检索结果-南通市图书馆

Staring-imaging satellite pointing estimation based on sequential ISAR images

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第8期37卷 261-276页

作者： Canyu WANG Libing JIANG Weijun ZHONG Xiaoyuan REN Zhuang WANG national Key Laboratory of Automatic Target Recognition National University of Defense TechnologyChangsha 410073China Xi’an Satellite Control Center Xi’an 710600China

Pointing estimation for spacecraft using Inverse Synthetic Aperture Radar(ISAR)images plays a significant role in space situational awareness and ***,feature extraction and cross-range scaling of ISAR images create bottlenecks that limit performances of current estimation ***,the emergence of staring imaging satellites,characterized by complex kinematic behaviors,presents a novel challenge to this *** address these issues,this article proposes a pointing estimation method based on Convolutional Neural Networks(CNNs)and a numerical optimization algorithm.A satellite’s main axis,which is extracted from ISAR images by a proposed Semantic Axis Region Regression Net(SARRN),is chosen for investigation in this article due to its unique ***,considering the kinematic characteristic of the staring satellite,an ISAR imaging model is established to bridge the target pointing and the extracted *** on the imaging model,pointing estimation and cross-range scaling can be described as a maximum likelihood estimation problem,and an iterative optimization algorithm modified by using the strategy of random sampling-consistency check and weighted least squares is proposed to solve this ***,the pointing of targets and the cross-range scaling factors of ISAR images are *** experiments based on actual satellite orbital parameters verify the effectiveness of the proposed *** work can improve the performance of satellite reconnaissance warning,while accurate cross-range scaling can provide a basis for subsequent data processes such as 3D reconstruction and attitude estimation.

关键词： Staring-imaging Agile satellite Inverse Synthetic Aperture Radar(ISAR) Pointing estimation Cross-range scaling

New sustainable polymers with on-demand depolymerization property

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第9期67卷 2803-2841页

作者： Yangyang Sun Zesheng An Yanshan Gao Rongrong Hu Ye Liu Hua Lu Xiao-Bing Lu Xuan Pang Anjun Qin Yong Shen Youhua Tao Yu-Zhong Wang Junpeng Wang Gang Wu Guang-Peng Wu Tie-Qi Xu Xing-Hong Zhang Yuetao Zhang Zhenbiao Zhang Jian-Bo Zhu Miao Hong Zhibo Li State Key Laboratory of Organometallic Chemistry Shanghai Institute of Organic ChemistryChinese Academy of SciencesShanghai 200032China State Key Laboratory Base of Eco-Chemical Engineering College of Chemical EngineeringQingdao University of Science and TechnologyQingdao266042China State Key Laboratory of Supramolecular Structure and Materials College of ChemistryJilin UniversityChangchun 130012China State Key Laboratory of Luminescent Materials and Devices Guangdong Provincial Key Laboratory of Luminescence from Molecular AggregatesSouth China University of TechnologyGuangzhou 510640China State Key Laboratory of Fine Chemicals Frontiers Science Center for Smart MaterialsDalian University of TechnologyDalian 116024China Beijing national Laboratory for Molecular Sciences Center for Soft Matter Science and EngineeringKey Laboratory of Polymer Chemistry and Physics of Ministry of EducationCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China Key Laboratory of Polymer Ecomaterials Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022China The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials(MoE) National Engineering Laboratory of Eco-Friendly Polymeric Materials(Sichuan)College of ChemistryState Key Laboratory of Polymer Materials EngineeringSichuan UniversityChengdu 610064China School of Polymer Science and Polymer Engineering the University of AkronAkronOH 44325USA MOE Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and EngineeringZhejiang UniversityHangzhou 310027China State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials Jiangsu Key Laboratory of Advanced Functional Polymer Design and ApplicationSuzhou Key Laboratory of Macromolecular Design and Precision SynthesisCollege of ChemistryChemical Engineering and Materials ScienceSoochow UniversitySuzhou 215123China

To combat the crisis of today's synthetic polymers arising from unsustainable production and disposal,it is essential for the synthetic polymer community to reshape the current polymer industry with sustainable *** an emerging class of sustainable polymers,the development of chemically depolymerizable polymers(CDPs),which can undergo closed-loop depolymerization/repolymerization cycles to reproduce virgin polymers without the loss of properties from recovered monomers,offers an ideal solution to preserve finite natural resources,provides a feasible solution to the end-of-life issue of polymer waste,and thereby establishes a circular materials ***,two grand key challenges have been encountered in the establishment of practically useful CDPs:how to balance polymerization and depolymerization ability and how to unify conflicted depolymerizability and physical ***,this critical review article presents our vision for summarizing feasible strategies to overcome the above two significant challenges and the design principles for constructing an ideal CDP by highlighting selected major progress made in this rapidly expanding field.

