检索结果-南通市图书馆

Effect of Artificial Cooling Extrusion on Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

Acta Metallurgica Sinica(English Letters) 2024年第7期37卷 1115-1127页

作者： Qi-Yu Liao Da-zhi Zhao Qi-Chi Le wen-Xin Hu Yan-Chao jiang Wei-Yang Zhou Liang Ren Dan-Dan Li Zhao-Yang Yin School of Materials Science and Engineering Northeastern UniversityShenyang110819China Key Laboratory of Electromagnetic Processing of Materials Ministry of EducationNortheastern UniversityShenyang110819China Key Laboratory of Lightweight Structural Materials Liaoning ProvinceNortheastern UniversityShenyang110819China Baotou Research Institute of Rare Earths Baotou014000China

Microstructure and mechanical properties of Mg–Zn–Y alloys with different Zn/Y atomic ratios with or without artificial cooling (AC) extrusion were systematically investigated in this work. The results show that bimodal microstructure consisting of submicron dynamic recrystallized (DRXed) grains with high fraction of low-angle grain boundaries (LAGBs) and elongated unDRXed grains was formed in Mg_(98.7)Zn_(1)Y_(0.3) alloy with AC extrusion. The AC process effectively limits the growth of precipitated phases, and large amount of nanoscale precipitates were dynamically precipitated during the extrusion process. AC extrusion could effectually refine the lamellar 14H LPSO phases and inhibit the transition from stacking faults to LSPO phases in Mg_(98)Zn_(1)Y_(1) alloy and the narrow LPSO phase in Mg_(98)Zn_(1)Y_(1)-AC alloy which could promote the nucleation of DRXed grains. The AC extrusion significantly improves the strength of Mg–Zn–Y alloys. Owing to AC extrusion, the strength improvement of Mg_(98.7)Zn_(1)Y_(0.3) alloy is mainly attributed to fine grain strengthening, dislocation strengthening, and nano-phases precipitation strengthening. After AC process, more fine grains and nano-phases jointly strengthen the Mg_(98)Zn_(1)Y_(1) alloy. The Mg_(98)Zn_(1)Y_(1) alloy obtains optimal mechanical properties after extrusion at 623 K, with ultimate tensile strength (UTS) of 406 MPa, yield strength (YS) of 388 MPa, and elongation (EL) of 5.6%.

关键词： Mg-Zn-Y Artificial cooling Extrusion Microstructure Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Gelation mechanisms of gel polymer electrolytes for zinc-based batteries

引用

Chinese Chemical Letters 2024年第5期35卷 97-116页

作者： Mengjun Sun zhi Wang Jvhui jiang Xiaobing Wang Chuang Yu Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals Key Laboratory of Green Chemical Media and ReactionsMinistry of EducationSchool of Chemistry and Chemical EngineeringHenan Normal UniversityXinxiang 453007China Key Laboratory for Yellow River and Huaihe River Water Environment and Pollution Control Ministry of EducationHenan Key Laboratory for Environmental Pollution ControlSchool of EnvironmentHenan Normal UniversityXinxiang 453007China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Zinc-based batteries(ZBs)have been deemed as a potential substitute for lithium-ion batteries due to its unique advantages of abundant resources,low cost and acceptable energy *** great progress in designing electrode materials has been made,the development of high-performance ZBs still remain challenges,such as the dendrite growth of zinc anode,hydrogen evolution reaction,limited electrochemical stability window,water evaporation and liquid *** polymer electrolytes(GPEs),including hydrous GPEs with low content of active water and anhydrous GPEs without the presence of water,are proposed to avoid these ***,employing GPEs is conductive to fabricate flexible devices owing to the good mechanical *** date,most of researches focus on discovering new GPEs and exploring its application on flexible or wearable *** reviews also have outlined the polymer matrixes and advances of GPEs in various battery *** this,herein,we seek to summarize the gelation mechanisms of GPEs,involving physical gel of polymer,chemical crosslinking of polymer and chemical polymerization of ***,the preparation methods are also *** addition,not only the features and central conundrum of GPEs are analyzed but also the corresponding strategies are discussed,contributing to design GPEs with ideal properties for high-performance ZBs.

