检索结果-南通市图书馆

High critical current density in Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12) electrolyte via interfacial engineering with complex hydride

引用

Rare Metals 2024年第2期43卷 692-701页

作者： Ying-tong Lv Teng-Fei Zhang zhao-tong hu Guang-Lin Xia Ze-Ya huang Zhen-hua Liu Li-hua Que Cai-Ting Yuan Fang-Qin Guo Takayuki Ichikawa Xue-Bin Yu College of Materials Science and Technology Nanjing University of Aeronautics and AstronauticsNanjing210016China Centre for Hydrogenergy College of Materials Science and TechnologyNanjing University of Aeronautics and AstronauticsNanjing210016China Department of Materials Science Fudan UniversityShanghai200433China Graduate School of Advanced Science and Engineering Hiroshima University1-4-1 KagamiyamaHigashi-Hiroshima739-8527Japan

Garnet-type solid-state batteries(SSBs)are considered to be one of the most promising candidates to realize next-generation lithium metal batteries with high energy density and ***,the dendrite-induced short-circuit and the poor interfacial contact impeded the practical ***,interface engineering to achieve low interfacial resistance without high temperature calcination was developed,which Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)was simply coated with complex hydride(Li_(4)(BH_(4))_(3)I(3L1L))in various mass ratios n(Li_(4)(BH_(4))_(3)I)-(100−n)LLZTO(10≤n≤40).The interfacial conductivity increases by more than three orders of magnitude from 8.29×10^(−6)S·cm^(−1)to 1.10×10^(−2)S·cm^(−1).Symmetric Li cells exhibit a high critical current density(CCD)of 4.0 mA·cm^(−2) and an excellent cycling stability for 200 h at 4.0 mA·cm^(−2).SSBs with polymeric sulfur-polyacrylonitrile(SPAN)cathode achieve a high discharge capacity of 1149 mAh·g^(−1) with a capacity retention of 91%after 100 cycles(0.2 C).This attempt guides a simple yet efficient strategy for obtaining a stable Li/LLZTO interface,which would promote the development of solid-state batteries.

关键词： Hydrides Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO) Critical current density Solid-state electrolytes(SSEs) Lithium-sulfur batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Network Pharmacology and Molecular Docking Analysis of the Mechanisms of Combined Radix Bupleuri(Chai-hu) and Radix Paeoniae Alba(Bai-Shao) Treatment in the Prevention and Treatment of Alzheimer's Disease

引用

World Journal of Traditional Chinese Medicine 2024年第2期10卷 254-262页

作者： zhao-Han huang Yuan Fang Qi Yu tong Wang College of Traditional Chinese Medicine Beijing University of Chinese MedicineBeijingChina Shanghai Center for Women and Children's Health ShanghaiChina

Objective: Radix Bupleuri and Radix Paeoniae Alba are referred to as Chai-hu and Bai-Shao, respectively, in Chinese. We used molecular docking and network pharmacological approaches to explore the active components of this Chinese herb combination which is commonly used for treating Alzheimer's disease(AD), the Chai-hu and Bai-Shao pair(CBP). Materials and Methods: The active compounds and action targets of Chai-hu and Bai-Shao were identified in the Traditional Chinese Medicine Systems Pharmacology database, and the Therapeutic Target Database, Drug Bank, Gen Cards, Dis Ge NET, and Online Mendelian Inheritance in Man databases were used to identify therapeutic targets in patients with AD. To identify a common target of CBP in the treatment of AD, we used the Metascape tool to perform Gene Ontology function enrichment and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyses. In addition, CBP-AD protein–protein interaction(PPI) and herb-component-target networks were created using Cytoscape 3.8.2. Molecular docking was verified using Auto Dock tools. Results: We identified 20 active compounds of CBP, 202 active targets, 1,323 disease targets, and 117 active compound disease intersection targets;the PPI network showed that the top eight key targets were AKT1, interleukin(IL) 6, JUN, MAPK1, tumor necrosis factor, TP53, vascular endothelial growth factor, and epidermal growth factor. These act mainly on the fluid shear stress, atherosclerosis, IL-17, hypoxia-inducible factor-1, and nonalcoholic fatty liver disease pathways, among others, which control immune inflammation, cell proliferation, and apoptosis. Based on molecular docking results, the active components of CBP bind well to its key targets. Conclusion: Our results indicated that CBP was effective for treating AD by reducing the expression of inflammatory factors, promoting cell proliferation and differentiation, and preventing nerve cell death and anti-neuronal cell apoptosis.

