检索结果-南通市图书馆

outlet temperature Correlation and Prediction of Transfer Line Exchanger in an Industrial Steam Ethylene Cracking Process

引用

Chinese Journal of Chemical Engineering 2013年第4期21卷 388-394页

作者：金阳坤李进龙杜文莉王振雷钱锋 Key Laboratory of Advanced Control and Optimization for Chemical Processes of Ministry of Education East China University of Science and Technology Shanghai 200237 China Institute of Automation East China University of Science and Technology Shanghai 200237 China

Predicting the best shutdown time of a steam ethylene cracking furnace in industrial practice remains a challenge due to the complex coking process. As well known, the shutdown time of a furnace is mainly determined by coking condition of the transfer line exchangers （TLE） when naphtha or other heavy hydrocarbon feedstocks are cracked. In practice, it is difficult to measure the coke thickness in TLE through experimental method in the complex industrial situation. However, the outlet temperature of TLE （TLEOT） can indirectly characterize the coking situation in TLE since the coke accumulation in TLE has great influence on TLEOT. Thus, the TLEOT could be a critical factor in deciding when to shut down the furnace to decoke. To predict the TLEOT, a paramewic model was proposed in this work, based on theoretical analysis, mathematic reduction, and parameters estimation. The feasibility of the proposed model was further checked through industrial data and good agreements between model prediction and industrial data with maximum deviation 2% were observed.

关键词： transfer line exchanger outlet temperature parametric model steam ethylene cracking

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sensitivity analysis of borehole thermal energy storage: examining key factors for system optimization

引用

Energy Storage and Saving 2024年第3期3卷 218-230页

作者： Piyush Kumar Kumawat Haiyan Zhou Kevin Kitz John McLennan Kody Powell Milind Deo Palash Panja Department of Chemical Engineering University of UtahSalt Lake CityUT 84112USA Energy&Geoscience Institute University of UtahSalt Lake CityUT 84108USA RESPEC Company LLC Rapid CitySD 57703USA Kitzworks LLC BoiseID 83717USA

Borehole thermal energy storage(BTES)systems have garnered significant attention owing to their efficacy in storing thermal energy for heating and cooling *** modeling is paramount for ensuring the precise design and operation of BTES *** study conducts a sensitivity analysis of BTES modeling by employing a comparative investigation of five distinct parameters on a wedge-shaped model,with implications extendable to a cylindrical *** parameters examined included two design factors(well spacing and grout thermal conductivity),two operational variables(charging and discharging rates),and one geological attribute(soil thermal conductivity).Finite element simulations were carried out for the sensitivity analysis to evaluate the round-trip efficiency,both on a per-cycle basis and cumulatively over three years of operation,serving as performance *** results showed varying degrees of sensitivity across different models to changes in these *** particular,the round-trip efficiency exhibited a greater sensitivity to changes in spacing and volumetric flow ***,this study underscores the importance of considering the impact of the soil and grout-material thermal conductivities on the BTES-system performance over *** optimized scenario is modelled and compared with the base case,over a comparative assessment based on a 10-year *** analysis revealed that,at the end of the 10-year period,the optimized BTES model achieved a cycle efficiency of 83.4%.This sensitivity analysis provides valuable insights into the merits and constraints of diverse BTES modeling methodologies,aiding in the selection of appropriate modeling tools for BTES system design and operation.

关键词： Borehole thermal energy storage(BTES) outlet temperature Round-trip efficiency Heating and cooling modes Well spacing Grout thermal conductivity Charging and discharging rates Soil thermal conductivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

INFLUENCE OF SPRAY WATER FLOW RATE ON PERFORMANCES OF COUNTERFLOW CLOSED CIRCUIT COOLING TOWERS IN AIR CONDITIONING SYSTEMS

INFLUENCE OF SPRAY WATER FLOW RATE ON PERFORMANCES OF COUNTE...

引用

International Symposium of Air Conditioning in High Rise Buildings’2000

作者： Li Yong’an Yu MingzhiShandong Institute of Architecture and Engineering Jinan 250014 P.R.CHINAShang Fengwei Shangdong Xinlu Construction Development Co.Ltd Jinan 250061 P.R.CHINAXie Pin Shanghai Jiaotong University Shanghai 200030 P.R.CHINA

＜正＞ This paper describes counterflow closed circuit cooling towers made by authors. The new cooling towers have many functions, low noise, safe and fire prevention, energy conservation etc. and they find wide *** mathematical models of the counterflow closed circuit are established in terms of mass and heat balances. It is calculated that outlet temperature of cooling water varies with spray water flow rate. Performance curve of the cooling towers is drawn. Results of theoretical calculation are found to be close to the experimental data.

关键词： counterflow closed circuit cooling towers spray water flow rate outlet temperature wet bulb temperature performance

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：