检索结果-南通市图书馆

Ultrahard X-ray multifunctional application beamline at the SSRF

Nuclear Science and Techniques 2024年第6期35卷 14-25页

作者： Ke Yang zhao-hui dong Chun-Yin Zhou Zi-Long zhao dong-Xu Liang Sai-Chao Cao Ai-Guo Li Shanghai Advanced Research Institute Chinese Academy of SciencesShanghai 201210China

The ultrahard X-ray multifunctional application beamline(BL12SW)is a phase-II beamline project at the Shanghai Syn-chrotron Radiation *** primary X-ray techniques used at the beamline are high-energy X-ray diffraction and imaging using white and monochromatic *** main scientific objectives of ultrahard X-ray beamlines are focused on two research *** is the study of the structural properties of Earth’s interior and new materials under extreme high-temperature and high-pressure conditions,and the other is the characterization of materials and processes in near-real service *** beamline utilizes a superconducting wiggler as the light source,with two diamond windows and SiC discs to filter out low-energy light(primarily below 30 keV)and a Cu filter assembly to control the thermal load entering the subsequent optical *** beamline is equipped with dual *** first was a meridional bending Laue monochromator cooled by liquid nitrogen,achieving a full-energy coverage of 30-162 *** second was a sagittal bending Laue monochromator installed in an external building,providing a focused beam in the horizontal direction with an energy range of 60-120 *** were four experimental hutches:two large-volume press experimental hutches(LVP1 and LVP2)and two engineering material experimental hutches(ENG1 and ENG2).Each hutch was equipped with various near-real service conditions to satisfy different *** example,LVP1 and LVP2 were equipped with a 200-ton DDIA press and a 2000-ton dual-mode(DDIA and Kawai)press,***1 and ENG2 provide in situ tensile,creep,and fatigue tests as well as high-temperature *** June 2023,the BL12SW has been in trial *** is expected to officially open to users by early 2024.

关键词： Shanghai Synchrotron Radiation Facility Ultrahard X-ray High energy diffraction High energy imaging Engineering materials Earth science

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

急性脑梗死患者血清膜联蛋白A2和miR-9-5p的表达及其与病情严重程度的相关性

引用

临床和实验医学杂志 2024年第13期23卷 1353-1356页

作者：王楠赵东慧刘彦佐佳木斯市中心医院神经内科黑龙江佳木斯154002 佳木斯市中心医院营养科黑龙江佳木斯154002

目的观察急性脑梗死患者血清膜联蛋白A2、微RNA(miR)-9-5p的表达及其与病情严重程度的相关性。方法回顾性选取2022年1月至2023年7月佳木斯市中心医院收治的急性脑梗死患者80例,将其列为观察组;并选择同一时期体检中心接待的健康者80名... 详细信息

目的观察急性脑梗死患者血清膜联蛋白A2、微RNA(miR)-9-5p的表达及其与病情严重程度的相关性。方法回顾性选取2022年1月至2023年7月佳木斯市中心医院收治的急性脑梗死患者80例,将其列为观察组;并选择同一时期体检中心接待的健康者80名作为对照组。检测并比较两组研究对象的血清膜联蛋白A2、miR-9-5p表达水平,按照疾病严重程度对观察组患者进行亚组划分,比较各亚组患者的血清膜联蛋白A2、miR-9-5p表达水平,采用Pearson相关性分析分析血清膜联蛋白A2、miR-9-5p的表达与急性脑梗死患者病情严重程度的关系。结果观察组患者的血清膜联蛋白A2表达水平为(42.65±6.12)μg/L,明显高于对照组[(14.29±2.18)μg/L],miR-9-5p表达水平为0.54±0.11,明显低于对照组(1.01±0.02),差异均有统计学意义(P<0.05)。重度组患者血清膜联蛋白A2表达水平为(48.95±2.37)μg/L,显著高于轻度组、中度组[(35.56±1.16)、(41.23±2.39)μg/L],miR-9-5p表达水平为0.46±0.13,显著低于轻度组、中度组(0.72±0.13、0.58±0.12),差异均有统计学意义(P<0.05)。Pearson相关性分析结果显示,血清膜联蛋白A2、miR-9-5p表达水平均与急性脑梗死病情严重程度相关,其中,血清膜联蛋白A2表达水平与美国国立卫生研究院脑卒中量表(NIHSS)评分之间呈正相关(r=0.681,P<0.05),血清miR-9-5p表达水平与NIHSS评分之间呈负相关(r=-0.516,P<0.05)。结论与体检健康者比较,急性脑梗死患者的血清膜联蛋白A2表达水平明显升高,miR-9-5p表达水平明显降低,且血清膜联蛋白A2、miR-9-5p表达水平与急性脑梗死病情严重程度有相关性。临床血清膜联蛋白A2、miR-9-5p表达水平检测有助于急性脑梗死患者病情判定,制定针对性的治疗方案。

