检索结果-南通市图书馆

Chinese Journal of Mechanical Engineering 2024年第1期37卷 203-214页

作者： Xiaokang Huang Xiaoyong Tian Qi Zhong Shunwen He Cunbao Huo Yi Cao Zhiqiang Tong Dichen Li State Key Laboratory of Manufacturing Systems Engineering Xi’an Jiaotong UniversityXian 710049China

Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion(PBF)*** this study,a dynamic monitoring and feedback system of powder bed temperature field using an infrared thermal imager has been established and integrated into a four-laser PBF equipment with a working area of 2000 mm×2000 *** heat-affected zone(HAZ)temperature field has been controlled by adjusting the scanning speed ***,the relationship among spot size,HAZ temperature,and part performance has been *** fluctuation of the HAZ temperature in four-laser scanning areas was decreased from 30.85℃to 17.41℃.Thus,the consistency of the sintering performance of the produced large component has been *** on the controllable temperature field,a dynamically adjusting strategy for laser spot size was proposed,by which the fabrication efficiency was improved up to 65.38%.The current research results were of great significance to the further industrial applications of large-scale PBF equipment.

关键词： Powder bed fusion Efficiency Large-scale Spot size Heat-affected zone(HAZ)

An in-situ polymerized interphase engineering for high-voltage allsolid- state lithium-metal batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第4期17卷 2687-2692页

作者： Lu Nie Shaojie Chen Mengtian Zhang Tianyi Gao Yuyao Zhang Ran Wei Yining Zhang Wei Liu School of Physical Science and technology ShanghaiTech UniversityShanghai 201210China Tsinghua-Berkeley Shenzhen Institute&Tsinghua Shenzhen International Graduate School Tsinghua UniversityShenzhen 518055China

All-solid-state lithium batteries(ASSLBs)have attracted great interest due to their promising energy density and strong ***,the interface issues,including large interfacial resistance between electrode and electrolyte and low electrochemical stability of solid-state electrolytes against high-voltage cathodes,have restricted the development of high-voltage ***,we report an ASSLB with stable cycling by adopting a conformal polymer interlayer in-situ formed at the Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)–cathode *** polymer can perfectlyﬁll the voids and create a stable interface contact between LLZTO and *** addition,the electric field across the polymer interlayer is reduced compared with pure solid polymer electrolyte(SPE),which facilitates the electrochemical stability with high-voltage *** all-solid-state Li|LLZTO-SPE|LiFe_(0.4)Mn_(0.6)PO_(4)(LMFP)cells achieve a low interface impedance,high specific capacity,and excellent cycling *** work presents an effective and practical strategy to rationally design the electrode–electrolyte interface for the application of high-voltage ASSLBs.

关键词： all-solid-state lithium batteries interface contact electric field electrochemical stability

Electronic structures and Mott state of epitaxial TaS_(2) monolayers

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science china(Physics,Mechanics & Astronomy) 2024年第5期67卷 91-97页

作者： Qichao Tian Chi Ding Xiaodong Qiu Qinghao Meng Kaili Wang Fan Yu Yuyang Mu Can Wang Jian Sun Yi Zhang national Laboratory of Solid State Microstructure School of PhysicsNanjing UniversityNanjing 20093China Collaborative Innovation Center of Advanced Microstructures Nanjing UniversityNanjing 210093China School of Physics and Electronic Sciences Changsha University of Science and TechnologyChangsha 410114China Hefei national Laboratory Hefei 230088China

Layered material TaS2hosts multiple structural phases and exotic correlated quantum states,including charge density wave(CDW),superconductivity,quantum spin liquid,and Mott insulating ***,we synthesized TaS_(2)monolayers in H and T phases using the molecular beam epitaxial(MBE)method and studied their electronic structures via angle-resolved photoemission spectroscopy(ARPES).We found that the H phase TaS_(2)(H-TaS_(2))monolayer is metallic,with an energy band crossing the Fermi *** contrast,the T phase TaS_(2)(T-TaS_(2))monolayer shows an insulated energy gap at the Fermi level,while the normal calculated band structure implies it should be metallic without any band ***,by considering Hubbard interaction potential U,further density functional theory(DFT)calculation suggests that monolayer T-TaS_(2)could be a CDW Mott insulator,and the DFT+U calculation matches well with the ARPES *** significantly,the temperature-dependent ARPES result indicates that the CDW Mott state in the T-TaS_(2)monolayer is more robust than its bulk counterpart and can persist at room *** results reveal that the dimensional effect can enhance the CDW Mott state and provide valuable insights for further exploring the exotic properties of monolayer TaS2.

