检索结果-南通市图书馆

Journal of Rare Earths 2024年第2期42卷 409-414,I0006页

作者： Yanyan Zhao Xu Sun Deliang Meng Xiangsheng Liu Qiang Zhong Zongyu Feng national Engineering research Center for Rare Earth Grirem Advanced Materials Co.Ltd.Beijing0088China Rare Earth Functional Materials(Xiong'an)Innovation Center Co. Ltd.Xiongan071700China General research Institute for Nonferrous Metals Beijing100088China

To find a greener and more economical approach for treating the Mountain Pass rare earth concentrate(MPREC),a novel "Combination Method",including the processes of oxidizing roasting,HCI leaching and sulfuric acid roasting,is proposed in this *** this paper,the effect of phase transition behavior in hydrochloric acid leaching during oxidative roasting at 450-600℃ was *** roasting,the bastnasite in MPREC is decomposed into CeLa_(2)O_(3)F_(3) and(Ce_(0.33),La_(0.33),Ca_(0.33))O_(1.5).As the CeLa_(2)O_(3)F_(3) phase has the fluorine-fixation effect,the generated CeLa_(2)O_(3)F_(3) phase can not be dissolved by HCI after roasting at 500 and 550℃,but it can be decomposed by HCI after roasting at over 600℃,resulting in the improvement of the leaching rate of total F *** maximum leaching efficiency of rare earth elements(REEs) can reach 70.32 wt% at the roasting temperature of 550℃.After roasting at over 600℃,some F^-ions in the solution combined with RE^(3+) to form REF_(3) precipitate and enter the leaching residue,and the others are in the form of [CeF_(3)]^+ in the leaching solution during leaching,therefore,the leaching efficiency of non-ce rium REEs decreases while that of cerium element *** work provides basic research for optimizing the actual production process of MPREC.

关键词： Mountain pass rare earth mine Roasting Phase change Rare earths

Three-dimensionally ordered macroporous(3DOM) structure promoted the activity and H_(2)O poisoning resistance of Ce Mn/3DOM-TiO_(2) catalyst in NH_(3)-SCR

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 523-533,I0004页

作者： Yaqin Hu Shipeng Ding Chenchen Tan Peng Wu Guobo Li Sheng Wang Hongqiang Yang Yaping Zhang key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy and EnvironmentSoutheast UniversityNanjing210096China State Power Environmental Protection research Institute Nanjing210031China

NH_(3)-SCR is an effective mean of NOxremoval in the non-electric industry, however, the high activation temperature and poor H_(2)O resistance of SCR catalysts posed a barrier to its application. In this work, a series of three-dimensionally ordered macroporous(3DOM) catalysts were synthesized via a colloidal crystal template(CCT) method, and various characterizations were carried out to explore the physicochemical property of catalysts. The experiment results reveal that Ce_(0.2)Mn_(0.2)/3DOM-TiO_(2) catalyst presents the excellent low-temperature catalytic activity of nearly 100% at 100℃. Furthermore, the enhanced H_(2)O resistance is achieved, certified by the unaffected NO remove at 150℃ in the participation of 15 vol% H_(2)O. The characterizations results exhibit that the improved dispersion of the active component and enhanced redox ability are conducive to the low-temperature catalytic activity. N_(2) adsorption and desorption experiments indicate that catalyst with 3DOM support possesses a larger pore diameter and specific surface area, which may weaken the condensation of H_(2)O in the microporosity of catalysts and improved the H_(2)O resistance of the catalyst. In situ DRIFTS results manifest that Ce_(0.2)Mn_(0.2)/3DOM-TiO_(2) catalyst could not only absorb more NH_(3) and generate more surface-active sites, but inhibit the competitive adsorption between H_(2)O and SCR reactants.

