检索结果-南通市图书馆

Green Energy & Environment 2023年第5期8卷 1469-1478页

作者： Jianzhi Xu Liping Duan Jiaying Liao Haowei Tang Jun Lin Xiaosi Zhou School of Chemistry and Materials Science Nanjing Normal UniversityNanjing210023China

KVPO_(4)F(KVPF)has been extensively investigated as the potential cathode material for potassium-ion batteries(PIBs)owing to its high theoretical capacity,superior operating voltage,and three-dimensional Kt conduction pathway.Nevertheless,the electrochemical behavior of KVPF is limited by the inherent poor electronic conductivity of the phosphate framework and unstable electrode/electrolyte interface.To address the above issues,this work proposes an infiltration-calcination method to confine the in-situ grown KVPF into the mesoporous carbon CMK-3(denoted KVPF@CMK-3).The assembled KVPF@CMK-3 nanocomposite features three-dimensional interconnected carbon channels,which not only offer abundant active sites and significantly accelerate K t/electron transport,but also prevent the growth of KVPF nanoparticle agglomerates,hence stabilizing the structure of the material.Additionally,V–F–C bonds are created at the interface of KVPF and CMK-3,which reduce the loss of F and stabilize the electrode interface.Thus,when tested as a cathode material for PIBs,the KVPF@CMK-3 nanocomposite delivers superior reversible capacitiy(103.2 mAh g^(-1) at 0.2 C),outstanding rate performance(90.1 mAh g^(-1) at 20 C),and steady cycling performance(92.2 mAh g^(-1) at 10 C and with the retention of 88.2%after 500 cycles).Moreover,its potassium storage mechanism is further examined by ex-situ XRD and ex-situ XPS techniques.The above synthetic strategy demonstrates the potential of KVPF@CMK-3 to be applied as the cathode for PIBs.

关键词： potassium-ion batteries Cathode KVPO_(4)F CMK-3 V–F–C bond

Trimming the Degrees of Freedom via a K^(+) Flux Rectifier for Safe and Long‑Life potassium‑ion batteries

在线全文

学校读者我要写书评

暂无评论

纳微快报:英文版 2023年第11期15卷 157-171页

作者： Xianhui Yi Apparao MRao Jiang Zhou Bingan Lu School of Physics and Electronics Hunan UniversityChangsha 410082People’s Republic of China Department of Physics and Astronomy Clemson Nanomaterials InstituteClemson UniversityClemsonSC 29634USA School of Materials Science and Engineering Central South UniversityChangsha 410083People’s Republic of China State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082People’s Republic of China

High degrees of freedom(DOF)for K^(+)movement in the electrolytes is desirable,because the resulting high ionic conductivity helps improve potassium-ion batteries,yet requiring support from highly free and flammable organic solvent molecules,seriously affecting battery safety.Here,we develop a K^(+)flux rectifier to trim K ion’s DOF to 1 and improve electrochemical properties.Although the ionic conductivity is compromised in the K^(+)flux rectifier,the overall electrochemical performance of PIBs was improved.An oxidation stability improvement from 4.0 to 5.9 V was realized,and the formation of dendrites and the dissolution of organic cathodes were inhibited.Consequently,the K||K cells continuously cycled over 3,700 h;K||Cu cells operated stably over 800 cycles with the Coulombic efficiency exceeding 99%;and K||graphite cells exhibited high-capacity retention over 74.7%after 1,500 cycles.Moreover,the 3,4,9,10-perylenetetracarboxylic diimide organic cathodes operated for more than 2,100 cycles and reached year-scale-cycling time.We fabricated a 2.18 Ah pouch cell with no significant capacity fading observed after 100 cycles.