关键词： Gelation mechanisms Gel polymer electrolytes Zinc-based batteries Gelation methods

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Micromechanical modeling of longitudinal tensile behavior and failure mechanism of unidirectional carbon fiber/aluminum composites involving fiber strength dispersion

引用

Chinese Journal of Aeronautics 2024年第9期37卷 312-327页

作者： Qipeng LIU wengang jiang Yuehua GAO Zhenjun WANG Shanshan SHI zhi SUN jiangxi Key Laboratory of Forming and Joining Technology for Aerospace Components Nanchang Hangkong UniversityNanchang 330063China School of Locomotive and Rolling Stock Engineering Dalian Jiaotong UniversityDalian 116028China State Key Laboratory of Structural Analysis Optimization and CAE Software for Industrial EquipmentDalian University of TechnologyDalian 116024China

This paper examines the longitudinal tensile behavior and failure mechanism of a new unidirectional carbon fiber reinforced aluminum composite through experiments and simulations.A Weibull distribution model was established to describe the fiber strength dispersion based on single-fiber tensile tests for carbon fibers extracted from the *** constitutive models for the matrix and interface were established based on the uniaxial tensile and single-fiber push-out tests,***,a 3D micromechanical numerical model,innovatively considering the fiber strength dispersion by use of the weakest link and Weibull distribution theories,was estab-lished to simulate the progressive failure behavior of the composite under longitudinal *** to the dispersion of fiber strength,the weakest link of the fiber first fractures,and stress concentra-tion occurs in the surrounding fibers,interfaces,and *** maximum stress concentration fac-tor for neighboring fibers varies nonlinearly with the distance from the fractured *** isolated and clustered fractured fibers are present during the progressive failure process of the *** expansion of fractured fiber clusters intensifies stress concentration and material degradation which in turn enlarges the fractured fiber clusters,and their mutual action leads to the final collapse of the composite.

关键词： Fiber reinforced metals Finite element method 3D micromechanical model Fiber strength dispersion Longitudinal tension Progressive failure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green synthesis of luminescent La-MOF nanoparticle from waste poly(ethylene terephthalate) for high-performance in Fe(Ⅲ) detection

引用

Rare Metals 2024年第8期43卷 3833-3843页

作者： zhi Gong zhi-Kui Dai zhi-Yue Dong Qiu-Xuan Liu Valentin A.Milichko Hua-Jian Liu Jie Liu Ran Niu jiang Gong Key Laboratory of Material Chemistry for Energy Conversion and Storage Hubei Key Laboratory of Material Chemistry and Service FailureHubei Engineering Research Center for Biomaterials and Medical Protective MaterialsSemiconductor Chemistry CenterSchool of Chemistry and Chemical EngineeringMinistry of EducationHuazhong University of Science and TechnologyWuhan 430074China School of Chemical Engineering and Pharmacy Wuhan Institute of TechnologyWuhan 430073China Collaborative Innovation Center for Advanced Organic Chemical Materials Co-constructed by the Province and Ministry Ministry of Education Key Laboratory for the Synthesis and Application of Organic Functional Molecules and College of Chemistry and Chemical EngineeringHubei UniversityWuhan 430062China School of Physics and Engineering ITMO UniversitySt.Petersburg197101Russia School of Materials Science and Engineering Hubei UniversityWuhan430062China Guangdong Provincial Key Laboratory of Technique and Equipment for Macromolecular Advanced Manufacturing School of Mechanical and Automotive EngineeringKey Laboratory of Polymer Processing EngineeringMinistry of EducationSouth China University of TechnologyGuangzhou 510641China

Developing luminescent metal-organic frameworks(MOFs) capable of high-efficiency Fe^(3+)sensing has aroused great attraction in the fields of biology,chemistry,***,previous solvothermal methods are limited by organic solvent usage,time consuming,high pressure,and high-energy ***,we propose the waste-toMOF strategy towards the scale-up production of La-MOF nanoparticles through the ball milling of recycled poly(-ethylene terephthalate)(PET) bottles and La(NO_(3))_(3)·_(6)H_(2)*** goes on alkaline hydrolysis to form 1,4-benzenedicarboxylic acid sodium salt(Na_(2)BDC) and ethylene glycol by ball ***,BDC reacts with La^(3+)to form *** as-prepared La-MOF crystal nanoparticles possess a rod-like morphology with the size of few hundred ***,La-MOF nanoparticles display high selectivity and sensitivity for Fe^(3+)*** quenching constant and limit of detection are 5.29×10^(3)(mol·L^(-1))^(-1) and 0.147 μmol·L^(-1),respectively,thus surpassing many advanced Fe^(3+) *** to the result of density functional theory,the high Fe^(3+) detection performance of La-MOF is related to the complexing of Fe^(3+)with La-MOF,which leads to the gradual dissociation of the coordination bond between terephthalic acid and La^(3+).It is anticipated that the mechanochemistry milling-based wasteto-MOF strategy provides a new platform for the massive production of functional MOFs in a green manner.

