检索结果-南通市图书馆

Rare Metals 2024年第5期43卷 2275-2281页

作者： Guo-Chao Li Xu Cheng Hua-Ming Wang national Engineering Laboratory of Additive Manufacturing for Large Metallic Components and Engineering Research Center of Ministry of Education on Laser Direct Manufacturing for Large Metallic Components School of Materials Science and EngineeringBeihang UniversityBeijing 100191China

The solid solution and aging treatment for conventional manufacturing processes might not be suitable for laser additive manufactured titanium alloys due to the different lamellar *** this study,the influence of aging temperatures(600,700 and 800°C)on microstructure and mechanical properties of titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si was *** results indicate that after solid solution treatment at 970°C followed by water quenching,the alloy mainly consists of coarsening lamellar a phase in martensite α' *** at 600°C will not change the size of primary lamellar α phase but lead to huge amount of secondary a phases(α_(s))generating with very fine *** increasing the aging temperature,the number of α_(s) decreases but with coarsened *** aged at 800°C,the width of the asphase reaches 350 nm,almost 7 times wider than that aged at 600°*** changing size of α_(s) obviously influences the property of the *** fine α_(s) leads to high strength and microhardness but low plasticity,and specimen aged at 700°C with suitable assize has the best comprehensive properties.

关键词： α+βtitanium alloy Laser additive manufacturing Solid solution and aging treatment Microstructure Room temperature tensile property

Investigation of the Corrosion and Passive Behavior of HP-13Cr Stainless Steel in Formate Annulus Protection Fluid

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1087-1103页

作者： Jidong Wang Tengfei Yin Wenlong Qi Xuanpeng Li Yang Zhao Tao Zhang Fuhui Wang Shenyang national Laboratory for Materials Science Northeastern UniversityShenyang110819China State Key Laboratory of Performance and Structural Safety for Petroleum Tubular Goods and Equipment Materials Tubular Goods Research InstituteCNPCXi’an710077China

The corrosion and passive behavior of HP-13Cr stainless steel(HP-13Cr SS)in formate annulus protection fluid was ***-13Cr SS exhibited good passive behavior in clean formate annulus protection fluid,which was attributed to a thinner and more dense passive film mainly composed of Cr_(2)O_(3).In the formation water solution,the passive film was composed of metastable Cr(OH)3,which was explained by the isoelectric point theory,resulting in the deterioration of the passive behavior of HP-13Cr *** the formation water penetrated the formate annulus protection fluid,a large number of loose FeCO_(3)particles formed in the corrosion scales,thus HP-13Cr SS suffered severe ***,avoiding formation water penetrating the formate annulus protection fluid is conducive to improving the service life of HP-13Cr SS oil tubes in extremely aggressive environment.

关键词： HP-13Cr SS Passive behavior Formate annulus protection fluid Isoelectric point

Corrosion behavior of Al_(2)O_(3)-C bricks in MnO-containing mold slag

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1486-1492页

作者： Yi-jiang Zhao Guang-qiang Li Yang Wu Cheng Yuan Ze Meng Xiao-xuan Deng Yu Liu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina Research Institute of Technology Shougang Group Co.Ltd.Beijing 100043China

In order to explore the corrosion mechanism of Al_(2)O_(3)-C refractories in the mold flux bearing MnO,the immersion test of Al_(2)O_(3)-C refractories in CaO-SiO2-CaF2-MnO slag with different MnO contents was carried out at 1550℃.The results show that Mn particles were observed in the slag after experiment,due to the reduction of MnO by graphite in *** amounts of graphite were observed at the interface between refractories and slag,indicating that the oxidation of graphite is limited by the poor contact between graphite and molten ***,the oxidation of graphite is not the main cause of damage to refractories.A small quantity of CaO·2Al_(2)O_(3)(CA_(2))and CaO·6Al_(2)O_(3)(CA_(6))adjacent to Al_(2)O_(3) grain was detected at the slag/reaction layer ***_(2) and CA_(6) possess relatively high melting points,which is beneficial to hindering the further penetration of ***,the dissolution of Al_(2)O_(3) into slag is still the main cause for refractories *** increase in the MnO content of mold slag decreases the viscosity and then results in the severe corrosion of Al_(2)O_(3)-C bricks.

关键词： Al_(2)O_(3)-C refractory MnO-containing slag Graphite Corrosion

A review of ultra-high temperature heat-resistant energetic materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第8期38卷 33-57页

作者： Rongzheng Zhang Yuangang Xu Feng Yang Pengcheng Wang Qiuhan Lin Hui Huang Ming Lu School of Chemistry and Chemical Engineering Nanjing University of Science and TechnologyNanjing 210094China Institute of Chemical Materials China Academy of Engineering PhysicsMianyang 621900China

Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed that the thermal stability can be enhanced by introducing amino groups to form intra/inter-molecular hydrogen bonds, constructing conjugate systems and designing symmetrical structures. This article aims to review the physical and chemical properties of ultra-high temperature heat-resistant energetic compounds and provide valuable theoretical insights for the preparation of ultra-high temperature heatresistant energetic materials. We also analyze the selected 20 heat-resistant energetic materials with decomposition temperatures higher than 350℃, serving as templates for the synthesis of various highperformance heat-resistant energetic materials.

