检索结果-南通市图书馆

Sintered Fe-0.8%C-1.0%Si-0.4%Cu P/M Steel Preform Behaviour During cold upsetting

Journal of Iron and Steel Research International 2008年第5期15卷 81-87页

作者： A Rajeshkannan K S Pandey S Shanmugam R Narayanasamy Thiagarajar College of Engineering ThiruparankundramMadurai 625015Tamil NaduIndia Maulana Azad National Institute of Technology Bhopal 462007Madhya PradeshIndia Department of Mechanical Engineering National Institute of TechnologyTiruchirappalli 620015Tamil NaduIndia Department of Production Engineering National Institute of TechnologyTiruchirappalli 620015Tamil NaduIndia

cold upsetting experiments were carried out on sintered Fe 0.8%C1.0%Si-0. 4%Cu steel preforms in order to evaluate their deformation characteristics. Powder preforms of 86 % of theoretical density, with two different ratios of height to diameter, were prepared using a suitable die set assembly on a 1.0 MN capacity hydraulic testing machine. Sintering was carried out in an electric muffle furnace for 1.5 h at 1 150 ℃. Each sintered compact was subjected to incremental loading of 0.04 MN under dry friction condition till a crack appeared at the free surfaces. The experimental results were critically analysed, the stress as a function of strain and densification was obtained, then the work hardening behaviour was analyzed. It has been found that in the process of enhancing densification, strength and strain hardening is also induced during upsetting, but the work hardening behaviour is not homogenously enhanced against strain and densification.

关键词： cold upsetting stress height strain densification work hardening behaviour

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Al–TiO_2–Gr powder metallurgy hybrid composites with cold upset forging

引用

Rare Metals 2014年第6期33卷 686-696页

作者： M.Ravichandran A.Naveen Sait V.Anandakrishnan Department of Mechanical Engineering Chendhuran College of Engineering and Technology Department of Production Engineering National Institute of Technology

The cold upsetting studies were carried out for the aluminium metal matrix hybrid composites in the present study. Aluminium metal matrix hybrid composites were synthesised through powder metallurgy route from ball-milled powders to yield the following compositions：Al ＋ 2.5 wt% TiO2＋ 2 wt% Gr, Al ＋ 2.5 wt% TiO2＋ 4 wt% Gr, Al ＋ 5.0 wt% TiO2＋ 2 wt% Gr and Al ＋ 5.0 wt% TiO2＋ 4 wt% Gr. The compaction process was carried out using suitable punch and die in 40 k N hydraulic press, and sintering was done in an electric muffle furnace at the temperature of 590 °C for 3 h. The sintered preforms were subjected to incremental compressive loading of 10 k N until the cracks were found at the free surface. The true axial stress, true hoop stress, true hydrostatic stress and true effective stress were calculated for all the preforms, and all these stresses are correlated with the true axial strain. The stress ratio parameters（rz/reff, rh/reff, rz/rmand rh/rm） of the all preforms were correlated with true axial strain. The maximum true axial stress, true hoop stress, true effective stress and hydrostatic static stress are obtained for the composite containing5 wt% of TiO2 and 4 wt% of graphite and the minimum ones are obtained for composite containing 2.5 wt% of TiO2 and 2 wt% of graphite.

关键词： Metal matrix composites cold upsetting Powder metallurgy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis and forming behavior of aluminium-based hybrid powder metallurgic composites

引用

International Journal of Minerals,Metallurgy and Materials 2014年第2期21卷 181-189页

Aluminium-based metal matrix composites were synthesized from Al-TiO2-Gr powder mixtures using the powder metallurgy technique and their forming characteristics were studied during cold upsetting. Green cylindrical compacts of pure Al, Al-5wt%TiO2, Al-5wt%TiO2-2wt%Gr, and Al-5wt%TiO2-4wt%Gr were made using a 400-kN hydraulic press equipped with suitable punch and die and by sintering at （590 ± 10）°C for 3 h. cold upset forging tests were carried out, the true axial stress （σz）, the true hoop stress （σ？）, and the true hy-drostatic stress （σm） were evaluated and, their behavior against the true axial strain （εz） was also analyzed. It is observed that the addition of 5wt%TiO2 into the Al matrix increasesσz,σ？, andσm. The addition of both TiO2 and Gr reinforcements reduces the densification and defor-mation characteristics of the sintered preforms during cold upsetting. Microstructure analyses of the as-sintered and cold upset forged speci-mens also were carried out to substantiate the experimental results.

关键词： metal matrix composites cold upsetting powder metallurgy workability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：