检索结果-南通市图书馆

An analysis approach of mass and energy balance in a dual-reactor circulating fluidized bed system

Chinese Journal of Chemical Engineering 2021年第12期34卷 18-26页

作者： Yangjun Wei Leming Cheng Liyao Li Institute for Thermal Power Engineering State Key Laboratory of Clean Energy UtilizationZhejiang UniversityHangzhou 310027China

An analysis approach considering gas-solids hydrodynamics,reaction kinetics and reacting species nonuniformity together in a dual-reactor system is presented for better understanding its mass and energy *** was achieved by a 3-dimensional comprehensive hydrodynamics and reaction model for the dual-reactor system,which was developed from the successfully verified 3-dimensional comprehensive combustion model for one circulating fluidized bed(CFB)system(Xu and Cheng,2019).The developed model and analysis approach was successfully used on a 1 MW circulating fluidized bed–bubbling fluidized bed(CFB-BFB)dual-reactor *** showed the sensible and chemical energy between two reactors as well as the energy distributions in each reactor were balanced and they agreed well with the experimental *** analysis approach indicated energy balance had a close relationship with the mass transfer in the CFB-BFB dual-reactor *** may be applied in a design and operation optimization for a dual-reactor system.

关键词： mass and energy balance circulating fluidized bed–bubbling fluidized bed Dual-reactor Comprehensive model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Simulation and Techno-Economic Performance of a Novel Charge Calculation and Melt Optimization Planning Model for Steel Making

引用

Journal of Minerals and Materials Characterization and Engineering 2020年第4期8卷 277-300页

作者： Onigbajumo Adetunji Saliu Ojo Seidu School of Mechanical Medical and Process Engineering Queensland University of Technology Brisbane Australia Department of Metallurgical and Materials Engineering Federal University of Technology Akure Ondo State Nigeria

Process algorithm, numerical model and techno-economic assessment of charge calculation and furnace bath optimization for target alloy for induction furnace-based steelmaking is presented in this study. The developed algorithm combines the make-to-order (MTO) and charge optimization planning (COP) of the steel melting shop in the production of target steel composition. Using a system-level approach, the unit operations involved in the melting process were analyzed with the purpose of initial charge calculation, prevailing alloy charge prediction and optimizing the sequence of melt chemistry modification. The model performance was established using real-time production data from a cast iron-based foundry with a 1- and 2-ton induction furnace capacity and a medium carbon-based foundry with a 10- and 15-ton induction furnace capacity. A simulation engine (CastMELT) was developed in Java IDE with a MySQL database for continuous interaction with changing process parameters to run the model for validation. The comparison between the model prediction and production results was analyzed for charge prediction, melt modification and ferroalloy optimization and possible cost savings. The model performance for elemental charge prediction and calculation purpose with respect to the charge input (at overall scrap meltdown) gave R-squared, Standard Error, Pearson correlation and Significance value of (0.934, 0.06, 0.97, 0.0003) for Carbon prediction, (0.962, 0.06, 0.98, 0.00009) for Silicon prediction, (0.999, 0.048, 0.999, 9E -11) for Manganese Prediction, and (0.997, 0.076, 0.999, 6E -7) for Chromium prediction respectively. Correlation analysis for melt modification (after charging of ferroalloy) using the model for after-alloying spark analysis compared with the target chemistry is at 99.82%. The results validate the suitability of the developed model as a functional system of induction furnace melting for combined charge calculation and melt optimization Techno-economic evalu

关键词： Charge Calculation Process Simulation Modelling Induction Furnace Steel Making Techno-Economics mass and energy balance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Melting Time Prediction Model for Induction Furnace Melting Using Specific Thermal Consumption from Material Charge Approach

引用

Journal of Minerals and Materials Characterization and Engineering 2021年第1期9卷 61-74页

作者： Onigbajumo Adetunji Seidu Saliu Ojo Akinlabi Oyetunji Newton Itua School of Mechanical Medical and Process Engineering Queensland University of Technology Brisbane Australia Department of Metallurgical and Materials Engineering Federal University of Technology Akure Ondo State Nigeria

A system-level evaluation was used to analyze the induction furnace operation and process system in this study. This paper presents an investigation into the relationship between the instantaneous chemical composition of a molten bath and its energy consumption in steelmaking. This was evaluated using numerical modelling to solve for the estimated melting time prediction for the induction furnace operation. This work provides an insight into the lowering of energy consumption and estimated production time in steelmaking using material charge balancing approach. Enthalpy computation was implemented to develop an energy consumption model for the molten metal using a specific charge composition approach. Computational simulation program engine (CastMELT) was also developed in Java programming language with a MySQL database server for seamless specific charge composition analysis and testing. The model performance was established using real-time production data from a cast iron-based foundry with a 1 and 2-ton induction furnace capacity and a medium carbon-based foundry with a 10- and 15-ton induction furnace capacity. Using parameter fitting techniques on the measured operational data of the induction furnaces at different periods of melting, the results from the model predictions and real-time melting showed good correlation between 81% - 95%. A further analysis that compared the relationship between the mass composition of a current molten bath and melting, time showed that energy consumption can be reduced with effective material balancing and controlled charge. Melting time was obtained as a function of the elemental charge composition of the molten bath in relation to the overall scrap material charge. This validates the approach taken by this research using material charge and thermodynamic of melting to optimize and better control melting operation in foundry and reduce traditional waste during iron and steel making.

关键词： Charge Calculation mass and energy balance Melting Time Optimization Induction Furnace Numerical Model Iron and Steelmaking CastMELT

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：