixed at 5 min and the temperature was raised from 20 to 60℃. To investigate the sculpture behavior in detail, the phases and microstructure of sculpture surface were quantitatively measured via a group of microscope imaging system with fundamental mechanisms interpreted. The present liquid metal sculpture method on aluminum substrate adds a new valuable soft tool for current metal engraving technology family.

关键词： sculpture printing corrosion liquid metal aluminum substrate soft fabrication

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Characteristics of indirect laser-induced plasma from a thin film of oil on a metallic substrate

引用

Frontiers of physics 2015年第2期10卷 115-123页

作者：修俊山白雪石 Vincent Motto-Ros 俞进 Department of Sciences Shandong University of Technology Zibo 255049 China Institut Lumiere Matiere UMR5306 Universite Lyon 1-CNRS Universite de Lyon 69622 Villeurbanne Cedex France

Optical emissions from the major and trace elements embodied in a transparent gel prepared from cooking oil were detected after the gel was spread in a thin film on a metallic substrate. Such emissions are due to the indirect breakdown of the coating layer. The generated plasma, a mixture of substances from the substrate, the layer, and the ambient gas, was characterized using emission spectroscopy. The characteristics of the plasma formed on the metal with and without the coating layer were investigated. The results showed that A1 emission induced from the aluminum substrates coated with oil films extends away from the target surface to ablate the oil film. This finally formed a bifurcating circulation of aluminum vapor against a spherical confinement wall in the front of the plume, which differed from the evolution of the plasma induced from the uncoated aluminum target. The strongest emissions of elements from the oil films can be observed at 2 mm above the target after a detection delay of 1.0μs. A high temperature zone has been observed in the plasma after the delay of 1.0 μs for the plasma induced from the coated metal. This higher temperature determined in the plasma allows the consideration of the sensitive detection of trace elements in liquids, gels, biological samples, or thin films.

关键词： indirect laser-induced plasma thin layer aluminum substrate higher temperature

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：