关键词： Metal-organic framework Waste polyester Mechanochemistry milling Fluorescence sensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Role of Multi-scale Hierarchical Structures in Regulating Wetting State and Wetting Properties of Structured Surfaces

引用

Journal of Bionic Engineering 2024年第3期21卷 1347-1359页

作者： Yue jiang Xinyi Li zhichao Ma zhihui Zhang Cuie wen Zhonghao jiang Nan Lin Luquan Ren Key Laboratory of Bionic Engineering of Ministry of Education College of Biological and Agricultural EngineeringJilin UniversityChangchun130022China Hubei Provincial Engineering Technology Research Center for Microgrid College of Electrical Engineering and New EnergyChina Three Gorges UniversityYichang443002China School of Mechanical and Aerospace Engineering Jilin UniversityChangchun130025China Centre for Additive Manufacturing School of EngineeringRMIT UniversityMelbourneVictoria3001Australia Key Laboratory of Automobile Materials of Ministry of Education College of Materials Science and EngineeringJilin UniversityChangchun130025China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry Jilin UniversityChangchun130012China

Amplifying the intrinsic wettability of substrate material by changing the solid/liquid contact area is considered to be the main mechanism for controlling the wettability of rough or structured *** theoretical analysis and experimental exploration,we have found that in addition to this wettability structure amplification effect,the surface structure also simultaneously controls surface wettability by regulating the wetting state via changing the threshold Young angles of the Cassie-Baxter and wenzel wetting *** wetting state regulation effect provides us with an alternative strategy to overcome the inherent limitation in surface chemistry by tailoring surface *** wetting state regulation effect created by multi-scale hierarchical structures is quite significant and plays is a crucial role in promoting the superhydrophobicity,superhydrophilicity and the transition between these two extreme wetting properties,as well as stabilizing the Cassie-Baxter superhydrophobic state on the fabricated lotus-like hierarchically structured Cu surface and the natural lotus leaf.

关键词： Hierarchical structure Wetting state regulation Wetting transition Superhydrophobicity Superhydrophilicity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Circular aperture-array structure optical system for digital sun sensor

引用

Optoelectronics Letters 2008年第1期4卷 62-65页

作者： wen zhi-ming,jiang Jie, ZHANG Guang-jun,and FAN Qiao-yun Key Laboratory for Precision Opto-mechatronic. Techonology of Ministry of Education ,Beijing University of Aeronautics and Astronautics, Beijing 100083,China Key Laboratory for Precision Opto-mechatronic. Techonology of Ministry of Education Beijing University of Aeronauticsand Astronautics Beijing 100083China

Based on the first type of Rayleigh Sommerfeld diffraction formula, an imaging model of circular aperture-array structure digital sun sensor optical system is developed. Then a 6×6 circular aperture-array structure optical system is designed. The results of numerical simulation show that the optical system is designed well and is conformed to the requirements of miniaturization and high accuracy of sun sensor.

关键词：数字太阳传感器圆孔结构光学系统光衍射角度测量

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Charge regulation by ferromagnetic metal/LiF spin-polarized interface for high-performance Li metal anodes

引用

Rare Metals 2024年第3期43卷 995-1005页

作者： Ming-Yang Feng Shuang Zhou Yi-Fang Zhang Ya-Ping Wang Chun-Yan Fu Jian-wen Li Yuan-Lang Wan zhi-Jia Zhang Yong jiang An-Qiang Pan State Key Laboratory of Powder Metallurgy School of Materials Science and EngineeringCentral South UniversityChangsha410083China State Key Laboratory of Separation Membranes and Membrane Processes Tianjin Key Laboratory of Advanced Fibers and Energy StorageSchool of Material Science and EngineeringTiangong UniversityTianjin300387China School of Materials Science and Engineering Hebei University of TechnologyTianjin300130China

The interfacial characteristics of the Li metal anode(LMA)play a crucial role in its overall *** various materials being applied to modify the interface,a comprehensive understanding of their specific mechanisms remains to be ***,we have prepared carbon cloth(CC)frameworks with their surfaces modified using ferromagnetic metal/LiF heterogeneous films(T^(M)-LiF-CC)as the substrate for LMA,which exhibit superior electrochemical *** ferromagnetic Co as a representative example,our study demonstrates that the enhanced performance of Co-LiF-CC,compared to bare CC,is attributed to the spinpolarized interface contributed by the Co/LiF *** and LiF play individual roles in redistributing electrons and Li^(+)to promote homogeneous Li *** nanoparticles play a crucial role in generating strong surface capacitance by storing electrons in spin-split bands,while LiF,with low surface diffusion barriers,ensures fast transportation of Li^(+).The Co-LiF-CC@Li electrodes deliver long lives of 7400 and 3600 h at 1 and 2 mA·cm^(-2)in symmetric cells,respectively;moreover,they enable full batteries with high and durable capacities,particularly when the N/P ratios are low(3.3 or even 1.7).