关键词： Electrolytes Degrees of freedom Safe Coulombic efficiency potassium-ion batteries

Rational design of ultrafine FeSe_(2) nanocrystals emb e dde d within hollow mesoporous carbon bowls for potassium-ion batteries with long-term cycling stability and high volumetric capacity

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第12期143卷 129-139页

作者： Yu Jin Jang Hong Geun Oh Seung-Keun Park Department of Advanced Materials Engineering Chung-Ang University4726Seodong-daeroDaedeok-myeonAnseong-siGyeonggi-do 17546Republic of Korea

Hollow structures are commonly used to alleviate the mechanical stress on electrode materials and to provide more active sites in potassium-ion batteries(KIBs).Nevertheless,the excessive internal voids within these structures significantly reduce the packing density of particles,resulting in a relatively low volumetric energy density of the fabricated electrodes,which is undesirable for practical use.We designed a hollow mesoporous carbon bowl embedded with ultrafine bis(selanylidene)iron(FeSe 2)nanocrystals(FeSe 2@HMCB)via a controllable impregnation method and subsequent selenization pro-cess for high-performance KIBs.The as-obtained FeSe 2@HMCB can inherit the advantages of conventional hollow carbon-based composites,such as alleviation of volume variation in active materials,abundant ion storage sites,and high electrical conductivity.Simultaneously,the bowl structure has a higher pack-ing density than the conventional hollow structure,resulting in a significant increase in the volumet-ric energy density of the fabricated electrodes.Because of these advantages,the FeSe 2@HMCB exhibits a high,stable reversible capacity of 326 mA h g^(-1) even after 1000 cycles at 0.5 A g^(-1),and excellent rate capacities(182 mA h g^(-1) at 3.0 A g^(-1)).Compared with the hollow structured counterpart,the vol-umetric capacity(mA h cm−3)of FeSe 2@HMCB increased by 60%.Furthermore,a full cell consisting of FeSe 2@HMCB//Prussian blue(PB)exhibits excellent electrochemical performance(99 mA h g^(-1) after 100 cycles at 0.1 A g^(-1)).

关键词： potassium-ion batteries Iron selenide Bowl-like structure Mesoporous carbon Anode material

S/N-co-doped graphite nanosheets exfoliated via three-roll milling for high-performance sodium/potassium ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第16期147卷 47-55页

作者： Xin Wang Zhicong Luo Juntong Huang Zhi Chen Tong Xiang Zhijun Feng Jing Wang Sinong Wang Yongcun Ma Huiyong Yang Xibao Li School of Materials Science and Engineering Nanchang Hangkong UniversityNanchang 330063China

Due to its larger ionic radius,further studies are needed before graphite can be used as an anode for sodium/potassium-ion batteries(SIBs/KIBs).It is believed that doping and increasing the layer spacing can improve the Na+/K+storage.Herein,S/N co-doped graphite nanosheets(GNS)with an enlarged interlayer spacing of 0.39 nm were prepared via exfoliation with three-roll milling(TRM)combined with thiourea heated at different temperatures.This method generates abundant defects and active sites for GNS,as well as facilitates rapid access and transport of electrolytes and electrons/ions.The electrochemical results show that the S/N-doped GNS exfoliated 15 times and heated at 600°C(SNGNS15-600)with thiourea as the electrode delivers a discharge capacity of 94 mAh g–1 over 6000 cycles at 10 A g–1 with an enhanced rate capability and stable performance for application in SIBs.Calculations using density functional theory show that the increased interlayer spacing by TRM and S,N co-doping enhances the adsorption energies of Na+on graphite,thus improving the Na+storage.As the anode for KIBs,the SNGNS15-600 electrode has a capacity of 142 mAh g–1 after 5000 cycles at 0.5 A g–1.This study provides an essential theoretical basis for the effective exfoliation of layered graphite-based materials and their applications in energy storage.

关键词： Graphite nanosheets S/N doping Three-roll milling Sodium-ion batteries potassium-ion batteries

Layered K_(0.54)Mn_(0.78)Mg_(0.22)O_(2)as a high-performance cathode material for potassium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2022年第4期15卷 3143-3149页

作者： Ruling Huang Qing Xue Jiao Lin XiXue Zhang Jiahui Zhou Feng Wu Li Li Renjie Chen Beijing Key Laboratory of Environmental Science and Engineering School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China State Key Laboratory of Advanced Power Transmission Technology Global Energy Interconnection Research Institute Co.Ltd.Beijing 102209China Guangdong Key Laboratory of Battery Safety Guangzhou Institute of Energy TestingGuangzhou 511447China Collaborative Innovation Center of Electric Vehicles in Beijing Beijing 100081China Institute of Advanced Technology Beijing Institute of TechnologyJinan 250300China