关键词： temperature monolayer state

Filtration performance and modeling of granular bed for dust removal from coal pyrolytic vapors

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第1期65卷 35-42页

作者： Shuaiqiang Yang Lin Du Guangchao Ding Runguo Liu Wenli Song Songgeng Li State Key Laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China School of Petrochemical Engineering Yan’an Vocational and Technical CollegeYan’an 716000China Sino-Danish College University of Chinese Academy of SciencesBeijing 100049China

Dust removal from pyrolytic vapors at high temperatures is an obstacle to the industrialization of the coal pyrolysis *** this work,a granular bed with expanded perlites as filtration media was designed and integrated into a 10 t·d^(–1)coal pyrolysis *** testing results showed that around 97.56%dust collection efficiency was *** a result,dust content in tar was significantly *** pressure drop of the granular bed maintained in the range of 356 Pa to 489 *** dust size in the effluent after filtration exhibited a bimodal distribution,which was attributed to the heterogeneity of the dust *** effects of filtration bed on pyrolytic product yields were also discussed.A modified filtration model based on the macroscopic phenomenological theory was proposed to describe the performance of the granular *** computation results were well agreed with the experimental data.

关键词： Granular bed filtration Dust removal Pyrolysis Filtration Fixed-bed

Non-volatile dynamically switchable color display via chalcogenide stepwise cavity resonators

在线全文

学校读者我要写书评

暂无评论

Opto-Electronic Advances 2024年第1期7卷 16-27页

作者： Kuan Liu Zhenyuan Lin Bing Han Minghui Hong Tun Cao School of Optoelectronic Engineering and Instrumentation Science Dalian University of TechnologyDalian 116024China Pen-Tung Sah Institute of Micro-Nano Science and technology Xiamen UniversityXiamen 361102China Institute of Laser Engineering Faculty of Materials and ManufacturingBeijing University of TechnologyBeijing 100124China

high-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic *** trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying ***,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity *** device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost *** switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively *** color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase ***,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far *** minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) *** switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,***,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.

关键词： tunable color displays Fabry-Pérot cavity resonators color printing chalcogenide materials

Exploring a balance between strength and ductility of hexagonal BN nanoplatelet reinforced ZK61 magnesium composite

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1899-1910页

作者： Kewei Zhang Xiaolong Lu Yufeng Sun Shaokang Guan Yao Chen School of Materials Science and Engineering Zhengzhou University Key Laboratory of Advanced Magnesium Alloys in Henan Province Zhengzhou University Key Laboratory of Advanced Materials Processing&Mold Ministry of Education School of Mechanical and Electrical Engineering Soochow University

The practical applications of magnesium（Mg） alloys are usually beset by their relatively low strength and limited ductility. Herein we attempt to fabricate hexagonal BN nanoplatelet（BNNP） reinforced ZK61 magnesium composites using a combination of spark plasma sintering and friction stir processing. The resulting composites exhibit microstructural characteristics of homogeneous dispersion of BNNP in Mg matrix with refined equiaxed grains and（0002） basal texture roughly surrounding the pin column surface. Transmission electron microscopy observation illustrates that trace amounts of Mg3N2and MgB2form at BNNP-Mg interface, in which Mg3N2locates at the basal plane of a BNNP and MgB2grows at its open edge. The spatial distribution of Mg3N2and MgB2facilitates interfacial wetting and stronger BNNP-Mg interface in such a way that interfacial products act as anchors bonding between them. In comparison with monolithic ZK61 alloy,the BNNP/ZK61 composites display simultaneous improvements in yield strength, hardness and ductility, achieving good strength-ductility balance. This research is expected to shed some light on BNNP potentials for designing and producing magnesium composites with high strength and good ductility.

