检索结果-南通市图书馆

Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide

引用

Nano-Micro Letters 2024年第9期16卷 557-570页

作者： Jingjing Liu Biao Shi Qiaojing Xu Yucheng Li Yuxiang Li Pengfei Liu Zetong SunLi Xuejiao Wang Cong Sun Wei Han Diannan Li Sanlong Wang Dekun Zhang Guangwu Li Xiaona Du Ying Zhao Xiaodan Zhang Renewable Energy Conversion and Storage Center Solar Energy Conversion CenterInstitute of Photoelectronic Thin Film Devices and TechnologyNankai UniversityTianjin 300350People’s Republic of China Key Laboratory of Photoelectronic Thin Film Devices and Technology of Tianjin Tianjin 300350People’s Republic of China Haihe Laboratory of Sustainable Chemical Transformations Tianjin 300192People’s Republic of China Engineering Research Center of Thin Film Photoelectronic Technology of Ministry of Education Tianjin 300350People’s Republic of China Collaborative Innovation Center of Chemical Science and Engineering(Tianjin) Tianjin 300072People’s Republic of China Center of Single‑Molecule Sciences Institute of Modern OpticsTianjin Key Laboratory of Micro‑Scale Optical Information Science and TechnologyCollege of Electronic Information and Optical EngineeringNankai University38 Tongyan RoadJinnan DistrictTianjin 300350People’s Republic of China Shenzhen Research Institute of Nankai University 16Th FloorYantian Science and Technology BuildingHaishan StreetYantian DistrictShenzhen 518083People’s Republic of China

Monolithic textured perovskite/silicon tandem solar cells(TSCs)are expected to achieve maximum light capture at the lowest cost,potentially exhibiting the best power conversion ***,it is challenging to fabricate high-quality perovskite films and preferred crystal orientation on commercially textured silicon substrates with micrometersize ***,we introduced a bulky organic molecule(4-fluorobenzylamine hydroiodide(F-PMAI))as a perovskite *** is found that F-PMAI can retard the crystallization process of perovskite film through hydrogen bond interaction between F^(−)and FA^(+)and reduce(111)facet surface energy due to enhanced adsorption energy of F-PMAI on the(111)***,the bulky molecular is extruded to the bottom and top of perovskite film after crystal growth,which can passivate interface defects through strong interaction between F-PMA+and undercoordinated Pb^(2+)/I^(−).As a result,the additive facilitates the formation of large perovskite grains and(111)preferred orientation with a reduced trap-state density,thereby promoting charge carrier transportation,and enhancing device performance and *** perovskite/silicon TSCs achieved a champion efficiency of 30.05%based on a silicon thin film tunneling *** addition,the devices exhibit excellent longterm thermal and light stability without *** work provides an effective strategy for achieving efficient and stable TSCs.

关键词： Perovskite crystallization (111)preferred orientation defect passivation Perovskite/silicon tandem solar cells

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interfacial modification using the cross-linkable tannic acid for highly-efficient perovskite solar cells with excellent stability

引用

Journal of Energy Chemistry 2024年第4期91卷 236-244页

作者： Xing Gao Lirong Rong Fei Wu Yen-Hung Lin Ye Zeng Junhong Tan Rongxing He Cheng Zhong Linna Zhu Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energy School of Materials&EnergySouthwest UniversityChongqing 400715China Hubei Key Lab on Organic and Polymeric Optoelectronic Materials Department of ChemistryWuhan UniversityWuhan 430072HubeiChina Key Laboratory of Luminescence Analysis and Molecular Sensing Ministry of EducationSchool of Chemistry and Chemical EngineeringSouthwest UniversityChongqing 400715China Department of Electronic and Computer Engineering The Hong Kong University of Science and TechnologyClear Water BayKowloon 999077Hong KongChina State Key Laboratory of Advanced Displays and Optoelectronics Technologies The Hong Kong University of Science and TechnologyClear Water BayKowloon 999077Hong KongChina

Although the performance of perovskite solar cells(PSCs)has been dramatically increased in recent years,stability is still the main obstacle preventing the PSCs from being *** device instability can be caused by a variety of reasons,including ions diffusion,surface and grain boundary defects,*** this work,the cross-linkable tannic acid(TA)is introduced to modify perovskite film through post-treatment *** numerous organic functional groups(–OH and C=O)in TA can interact with the uncoordinated Pb^(2+)and I^(-)ions in perovskite,thus passivating defects and inhibiting ions *** addition,the formed TA network can absorb a small amount of the residual moisture inside the device to protect the perovskite ***,TA modification regulates the energy level of perovskite,and reduces interfacial charge ***,following TA treatment,the device efficiency is increased significantly from 21.31%to 23.11%,with a decreased hysteresis ***,the treated device shows excellent air,thermal,and operational *** light of this,the readily available,inexpensive TA has the potential to operate as a multipurpose interfacial modifier to increase device efficiency while also enhancing device stability.