关键词： 3DOM material NH_(3)-SCR H_(2)O resistance Low-temperature Cerium Rare earths

Effect of grain boundary diffusion of terbium on mode of mechanical fracture of sintered NdFeB magnets

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第4期42卷 696-704页

作者： Zexin Lu Tinghui Wang Jianjun Jiang Bizhang Zheng Lijing Yang Xingqi He Anli Lin Shengzhi Dong Zhenlun Song CAS key Laboratory of Magnetic Materials and Devices Zhejiang Province Key Laboratory of Magnetic Materials and Application TechnologyNingbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo315201China Faculty of Mechanical Engineering and Mechanics Ningbo UniversityNingbo315211China Ningbo Xinqi Precision Magnetism Steel Co. Ltd..Ningbo315156China Center for Advanced Measurement Science National Institute of MetrologyBeijing102200China Division of Functional Materials Central Iron&Steel Research InstituteBeijing100081China

Grain boundary diffusion process(GBDP)is a widely used method of increasing the coercivity of sintered NdFeB *** this study,the effects of the GBDP on the bending strength and microhardness of sintered NdFeB magnets and the fracture mode were *** show that the bending strength of magnets is reduced by pickling and heat treatment and greatly recove rs after heavy rare earth element(Tb)grain boundary *** pickling and the heat treatment cause a slight decrease in *** with the recovery of the bending strength,the hardness decreases after the *** fracture mode of bended magnets changes from intergranular to *** study helps in further improving the mechanical and magnetic properties of sintered NdFeB magnets.

关键词： Sintered NdFeB magnets Grain boundary diffusionprocess Bending strength Heavy rare earth element Coercivity

Effect of surface modification on the radiation stability of diamond ohmic contacts

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第2期33卷 444-448页

作者：牟恋希赵上熳王鹏原晓芦刘金龙朱志甫陈良贤魏俊俊欧阳晓平李成明 Institute for Advanced Materials and Technology University of Science and Technology BeijingBeijing 100083China School of Mechanical Engineering University of Science and Technology BeijingBeijing 100083China School of Information Engineering Zhengzhou University of TechnologyZhengzhou 450044China State key Laboratory of Intense Pulsed Radiation Simulation and Effect Northwest Institute of Nuclear TechnologyXi’an 710024China

The ohmic contact interface between diamond and metal is essential for the application of diamond *** modification can significantly affect the contact performance and eliminate the interface polarization ***,the radiation stability of a diamond detector is also sensitive to surface *** this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was *** radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),*** 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),*** rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,*** electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.

关键词： single crystal diamond ohmic contact surface modification electron radiation

Heterobimetallic lanthanide tetrahedral cages:Synthesis,design and application for potential multimodal imaging contrast agent

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第2期42卷 278-285,I0002页

作者： Yongxiu Li Feng Guo Siwei Wei Duofu Li Jun Zhang Kai Xu Dongping Li Department of Chemistry Nanchang UniversityNanchang330031China key Laboratory of Functional Molecule Design and Interface Process Anhui Jianzhu UniversityHefei230601China Department of Otolaryngology Head and Neck SurgeryThe Second Affiliated Hospital of Nanchang UniversityNanchang330006China

The construction and functionalization of lanthanide-organic cages have been a research hotspot in coordination *** from the unique luminescent and magnetic properties of lanthanide ions,the potential applications of lanthanide-organic cages in biological imaging applications are promising,but only a few corresponding explorations have been *** rein,we introduced a series of lanthanide tetrahedral cages,(Eu_(n)Gd_(4-n)L_(4))(sol)_8(n=0,1,2,3 and 4,where L=(4,4',4"-tris(4,4,4-trifluoro-1,3-dioxobutyl)-triphenylamine,and sol=dimethyl sulfoxide and methanol),with potential applications in biological *** the good luminescent and magnetic properties of Eu^(3+) and Gd^(3+) ions,Eu_(4)L_(4) and Gd_(4)L_(4) complexes show a high luminescence quantum yield of 29% in DMSO and large longitudinal relaxivity(r_(1)) of 11.4(mmol/L)^(-1)/s at 0.5 T in water containing 1 vol% DMSO,*** heterobimetallic Eu-Gd complexes achieve a dual imaging mode by combining luminescent and magnetic centers in one *** the Gd:Eu ratio increases from 1:3 to 3:1,the r_(1) values increases from 5.33 to 8.64(mmoI/L)^(-1)/s,higher than that of commercial contrast agent Gd-DOTA(3.23(mmol/L)^(-1)/s).Owing to their low toxicity and good cell imaging ability toward ECA 109 cells,the selfassembled Eu-Gd heterobimetallic tetrahedral cages could be potential candidates for the multimodal imaging contrast agent.