关键词： BN nanoplatelet Magnesium composite Strength Ductility Spark plasma sintering Friction stir processing

CD87-targeted BiT E and CAR-T cells potently inhibit invasive nonfunctional pituitary adenomas

在线全文

学校读者我要写书评

暂无评论

Science china Life Sciences 2024年

作者： Yuan Ren Xinjie Bao Ming Feng Bing Xing Wei Lian Yong Yao Renzhi Wang Department of Neurosurgery Peking Union Medical College Hospital Chinese Academy of Medical Sciences and Peking Union Medical College

Recently, bispecific T-cell engagers(BiTEs) and chimeric antigen receptor-modified T cells(CAR-Ts) have been shown to have high therapeutic efficacy in hematological tumors. CD87 is highly expressed in solid tumors with an oncogenic function. To assess their cytotoxic effects on invasive nonfunctioning pituitary adenomas(iNFPAs), we first examined CD87 expression and its effects on the metabolism of iNFPA cells. We generated CD87-specific BiTE and CAR/IL-12 T cells, and their cytotoxic effects on iNFPAs cells and in mouse models were determined. CD87 had high expression in i NFPA tissue and cell samples but was undetected in noncancerous brain samples. CD87×CD3BiTE and CD87 CAR/IL-12 T-cells showed antigenic specificity and exerted satisfactory cytotoxic effects, decreasing tumor cell proliferation in vitro and reducing existing tumors in experimental mice. Overall, the above findings suggest that CD87 is a promising target for the immunotherapeutic management of iNFPAs using anti-CD87 BiTE and CD87-specific CAR/IL-12 T cells.

关键词：

Machine learning for predicting fatigue properties of additively manufactured materials

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 1-22页

作者： Min YI Ming XUE Peihong CONG Yang SONG Haiyang ZHANG Lingfeng WANG Liucheng ZHOU Yinghong LI Wanlin GUO State Key Laboratory of Mechanics and Control for Aerospace Structures Nanjing University of Aeronautics and AstronauticsNanjing 210016China Institute for Frontier Science Nanjing University of Aeronautics and AstronauticsNanjing 210016China College of Aerospace Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China Shenyang Engine research Institute Shenyang 110015China Liaoning Key Laboratory of Impact Dynamics on Aero Engine Shenyang 110015China Science and technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi’an 710038China

Fatigue properties of materials by Additive Manufacturing(AM) depend on many factors such as AM processing parameter, microstructure, residual stress, surface roughness, porosities, post-treatments, etc. Their evaluation inevitably requires these factors combined as many as possible, thus resulting in low efficiency and high cost. In recent years, their assessment by leveraging the power of Machine Learning(ML) has gained increasing attentions. A comprehensive overview on the state-of-the-art progress of applying ML strategies to predict fatigue properties of AM materials, as well as their dependence on AM processing and post-processing parameters such as laser power, scanning speed, layer height, hatch distance, built direction, post-heat temperature,etc., were presented. A few attempts in employing Feedforward Neural Network(FNN), Convolutional Neural Network(CNN), Adaptive Network-Based Fuzzy Inference System(ANFIS), Support Vector Machine(SVM) and Random Forest(RF) to predict fatigue life and RF to predict fatigue crack growth rate are summarized. The ML models for predicting AM materials' fatigue properties are found intrinsically similar to the commonly used ones, but are modified to involve AM features. Finally, an outlook for challenges(i.e., small dataset, multifarious features,overfitting, low interpretability, and unable extension from AM material data to structure life) and potential solutions for the ML prediction of AM materials' fatigue properties is provided.