关键词： Tannic acid defect passivation lons diffusion Hydrophilic Stability Perovskite solar cells

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dramatic reduction in dark current ofβ-Ga_(2)O_(3) ultraviolet photodectors viaβ-(Al_(0.25)Ga_(0.75))_(2)O_(3) surface passivation

引用

Chinese Physics B 2023年第1期32卷 415-420页

作者：岳建英季学强李山岐晓辉李培刚吴真平唐为华 Laboratory of Optoelectronics Materials and Devices School of ScienceBeijing University of Posts and TelecommunicationsBeijing 100876China State Key Laboratory of Information Photonics and Optical Communications Beijing University of Posts and TelecommunicationsBeijing 100876China College of Electronic and Optical Engineering&College of Microelectronics National and Local Joint Engineering Laboratory for RF Integration and Micro-Packaging TechnologiesNanjing University of Posts and TelecommunicationsNanjing 210046China

Solar-blind ultraviolet photodetectors with metal-semiconductor-metal structure were fabricated based onβ-(Al_(0.25)Ga_(0.75))_(2)O_(3)/β-Ga_(2)O_(3) film grown by metal-organic chemical vapor *** was known that various surface states increase dark current and a large number of defects can hinder the transport of carriers,resulting in low switching ratio and low responsivity of the *** this work,β-(Al_(0.25)Ga_(0.75))_(2)O_(3) films are used as surface passivation *** to its wide band gap,we obtain excellent light transmission and high lattice matching withβ-Ga_(2)O_(3).We explore the change and mechanism of the detection performance of theβ-Ga_(2)O_(3) detector afterβ-(Al_(0.25)Ga_(0.75))_(2)O_(3) surface *** is found that under the illumination with 254 nm light at bias 5 V,theβ-(Al_(0.25)Ga_(0.75))_(2)O_(3)/β-Ga_(2)O_(3)photodetectors show dark current of just 18 pA and high current on/off ratio of 2.16×10^(5).The dark current is sharply reduced about 50 times after passivation of theβ-Ga_(2)O_(3) surface,and current on/off ratio increases by approximately 2 *** is obvious thatβ-Ga_(2)O_(3) detectors withβ-(Al_(0.25)Ga_(0.75))_(2)O_(3) surface passivation can offer superior detector performance.

关键词： β-(Al_(0.25)Ga_(0.75))_(2)O_(3)/β-Ga_(2)O_(3) MOCVD photodetectors defect passivation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Unravel the Charge-Carrier Dynamics in Simple Dimethyl Oxalate-Treated Perovskite Solar Cells with Efficiency Exceeding 22%

引用

Energy & Environmental Materials 2023年第5期6卷 219-227页

作者： Rongjun Zhao Tai Wu Rongshan Zhuang Yong Hua Yude Wang Yunnan Key Laboratory for Micro/Nano Materials&Technology School of Materials and EnergyYunnan UniversityKunming 650504China Key Lab of Quantum Information of Yunnan Province Yunnan UniversityKunming 650504China

Understanding the effect of additive on the interfacial charge-carrier transfer dynamics is very crucial to obtaining highly efficient perovskite solar cells(PSCs).Herein,we designed a simple additive,dimethyl oxalate(DO),functioning as an effective defect passivator of perovskite grain boundaries via the coordination interaction between the carbonyl(C=O)and the exposed Pb^(2+).The modification with DO produces pinhole-free and compact perovskite films,enhancing the transportation capability of *** a consequence,the DO-treated PSCs exhibited a power conversion efficiency(PCE)of 22.19%,which is significantly higher than that of the control device without additive(19.58%).More importantly,detailed transient absorption characterization reveals that the use of additive can decrease the hot-carrier cooling dynamics,improve the carrier transfer,and eliminate nonradiative recombination in *** present work provides a profound understanding the additives effect on the carrier dynamics in PSCs toward the Shockley-Queisser limit.

