检索结果-南通市图书馆

Development and performance evaluation of high temperature resistant strong adsorption rigid blocking agent

Petroleum science 2024年第4期21卷 2650-2662页

作者： Zhe Xu Jin-Sheng Sun Jing-Ping Liu Kai-He Lv Xiao-Dong Dong Zong-Lun Wang Tai-Feng Zhang Yuan-Wei Sun Zhi-Wen Dai School of Petroleum Engineering China University of Petroleum (East China) CNPC Engineering Techno.ogy R&D Company Limited

As drilling wells continue to move into deep ultra-deep layers, the requirements for temperature resistance of drilling fluid treatments are getting higher and higher. Among them, blocking agent, as one of the key treatment agents, has also become a hot spot of research. In this study, a high temperature resistant strong adsorption rigid blocking agent(QW-1) was prepared using KH570 modified silica,acrylamide(AM) and allyltrimethylammonium chloride(TMAAC). QW-1 has good thermal stability,average particle size of 1.46 μm, water contact angle of 10.5., has a strong hydrophilicity, can be well dispersed in water. The experimental results showed that when 2 wt% QW-1 was added to recipe A(4 wt% bentonite slurry+0.5 wt% DSP-1(filtration loss depressant)), the API filtration loss decreased from 7.8to 6.4 m L. After aging at 240.C, the API loss of filtration was reduced from 21 to 14 m L, which has certain performance of high temperature loss of filtration. At the same time, it is effective in sealing 80-100mesh and 100-120 mesh sand beds as well as 3 and 5 μm ceramic sand discs. Under the same conditions,the blocking performance was superior to silica(5 μm) and calcium carbonate(2.6 μm). In addition, the mechanism of action of QW-1 was further investigated. The results show that QW-1 with amide and quaternary ammonium groups on the molecular chain can be adsorbed onto the surface of clay particles through hydrogen bonding and electrostatic interaction to form a dense blocking layer, thus preventing further intrusion of drilling fluid into the formation.

关键词： High adsorption Rigid microsphere High temperature resistance Blocking performance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Study on the tribological properties of metal rolling bearing under lubrication with diketone lubricants

引用

science china(Techno.ogical sciences) 2024年第7期67卷 2003-2017页

作者： DU ShaoNan ZHANG ChenHui LUO Zhi State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Beijing national Laboratory of Molecular sciences CAS Key Laboratory of Engineering PlasticsInstitute of ChemistryChinese Academy of SciencesBeijing 100190China

In this article, 1-(4-ethylphenyl)-no.ane-1,3-dione(0206) was prepared by Claisen condensation. By mixing 0206, chelate, and base oil in a ratio of 3.2:4.8:2, a diketone lubricant(PAO=14(20%)) that can achieve superlubricity was prepared and applied to bearing lubrication experiments. The experimental results show that when the bearing was lubricated by base oil, the friction coefficient(COF) and temperature rise decreased with the decrease of the viscosity of PAO. When PAO=14(20%) was used as the lubricant, the COF of the bearing was the lowest(0.001), and the wear morphology was comparable to that of the bearing lubricated with commercial lubricant. Compared with the base oil with the same viscosity, it is found that the COF and temperature rise of the bearing lubricated by PAO=14(20%) were lower under any experimental conditions. And when the amount of lubricant added was 10 μL, the COF of the bearing lubricated by PAO=14(20%) reached a very low value(0.0004).Bearing ball surface analysis identified the formation of diketone adsorption films. Combined with the previous PAO=14(20%)superlubricity mechanism, it was considered that the occurrence of tribochemical reaction and the bearing effect of chelates were the main reasons for the existence of ultra-low friction coefficient and low wear. In addition, when there were polar molecules in the lubricant, they were adsorbed on the metal surface through tribochemical reactions, resulting in many irregular pits on the surface.

关键词： superlubricity diketone chelate tribochemical recations bearing lubrication

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Image attention transformer network for indoor 3D object detection

引用

science china(Techno.ogical sciences) 2024年第7期67卷 2176-2190页

作者： REN KeYan YAN Tong HU ZhaoXin HAN HongGui ZHANG YunLu Faculty of Information Techno.ogy Beijing University of TechnologyBeijing 100124China

Point clouds and RGB images are both critical data for 3D object detection. While recent multi-modal methods combine them directly and show remarkable performances, they igno.e the distinct forms of these two types of data. For mitigating the influence of this intrinsic difference on performance, we propose a no.el but effective fusion model named LI-Attention model, which takes both RGB features and point cloud features into consideration and assigns a weight to each RGB feature by attention ***, based on the LI-Attention model, we propose a 3D object detection method called image attention transformer network(IAT-Net) specialized for indoor RGB-D scene. Compared with previous work on multi-modal detection, IAT-Net fuses elaborate RGB features from 2D detection results with point cloud features in attention mechanism, meanwhile generates and refines 3D detection results with transformer model. Extensive experiments demonstrate that our approach outperforms stateof-the-art performance on two widely used benchmarks of indoor 3D object detection, SUN RGB-D and NYU Depth V2, while ablation studies have been provided to analyze the effect of each module. And the source code for the proposed IAT-Net is publicly available at https://***/wisper181/IAT-Net.

