检索结果-南通市图书馆

Proteomic Alterations in Human Dermal Fibroblasts under Photo-Induced Pollution Caused by Excessive solar irradiations such as Infra-Red, Blue Light, UVA and UVB

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Cosmetics, Dermatological Sciences and Applications 2023年第1期13卷 16-32页

作者： Balu Muthaiyah Suresh Kumar Ramadoss Yellapantula Sree Gouri Balaji Bandyopadhyay ITC Life Sciences and Technology Center (ITC LSTC) Bangalore India

Background: The skin serves as the first line of defense for the human body. Direct sunlight contains damaging radiations that can speed up the ageing process of the skin, resulting in wrinkles, leathery skin, dark patches, and solar elastosis. Objectives: To evaluate the effect of multiple solar irradiation related factors at the protein level in human dermal fibroblast (HDF). The overall effect of individual solar irradiations such as Infrared A (IRA), blue light (BL), UVA, and UVB on HDF cells and the extent of molecular level aberrations to be assessed and compared against each. Methods: Label-free quantitative proteomics (MS/MS) approach has been adopted in this study to observe the protein level changes induced in the HDF cells through various exposures of full light sources. Following that, downstream insilico analysis has been carried out. Results: In this study, it is demonstrated all the four different solar irradiations significantly contribute to the molecular degeneration of skin cells through various mechanisms. This study confirms that BL down-regulates DNA repair proteins and the skin cells-HDF stimulate the histone proteins as a response mechanism to maintain the chromosomal integrity. Conclusions: The proteomics experiment carried out in the current study intends to support the future sun care products based on full light protection technology that can be custom designed to provide complete protection from the solar radiation. Similar technology could enhance the further investigations for deeper understanding of induction, mode of action, and prevention of skin damage from extensive solar irradiation.

关键词： Full Light Technology solar irradiation Cellular Damage DNA Repair & Damage HDF Cells

solar evaporation for simultaneous oil-water separation and electricity generation with Janus wood-based absorbers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第2期18卷 13-23页

作者： Yue Yang Ze Fu Qi Zhang Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse School of Environmental and Biological EngineeringNanjing University of Science&TechnologyNanjing 210094China Key Laboratory of Industrial Ecology and Environmental Engineering(Ministry of Education) School of Environmental Science and TechnologyDalian University of TechnologyDalian 116024China National Laboratory of Solid State Microstructures Collaborative Innovation Center of Advanced MicrostructuresCollege of Engineering and Applied SciencesKey Laboratory of Intelligent Optical Sensing and Manipulation(Ministry of Education)Jiangsu Key Laboratory of Artificial Functional MaterialsNanjing UniversityNanjing 210093China

Oily wastewater from ocean oil spills endangers marine ecosystems and human health. Therefore, developing an effective and sustainable solution for separating oil-water mixtures is urgent. Interfacial solar photothermal evaporation is a promising approach for the complete separation of two-phase mixtures using only solar energy. Herein, we report a carbonized wood-based absorber with Janus structure of comprising a hydrophobic top-layer and an oleophobic bottom-layer for simultaneous solar-driven oil-water separation and electricity generation. Under sunlight irradiation, the rapid evaporation of seawater will induce a separation of oil-water mixtures, and cause a high salt concentration region underlying the interface, while the bottom “bulk water” maintains in a low salt concentration, thus forming a salinity gradient. Electricity can be generated by salinity gradient power. Therefore, oil-water separation efficiency of > 99% and derived extra electricity power of ~0.1 W/m2 is achieved under solar radiation, demonstrating the feasibility of oil-water separation and electricity production synchronously directly using solar energy. This work provides a green and cost-effective path for the separation of oil-water mixtures.