关键词： chemically depolymerizable polymers sustainable polymers depolymerization monomer recovery degradation plastics

Antibacterial properties of cerium oxide nanoparticles:Recent progresses and future challenges

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第10期93卷 264-283页

作者： Heishu Zheng Jiajing Tang Yanhua Wei Xi Deng Yingjuan Zhang Xiangyu Ma Xudong Jiang Zhi Ping Xu Hongbing Liao College&Hospital of Stomatology Guangxi Medical UniversityNanning530021China Guangxi Key Laboratory of Oral and Maxillofacial Rehabilitation and Reconstruction Guangxi Medical UniversityNanning530021China The First Affiliated Hospital of Guangxi Medical University Nanning530021China School of Medicine Guangxi University of Science and TechnologyLiuzhou545005China Institute of Biomedical Health Technology and Engineering and Institute of Systems and Physical Biology Shenzhen Bay LaboratoryShenzhen518107China Australian Institute for Bioengineering and Nanotechnology(Bld 75) The University of QueenslandSt LuciaQueensland 4074Australia

Use of cerium oxide nanoparticles(CeO_(2) NPs)to optimize management of resistant microorganisms has received increasing attention due to non-specific activity of inorganic antibacterial *** the mechanism of action is essential to elucidating the antibacterial activity of CeO_(2) NPs against ***,this review aims to summarize the antibacterial mechanisms of CeO_(2) NPs and correlate the structural and physicochemical properties of CeO_(2) NPs to their antibacterial *** further summarize the strategies for the improvement of the antibacterial performance of CeO_(2) NPs and provide our opinions for future challenges as a conclusion.

关键词： Nanoparticles Cerium oxide Antibacterial activity Nanozyme Fenton reaction

Defect engineering on constructing surface active sites in catalysts for environment and energy applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第7期18卷 11-32页

作者： Yawen Cai Baowei Hu Xiangke Wang School of Life Science Shaoxing UniversityShaoxing 312000China College of Environmental Science and Engineering North China Electric Power UniversityBeijing 102206China

The precise engineering of surface active sites is deemed as an efficient protocol for regulating surfaces and catalytic properties of *** engineering is the most feasible option to modulate the surface active sites of *** specific active sites on the catalyst allows precise modulation of its electronic structure and physicochemical ***,we outlined the engineering of several types of defects,including vacancy defects,void defects,dopant-related defects,and defect-based single atomic *** overview of progress in fabricating structural defects on catalysts via de novo synthesis or post-synthetic modification was ***,the applications of the well-designed defective catalysts in energy conversion and environmental remediation were carefully ***,current challenges in the precise construction of active defect sites on the catalyst and future perspectives for the development directions of precisely controlled synthesis of defective catalysts were also proposed.

关键词： defect engineering vacancy void defects doping single atomic sites

Reactive transport modeling constraints on the complex genesis of a lacustrine dolomite reservoir: A case from the Eocene Qaidam Basin,China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2240-2256页

作者： Ying Xiong Bo Liu Xiu-Cheng Tan Zheng-Meng Hou Jia-Shun Luo Ya-Chen Xie Kai-Bo Shi Kun-Yu Wu School of Earth and Space Sciences Peking University Institute of Oil and Gas Peking University China national Petroleum Corporation Key Laboratory of Carbonate Reservoirs Southwest Petroleum University Institute of Subsurface Energy Systems Clausthal University of Technology Research Institute of Exploration and Development PetroChina Qinghai Oil Field Company