关键词： Heat-resistant energetic materials Organic synthesis Conjugated Hydrogen bond Symmetrical structure Stabilization

Double-kill contribution of high-roughness high-density porous carbon electrodes to mechanically self-sensing supercapacitors

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 6157-6167页

作者： Jue Huang Pengyu Liu Yiqun Wang Keren Dai Qingyun Dou Yajiang Yin Xiaofeng Wang Zheng You Department of Precision Instrument Tsinghua UniversityBeijing 100084China State Key Laboratory of Precision Measurement Technology and Instruments Beijing 100084China Department of Materials Science and Engineering Sun Yat-Sen UniversityGuangzhou 510275China ZNDY of Ministerial Key Laboratory School of Mechanical EngineeringNanjing University of Science and TechnologyNanjing 210094China Qiyuan Laboratory Beijing 100095China

Impact detecting and counting are fundamental functions of fuses used in hard target penetration ***,detection failure caused by battery breakdown in high-g acceleration environments poses a vulnerability for such *** paper introduces a novel supercapacitor that combines energy storage and high-g impact detection,called self-sensing *** deliberately inducing a transient soft short-circuit during shock in the supercapacitor,it is possible to detect external impact by its transient voltage *** realize this concept,firstly,by introducing the contact theory and force-induced percolation model,the electrode strength and roughness are found to have key impacts on the formation of soft ***,to meet the needs for sensitivity and capacity,a high-density porous carbon(HDPC)that combines high mechanical strength and porosity,is selected as a suitable candidate based on the analysis ***,a two-step curing method is proposed to prepare the high-roughness HDPC(HRHDPC)electrode and to assemble the self-sensing *** to the rich specific surface of the electrodes and the high surface strength and roughness conducive to the formation of transient soft short circuits,the self-sensing supercapacitor not only possesses an excellent specific capacitance(171 F/g at 0.5 A/g)but also generates significant voltage response signals when subjected to high-g impacts ranging from 8000g to 31,***,the self-sensing supercapacitor is applied to compose a successive high-g impact counting system and compared to traditional solutions(sensors and tantalum capacitors)in the military *** results show that the self-sensing supercapacitor-based system exhibits advantages in terms of size,power consumption,and counting accuracy.

关键词： supercapacitor self-sensing soft short-circuit impact sensing

Enhanced Flexoelectricity in Barium Titanate-Cellulose Composite Thin Films

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第4期37卷 521-527页

作者： Wensi Xing Hongyu Cao Xin Zhang Xu Liang Jianwei Song Shengping Shen Chemomechanics and Intelligent Media Laboratory State Key Laboratory for Strength and Vibration of Mechanical StructuresSchool of Aerospace EngineeringXi’an Jiaotong UniversityXi’an710049China

Biopolymers,the potential flexoelectric materials,are environment-friendly,degradable,lightweight,cost-effective,and possess remarkable processing properties catering to the requirements of advanced ***,the flexoelectric coefficient of biopolymers is normally much weaker than that of ceramic materials,limiting their potential applications for designing high-performance green electromechanical coupling *** improve the flexoelectric response in biopolymers,we composited barium titanate(BTO)with 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibrils(TOCNF)to enhance the flexoelectric response of *** to the high permittivity and flexoelectric effect of BTO,the relative dielectric constant and flexoelectric coefficient of 33.3 wt%BTO-TOCNF films reached 30.94@1 kHz and 50.05±1.88 nC/m@1 Hz,which were almost 172 times and 27 times higher than those of TOCNF,*** composite thin film contains high dielectric constant and flexoelectric coefficient,as well as excellent *** study provided a straightforward and efficient method for improving the flexoelectric effect of biopolymers,and demonstrated its great potential applications in flexoelectric-based devices.

关键词： Flexoelectricity Cellulose BaTiO_(3) Composite Thin films

A brand new green coating technology for realizing the regulation of spherical propellant energy release process

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第6期36卷 78-94页

作者： Wenhao Fan Yajun Ding Zhongliang Xiao School of Chemistry and Chemical Engineering Nanjing University of Science and TechnologyNanjing210094China Key Laboratory of Special Energy Materials Nanjing University of Science and TechnologyMinistry of EducationNanjing 210094China

To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first *** effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first *** microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical ***,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.