关键词： Alzheimer's disease Bai-Shao Chai-hu molecular docking network pharmacology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Non-radical activation of persulfate with Bi_(2)O_(3)/BiO_(1.3)I_(0.4)for efficient degradation of propranolol under visible light

引用

Journal of Environmental Sciences 2024年第8期142卷 57-68页

作者： Yuehua Deng Qianqian Che Yani Li Jiating Luo Xiang Gao Yan He Yiling Liu tong Liu Xiaolong zhao Xiaobin hu Wei zhao College of Geology and Environment Xi’an University of Science and TechnologyXi’an 710054China Shaanxi Provincial Key Laboratory of Geological Support for Coal Green Exploitation Xi’an 710054China Department of Mechanical Engineering The University of Hong KongHong Kong 999077China School of Life Science Huzhou UniversityHuzhou 313000China School of Materials Engineering Changshu Institute of TechnologyChangshu 215500China

Non-radical activation of persulfate(PS)by photocatalysts is an effective approach for removing organic pollutants from aqueous *** this study,a novel Bi_(2)O_(3)/BiO_(1.3)I_(0.4)heterojunction was synthesized using a facile solvothermal approach and used for the first time for non-radical activation of PS to degrade propranolol(PRO)in the presence of visible *** findings found that the degradation rate of PRO in the Bi_(2)O_(3)/BiO_(1.3)I_(0.4)/PS system was significantly increased from 19%to more than 90%within 90 min compared to the Bi_(2)O_(3)/BiO_(1.3)I_(0.4)*** indicated that the composite system exerted an excellent synergistic effect between the photocatalyst and the persulfate-based *** tests and electron paramagnetic resonance demonstrated that the non-radical pathway with singlet oxygen as the active species played a major role in the photocatalytic *** existence of photo-generated holes during the reaction could also be directly involved in the oxidation of ***,a possible PRO degradation pathway was also ***,the impacts of pH,humic acid and common anions on the PRO degradation by the Bi_(2)O_(3)/BiO_(1.3)I_(0.4)/PS were explored,and the system’s stability and reusability were also *** study exhibits a highly productive catalyst for PS activation via a non-radical pathway and provides a new idea for the degradation of PRO.

关键词： Iodine deficiency Heterojunction Persulfate(PS) Propranolol(PRO) Photocatalytic degradation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advanced oxidation via the synergy of C-defective/C-O band modified ultrathin porous g-C3N4 and PMS for efficient photothermal degradation of bisphenol pollutants and lignin derivatives

引用

Green Energy & Environment 2024年第7期9卷 1159-1170页

作者： Liquan Jing Meng Xie Yuanguo Xu Chun tong Xia Du Heng zhao Na Zhong huaming Li Jinguang hu School of Chemistry and Chemical Engineering Jiangsu University Department of Chemical and Petroleum Engineering University of Calgary School of Pharmacy Jiangsu University School of Material Science & Chemical Engineering Harbin University of Science and Technology Institute for Energy Research Jiangsu University