关键词： Additive manufacturing Machine learning Fatigue life Fatigue crack growth rate Prediction

Boron nitride microribbons strengthened and toughened alumina composite ceramics with excellent mechanical,dielectric,and thermal conductivity properties

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 496-506页

作者： Jilin Wang Dongping Lu Weiping Xuan Yuchun Ji Ruiqi Chen Shaofei Li Wenbiao Li Wenzhuo Chen Shilin Tang Guoyuan Zheng Fei Long Guangxi Key Laboratory of Optical and Electronic Materials and Devices Collaborative Innovation Center for Exploration of Nonferrous Metal Deposits and Efficient Utilization of ResourcesSchool of Materials Science and EngineeringGuilin University of TechnologyGuilin 541004China Key Laboratory of New Processing technology for Nonferrous Metals and Materials of Ministry of Education Guilin University of TechnologyGuilin 541004China School of Materials Science and Engineering Peking UniversityBeijing 100871China Department of Civil and Environmental Engineering The Hong Kong Polytechnic UniversityKowloon 999077Hong KongChina

Aluminum oxide(Al_(2)O_(3))ceramics have been widely utilized as circuit substrates owing to their exceptional *** this study,boron nitride microribbon(BNMR)/Al_(2)O_(3)composite ceramics are prepared using spark plasma sintering(SPS).This study examines the effect of varying the amount of toughened phase BNMR on the density,mechanical properties,dielectric constant,and thermal conductivity of BNMR/Al_(2)O_(3)composite ceramics while also exploring the mechanisms behind the toughening and increased thermal conductivity of the fabricated *** results showed that for a BNMR content of 5 wt%,BNMR/Al_(2)O_(3)composite ceramics displayed more enhanced characteristics than pure Al_(2)O_(3)*** particular,the relative density,hardness,fracture toughness,and bending strength were 99.95%±0.025%,34.11±1.5 GPa,5.42±0.21 MPa·m^(1/2),and 375±2.5 MPa,*** values represent increases of 0.76%,70%,35%,and 25%,respectively,compared with the corresponding values for pure Al_(2)O_(3)***,during the SPS process,BNMRs are subjected to high temperatures and pressures,resulting in the bending and deformation of the Al_(2)O_(3)matrix;this leads to the formation of special thermal pathways within *** dielectric constant of the composite ceramics decreased by 25.6%,whereas the thermal conductivity increased by 45.6%compared with that of the pure Al_(2)O_(3)*** results of this study provide valuable insights into ways of enhancing the performance of Al_(2)O_(3)-based ceramic substrates by incorporating novel BNMRs as a second *** improvements are significant for potential applications in circuit substrates and related fields that require high-performance materials with improved mechanical properties and thermal conductivities.

关键词： boron nitride microribbons/aluminum oxide(BNMRs/Al_(2)O_(3))composite ceramics boron nitride microribbon(BNMR) spark plasma sintering(SPS) strengthening and toughening thermal conductivity

Rate-limiting factors in hydrate decomposition through depressurization across various scales:A mini-review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第3期67卷 206-219页

作者： Xian Sun Peng Xiao Qinfeng Shi Lingban Wang Zhenbin Xu Yuhao Bu Xiaohui Wang Yifei Sun Changyu Sun Guangjin Chen State Key Laboratory of Heavy Oil Processing China University of Petroleum(Beijing)Beijing 102249China Jining University Jining 273115China

Natural gas hydrate is an energy resource for methane that has a carbon quantity twice more than all traditional fossil fuels ***,their practical application in the field has been limited due to the challenges of long-term preparation,high costs and associated *** studies,on the other hand,offer a safe and cost-effective means of exploring the mechanisms of hydrate dissociation and optimizing exploitation *** hydrate decomposition is a complicated process along with intrinsic kinetics,mass transfer and heat transfer,which are the influencing factors for hydrate decomposition *** identification of the rate-limiting factor for hydrate dissociation during depressurization varies with the scale of the reservoir,making it challenging to extrapolate findings from laboratory experiments to the actual *** review aims to summarize current knowledge of investigations on hydrate decomposition on the subject of the research scale(core scale,middle scale,large scale and field tests)and to analyze determining factors for decomposition rate,considering the various research scales and their associated influencing factors.

关键词： Gas hydrate Rate-limiting factors research scale Depressurization Decomposition