关键词： Lithium metal anode Interfacial charge Ferromagnetic metal Lithium fluoride Spin polarization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Self-assembly Induced by Complexation of Diblock Copolyelectrolytes and Oppositely Charged Homopolymers

引用

Chinese Journal of Polymer Science 2024年第9期42卷 1321-1332,I0006页

作者： Ling Zhao zhi-Yuan Yin Jia-Di jiang Er-Qiang Chen Shuang Yang Beijing National Laboratory for Molecular Sciences Key Laboratory of Polymer Chemistry and Physics of Ministry of EducationCenter for Soft Mater Science and EngineeringCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing100871China Beijing National Laboratory for Molecular Sciences College of Chemistry and Molecular EngineeringPeking UniversityBeijing100871China

We investigate the solution self-assembly of a mixture of positively charged homopolymers and AB diblock copolymers,in which the A blocks are negatively charged,and the B blocks are *** electrostatic complexation between oppositely charged polymers drives the formation of many ordered *** microstructures and phase diagrams are calculated using self-consistent field theory(SCFT)based on an ion-pair model with an equilibrium constant K to characterize the strength of binding between positively and negatively charged *** effects of the charge ratio,representing the ratio of charges from the homopolymer over all charges from polymers in the system,on the ordered structure are systematically studied,both for hydrophobic and hydrophilic A *** charge ratio plays an important role in determining the phase boundaries in the phase diagram of salt concentration versus polymer *** also provide information about the varying tendency of the domain spacing and core size of the spherical phase when the charge ratio is changed,and the results are in good agreement with *** studies provide a deep understanding of the self-assembled microstructures of oppositely charged diblock copolymer-homopolymer systems.

关键词： Self-assembly Polyelectrolyte complexation Self-consistent field theory Ion-pair

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Determinants of saturation magnetic flux density in Fe-based metallic glasses: insights from machine-learning models

引用

Rare Metals 2024年第10期43卷 5256-5267页

作者： Jie Xiong Bo-wen Bai Hao-Ran jiang Angeles Faus-Golfe Materials Genome Institute Shanghai University Institute of Special Environments Physical Sciences Harbin Institute of Technology Laboratoire de Physique des 2 Infinis Irene Joliot-Curie (IJCLab) CNRS-IN2P3Universite′Paris-Saclay

Fe-based metallic glasses have garnered significant attention due to their low coercivity force and core loss. Enhancing the saturation magnetic flux density(Bs) of Fe-based metallic glasses is crucial for their industry applications. This work constructed a dataset comprising330 training data and 157 test data. The support vector regression model surpassed the tree-based ensemble models in the test set and demonstrated comparable accuracy to the tree-based ensemble models in the training set. Additionally, we proposed an indicator for Bsbased on symbolic regression. This newly proposed indicator exhibits a Pearson correlation coefficient exceeding 0.92 with Bs. The present work provides a simple and accurate formula for predicting the Bsof Fe-based amorphous alloys, demonstrating the effectiveness of machine learning approaches in discovering novel soft magnetic materials.

关键词： Fe-based metallic glasses Machine learning Saturation magnetic flux density Symbolic regression

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A novel method for modeling the phase change of iron ore particles in the cohesive zone of a blast furnace

引用

Particuology 2024年第3期86卷 252-261页

作者： Dianyu E Yingming wen Jiayun Dan Youyuan jiang Guangchao Wei Jiaxin Cui jiangxi Provincial Key Laboratory for Simulation and Modelling of Particulate Systems Jiangxi University of Science and TechnologyNanchang330013China International Institute for Innovation Jiangxi University of Science and TechnologyNanchang330013China Ironmaking Plant Xiangtan Iron and Steel Corporation of Hunan HualingXiangtan411101China Schoolof Transportation and Vehicle Enginering Shandong University of TechnologyZibo255000China

Cohesive zone plays a vital role in the stable operation of a blast furnace(BF),yet the complex phase change process of iron ore particles in this zone is still not well *** this study,a novel one-dimensional(1D)unsteady phase change model was developed to elucidate the heat transfer and melting mechanisms of iron ore *** model validation,the effects of several key operating parameters(e.g.,particle diameter,gas velocity,initial temperature)on the phase change behavior of iron ore particles were analyzed,and the joint effect of multiple parameters was *** results show that larger-sized iron ore particles possess lower specific surface areas,which in turn reduces their convective heat absorption ***,the distance from the solid-liquid phase interface to the particle surface increases,thereby slowing down the movement of the phase interface and pro-longing the melting duration of the *** the gas velocity and the initial temperature does not have a significant impact on reducing the duration of the complete melting *** the specified conditions,it is observed that increasing the gas velocity by 3-fold and 9-fold results in a reduction of the melting duration by 2.4%and 8.3%,*** the initial temperature of iron ore particles results in a decrease in the core-to-surface temperature difference,a slower heating rate,and a shorter duration to achieve *** the factors affecting the melting process,the particle diameter is found to be the most significant in terms of the liquid phase precipitation,mushy zone thickness,and core-to-surface temperature difference of iron ore particles.

关键词： Blast furnace Iron ore melting Cohesive zone Heat transfer Phase change

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：