Layered Mn-based oxides are one of the promising cathode materials for potassium-ion batteries(KIBs)owing to their high theoretical capacities,abundant material supply,and simple synthesis method.However,the structural deterioration resulting from the Jahn-Teller effect of Mn ions hinders their further development in KIBs.Herein,a novel Mn-based layered oxide,K_(0.54)Mn_(0.78)Mg_(0.22)O_(2),is successfully designed and fabricated as KIBs cathode for the first time.It delivers smooth charging/discharging curves with high specific capacity of 132.4 mAh·g^(‒1)at 20 mA·g^(‒1)and good high-rate cycling stability with a capacity retention of 84%over 100 cycles at 200 mA·g^(‒1).Combining in-situ X-ray diffraction(XRD)and ex-situ X-ray photoelectron spectroscopy(XPS)analysis,the storage of K-ions by K_(0.54)Mn_(0.78)Mg_(0.22)O_(2)is revealed to be a solid-solution processes with reversible slip of the crystal lattice.The studies suggest that the rational doping of inactive Mg2+can effectively suppress the Jahn-Teller effect and provide outstanding structure stability.This work deepens the understanding of the structural evolution of Mn-based layered materials doped with inactive materials during de/potassiation processes.

关键词： potassium-ion batteries layered metal oxide cathode Jahn−Teller effect Mg doping structural deterioration

SnTe nanoparticles physicochemically encapsulated by double carbon as conversion-alloying anode materials for superior potassium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第27期158卷 86-95页

作者： Ting Li Yikun Wang Qianwen Zhou Lingling Yuan Shuangyan Qiao Meng Ma Zhengqing Liu Shaokun Chong Frontiers Science Center for Flexible Electronics(FSCFE) Xi’an Institute of Flexible Electronics(IFE)and Xi’an Institute of Biomedical Materials&EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Research&Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063China

Telluride tin(SnTe)is a promising conversion-alloying anode for potassium-ion batteries(PIBs)due to its high theoretical specific capacity induced by multi-electron transport reaction and low operating voltage,whereas huge volume expansion and poor kinetics behavior become key scientific bottleneck limiting the battery performances.Herein,SnTe nanoparticles physicochemically wrapped by graphene and nitrogen-doped carbon(SnTe@rGO@NC)are proposed as anode materials for PIBs.The pre-electrostatic interaction urges the formation of Sn-C and Te-C chemical bonds between SnTe and double carbon to strengthen the interfacial stability and electron transfer,and the conductive architecture with hierarchical encapsulation effect is beneficial to maintaining the electrode integrity and electrochemical dynamics.It is demon-strated from first principles calculations and experimental results that SnTe@rGO@NC contributes fast electron transmission,strong K-ion adsorption,and superior K-ion diffusion capability.Ex-situ characteri-zations uncover that SnTe undergoes conversion-alloying dual-mechanism with the products of K_(2)Te and K_(4)Sn_(23)replied on Sn redox site(23SnTe+50K^(+)+50e^(-)↔K_(4)Sn_(23)+23K_(2)Te).Thus,the SnTe@rGO@NC electrode delivers a high initial charge specific capacity of 243.9 mAh g^(-1)at 50 mA g^(-1),superior rate performance(112.6 mAh g^(-1)at 1.0 A g^(-1)),and outstanding cyclic stability at various current densities.

关键词： potassium-ion batteries Anode materials Tin telluride Chemical bonding Conversion-alloying mechanism

Structural and electrochemical stabilization enabling high-energy P3-type Cr-based layered oxide cathode for K-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon Energy 2024年第5期6卷 81-93页

作者： Wonseok Ko Seokjin Lee Hyunyoung Park Jungmin Kang Jinho Ahn Yongseok Lee Gwangeon Oh Jung-Keun Yoo Jang-Yeon Hwang Jongsoon Kim Department of Energy Science Sungkyunkwan UniversitySuwonRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea Department of Energy Engineering Hanyang UniversitySeoulRepublic of Korea Carbon Composites Department Korea Institute of Materials Science(KIMS)ChangwonRepublic of Korea Department of Battery Engineering Hanyang UniversitySeoulRepublic of Korea