关键词： 3D object detection transformer attention mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An Icy Worlds life detection strategy based on Exo-AUV

引用

science china Earth sciences 2024年第11期67卷 3515-3535页

作者： Bin WANG Hongde QIN national Key Laboratory of Autono.ous Marine Vehicle Techno.ogy Harbin Engineering University Shipbuilding Engineering College Harbin Engineering University

In the solar system, Icy Worlds such as Europa and Enceladus hold great potential for extraterrestrial life and may provide humanity an answer, within this century, to the age-old question of life beyond Earth. Exo-AUV techno.ogy shows promise in life detection in the icy shell, at the ice-water interface and on the seafloor of exo-ocean. Space agencies, including NASA and DLR, are enthusiastic about deploying Exo-AUVs to explore life in these regions. However, the where and how to find life, the techno.ogies to be utilized and the goals to be achieved are crucial aspects for future Exo-AUV life detection missions on Icy Worlds. This study delves into a hypothetical mission of life detection on Europa, discussing science goals,detectable objects, potential regions and biogenic analysis for Icy Worlds. It proposes a life detection strategy for Icy Worlds based on Exo-AUVs, presents key contextual elements for Exo-AUV operations, outlines techno.ogical requirements for hull,payloads and autono.y, introduces the current state of Exo-AUV research and addresses existing challenges. This study also suggests a roadmap for conceptual development of Exo-AUV and a Concept of Operations for Multiple Exo-AUV System(Cono.s for MEAS). This system aims to assist planetary scientists and astrobiologists in exploring Icy Worlds, identifying robust biosignatures and potentially discovering extant organisms, even prebiotic chemical systems.

关键词： Icy Worlds Europa Life detection Biological potential Exo-AUV

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Event-triggered sliding mode control of linear repetitive processes and its application in metal rolling process

引用

science china(Information sciences) 2024年第3期67卷 167-181页

作者： Xinyu LV Yugang NIU James LAM Key Laboratory of Smart Manufacturing in Energy Chemical Process (East china University of science and Techno.ogy) Ministry of Education Department of Mechanical Engineering The University of Hong Kong

This paper investigates the design problem of a sliding mode controller for linear repetitive processes(LRPs) with a finite pass length on each pass. Under limited communication resources, an eventtriggered mechanism is implemented from the sensors to the controller, whose triggered sequence is consistent with the evolution direction of LRPs. To periodically orchestrate communication between the controller and actuator, a round-robin scheduling mechanism is established based on the pass length. A sliding function involving the state and pass profile is constructed, and the sliding mode controller is designed using triggered states and pass profile signals. Feasible controller gains are attained to ensure the stability of the resultant closed-loop system. Finally, the proposed strategy is implemented for a multi-roll metal rolling process.

关键词： event-triggered mechanism linear repetitive processes metal rolling process round-robin scheduling sliding mode control

来源：

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two-temperature modeling of lamellar cathode arc

引用

Plasma science and Techno.ogy 2024年第6期26卷 120-139页

作者：李渊博刘兴叶韬 School of Materials science and Engineering Lanzhou Jiaotong UniversityLanzhou 730070People’s Republic of China

A three-dimensional, two-temperature(2T) model of a lamellar cathode arc is constructed,drawing upon the conservation equations for mass, momentum, electron energy, and heavy particle energy, in addition to Maxwell's equations. The model aims to elucidate how the physical properties of electrons and heavy particles affect heat transfer and fluid flow in a lamellar cathode arc. This is achieved by solving and comparing the fields of electron temperature,heavy particle temperature, fluid flow, current density, and Lorentz force distribution under varying welding currents. The results show that the guiding effect of the lamellar cathode on current density, the inertial drag effect of moving arc, and the attraction effect of Lorentz force at the lamellar cathode tip primarily govern the distribution of the arc's physical fields. The guiding effect localizes the current density to the front end of the lamellar cathode, particularly where the discharge gap is minimal. Both the inertial drag effect and the attraction effect of Lorentz force direct arc flow toward its periphery. Under the influence of the aforementioned factors, the physical fields of the lamellar cathode arc undergo expansion and shift counter to the arc's direction of motion. A reduction in welding current substantially weakens the guiding effect,causing the arc's physical fields to deviate further in the direction opposite to the arc motion. In comparison with a cylindrical cathode arc, the physical fields of the lamellar cathode arc are markedly expanded, leading to a reduction in current density, electron temperature, heavy particle temperature, cathode jet flow velocity, and Lorentz force.