关键词： additive engineering carrier dynamics defect passivation Perovskite solar cell

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of the incorporation amounts of CdS and Cd(SCN_(2)H_(4))_(2)Cl_(2)on the performance of perovskite solar cells

引用

International Journal of Minerals,Metallurgy and Materials 2022年第2期29卷 283-291页

作者： Jihong Zheng Liangxin Zhu Zhitao Shen Fumin Li Lanyu Ling Huilin Li Chong Chen Henan Key Laboratory of Photovoltaic Materials Henan UniversityKaifeng 475004China School of Physics and Electronics Henan UniversityKaifeng 475004China

An excellent organolead halide perovskite film is important for the good performance of perovskite solar cells(PSCs).However,defects in perovskite crystals can affect the photovoltaic properties and stability of solar *** solve this problem,this study incorporated a complex of Cd S and Cd(SCN_(2)H_(4))_(2)Cl_(2)into the CH_(3)NH_(3)Pb I_(3)active *** effects of different doping concentrations of Cd S and Cd(SCN_(2)H_(4))_(2)Cl_(2)on the performance and stability of PSCs were *** showed that doping appropriate incorporation concentrations of Cd S and Cd(SCN_(2)H_(4))_(2)Cl_(2)in CH_(3)NH_(3)Pb I_(3)can improve the performance of the prepared solar *** specific,Cd S and Cd(SCN_(2)H_(4))_(2)Cl_(2)can effectively passivate the defects in perovskite crystals,thereby suppressing the charge recombination in PSCs and promoting the charge extraction at the TiO_(2)/perovskite *** to the reduction of perovskite crystal defects and the enhancement of compactness of the Cd S:Cd(SCN_(2)H4)_(2)Cl_(2):CH_(3)NH_(3)Pb I_(3)composite film,the stability of PSCs is significantly improved.

关键词： perovskite solar cells charge extraction defect passivation incorporation concentration

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bridging buried interface enable 24.67%-efficiency doctor-bladed perovskite solar cells in ambient condition

引用

Nano Research 2024年第9期17卷 8068-8076页

作者： Jianhui Chang Erming Feng Xiangxiang Feng Hengyue Li Yang Ding Caoyu Long Siyuan Lu Haixia Zhu Wen Deng Jiayan Shi Yingguo Yang Si Xiao Yongbo Yuan Junliang Yang Hunan Key Laboratory for Super-microstructure and Ultrafast Process School of PhysicsCentral South UniversityChangsha 410083China Hunan Key Laboratory of Nanophotonics and Devices School of PhysicsCentral South UniversityChangsha 410083China Textile and Fashion Collage Hunan Institute of EngineeringXiangtan 411101China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China

Scalable deposition of high-efficiency perovskite solar cells(PSCs)is critical to accelerating their commercial ***,a significant number of defects are distributed at the buried interface of perovskite film fabricated by scalable deposition,exhibiting much negative influence on the efficiency and stability of ***,2-(N-morpholino)ethanesulfonic acid potassium salt(MESK)is incorporated as the bridging layer between the tin oxide(SnO_(2))electron transport layer(ETL)and the perovskite film deposited via scalable two-step doctor *** experiment and simulation results demonstrate that MESK can passivate the trap states of Sn suspension bonds,thereby enhancing the charge extraction and transport of the SnO_(2)***,the strong interaction with uncoordinated Pb ions can modulate the crystal growth and crystallographic orientation of perovskite film and passivate buried *** employing MESK interface bridging,PSCs fabricated via scalable doctor blading in ambient condition achieve a power conversion efficiency(PCE)of 24.67%,which is one of the highest PCEs for doctor-bladed PSCs,and PSC modules with an active area of 11.35 cm^(2)achieve a PCE of 19.45%.Furthermore,PSCs exhibit excellent long-term stability,and the unpackaged target device with a storage of 1680 h in ambient condition(25℃and humidity of 30%relative humidity(RH))can maintain more than 90%of the initial *** research provides a strategy for constructing a high-performance interface bridge between SnO_(2)ETL and perovskite film,and achieving efficient and stable large-area PSCs and modules fabricated via scalable doctor-blading process in ambient condition.