关键词： Lanthanide organic cage Luminescence Cell imaging Contrast agents Rare earths

Effects of the inlet particle spatial distribution on the performance of a gas-solid cyclone separator

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第2期85卷 133-145页

作者： Yuge Yao Manxia Shang Xiwei Ke Zhong Huang Tuo Zhou Junfu Lyu key Laboratory for Thermal Science and Power Engineering of Ministry of Education Department of Energy and Power EngineeringTsinghua UniversityBeijing100084China

The present study was aimed at the inlet particle spatial distribution of a gas-solid separator with high solid loading and investigated its effects on cyclone performance and the inner flow *** flow fields of a cyclone with different rectangular particle flow areas on the inlet surface were numerically simulated using a four-way coupling *** simulated results indicate that reducing the inlet particle flow area and lowing the inlet particle position can effectively reduce the scattered particles inside the cyclone separator and enhance the separation *** gathering the particles to the centerline can also weaken the particle *** particles near the roof account for the swirling particle ceiling *** inlet particle spatial distribution affects the pressure drop mainly by affecting the gas tangential velocity in the cylinder ***,compared to the hori-zontal particle distribution on the inlet surface,the vertical particle distribution has greater effects on cyclone performance.

关键词： Gas-solid cyclone Inlet particle spatial distribution Four-way coupling Separation efficiency Scattered particle

Experimental investigation of vibration pretreatment-microwave curing process for carbon fiber reinforced resin matrix composites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第6期31卷 1838-1855页

作者： ZHANG De-chao ZHAN Li-hua MA Bo-lin YAO Shun-ming GUO Jin-zhan GUAN Cheng-long LIU Shu Light Alloys research Institute Central South UniversityChangsha 410083China College of Mechanical and Electrical Engineering Central South UniversityChangsha 410083China School of Mechanical Engineering and Automation Fuzhou UniversityFuzhou 350108China

The vibration pretreatment-microwave curing process is an efficient,low energy consumption,and high-quality out-of-autoclave curing process for carbon fiber resin matrix *** study aims to investigate the impact of vibration pretreatment temperature on the fiber weight content,microscopic morphology and mechanical properties of the composite laminates by using optical digital microscopy,universal tensile testing machine and thermo-gravimetric ***,the combined mode of Bragg fiber grating sensor and temperature measurement fiber was employed to explore the effect of vibration pretreatment on the strain process during microwave *** study results revealed that the change in vibration pretreatment temperature had a slight impact on the fiber weight content when the vibration acceleration remained *** metallographic and interlaminar strength of the specimen formed at a vibration pretreatment temperature of 80℃ demonstrated a porosity of 0.414% and a 10.69% decrease in interlaminar shear strength compared to autoclave ***,the introduction of the vibration energy field during the microwave curing process led to a significant reduction in residual strain in both the 0°and 90°fiber directions,when the laminate was cooled to 60℃.

关键词： vibration microwave curing porosity interlaminar shear strength thermo-gravimetric analysis curing strain

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第4期42卷 743-748页

作者： Hao Zhang Yi Bian Yuxuan Xia Yuchen Cui Ziang Li Fang Zhang Yiming Bai Nuofu Chen Jikun Chen School of New Energy North China Electric Power UniversityBeijing102206China School of Materials Science and Engineering University of Science and Technology BeijingBeijing100083China

