检索结果-南通市图书馆

A Wind Tunnel Experimental Study on the Wake Characteristics of a Horizontal Axis Wind Turbine

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal science 2025年第1期34卷 145-158页

作者： GUO Xingduo LI Yinran LI Rennian MA Yulong WEI Kui College of Energy and Power Engineering Lanzhou University of Technology Key Laboratory of Fluid Machinery and Systems Gansu Provincial technology Centre for Wind Turbines

The characteristics of wind turbine wakes are influenced by multiple factors,including the atmospheric boundary layer(ABL) wind and wind turbine operating conditions(e.g.,tip speed ratio and yaw angle).In this study,two types of ABL winds with different velocity gradients and turbulence intensities are generated in a wind tunnel through configurations of spires,baffles,and various numbers of roughness elements.A wind turbine with a rotor diameter of 0.8 m and a hub height of 0.6 m is tested under varying tip speed ratios,yaw angles,and ABL wind *** results indicate that the streamwise velocity deficit in the near-wake region becomes more pronounced with an increase in the tip speed ratio,while the far-wake velocity deficit remains largely unaffected by changes in the tip speed *** the yaw angle increases,the wake deflection becomes more prominent and the wake narrows;the offset of the wake center at various downstream positions grows linearly,reaching a maximum value of approximately half the rotor ***,the turbulence level and influence range in the wake region are reduced when the turbine is *** ABL wind conditions,high turbulence intensity in the incoming flow accelerates wake recovery,and the Reynolds stress at different lateral positions tends to become consistent with increasing longitudinal ***,turbulence has a significant impact on the meandering characteristics of the wind turbine wake,with greater fluctuations in the wake center observed under higher turbulence ***,this study provides insights that could inform the optimal operation of wind farms.

关键词： horizontal axis wind turbine turbulence wind tunnel experiment wind turbine wake

Experimental Study on Geometry Characteristics of Turbulent Premixed Flames for Natural Gas/Air Mixtures

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal science 2025年第1期34卷 268-282页

作者： ZHENG Weilin WANG Qijiao XIAO Huahua CHEN Xiaoxiao XIE Fan ZENG Wen Liaoning Key Lab of Advanced Test technology for Aerospace Propulsion System Shenyang Aerospace University State Key Laboratory of Fire science University of science and Technology of China AVIC Shenyang Aircraft Design and Research Institute

In this study,focusing on the geometry characteristics of spherical expanding flame,the turbulent premixed flames of natural gas/air mixtures were investigated in a fan-stirred turbulent *** effects of initial temperature（T=300-400 K）,initial pressure（P=0.1-0.3 MPa）,turbulence intensity（u'=1.0-2.7 m/s）,oxygen volumetric percentage(φ（O2）=15%-21%) and carbon dioxide volumetric percentage(φ（CO2）=0-20%)were delved *** flame profile under the Cartesian coordinate system was derived from the schlieren images taken by the high-speed ***,from both macroscopic and microscopic perspectives,the influence of experimental conditions on the flame geometry characteristics was explored through flame front extraction,wavelet decomposition and network *** results demonstrate that for significant flame wrinkling,changes in species concentrations and turbulence intensity have more pronounced effects on the flame wrinkling *** wrinkling of the flame front maintains a certain degree of similarity,as evidenced by the locally concentrated distribution of the angles of the maximum fluctuation *** disturbance energy under large-scale（D6-D8） disturbances exhibits relatively high values with a similar trend,exerting a significant impact on the geometry characteristics of the flame *** peaks of correlation degree are scattered either with the decomposition scale or the development of flame radius,indicating no linear correlation between different detail ***,the probability distribution of node degrees in key wrinkled regions exhibits different trends with that of large-scale wrinkling and disturbance energy,especially with changes in initial *** occurs because the number of key wrinkles varies based on the perturbation's strength or the region's ***,an increase in the fluctuation frequency of the flame's local radius may not necessarily lead to an increase in the number of key folded regions.

关键词： fan-stirred turbulent combustor geometry characteristics large-scale wrinkling network topology wavelet decomposition

Recent development in electrode design for wide-temperature supercapacitors

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

science China Chemistry 2025年第1期68卷 96-117页

作者： Jianhong Liu Qiang Zhou Yuxiao Lin Xinsheng Zhao Guangmin Zhou Xiaoxiao Li School of Physics and Electronic Engineering Jiangsu Normal University Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School Tsinghua University

An ever-increasing market demand has stimulated the soaring enthusiasm of researchers to develop wide-temperature supercapacitors(SCs). The active electrode is one of the most important parts of SC, which is directly related to the energy density,power transmission and long-term cyclability of the device in the wide-temperature environment. Compared with the SC electrodes aimed for room-temperature application, the SC electrodes for operating at wide-temperature scene often face greater challenges. In this review, the main challenges of SC electrodes under various temperature conditions, including low, high and cross-fade temperatures, are summarized. The relevant performance decay and failure mechanisms of wide-temperature SC electrodes are analyzed. In addition, this review deals with the recent studies and developments in robust wide-temperature SC electrodes with respect to the rational design of electrode structures and the exploitation of advanced active materials. Finally, the future directions for exploring reliable wide-temperature SCs are also proposed.