关键词： numerical simulation two-temperature model welding arc

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

no.linearly induced entanglement in dissipatively coupled optomechanical system

引用

Chinese Physics B 2024年第6期33卷 255-260页

作者：杨文全冷轩程泂张闻钊 Department of Physics Ningbo UniversityNingbo 315211China

no.linearly induced steady-state photon–phono. entanglement of a dissipative coupled system is studied in the bistable regime. Quantum dynamical characteristics are analysed by solving the mean-field and fluctuation equations of the system. It is shown that dissipative coupling can induce bistable behaviour for the effective dissipation of the *** suitable parameters, one of the steady states significantly reduces the dissipative effect of the system. Consequently,a larger steady-state entanglement can be achieved compared to linear dynamics. Furthermore, the experimental feasibility of the parameters is analysed. Our results provide a new perspective for the implementation of steady-state optomechanical entanglement.

关键词： entanglement optomechanical system dissipatively coupling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advancing electrochemical drilling process via coupling of flow field and electric field in pulsating state generated by a no.el tube tool

引用

Chinese Journal of Aeronautics 2024年第4期37卷 542-555页

作者： Liang CHENG Xiaolei CHEN Zhisen YE Yongjun ZHANG State Key Laboratory of Precision Electronic Manufacturing Techno.ogy and Equipment Guangdong University of TechnologyGuangzhou 510006China Guangdong Key Laboratory of Advanced Manufacturing Techno.ogy of Marine Energy Equipment Guangdong University of TechnologyGuangzhou 510006China Guangzhou Key Laboratory of no.traditional Machining and Equipment Guangdong University of TechnologyGuangzhou 510006China

This paper introduces an improvement to electrochemical drilling process by coupling flow field and electric field in pulsating state. A no.el tube with half-wedged shape at the end(HW-tube) is prepared, with both sidewall and wedged part of the HW-tube insulated. Only the flat part is utilized to provide electric field for electrochemical drilling. By rotating the HW-tube, both flow field and electric field in pulsating state are generated, alternating in different positions within the inter-electrode gap(IEG). The pulsating flow field enhances the mass transfer process, while pulsating electric field disperses material dissolution process and distribution of electrolytic byproducts. Both pulsating fields are coupled at the same frequency, further enhancing the electrochemical drilling process. Simulation results indicate that both flow field and electric field in pulsating state are generated. Compared to the traditional tube, the HW-tube significantly reduces the number of residual particles in IEG, and this number is further reduced by increasing the rotation speed. Experimental results reveal that the surface quality and dimensional uniformity of small hole are improved with HW-tube. With feed rate of 2.22 mm/min, a small hole with diameter of 1.52± 0.017 mm is drilled, resulting in a surface roughness of 0.331 μm.

关键词： Small holes Electrochemical drilling Tools Pulsating flow field Pulsating electric field

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A FAS approach for stabilization of generalized chained forms: part 2. Continuous control laws

引用

science china(Information sciences) 2024年第3期67卷 114-135页

作者： Guang-Ren DUAN Center for Control Theory and Guidance Techno.ogy Harbin Institute of Technology Shenzhen Key Laboratory of Control Theory and Intelligent Systems Southern University of Science and Technology

In this paper, continuous time-varying stabilizing controllers for the type of general no.holono.ic systems proposed and treated in part 1 are designed using the fully actuated system(FAS) approach. The key step is to differentiate the first scalar equation, and by control of the obtained second-order scalar system, a proportional plus integral feedback form for the first control variable is obtained. With the solution to this designed second-order scalar system, the rest equations in the no.holono.ic system form an independent time-varying subsystem which is then handled by the FAS approach. The overall designed controller contains an almost arbitrarily chosen design parameter, and is proven to guarantee the uniformly and globally exponential stability of the closed-loop system. The proposed approach is simple and effective,and is demonstrated with a practical example of ship control.

关键词： no.holono.ic systems feedback stabilization fully actuated systems Lyapuno. stability continuous controllers

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Numerical and theoretical study of large-scale failure of strata overlying sublevel caving mines with steeply dipping discontinuities

引用

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1799-1815页

作者： Kaizong Xia Zhiwei Si Congxin Chen Xiaoshuang Li Junpeng Zou Jiahao Yuan State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan 430071China University of Chinese Academy of sciences Beijing 100049China School of Urban Construction Changzhou UniversityChangzhou 213164China Faculty of Engineering China University of Geosciences(Wuhan)Wuhan 430074China

The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical ***,an expression for the no.mal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium *** results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition ***,failure first occurs in certain superimposed strata slightly far from the ***,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the *** process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the *** deep fracture plane generally makes an angle of 12°-20°with the no.mal to the steeply dipping *** effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than *** strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling ***,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever *** taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the ke

关键词： sublevel caving mines universal distinct element code(UDEC)numerical approach large-scale ground movement steeply dipping superimposed cantilever beam toppling failure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：