关键词： Nanocomposites aqueous coating Fluidized bed coating equipment Coated spherical propellant Controllable release of energy Long storage stability

A Simple-Prepared and Multi-Reusable Adhesive Based on Epoxy Vitrimer

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第10期42卷 1589-1594,I0015页

作者： Yu-Ting Wang Huan Liang Yen Wei Jian-Long Wang Xiang-Ming He Yang Yang Institute of Nuclear and New Energy Technology Tsinghua UniversityBeijing100084China The Key Laboratory of Bioorganic Phosphorus Chemistry&Chemical Biology(Ministry of Education) Department of ChemistryTsinghua UniversityBeijing100084China

Adhesives play an important role in modern society's production and daily *** robust and sustainable adhesives remains a great *** we report a sustainable epoxy-vitrimer adhesive with high adhesive strength(about 10 MPa)and reusability(82%strength after 3 times).This adhesive can be fabricated from commercially available products through a straightforward hot-pressing method without the need of *** adhesive process is also simple,requiring only 30 min at 180℃.In addition,the vitrimer adhesive has the advantages of both erasability for reuse and excellent water *** work provides a facile strategy to fabricate high-strength adhesive that ensures reusability,recyclability,low cost of raw materials,and simple processing ***,it expands the range of potential applications for epoxy vitrimers.

关键词： Epoxy Vitrimer Adhesive Reusable Sustainable

Synergistic strengthening mechanism of Ca^(2+)-sodium silicate to selective separation of feldspar and quartz

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 1985-1995页

作者： Bo Lin Jingzhong Kuang Yiqiang Yang Zheyu Huang Delong Yang Mingming Yu School of Resources and Environmental Engineering Jiangxi University of Science and TechnologyGanzhou 341000China Jiangxi Key Laboratory of Mining Engineering Ganzhou 341000China

Inhibitors are important for flotation separation of quartz and *** this study,a novel combined inhibitor was used to separate quartz and feldspar in near-neutral *** inhibition of the combined inhibitor was assessed by micro-flotation *** a series of detection methods were used to detect differences in the surface properties of feldspars and quartz after flotation reagents and put forward the synergistic strengthening *** outcomes were pointed out that pre-mixing combined inhibitors were more effective than the addition of Ca^(2+)and SS in sequence under the optimal proportion of 1:5.A concentrate from artificial mixed minerals that was characterized by a high quartz grade and a high recovery was acquired,and was found to be 90.70wt% and 83.70%,*** was demonstrated that the combined inhibitor selectively prevented the action of the collector and feldspar from Fourier-transform infrared(FT-IR)and adsorption capacity *** results of X-ray photoelectron spectroscopy(XPS)indicated that Ca^(2+)directly interacts with the surface of quartz to increase the adsorption of *** contrast,the chemistry property of Al on the feldspar surface was altered by combined inhibitor due to Na^(+)and Ca^(2+)taking the place of K^(+),resulting in the composite inhibitor forms a hydrophilic structure,which prevents the adsorption of the collector on the surface of feldspar by interacting with the Al active *** combination of Ca^(2+)and SS synergically strengthens the difference of collecting property between quartz and feldspar by collector,thus achieving the effect of efficient separation.A new strategy for flotation to separate quartz from feldspar in near-neutral pulp was provided.

关键词： feldspar quartz Ca^(2+)-sodium silicate selective adsorption flotation separation

Concise extraction and characterization of the pore-throat network in unconventional hydrocarbon reservoirs: A new perspective

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1474-1487页

作者： Shu-Heng Du Yong-Min Shi State Key Laboratory of Nonlinear Mechanics Institute of MechanicsChinese Academy of SciencesBeijing100190China School of Engineering Science University of Chinese Academy of SciencesBeijing100049China School of Earth and Space Sciences Peking UniversityBeijing100871China

In this study,a new image-based method for the extraction and characterization of pore-throat network for unconventional hydrocarbon storage and exploitation is proposed.“Pore-throat solidity”,which is analogous to particle solidity,and a new method for automatic identification of pores and throats in tight sandstone oil reservoirs are ***,the“pore-throat combination”and“pure pore”are defined and distinguished by drawing the cumulative probability curve of the pore-throat solidity and by selecting an appropriate cutoff *** the discrete grid set is recognized as a pore-throat combination,Legendre ellipse fitting and minimum Feret diameter are *** the pore and throat grid sets are identified as pure pores,the pore diameter can be directly *** the new method,the analytical results for the physical parameters and pore radius agree well with most prior *** results comparing the maximum ball and the new model could also prove the accuracy of the latter's in micro and nano *** new model provides a more practical theoretical basis and a new calculation method for the rapid and accurate evaluation of the complex processes of oil migration.

关键词： Hydrocarbon exploitation Pore Throat Porous media Identification