Layered-type transition metal(TM)oxides are considered as one of the most promising cathodes for K-ion batteries because of the large theoretical gravimetric capacity by low molar mass.However,they suffer from severe structural change by de/intercalation and diffusion of K^(+)ions with large ionic size,which results in not only much lower reversible capacity than the theoretical capacity but also poor power capability.Thus,it is important to enhance the structural stability of the layered-type TM oxides for outstanding electrochemical behaviors under the K-ion battery system.Herein,it is investigated that the substitution of the appropriate Ti^(4+)contents enables a highly enlarged reversible capacity of P3-type KxCrO_(2) using combined studies of first-principles calculation and various experiments.Whereas the pristine P3-type KxCrO_(2) just exhibits the reversible capacity of∼120 mAh g^(−1) in the voltage range of 1.5-4.0 V(vs.K^(+)/K),the∼0.61 mol K^(+)corresponding to∼150 mAh g^(−1) can be reversible de/intercalated at the structure of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) under the same conditions.Furthermore,even at the high current density of 788 mA g^(−1),the specific capacity of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) is∼120 mAh g^(−1),which is∼81 times larger than that of the pristine P3-type KxCrO_(2).It is believed that this research can provide an effective strategy to improve the electrochemical performances of the cathode materials suffered by severe structural change that occurred during charge/discharge under not only K-ion battery system but also other rechargeable battery systems.

关键词： cathodes first-principles calculations layered-type oxide materials potassium-ion batteries structural stabilization

Cocoon-shaped P3-type K0.5Mn0.7Ni0.3O2 as an advanced cathode material for potassium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2023年第1期76卷 332-338,I0008页

作者： Liping Duan Jianzhi Xu Yifan Xu Ruiqi Tian Yingying Sun Chuannan Zhu Xiangyin Mo Xiaosi Zhou Jiangsu Key Laboratory of New Power batteries Jiangsu Collaborative Innovation Center of Biomedical Functional MaterialsSchool of Chemistry and Materials ScienceNanjing Normal UniversityNanjing 210023JiangsuChina

potassium ion batteries(PIBs)are emerging as potential next-generation energy storage systems on account of their low cost and high theoretical energy density.Nevertheless,they also face challenges of low specific capacity and suboptimal cycling stability.Herein,we synthesize a cocoon-like P3-type K_(0.5)Mn_(0.7)Ni_(0.3)O_(2)(KMNO)cathode material by a self-template method.The KMNO cocoons possess a hierarchical layered architecture composed of nanoparticle stacking,which can accelerate the transport kinetics of potassium ions,mitigate the stress caused by K^(+)intercalation and deintercalation,and improve structural stability.In addition,Ni can not only alleviate the Jahn-Teller distortion and suppress the phase transition to stabilize the structure,but also act as an electrochemically active element,providing the capacity of two electrons from Ni2+to Ni4+.Combining the advantages of structure and nickel substitution,the P3-type KMNO cocoons are used for electrochemical performance testing of PIB cathodes,delivering an excellent rate capability of 57.1 m A h g^(-1)at 500 m A g^(-1)and a remarkable cycling stability of 77.0%over 300 cycles at 100 m A g^(-1).Impressively,the KMNO cocoons//pitch-derived soft carbon assembled full battery exhibits superior electrochemical performance with a reversible capacity of 79.7 m A h g^(-1)at 50 m A g^(-1).Moreover,ex-situ XRD also further reveals a solid solution phase reaction with a volume change of only 1.46%.This work furnishes a suitable approach to fabricating highperformance layered oxide cathodes for PIBs with outstanding cycling stability and rate capability.