关键词： perovskite solar cells doctor blading buried interface defect passivation orientation regulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Simultaneous bottom-up double-layer synergistic engineering by multifunctional natural molecules for efficient and stable SnO2-based planar perovskite solar cells

引用

Journal of Energy Chemistry 2023年第5期80卷 40-47,I0002页

作者： Yue Liu Yanbo Gao Tingting Li Xinyu Bao Zehua Xu Fujun Zhang Min Lu Zhennan Wu Yanjie Wu Guang Sun Xue Bai Zhifeng Shi Junhua Hu Yu Zhang State Key Laboratory of Integrated Optoelectronics College of Electronic Science and EngineeringJilin University2699 Qianjin StreetChangchun 130012 JilinChina School of Materials Science and Engineering Jilin Jianzhu UniversityChangchun 130018JilinChina China-Japan Union Hospital Jilin UniversityChangchun 130012jilinChina Key Laboratory of Materials Physics of Ministry of Education Department of Physics and EngineeringZhengzhou UniversityZhengzhou 402HenanChin State Centre for International Cooperation on Designer Low-carbon&Environmental Materials School of Materials Science and EngineeringZhengzhou UniversityZhengzhou 450001HenanChina

The performance and stability of perovskite solar cells(PSCs)is limited by detrimental defects,mostly distributed at the grain boundary(GB)of bulk perovskite film and interface,which induce serious carrier non-radiative ***,there is particularly urgent to realize simultaneous passivation of bulk defects and interfacial *** this work,a simple,low-cost and effective multifunctional modification strategy is developed by introducing theλ-Carrageenan(λ-C)as the interfacial layer of SnO_(2)/*** sulfate groups ofλ-C not only play a positive role in passivating the Sn4+from SnO_(2)film,resulting in high conductivity,but also effectively passivate the defects at the SnO_(2)/perovskite ***,λ-C can effectively passivate the defects in the perovskite film due to the strong binding force between the high content of sulfate groups and *** synergistic effect ofλ-C simultaneously achieves interfacial defects and bulk defects passivation,better crystalline quality,suppressed charge recombination,released interfacial stress and more favorable interfacial energy level *** on the above efficient synergy,theλ-C-modified device achieves a high efficiency of 23.81%,which is~24.53%higher than the control device(19.12%).To our best knowledge,23.81%of power conversion efficiency(PCE)is the highest reported PCE value of PSCs employing green natural ***,long-term and thermal stabilities are significantly improved after interface ***,this work provides an idea for developing multifunctional natural materials towards the attainment of the efficient and stable PSCs.

关键词： Perovskite solar cells γ-Carrageenan Interfacial modification Stability defect passivation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multifunctional interfacial molecular bridge enabled by an aggregation-induced emission strategy for enhancing efficiency and UV stability of perovskite solar cells

引用

Journal of Energy Chemistry 2024年第8期95卷 588-595,I0013页

作者： Shuhang Bian Yuqi Wang Fancong Zeng Zhongqi Liu Bin Liu Yanjie Wu Long Shao Yongzhi Shao Huan Zhang Shuainan Liu Jin Liang Xue Bai Lin Xu Donglei Zhou Biao Dong Hongwei Song State Key Laboratory on Integrated Optoelectronics College of Electronic Science and EngineeringJilin UniversityChangchun 130012JilinChina College of Science Shanghai UniversityShanghai 200444China

The interface defects between the electron transport layer(ETL)and the perovskite layer,as well as the low ultraviolet(UV)light utilization rate of the perovskite absorption layer,pose significant challenges for the commercialization of perovskite solar cells(PSCs).To address this issue,this paper proposes an innovative multifunctional interface modulation strategy by introducing aggregation-induced emission(AIE)molecule 5-[4-[1,2,2-tri[4-(3,5-dicarboxyphenyl)phenyl]ethylene]phenyl]benzene-1,3-dicarboxylic acid(H_(8)ETTB)at the SnO_(2)ETL/perovskite ***,the interaction of H_(8)ETTB with the SnO_(2)surface,facilitated by its carboxyl groups,is effective in passivating surface defects caused by noncoord inated Sn and O *** interaction enhances the conductivity of the SnO_(2)film and adjusts energy levels,leading to enhanced charge carrier ***,H_(8)ETTB can passivate noncoord inated Pb^(2+)ions at the perovskite interface,promoting perovskite crystallization and reducing the interface energy barrier,resulting in a perovskite film with low defects and high crystalline *** importantly,the H_(8)ETTB molecule,can convert UV light into light absorbable by the perovskite,thereby reducing damage caused by UV light and improving the device's utilization of ***,the champion PSC based on SnO_(2)-H_(8)ETTB achieves an impressing efficiency of 23.32%and significantly improved photostability compared with the control device after continuous exposure to intense UV *** addition,the Cs_(0.05)(FA_(0.95)MA_(0.05))_(0.95)Pb(I_(0.95)Br_(0.05))_(3)based device can achieve maximum efficiency of 24.01%,demonstrating the effectiveness and universality of this ***,this innovative interface bridging strategy effectively tackles interface defects and low UV light utilization in PSCs,presenting a promising approach for achieving highly efficient and stable PSCs.