While the metal to insulator transition(MIT)of d-band correlated perovskite nickelates(RENiO_(3))are widely adjustable via their rare-earth composition,the roles of potential valence variabilities associated with the rare-earth elements were rarely ***,we demonstrate the material synthesis and MIT properties of RENiO_(3) containing valence variable rare-earth compositions,such as Ce,Pr,Sm,Eu and *** metastable perovskite structure of SmNiO_(3) and EuNiO_(3) with a rare-earth valence states variable towards+2 can be effectively synthesized under high oxygen pressures as it is necessary to reduce their formation free *** is in contrast to Ce and Tb,in which situations the variable rare-earth valence state towards+4 reduces their ionic radius and prohibits their occupation or co-occupation of the rare-earth site within the perovskite structured RENiO_(3).Nevertheless,PrNiO_(3) with MIT properties can be effectively synthesized at lower oxygen pressures,owing to the higher stability to form a fully occupied 6s orbit associated Pr3+compared to the half-filled one related to Pr4+.The present work provides guidance for regulating the MIT properties of RENiO_(3).

关键词： Metal to insulator transition Metastable perovskites Rare-earth nickelates Oxides

Effect of annealing temperature on microstructure and mechanical properties of Mg-Zn-Zr-Nd alloy with large final rolling deformation

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第6期31卷 1774-1789页

作者： ZHANG Jin-hai NIE Kai-bo ZHANG Jin-hua DENG Kun-kun LIU Zhi-long College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China State key Laboratory of High-end Compressor and System Technology Hefei 230031China

In this study,the Mg-3Zn-0.5Zr-χNd(χ=0,0.6)alloys were subjected to final rolling treatment with large deformation of 50%.The impact of annealing temperatures on the microstructure and mechanical properties was *** rolled Mg-3Zn-0.5Zr-0.6Nd alloy exhibited an ultimate tensile strength of 386 MPa,a yield strength of 361 MPa,and an elongation of 7.1%.Annealing at different temperatures resulted in reduced strength and obviously increased elongation for both *** mechanical properties for the Mg-3Zn-0.5Zr-0.6Nd alloy were achieved after annealing at 200℃,with an ultimate tensile strength of 287 MPa,a yield strength of 235 MPa,and an elongation of 26.1%.The numerous deformed microstructures,twins,and precipitated phases in the rolled alloy could impede the deformation at room temperature and increase the work hardening *** annealing,a decrease in the work hardening effect and an increase in the dynamic recovery effect were obtained due to the formation of fine equiaxed grains,and the increased volume fraction of precipitated phases,which significantly improved the elongation of the ***,the addition of Nd element could enhance the annealing recrystallization rate,reduce the Schmid factor difference between basal and prismatic slip systems,facilitate multi-system slip initiation and improve the alloy plasticity.

关键词： Mg-Zn-Zr-Nd alloy large final rolling deformation annealing temperatures microstructures mechanical properties

Ultrahigh strength and improved electrical conductivity in an aging strengthened copper alloy processed by combination of equal channel angular pressing and thermomechanical treatment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第6期31卷 1823-1837页

作者： WANG Xu LI Zhou MENG Xiang-peng XIAO Zhu School of Materials Science and Engineering Central South UniversityChangsha 410083China Ningbo Boway Alloy Material Co. Ltd.Ningbo 315135China key Laboratory of Non-ferrous Metal Materials Science and Engineering(Ministry of Education) Changsha 410083China

In this paper,equal channel angular pressing and thermomechanical treatment was employed to improve the strength and electrical conductivity of an aging strengthened Cu-Ti-Cr-Mg alloy,and the microstructure and properties of the alloy were investigated in *** results showed that the samples deformed by the combination of cryogenic equal channel angular pressing(ECAP)and rolling had good comprehensive properties after aging at 400℃.The tensile strength of the peak-aged and over-aged samples was 1120 MPa and 940 MPa,with their corresponding electrical conductivity of 14.7%IACS and 22.1%IACS,*** and cryogenic rolling introduced high density dislocations,leading to the inhibition of the softening effects and refinement of the *** a long time aging at 400℃,the alloy exhibited ultra-high strength with obvious increasing electrical *** high strength was attributed to the synergistic effect of work hardening,grain refinement strengthening and precipitation *** precipitation of a large amount of Ti atoms from the matrix led to the high electrical conductivity of the over-aged sample.

关键词： Cu-Ti alloy equal channel angular pressing rolling aging treatment high strength