关键词：脑梗死膜联蛋白A2 微RNAs 病情严重程度相关性

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Computational fluid dynamics modeling of rapid pyrolysis of solid waste magnesium nitrate hydrate under different injection methods

引用

Chinese Journal of Chemical Engineering 2024年第2期66卷 224-237页

作者： Wenchang Wu Kefan Yu Liang zhao hui dong SEP Key Laboratory of Eco-industry School of MetallurgyNortheastern UniversityShenyang 110819China Liaoning Engineering Research Center of Energy Saving and Green Low Carbon Technology for Process Industry Northeastern UniversityShenyang 110819China

This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical *** model simulates two-phase flow,heat,and mass transfer processes in a pyrolysis furnace to improve the decomposition rate of magnesium *** performance of multi-nozzle and single-nozzle injection methods was evaluated,and the effects of primary and secondary nozzle flow ratios,velocity ratios,and secondary nozzle inclination angles on the decomposition rate were *** indicate that multi-nozzle injection has a higher conversion efficiency and decomposition rate than single-nozzle injection,with a 10.3%higher conversion rate under the design *** decomposition rate is primarily dependent on the average residence time of particles,which can be increased by decreasing flow rate and velocity ratios and increasing the inclination angle of secondary *** optimal parameters are injection flow ratio of 40%,injection velocity ratio of 0.6,and secondary nozzle inclination of 30°,corresponding to a maximum decomposition rate of 99.33%.

关键词： Multi-nozzle Computational fluid dynamics Thermal decomposition reaction Pyrolysis furnace

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Strength and ductility optimization of HPDC AlSi8MgCuZn2 alloys by modifying pre-aging treatment

引用

China Foundry 2024年第4期21卷 343-351页

作者： Yuan-hang Jiang hui-ting Zheng Fei Liu Hai-dong zhao National Engineering Research Center of Near-net Shape Forming for Metallic Materials South China University of TechnologyGuangzhou 510641China

Considering the components produced by high pressure die casting(HPDC)process usually with ultra-large sizes and complex morphologies,high temperature solid solution treatment is not a suitable method to further improve their mechanical *** this study,two-stage aging treatment with different pre-aging times was designed and employed to further improve the mechanical properties of HPDC Al8SiMgCuZn *** characteristics of precipitates were evaluated by a transmission electron microscope(TEM),and the precipitation strengthening mechanism was *** results reveal that the strengthening is mainly contributed by the precipitation ofβ″phase after two-stage aging,and the number density and size of the precipitates are significantly depended on the pre-aging *** number density of precipitates is increased with the pre-aging time prolonged from 0 h to 4 h,and then decreases with the further increase of pre-aging time from 4 h to 6 *** precipitates with the highest density and smallest size are observed after pre-aging for 4 *** pre-aged at 100℃for 4 h and then artificial aged at 200℃for 30 min,the yield strength of 207 MPa,ultimate tensile strength of 325 MPa and elongation of 7.6%are achieved.

关键词： high pressure die cast aluminum alloy microstructural heterogeneity mechanical properties precipitation strengthening two-stage aging

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High‑Entropy Layered Oxide Cathode Enabling High‑Rate for Solid‑State Sodium‑Ion Batteries

引用

Nano-Micro Letters 2024年第1期16卷 160-171页

作者： Tianxun Cai Mingzhi Cai Jinxiao Mu Siwei zhao hui Bi Wei zhao Wujie dong Fuqiang Huang State Key Laboratory of High Performance Ceramics and Superfine Microstructure Shanghai Institute of CeramicsChinese Academy of SciencesShanghai 200050People’s Republic of China State Key Laboratory of Rare Earth Materials Chemistry and Applications College of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871People’s Republic of China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049People’s Republic of China Zhongke Institute of Strategic Emerging Materials Yixing 214213JiangsuPeople’s Republic of China