关键词： supercapacitor wide-temperature electrode design active materials

Design of a cationic accelerator enabling ultrafast ion diffusion kinetics in aqueous zinc-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 377-384页

作者： Yawei Xiao Qianqian Gu Haoyu Li Mengyao Li Yude Wang national Center for International Research on Photoelectric and Energy Materials School of Materials and Energy Yunnan University Key Laboratory of Ministry of Education for Advanced Materials in Tropical Island Resources School of Chemistry and Chemical Engineering Hainan University College of Chemical Engineering Fuzhou University Yunnan Key Laboratory of Carbon Neutrality and Green Low-carbon Technologies Yunnan University

Aqueous zinc-ion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion *** address this,a strategy has been developed to create a cation-accelerating electric field on the surface of the cathode to achieve ultrafast Zn2+diffusion *** employing electrodeposition to coat MoS2on the surface of BaV6O16·3H2O nanowires,the directional built-in electric field generated at the heterointerface acts as a cation accelerator,continuously accelerating Zn2+diffusion into the active *** optimized Zn2+diffusion coefficient in CC@BaV-6O16·3H2O@MoS2(7.5×10～8cm2s-1) surpasses that of most reported V-based ***,MoS2serving as a cathodic armor extends the cycling life of the Zn-CC@BaV6O16·3H2O@MoS2full batteries to over 10000 *** work provides valuable insights into optimizing ion diffusion kinetics for high-performance energy storage devices.

关键词： Zinc alloys

Photo‑Energized MoS_(2)/CNT Cathode for High‑Performance Li–CO_(2)Batteries in a Wide‑Temperature Range

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 160-175页

作者： Tingsong Hu Wenyi Lian Kang Hu Qiuju Li Xueliang Cui Tengyu Yao Laifa Shen Jiangsu Key Laboratory of Materials and Technologies for Energy Storage College of Materials Science and TechnologyNanjing University of Aeronautics and AstronauticsNanjing 210016People’s Republic of China

Li–CO_(2) batteries are considered promising energy storage systems in extreme environments such as Mars;however,severe performance degradation will occur at a subzero temperature owning to the sluggish reaction ***,a photo-energized strategy adopting sustainable solar energy in wide working temperature range Li–CO_(2) battery was achieved with a binder-free MoS_(2)/carbon nanotube(CNT)photo-electrode as *** unique layered structure and excellent photoelectric properties of MoS_(2) facilitate the abundant generation and rapid transfer of photo-excited carriers,which accelerate the CO_(2) reduction and Li_(2)CO_(3) decomposition upon *** illuminated battery at room temperature exhibited high discharge voltage of 2.95 V and mitigated charge voltage of 3.27 V,attaining superior energy efficiency of 90.2%and excellent cycling stability of over 120 *** at an extremely low temperature of−30℃,the battery with same electrolyte can still deliver a small polarization of 0.45 V by the photoelectric and photothermal synergistic mechanism of MoS_(2)/CNT *** work demonstrates the promising potential of the photo-energized wide working temperature range Li–CO_(2) battery in addressing the obstacle of charge overpotential and energy efficiency.

关键词： Li-CO_(2)batteries Photo-energized Wide operation-temperature Kinetics MoS_(2)

Innovative dual-mode device integrating capacitive desalination and solar vapor generation for high-efficiency seawater desalination

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 171-179页

作者： Jiacheng Wang Zhaoyu Chen Ruduan Yuan Jiaxin Luo Ben Zhang Keju Ji Meng Li Juanxiu Xiao Kuan Sun national Innovation Center for Industry-Education Integration of Energy Storage technology MOE Key Laboratory of Low-grade Energy Utilization Technologies and SystemsCollege of Energy & Power Engineering Chongqing University Xuefeng Mountain Energy Equipment Safety national Observation and Research Station CQU-NUS Renewable Energy Materials & Devices Joint Laboratory Chongqing University Southwest technology and Engineering Research Institute Jiangsu Provincial Key Laboratory of Bionic Functional Materials College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and Astronautics State Key Laboratory of Marine Resources Utilization in South China Sea Collaborative Innovation Center of Marine Science and Technology School of Marine Science and Engineering Hainan University

Solar-driven interface evaporation with high solar-to-steam conversion efficiency has shown great potential in seawater ***,due to the influence of latent heat and condensation efficiency,the water yield from solar-driven interface evaporation remains insufficient,posing a significant challenge that requires *** this work,we designed a dual-mode high-flux seawater desalination device that combines solar-driven interface evaporation and capacitive *** utilizing coupled desalination materials exhibiting both photothermal conversion and capacitance activity,the device demonstrated photothermal evaporation rates of 1.41 and 0.97 kg m-2h-1for condensate water yield under one-sun ***,the device exhibited a salt adsorption capacity of up to48 mg g-1and a salt adsorption rate of 2.1 mg *** addition,the salt adsorption capacity increased by approximately 32% under one-sun ***,photo-enhanced capacitive desalination performance was explored through numerical simulations and theoretical *** calculations and characterizations confirmed that the defect energy levels formed by the introduction of sulfur vacancies can effectively widen the light absorption range,improve photothermal conversion performance,and stimulate more photoelectrons to participate in capacitive ***,the electron distribution state of molybdenum disulfide with sulfur vacancies and surface defect sites contributes to ion/electron transport at the solid-liquid *** work provides a novel pathway for integrating solar vapor generation with other low-energy desalination technologies.