Reactive transport modeling(RTM) is an emerging method used to address geological issues in diagenesis research. However, the extrapolation of RTM results to practical reservoir prediction is not sufficiently understood. This paper presents a case study of the Eocene Qaidam Basin that combines RTM results with petrological and mineralogical evidence. The results show that the Eocene Xiaganchaigou Formation is characterized by mixed siliciclastic-carbonate-evaporite sedimentation in a semiclosed saline lacustrine environment. Periodic evaporation and salinization processes during the syngeneticpenecontemporaneous stage gave rise to the replacive genesis of dolomites and the cyclic enrichment of dolomite in the middle-upper parts of the meter-scale depositional sequences. The successive change in mineral paragenesis from terrigenous clastics to carbonates to evaporites was reconstructed using RTM simulations. Parametric uncertainty analyses further suggest that the evaporation intensity(brine salinity) and particle size of sediments(reactive surface area) were important rate-determining factors in the dolomitization, as shown by the relatively higher reaction rates under conditions of higher brine salinity and fine-grained sediments. Combining the simulation results with measured mineralogical and reservoir physical property data indicates that the preservation of original intergranular pores and the generation of porosity via replacive dolomitization were the major formation mechanisms of the distinctive lacustrine dolomite reservoirs(widespread submicron intercrystalline micropores) in the Eocene Qaidam Basin. The results confirm that RTM can be effectively used in geological studies, can provide a better general understanding of the dolomitizing fluid-rock interactions, and can shed light on the spatiotemporal evolution of mineralogy and porosity during dolomitization and the formation of lacustrine dolomite reservoirs.

关键词： Reactive transport modeling Lacustrine dolomite Mineralogy and porosity evolution Reservoir genesis

Effect of local openings on bearing behavior and failure mechanism of shield tunnel segments

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Underground Space 2024年第3期16卷 183-205页

作者： Xiaojing Gao Pengfei Li Mingju Zhang Haifeng Wang Ziqi Jia Wu Feng Key Laboratory of Urban Security and Disaster Engineering Ministry of EducationBeijing University of TechnologyBeijing 100124China Nantong Railway Construction Component Co. LtdNantong 226000China

Local failures(loss of concrete or reinforcement)can severely compromise the bearing capacity of shield segments,damaging the tunnel *** investigate the effects of local openings on the bearing behavior and failure mechanism,four full-scale bending tests were conducted on specimens with different opening positions and diameters;monitoring of load,displacement,and concrete strain was performed during *** test results reveal that both the opening position and diameter significantly influence the bearing characteristics of the *** failure process includes four sequential stages distinguished by three critical loads,namely the cracking,failure,and ultimate ***,the numerical model of the local failure segment was established using the elastoplastic damage constitutive relation of the concrete and verified by inversing the full-scale test *** on the numerical model,parametric analyses were performed to comprehensively investigate the influences of the opening position,concrete loss,and reinforcement loss on the bending ***,an analytical model was proposed,indicating that the opening position is the primary factor decreasing the bearing capacity,followed by the opening diameter and reinforcement *** results of this study can provide a theoretical basis for the safety assessment and remedial design of subway shield tunnels under extreme breakthrough conditions.

关键词： Shield tunnel Local opening segment Bearing behavior Failure mechanism

An Innovation of Evaluation and Design of Vehicle Acceleration Sound Based on EEG Signals

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第1期21卷 344-361页

作者： Liping Xie XinYou Lin Wan Chen Zhien Liu Yawei Zhu College of Mechanical Engineering&Automation Fuzhou UniversityFuzhou 350108China Hubei Collaborative Innovation Center for Automotive Components Technology Wuhan University of TechnologyWuhan 430070China

There is a bottleneck in the design of vehicle sound that the subjective perception of sound quality that combines multiple psychological factors fails to be accurately and objectively ***,EEG signals are introduced in this paper to investigate the evaluation and design method of vehicle acceleration sound with powerful sound ***,the experiment of EEG acquisition and subjective evaluation under the stimulation of powerful vehicle sounds is conducted,respectively,then three physiological EEG features of PSD_β,PSD_γand DE are constructed to evaluate the vehicle sounds based on the correlation analysis ***,the Adaptive Genetic Algorithm(AGA)is proposed to optimize the Elman model,where an intelligent model(AGA–Elman)is constructed to objectively predicate the perception of subjects for the vehicle sounds with powerful sound *** results demonstrate that the error of the constructed AGA–Elman model is only 2.88%,which outperforms than the traditional BP and Elman model;Finally,two vehicle acceleration sounds(Design1 and Design2)are designed based on the constructed AGA–Elman model from the perspective of order modulation and frequency modulation,which provide the acoustic theoretical guidance for the design of vehicle sound incorporating the EEG signals.