Na-ion O3-type layered oxides are prospective cathodes for Na-ion batteries due to high energy density and ***,such cathodes usually suffer from phase transitions,sluggish kinetics and air instability,making it difficult to achieve high performance solid-state sodium-ion ***,the high-entropy design and Li doping strategy alleviate lattice stress and enhance ionic conductivity,achieving high-rate performance,air stability and electrochemically thermal stability for Na_(0.95)Li_(0.06)Ni_(0.25)Cu_(0.05)Fe_(0.15)Mn_(0.49)O_(2).This cathode delivers a high reversible capacity(141 mAh g^(−1)at 0.2C),excellent rate capability(111 mAh g^(−1)at 8C,85 mAh g^(−1)even at 20C),and long-term stability(over 85%capacity retention after 1000 cycles),which is attributed to a rapid and reversible O3–P3 phase transition in regions of low voltage and suppresses phase ***,the compound remains unchanged over seven days and keeps thermal stability until 279℃.Remarkably,the polymer solid-state sodium battery assembled by this cathode provides a capacity of 92 mAh g^(−1)at 5C and keeps retention of 96%after 400 *** strategy inspires more rational designs and could be applied to a series of O3 cathodes to improve the performance of solid-state Na-ion batteries.

关键词： High-entropy High-rate performance Li-TM interaction Air stability O3 layered oxide cathode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Super-high bed sintering for iron ores:behaviors,causes and solutions of horizontal segregation on strand

引用

Journal of Iron and Steel Research International 2024年第7期31卷 1590-1596页

作者： Liang-ping Xu hui-bo Liu Zhong-lin dong Qiang Zhong Yu-chao zhao Guang-hui Li School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083HunanChina

Horizontal segregation has been a constraint to the development and application of super-high bed *** eliminate the horizontal segregation of super-high bed sintering,several typical sintering machines were sampled and analyzed,and theoretical calculation was made to compare the bed depth and their differences in different areas within the mixture ***,solutions were proposed and applied to a 265 m^(2) sintering *** results showed that the horizontal seg-regation of the 265 m^(2) sintering machine was dominated by particles larger than 8 mm with horizontal segregation degree of 0.48,while 360 and 550 m^(2) sintering machines were affected by 5-8 mm and 1-3 mm particles with horizontal segregation degree of 0.27 and 0.31,*** analysis indicated the different segregation distribution results from the matching of the bed depth of each area within the mixture ***,the horizontal segregation degree not larger than 0.06 was achieved by optimizing the time parameters and the division of three zones on the 265 m^(2) sintering machine.

关键词： Super-high bed sintering Horizontal segregation Feeder Particle distribution Agglomeration

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fiber Grating Sensor with Enhanced Pressure and Temperature Sensitivity

引用

Chinese Physics Letters 2000年第2期17卷 115-116页

作者： LIU Yun-Qi GUO Zhuan-Yun LIU Zhi-Guo zhao dong-hui GE Chun-Feng dong Xiao-Yi Institute of Modern Optics Nankai UniversityTianjin 300071

A technique is used to enhance the pressure and temperature sensitivity of a fiber Bragg grating *** grating is packaged by using polymer jacket,which exhibits no significant chirp due to the adoption of the special *** measured pressure and temperature sensitivity of the structured grating is 6.28×10^(-5)/MPa and5.18×10^(-5)/℃.The wavelength shift due to pressure and temperature can be enhanced about 31.5 times for pressure and 7.7 times for temperature.

关键词： technique temperature fiber

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography:A review

引用

China Foundry 2024年第5期21卷 427-444页

作者： Hai-dong zhao Xue-ling Wang Qian Wan Wen-hui Bai Fei Liu School of Mechanical and Automotive Engineering South China University of TechnologyGuangzhou 510640China

Al and Mg alloy high pressure die castings(HPDC)are increasingly used in automotive *** microstructures in the castings have decisive effect on the casting mechanical properties,in which the microstructure characteristics are fundamental for the investigation of the microstructure-property *** the past decade,the microstructure characteristics of HPDC Al and Mg alloys,especially micro-pores andα-Fe,have been investigated from two-dimensional(2D)to threedimensional with X-ray micro-computed tomography(μ-CT).This paper provides an overview of the current understanding regarding the 3D characteristics and formation mechanisms of microstructures in HPDC alloys,their spatial distributions,and the impact on mechanical ***,it outlines future research directions for the formation and control of heterogeneous microstructures in HPDC alloys.