关键词： Layered metal oxides Cathode potassium-ion batteries Cocoons Ex-situ XRD

Recent Developments of Antimony-Based Anodes for Sodiumand potassium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Transactions of Tianjin University 2022年第1期28卷 6-32页

作者： Bochao Chen Ming Liang Qingzhao Wu Shan Zhu Naiqin Zhao Chunnian He School of Materials Science and Engineering Tianjin Key Laboratory of Composite and Functional MaterialsTianjin UniversityTianjin 300072China Joint School of National University of Singapore and Tianjin University International Campus of Tianjin UniversityBinhai New CityFuzhou 350207China Collaborative Innovation Center of Chemical Science and Engineering Tianjin 300072China Key Laboratory of Advanced Ceramics and Machining Technology Ministry of EducationTianjin UniversityTianjin 300072China

The development of sodium-ion(SIBs)and potassium-ion batteries(PIBs)has increased rapidly because of the abundant resources and cost-effectiveness of Na and K.Antimony(Sb)plays an important role in SIBs and PIBs because of its high theoretical capacity,proper working voltage,and low cost.However,Sb-based anodes have the drawbacks of large volume changes and weak charge transfer during the charge and discharge processes,thus leading to poor cycling and rapid capacity decay.To address such drawbacks,many strategies and a variety of Sb-based materials have been developed in recent years.This review systematically introduces the recent research progress of a variety of Sb-based anodes for SIBs and PIBs from the perspective of composition selection,preparation technologies,structural characteristics,and energy storage behaviors.Moreover,corresponding examples are presented to illustrate the advantages or disadvantages of these anodes.Finally,we summarize the challenges of the development of Sb-based materials for Na/K-ion batteries and propose potential research directions for their further development.

关键词： Sodium-ion batteries potassium-ion batteries Sb-based materials Energy storage

Ultra-thick,dense dual-encapsulated Sb anode architecture with conductively elastic networks promises potassium-ion batteries with high areal and volumetric capacities

在线全文

学校读者我要写书评

暂无评论

eScience 2023年第6期3卷 58-68页

作者： Zhonggang Liu Xi Liu Bingchun Wang Xinying Wang Dongzhen Lu Dijun Shen Zhefei Sun Yongchang Liu Wenli Zhang Qiaobao Zhang Yunyong Li School of Materials and Energy Guangdong University of TechnologyNo.100 Waihuan Xi RoadGuangzhou Higher Education Mega CenterGuangzhou 510006China State Key Laboratory of Physical Chemistry of Solid Surfaces College of MaterialsXiamen UniversityXiamenFujian 361005China Beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyState Key Laboratory for Advanced Metals and MaterialsUniversity of Science and Technology BeijingBeijing 100083China Guangdong Provincial Key Laboratory of Plant Resources Biorefinery School of Chemical Engineering and Light IndustryGuangdong University of TechnologyNo.100 Waihuan Xi RoadGuangzhou Higher Education Mega CenterGuangzhou 510006China

Ultra-thick,dense alloy-type anodes are promising for achieving large areal and volumetric performance in potassium-ion batteries(PIBs),but severe volume expansion as well as sluggish ion and electron diffusion kinetics heavily impede their widespread application.Herein,we design highly dense(3.1 g cm^(-3))Ti_(3)C_(2)T_(x) MXene and graphene dual-encapsulated nano-Sb monolith architectures(HD-Sb@Ti_(3)C_(2)T_(x)-G)with high-conductivity elastic networks(1560 S m^(-1))and compact dually encapsulated structures,which exhibit a large volumetric capacity of 1780.2 mAh cm^(-3)(gravimetric capacity:565.0 mAh g^(-1)),a long-term stable lifespan of 500 cycles with 82%retention,and a large areal capacity of 8.6 mAh cm^(-2)(loading:31 mg cm^(-2))in PIBs.Using ex-situ SEM,in-situ TEM,kinetic investigations,and theoretical calculations,we reveal that the excellent areal and volumetric performance mechanism stems from the three dimensional(3D)high-conductivity elastic networks and the dualencapsulated Sb architecture of Ti_(3)C_(2)T_(x) and graphene;these effectively mitigate against volume expansion and the pulverization of Sb,offering good electrolyte penetration and rapid ionic/electronic transmission.Ti_(3)C_(2)T_(x) also decreases the Kþdiffusion energy barrier,and the ultra-thick compact electrode ensures volumetric and areal performance.These findings provide a feasible strategy for fabricating ultra-thick,dense alloy-type electrodes to achieve high areal and volumetric capacity energy storage via highly-dense,dual-encapsulated architectures with conductive elastic networks.

关键词： Antimony Dually encapsulated structure Compact monolith Areal capacity Volumetric capacity potassium-ion batteries