关键词： EEG signal Brain activity analysis Vehicle sound design Adaptive genetic algorithm-Elman model

Large low-field reversible magnetocaloric effect in K_(3)Gd(PO_(4))_(2) at sub-Kelvin temperature

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1087-1092,I0003页

作者： Haojie Wang Zhaojun Mo Jianjian Gong Heng Tu Guochun Zhang Jun Shen School of Rare Earths University of Science and Technology of ChinaHefei230026China Ganjiang Innovation Academy Chinese Academy of SciencesGanzhou341119China Center for Crystal Research and Development Key Laboratory of Functional Crystals and Laser TechnologyKey Laboratory of CryogenicsTechnical Institute of Physics and ChemistryChinese Academy of SciencesBeijing100190China Department of Energy and PowerEngineering School of Mechanical EngineeringBeijing Institute of TechnologyBeijing100081China

We synthesized a potassium gadolinium phosphate K3Gd(PO_(4))_(2)with monoclinic structure(P2_(1/m))by the high-temperature solid-state reaction *** lattice constants obtained by Rietveld refinements of XRD curve are a=0.7411 nm,b=0.5624 nm,and c=0.9433 *** and magnetocaloric properties of K_(3)Gd(PO_(4))_(2)were investigated in *** magnetic phase transition temperature of K3Gd(PO_(4))2 was determined by ultra-low temperature testing to be 0.58 K.K_(3)Gd(PO_(4))2 exhibits large magnetic entropy changes(-ΔSM).The maximum-ΔSM are 20.2 and 29.4 J/(kg·K)in the magnetic field variation(ΔH)of 1 and 2 T,respectively,which are larger than that of the commercial Gd_(3)Ga_(5)O_(12)(GGG).The maximum adiabatic temperature change(ΔT_(ad))reaches 5.91 K under a magnetic field change(ΔH)of 1 T.K_(3)Gd(PO_(4))_(2)is a potential magnetic refrigeration material for obtaining sub-Kelvin temperatures.

关键词： Ultra-low temperature Magnetocaloric effect Magnetic entropy change Magnetic refrigeration Rare earths

Preparation of Fe-As alloys by mechanical alloying and vacuum hot-pressed sintering:microstructure evolution,mechanical properties,and mechanisms

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3876-3892页

作者： Fei Chai Fei-Ping Zhao Zhan Hu Shi-Yi Wen Ben-Hammouda Samia Ze-Lin Fu Xin-Ting Lai Yan-Jie Liang Xiao-Bo Min Li-Yuan Chai School of Metallurgy and Environment Central South UniversityChangsha 410083China Chinese national Engineering Research Center for Control&Treatment of Heavy Metal Pollution Institute of Environmental EngineeringCentral South UniversityChangsha 410083HunanChin State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Department of Building Civiland Environmental EngineeringConcordia UniversityMontreal H3G 1M8Canada

Arsenic materials have attracted great attention due to their unique ***,research concerning iron-arsenic(Fe-As) alloys is very scarce due to the volatility of As at low temperature and the high melting point of ***,a new Fe-As alloy was obtained by mechanical alloying(MA) followed by vacuum hot-pressed sintering(VHPS).Moreover,a systematic study was carried out on the microstructural evolution,phase composition,leaching toxicity of As,and physical and mechanical properties of Fe-As alloys with varying weight fractions of As(20%,25%,30%,35%,45%,55%,65%,and 75%).The results showed that pre-alloyed metallic powders(PAMPs) have a fine grain size and specific supersaturated solid solution after MA,which could effectively improve the mechanical properties of Fe-As alloys by VHPS.A high density(> 7.350 g·cm^(-3)),low toxicity,and excellent mechanical properties could be obtained for FeAs alloys sintered via VHPS by adding an appropriate amount of As,which is more valuable than commercial Fe-As *** Fe-25% As alloy with low toxicity and a relatively high density(7.635 g·cm^(-3)) provides an ultra-high compressive strength(1989.19 MPa),while the Fe-65% As alloy owns the maximum Vickers hardness(HVo.5 899.41).After leaching by the toxicity characteristic leaching procedure(TCLP),these alloys could still maintain good mechanical performance,and the strengthening mechanisms of Fe-As alloys before and after leaching were *** in the grain size,micro structure,and phase distribution induced significant differences in the compressive strength and hardness.

关键词： Mechanical alloying Vacuum hot-pressed sintering High-pressure Arsenic-iron alloys Mechanical properties