关键词： Desalination

Recent progress in constructing fluorinated solid-electrolyte interphases for stable lithium metal anodes

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 270-291页

作者： Di Zhang Pengfei Lv Wei Qin Xin He Yuanhua He Civil Aircraft Fire science and Safety Engineering Key Laboratory of Sichuan Province College of Civil Aviation Safety EngineeringCivil Aviation Flight University of ChinaGuanghan 618307China School of Chemical Engineering Sichuan UniversityChengdu 610065China

Lithium metal batteries(LMBs)are emerging as a promising energy storage solution owing to their high energy density and specific ***,the non-uniform plating of lithium and the potential rupture of the solid-electrolyte interphase(SEI)during extended cycling use may result in dendrite growth,which can penetrate the separator and pose significant short-circuit *** a stable SEI is essential for the long-term operation of the ***-rich SEI has garnered significant attention for its ability to effectively passivate electrodes,regulate lithium deposition,and inhibit electrolyte *** the structural components and preparation methods of existing fluorinated SEI is crucial for optimizing lithium metal anode *** paper reviews the research on optimizing LiF passivation interfaces to protect lithium metal *** focuses on four types of compositions in fluorinated SEI that work synergistically to enhance SEI *** instance,combining compounds with LiF can further enhance the mechanical strength and ionic conductivity of the *** metals with LiF significantly improves electrochemical performance at the SEI/anode interface,with a necessary focus on reducing electron tunneling ***,incorporating polymers with LiF offers balanced improvements in interfacial toughness and ionic conductivity,though maintaining structural stability over long cycles remains a critical area for future *** alloys combined with LiF increase surface energy and lithium affinity,challenges such as dendrite growth and volume expansion *** summary,this paper emphasizes the crucial role of interfacial structures in LMBs and offers comprehensive guidance for future design and development efforts in battery technology.

关键词： LiF lithium metal anodes solid-electrolyte interphase interface cycling stability

Ideal Bi‑Based Hybrid Anode Material for Ultrafast Charging of Sodium‑Ion Batteries at Extremely Low Temperatures

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 152-167页

作者： Jie Bai Jian Hui Jia Yu Wang Chun Cheng Yang Qing Jiang Key Laboratory of Automobile Materials(Jilin University) Ministry of EducationSchool of Materials Science and EngineeringJilin UniversityChangchun 130022People’s Republic of China

Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or ***,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely ***,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock *** a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1)at 2 A g^(−1))at−60℃,outperforming all reported SIB anode *** with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1)at−40°*** on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.

关键词： Bi nanoparticles High temperature shock High-rate activation Ultrafast charging Low-temperature sodium-ion batteries

Assessing the corrosion protection property of coatings loaded with corrosion inhibitors using the real-time atmospheric corrosion monitoring technique

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 119-126页

作者： Xiaoxue Wang Lulu Jin Jinke Wang Rongqiao Wang Xiuchun Liu Kai Gao Jingli Sun Yong Yuan Lingwei Ma Hongchang Qian Dawei Zhang School of Energy and Power Engineering Beihang UniversityBeijing 100191China Beijing Institute of Space Long March Vehicle Beijing 100076China national Materials Corrosion and Protection Data Center University of Science and Technology BeijingBeijing 100083China Institute of Materials Intelligent technology Liaoning Academy of MaterialsShenyang 110004China Shanghai Spaceflight Precision Machinery Institute Shanghai 201600China

The atmospheric corrosion monitoring(ACM)technique has been widely employed to track the real-time corrosion behavior of metal ***,limited studies have applied ACM to the corrosion protection properties of organic *** study compared a bare epoxy coating with one containing zinc phosphate corrosion inhibitors,both applied on ACM sensors,to observe their corrosion protection properties over *** with artificial damage via scratches were exposed to immersion and alternating dry and wet environments,which allowed for monitoring galvanic corrosion currents in *** the corrosion tests,the ACM currents of the zinc phosphate/epoxy coating were considerably lower than those of the blank epoxy *** trend in ACM current variations closely matched the results obtained from regular electrochemical tests and surface *** alignment highlights the potential of the ACM technique in evaluating the corrosion protection capabilities of organic *** with the blank epoxy coating,the zinc phosphate/epoxy coating showed much-decreased ACM current values that confirmed the effective inhibition of zinc phosphate against steel corrosion beneath the damaged coating.

关键词： atmospheric corrosion monitoring technology corrosion inhibitor coating carbon steel corrosion protection