关键词： Oily wastewater Carbonized wood Salinity gradient Electricity generation solar irradiation

Gadolinium doped tin dioxide nanoparticles: an efficient visible light active photocatalyst

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2015年第12期33卷 1275-1283页

作者： Abdullah M Al-Hamdi Mika Sillanp?? Joydeep Dutta Laboratory of Green Chemistry Lappeenranta University of Technology Chair in Nanotechnology Water Research Center Sultan Qaboos University Functional Materials Division School of Information and Communication Technology KTH Royal Institute of Technology

Photocatalytic degradation of phenol with sol-gel prepared rare earth doped tin dioxide （SnO2） nanoparticles was reported. Gadolinium doped tin dioxide （SnO2：Gd） nanoparticles were found to absorb higher visible light compared to lanthanum, neodymium and cerium doped materials that were studied in detail. Photocatalytic degradation of phenol under artificial white light and sunlight in the presence of SnO2：Gd nanoparticles was studied with high performance liquid chromatography （HPLC）, capillary electrophoresis （CE）, total organic carbon （TOC） measurements and the determination of chemical oxygen demand （COD）. Clear correlations be- tween the results obtained from these multiple measurements were found, and a kinetic pathway for the degradation process was pro- posed. Within 150 min of solar irradiation, the TOC of a 10 ppm phenol solution in water was reduced by 95%-99%, thus demon- strating that SnO2：Gd nanoparticles are efficient visible light photocatalysts.

关键词： rare earth dopants solar irradiation phenol photo-degradation tin dioxide nanoparticles organic by-products

solar photocatalytic decomposition of two azo dyes on multiwalled carbon nanotubes(MWCNTs)/TiO_(2)composites

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2010年第3期4卷 311-320页

作者： Huilong WANG Shuqin LIU Hui WANG Wenfeng JIANG Department of Chemistry Dalian University of TechnologyDalian 116023China

Multi-walled carbon nanotubes(MWCNTs)/TiO_(2)composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),Fourier transform infrared(FT-IR),and UV-vis absorption *** to pure TiO_(2),the combination of MWCNTs with titania could cause a significant absorption shift toward the visible *** photocatalytic performances of the MWCNTs/TiO_(2)composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G(K-6G)and Mordant black 7(MB 7)azo dyes solution under solar light *** results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO_(2)for the degradation of azo dyes K-6G and MB *** effect of MWCNTs content,catalyst dosage,pH,and initial dye concentration were examined as operational *** kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate *** photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%.A plausible mechanism is also proposed and discussed on the basis of experimental results.

关键词： sol-gel multi-walled carbon nanotubes(MWCNTs)/TiO_(2)composite photocatalysis azo dye solar irradiation

Exploring the synergy of building massing and façade design through evolutionary optimization

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Architectural Research 2022年第4期11卷 761-780页

作者： Likai Wang Han Zhang Xuehan Liu Guohua Ji School of Architecture and Urban Planning Nanjing UniversityNanjing 210093China

In performance-based architectural design optimization, the design of building massings and façades is commonly separated, which weakens the effectiveness in performance improvement. In response, this study proposes a hybrid massing-façade integrated design generation and optimization workflow to integrate the two elements in an evolutionary design process. Compared with the existing approaches, the proposed workflow emphasizes the diversity of building design generation, with which various combinations of building massing forms and façade patterns can be systematically explored. Two case studies and a corresponding comparison study are presented to demonstrate the efficacy of the proposed workflow. Results show that the optimization can produce designs coupling the potential of building massings and façades in performance improvement. In addition, the optimization can provide information that supports early-stage architectural design exploration. Such information also enables the architect to understand the performance implications associated with the synergy of building massing and façade design.

关键词： Performance-based design Building massing Façade Daylighting solar irradiation Discomfort glare Design exploration Early design stage Design optimization EvoMass

The Benefits of solar Energy on the Provision of Sustainable Affordable Housing in Nigeria

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Power and Energy Engineering 2023年第6期11卷 1-15页

作者： Ishola Adedeji Gokay Deveci Huda Salman Ishola Abiola Scott Sutherland School of Architecture and Built Environment Robert Gordon University Aberdeen UK Emerald Energy Institute University of Port Harcourt Port Harcourt Nigeria

solar energy is the most abundant form of energy on Earth. solar energy brings impactful benefits and products that are expected to make homes more reliable, sustainable, and affordable. Thanks to technological advancements like the solar cell, we can gather this energy and turn it into electricity. The construction industry has an exceptional chance of benefiting from this sustainable energy. Many recognised benefits have been spelled forth in the construction industry, such as providing homes with clean energy with no trace of ozone depleting material emission. There are many people in Nigeria who are not linked to the public electric grid, and the energy sector produces and generates less than 58% of the entire amount of energy required. As stated in the Nigeria’s National Energy General Plan, the Sustainable Energy programme aims to enhance the country’s use of solar electricity. This paper focuses on the role of solar energy in the provision of sustainable affordable housing in Nigeria. It considers the description, method, and utilisation of solar energy with a focus on residential and commercial buildings.