关键词： Perovskite solar cells Aggregation-induced emission defect passivation Efficiency UV stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Application of an amphipathic molecule at the NiO_(x)/perovskite interface for improving the efficiency and long-term stability of the inverted perovskite solar cells

引用

Journal of Energy Chemistry 2023年第3期78卷 454-462,I0013页

作者： Guibin Shen Hongye Dong Fan Yang Xin Ren Ng Xin Li Fen Lin Cheng Mu Key Laboratory of Advanced Light Conversion Materials and Biophotonics Department of ChemistryRenmin University of ChinaBeijing 100872China Solar Energy Research Institute of Singapore(SERIS) National University of SingaporeSingapore 117574Singapore State Key Laboratory of Materials Processing and Die&Mold Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina Department of Chemistry National University of Singapore3 Science Drive 3Singapore 117574Singapore

The presence of defects and detrimental reactions at NiO_(x)/perovskite interface extremely limit the efficiency performance and long-term stability of the perovskite solar cells(PSCs) based on NiO_(x).Herein,an amphipathic molecule Triton X100(Triton) is modified on the NiO_(x)*** hydrophilic chain of Triton as a Lewis base additive can coordinate with the Ni3+on the NiO_(x)surface which can passivate the interfacial defects and hinder the detrimental reactions at the NiO_(x)/perovskite ***,the hydrophobic chain of Triton protrudes from the NiO_(x)surface to prevent moisture from penetrating into the NiO_(x)/perovskite ***,the NiO_(x)/Triton-based devices(MAPbI3as absorbing layer) show superior moisture and thermal stability,retaining 88.4% and 64.3% of the initial power conversion efficiency after storage in air(40%-50% relative humidity(RH)) at 25 ℃ for 1070 h and in N2at 85℃ for 800 h,***,the efficiency increases from 17.59% to 19.89% because of the passivation defect and enhanced hole-extraction ***,the NiO_(x)/Triton-based PSCs with Cs_(0.05)(MA_(0.15)FA_(0.85))_(0.95)Pb(I_(0.85)Br_(0.15))3perovskite as the light-absorbing layer also exhibits better moisture and thermal stability compared to the control devices,indicating the viability of our *** particular note,a champion PCE of 22.35% and 20.46% was achieved for small-area(0.1 cm^(2)) and large-area(1.2 cm^(2)) NiO_(x)/Triton-based devices,respectively.

关键词： Perovskite solar cells NiO_(x) defect passivation Long-term stability Amphipathic molecule

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Manipulating Crystal Growth and Secondary Phase PbI_(2)to Enable Efficient and Stable Perovskite Solar Cells with Natural Additives

引用

Nano-Micro Letters 2024年第9期16卷 432-448页

作者： Yirong Wang Yaohui Cheng Chunchun Yin Jinming Zhang Jingxuan You Jizheng Wang Jinfeng Wang Jun Zhang Institute of Chemistry Chinese Academy of Sciences(CAS)Beijing 100190People’s Republic of China University of Chinese Academy of Sciences Beijing 100049People’s Republic of China Nanjing University Nanjing 210023People’s Republic of China Wuhan Textile University Wuhan 430200People’s Republic of China

In perovskite solar cells(PSCs),the inherent defects of perovskite film and the random distribution of excess lead iodide(PbI_(2))prevent the improvement of efficiency and ***,natural cellulose is used as the raw material to design a series of cellulose derivatives for perovskite crystallization *** cationic cellulose derivative C-Im-CN with cyano-imidazolium(Im-CN)cation and chloride anion prominently promotes the crystallization process,grain growth,and directional orientation of ***,excess PbI_(2)is transferred to the surface of perovskite grains or formed plate-like crystallites in local *** effects result in suppressing defect formation,decreasing grain boundaries,enhancing carrier extraction,inhibiting non-radiative recombination,and dramatically prolonging carrier ***,the PSCs exhibit a high power conversion efficiency of 24.71%.Moreover,C-Im-CN has multiple interaction sites and polymer skeleton,so the unencapsulated PSCs maintain above 91.3%of their initial efficiencies after 3000 h of continuous operation in a conventional air atmosphere and have good stability under high humidity *** utilization of biopolymers with excellent structure-designability to manage the perovskite opens a state-of-the-art avenue for manufacturing and improving PSCs.

关键词： Perovskite Solar cells defect passivation Biomass additives Crystal orientation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：