检索结果-南通市图书馆

Influence of Hot-Rolling Deformation on Microstructure,Crystalline Orientation,and Texture Evolution of the Ti6Al4V-5Cu Alloy

引用

金属学报:英文版 2023年第8期36卷 1261-1280页

作者： Solomon Kerealme Yeshanew Chunguang Bai Qing Jia Tong Xi Zhiqiang Zhang Diaofeng Li Zhizhou Xia Rui Yang Ke Yang Shi-Changxu Innovation Center for Advanced Materials Institute of Metal Research(IMR)Chinese Academy of Sciences(CAS)Shenyang110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang110016China

The influence of hot-deformation on the microstructure,crystalline orientation,and texture evolution of Ti6Al4V-5Cu,an antibacterial(α+β)titanium alloy,was investigated.The alloy was deformed using a hot rolling process in 15%,58%,and 73%thickness reduction ratios.It was found that the basaland pyramidaltype slip planes could be activated in theαphase,which dominated the deformation behavior of Ti6Al4V-5Cu alloy.Under various deformation conditions,the alloy revealed different microstructure features.On the 15%hot rolled alloy,the deformation was performed by the breakdown of priorβgrain boundaries(GBβ),which was attributed to the formation of coarseαgrains,rotated nearly 45°with respect to the transversal and rolling directions.The presence of different sub-structure geometries made the interior grain size distribution heterogeneous.On the 58%hot rolled alloy,Ti2Cu intermetallic compound was found at theα/βinterface.High-resolution transmission electron microscopy investigation showed the occurrence of grain rotation in different crystallographic directions.At room temperature,the percentage elongation(El)of the alloy reached 23.15%on the 58%hot rolled sample.On the 73%deformed alloy,refined and randomly oriented characteristics of grains were obtained due to higher thickness reduction,which resulted from the segregation of very fine granules.The influence of grain rotation during a hot rolling process revealed that theα/βtexture fiber separation angle to maintain the Burger orientation relationship of{0001}α//{110}βplanes decreased with increase of the thickness reduction ratio when Ti6Al4V-5Cu alloy was deformed by a hot rolling mechanism.Activation of tensile{1012}and compressive{1122}twins on the deformation of the alloy was also studied.

关键词： Ti6Al4V-5Cu Hot rolling Microstructure Texture evolution twining

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Continuous observation of twinning and dynamic recrystallization in ZM21 magnesium alloy tubes during locally heated dieless drawing

引用

Journal of Magnesium and Alloys 2022年第3期10卷 791-805页

作者： Peihua Du Shusaku Furusawa Tsuyoshi Furushima Department of Mechanical and Biofunctional Systems Institute of Industrial ScienceThe University of Tokyo4-6-1KomabaMeguroTokyo 153-8505Japan

Compared to cold drawing,dieless drawing has shown great potential for manufacturing biodegradable Mg alloy microtubes due to the large reduction in area acquired in a single pass.However,owing to the local heating and local deformation,the deformation mechanism during dieless drawing is not clear,and thus causing difficulties in controlling the microstructure of dieless drawn tubes.For the purpose of acquiring a desired microstructure.in this study the deformation mechanism of ZM21 Mg alloy tube was clarified by conducting continuous observation of the microstructural evolution during dieless drawing.The results show that both SRX and DRX occurred during dieless drawing.SRX occurred before the plastic deformation to soften dieless drawn tubes.With increase of feeding speed,the deformation mechanism changed accordingly:(1) At the low-speed of 0.02 mm/s,the deformation mechanism was dominated by twin-slip sliding,during which {10-12} tension twins were generated inside grains to accommodate the plastic deformation by changing the crystal orientation.(2) At the intermediate-speed of 2 mm/s,a twin-DRX process related to {10-12} tension twin was observed,which was characterized by the generation of abundant {10-12} tension twins and the evolution of misorientation angle of {10-12} tension twins.Moreover,the transformation from twin-DRX to CDRX can be observed at the late stage of plastic deformation,which was attributed to the inhomogeneous conditions of dieless drawing.(3) At the high-speed of 5 mm/s,a CDRX process was observed,during which grain boundary sliding and grain tilting were observed,in addition to the gradual rotation of subgrains.These results show that during dieless drawing,DRX is not only a temperature-dependent phenomenon,but also influenced by the variation of feeding speed.

关键词： Dieless drawing Inhomogeneous condition twining Dynamic recrystallization Microstructure evolution Magnesium alloy Twinning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of pre-homogenizing treatment on microstructure and mechanical properties of hot-rolled AZ91 magnesium alloys

引用

Journal of Magnesium and Alloys 2016年第2期4卷 115-122页

作者： Liuwei Zheng Huihui Nie Wei Liang Hongxia Wang Yide Wang College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province Taiyuan 030024ShanxiChina Taiyuan Iron and Steel(Group)Co. LTDTaiyuan 030003ShanxiChina

To improve the homogeneity and rolling formability of as-cast AZ91 magnesium,the effects of pre-homogenizing treatment on microstructure evolution,deformation mechanism,mechanical properties and tensile fracture morphology of hot-rolled AZ91 magnesium alloy were studied.The results showed that the amount of coarseβ-Mg17Al12 phase decreases dramatically,being distributed along the grain boundaries as small strips after homogenizing.twining plays a dominant role in the deformation mechanism of AZ91 alloys in the experimental condition,while dynamic recrystallization(DRX)considerably occurred in homogenized-rolled alloys,contributed to microstructure uniformity andβ-Mg17Al12 phase precipitated refinement.The tensile strength of homogenized-rolled AZ91 alloys increases dramatically with elongation declining slightly in contrast to homogenized alloys.The fracture surface of homogenized-rolled specimen exhibits more ductile fracture with the manifestation of a large amount of dimples distributing higher density in matrix,while the micro cracks are prone to initiate around the Mg/Mg17Al12 phase interface and grain boundaries owing to the fragile interface bonding of two phases.

关键词： Homogenization AZ91 magnesium alloys twining Hot rolling β-Mg17Al12 phase

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：