关键词： high pressure die casting microstructure three-dimensional characteristics distribution Al and Mg alloys

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Natural products inspired[3+2]cycloaddition enables efficient construction of hydroxylated tetrahydrofuran acetals and concise syntheses of lignans

引用

Science China Chemistry 2024年第7期67卷 2306-2313页

作者： dong-Yue Cai Weiming Shi zhao-hui Jin Zhi-Xiang Yu Jin-Xin zhao Jian-Min Yue State Key Laboratory of Drug Research Shanghai Institute of Materia MedicaChinese Academy of SciencesShanghai 201203China University of Chinese Academy of Sciences Beijing 100049China Beijing National Laboratory for Molecular Sciences(BNLMS) Key Laboratory of Bioorganic Chemistry and Molecular Engineering of Ministry of EducationCollege of ChemistryPeking UniversityBeijing 100871China

Mimicking biosynthetic pathways of hongkonoids led to the development of a new Cu(Ⅰ)-catalyzed[3+2]cycloaddition ofα-hydroxyketone andβ-keto enol ethers,affording tetrahydrofuran acetals in a highly diastereoselective manner and 100%atom *** studies on the mechanism disclosed a concerted but asynchronous Michael addition/aldol *** the same importance,this methodology provides a practical biomimetic approach for one-step construction of the dibenzylbutyrolactol lignan backbone starting from two phenyl propane derivatives,opening up a powerful new approach for lignan synthesis,which is showcased by succinct total syntheses of two biologically important aryltetralin-type lignans,β-apopicropodophyllin and *** the mild and operationally simple conditions,the developed chemistry might have a promising prospect in potential industrial applications.

关键词： [3+2]cycloaddition transition-metal catalysis tetrahydrofuran lignans natural products

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Identification of Motor Nuclei in the Medulla Oblongata of Carp for Biological Control

引用

Journal of Bionic Engineering 2024年第2期21卷 842-851页

作者： Yang zhao Yong Peng Yudong Wen Lingjun Han Yanhong Yan Xueying dong hui Zhang Zheng zhao Xiaoyue Liu School of Electrical Engineering Yanshan UniversityQinhuangdao066004China School of Mechanical Engineering Yanshan UniversityQinhuangdao066004China Key Laboratory of National Defense of Mechanical Structure and Material Science Under Extreme Conditions Yanshan UniversityQinhuangdao066004China Institute of Marine Science and Engineering Yanshan UniversityQinhuangdao066004China Shijiazhuang University Shijiazhuang050035China

Brain-controlled technology is the key technology in biological control,and the corresponding relationship between animal brain nuclei and motor behavior is the *** purpose of this study was to explore the motor nuclei of the medulla oblongata in *** carps were subjected to electrical stimulation and chemical stimulation experiments,respectively,in the water-free state,and the effective chemical stimulation sites were injected with the pontamine sky blue *** brain tissue sections were obtained by paraffin tissue section technology and the neutral red staining *** comparing the positions of the brain nuclei shown in earlier studies,the motor nerve nuclei in the medulla oblongata were *** brain electrode was implanted into the motor nucleus of the medulla oblongata,and the underwater control experiment and behavioral tests were carried out with different electrical stimulation *** results showed that the abducens nucleus(NVI)was the motor nucleus that controls the ipsilateral steering,and the facial nucleus(NVII)was the motor nucleus that controls the forward *** adjusting the stimulation voltage and the stimulation pulse number,the carp can be stably controlled to achieve a left–right steering motion of 30°–180°and a forward motion of more than 80 cm/*** study indicated that the quantitative control of the steering and forward behavior of the carp can be achieved by electrical stimulation of the NVI and NVII,which provided a certain experimental basis for the accurate control of the carp robot.

关键词： Biological control Carp Medulla oblongata motor nucleus Electrical stimulation technique Chemical stimulation technique

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：