关键词： Sustainable Affordable Housing solar irradiation solar Energy System solar Electricity Sustainable Development

Analysis for Effects of Temperature Rise of PV Modules upon Driving Distance of Vehicle Integrated Photovoltaic Electric Vehicles

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy and Power Engineering 2024年第4期16卷 131-150页

作者： Masafumi Yamaguchi Yasuyuki Ota Taizo Masuda Christian Thiel Anastasios Tsakalidis Arnulf Jaeger-Waldau Kenji Araki Kensuke Nishioka Tatsuya Takamoto Takashi Nakado Kazumi Yamada Tsutomu Tanimoto Yosuke Tomita Yusuke Zushi Kenichi Okumura Takashi Mabuchi Akinori Satou Kyotaro Nakamura Ryo Ozaki Nobuaki Kojima Yoshio Ohshita Toyota Technological Institute Nagoya Japan Faculty of Engineering Miyazaki University Miyazaki Japan Toyota Motor Corporation Susono Japan European Commission— Joint Research Centre Ispra Italy Sharp Corporation Nara Japan Toyota Motor Corporation Toyota Japan Nissan Motor Corporation Yokosuka Japan

The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO2 emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV.

关键词： Vehicle Integrated Photovoltaics (VIPV) VIPV-Powered Electric Vehicles Driving Distance PV Modules solar irradiation Temperature Rise Radiative Cooling

Performance of Water in Glass Evacuated Tube solar Water Heater under Kenya Climatic Condition

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computational Water, Energy, and Environmental Engineering 2021年第2期10卷 37-48页

作者： Ernest Kyekyere Hiram Ndiritu Meshack Hawi Polline Mwambe Department of Mechanical Engineering Pan African University Institute for Basic Sciences Technology and Innovation Nairobi Kenya Department of Mechanical Engineering Jomo Kenyatta University of Agriculture and Technology Nairobi Kenya

solar water heaters which provide a cost-effective and environmental friendly approach to hot water generation are in widespread application. Evacuated tube solar water heaters perform better than flat plate solar water heaters as a result of their greater surface area exposed for sunlight absorption. Water-in-glass evacuated tube solar water heaters are widely used as compared to heat-pipe solar water heaters due to their short payback periods. In this study, the performance of water-in-glass evacuated tube solar water heater is investigated through experiments under the climatic conditions in Kenya. The results revealed a daily efficiency range of 0.58 - 0.65 and a daily final outlet temperature greater than 55°C given an initial temperature of 25°C.

关键词： solar Water Heater Water-in-Glass Evacuated Tube solar Collector solar irradiation

A Study of the Temperature Influence on Different Parameters of Mono-Crystalline Silicon Photovoltaic Module

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Power and Energy Engineering 2021年第6期9卷 29-42页

作者： Said Amar Mustapha Bahich Youness Bentahar Mohamed Afifi Elmostapha Barj Physics Department Faculty of Sciences Ben Msik Hassan II University Casablanca Morocco SIPE Laboratory ENSA Chouaib Doukkali University El Jadida Morocco Physics Department Faculty of Sciences Moulay Ismail University Meknes Morocco

In this article, the effect of temperature on the photovoltaic parameters of mono-crystalline silicon Photovoltaic Panel is undertaken, using the Matlab environment with varying module temperature in the range 25°C - 60°C at constant solar irradiations 200 - 500 W/m2. The results show that the temperature has a significant impact on the various parameters of the photovoltaic panel and it controls the quality and performance of the solar panel. The photovoltaic parameters are the current of short circuit Isc, the open circuit voltage Vco, the form factor FF, the maximum power Pmax as well as efficiency. The relative change of these photovoltaic parameters with temperature is also evaluated in this article. A DS-100M solar panel has been used as reference model. The results show also that the open circuit voltage, maximum power, fill factor and efficiency decrease with temperature, but the short circuit current increa

关键词： Module Temperature Photovoltaic Parameters solar irradiation solar Panel