This work uses thermal polymerization of urea nitrate, oxyacetic acid and urea as the raw material to prepare ultra-thin porous carbon nitride with carbon defects and C-O band（OA-UN-CN）. Density functional theory（DFT） calculations showed OA-UN-CN had narrower band gap,faster electron transport and a new internal construction electric field. Additionally, the prepared OA-UN-CN significantly enhanced photocatalytic activation of peroxymonosulfate（PMS） due to enhanced light absorption performance and faster electron overflow. As the result, the OA-UN-CN/PMS could entirely degrade bisphenol A（BPA） within 30 min, where the photodegradation rate was 81.8 and 7.9 times higher than that of g-C3N4and OA-UN-CN, respectively. Beyond, the OA-UN-CN/PMS could likewise degrade other bisphenol pollutants and sodium lignosulfonate efficiently. We suggested possible photocatalytic degradation pathways accordingly and explored the toxicity of its degradation products. This work provides a new idea on the development of advanced photocatalytic oxidation processes for the treatment of bisphenol pollutants and lignin derivatives, via a metal-free photothermal-catalyst.

关键词： Photothermal-catalytic G-C 3 N 4 Peroxymonosulfate Bisphenol Sodium lignosulfonate

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Study on the mechanism and law of temperature,humidity and moisture content on the mechanical properties of molded fiber products

引用

Journal of Bioresources and Bioproducts 2024年第3期9卷 351-368页

作者： Zhiqiang Fu tong zhao hu Wang Jingyi Wei Haozhe Liu Liying Duan Yan Wang Ruixiang Yan School of Light Industry Science and Engineering Tianjin University of Science and TechnologyTianjin 300457China Department of Transportation and Vehicle Engineering Tangshan UniversityTangshan 063000HebeiChina College of Mechanical Engineering Tianjin University of Science and TechnologyTianjin 300457China

The change of temperature, humidity and moisture content (MC) will lead to the change of mechanical properties of molded fiber products (MFP). However, it is difficult to decouple the effects of temperature, humidity and MC on the mechanical properties of MFP, and predict the mechanical properties of MFP during the use. In this study, the laws and mechanism of mechanical properties of MFP with ambient temperature, humidity and MC were studied. The results showed that the direct effect of temperature (20−70 °C) on mechanical properties of MFP was insignificant, and the mechanical properties of MFP were mainly changed by MC. The MC was related to ambient temperature and humidity, and the relationship between the three could be described by the modified Guggenheim-Anderson-de Boer (GAB) model (20−70 °C and 30 %–90 % relative humidity). With the increase of MC, the elastic modulus and fracture strain was increased and decreased linearly, the yield strength and failure strength were presented GaussAmp laws, and the failure strain was presented asymptotic regressed distribution law. Two fracture modes of MFP, brittle fracture and ductile fracture, were revealed by the scanning electron microscopy of the mesoscopic fiber structure of sugarcane bagasse molded fiber products. The mathematical models and the changes of fiber structure were verified by wheat straw molded fiber products and waste paper molded fiber products. This study was contributed to understand the effects and mechanism of the change of temperature, humidity and MC on the mechanical properties of MFP.

关键词： Temperature Relative humidity Moisture content Molded fiber products Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A whole-net cooperative positioning method based on CDGNSS and inter-vehicle ranging

引用

Chinese Journal of Aeronautics 2024年第2期37卷 401-416页

作者： Shan hu Hongbo zhao Chen ZhuANG School of Electronics and Information Engineering Beihang UniversityBeijing 100191China

Relative positioning is recognized as an important issue for vehicles in urban ***-vehicle Cooperative Positioning(CP)techniques which fuse the Global Navigation Satellite System(GNSS)and inter-vehicle ranging have attracted attention in improving the performance of baseline estimation between ***,current CP methods estimate the baselines separately and ignore the interactions among the positioning information of different *** interactions are called’information coupling’.In this work,we propose a new multivehicle precise CP framework using the coupled information in the network based on the Carrier Differential GNSS(CDGNSS)and inter-vehicle *** demonstrate the benefit of the coupled information by deriving the Cramer-Rao Lower Bound(CRLB)of the float estimation in *** fully use this coupled information,we propose a Whole-Net CP(WN-CP)method which consists of the Whole-Net Extended Kalman Filter(WN-EKF)as the float estimation filter,and the Partial Baseline Fixing(PBF)as the ambiguity resolution *** WN-EKF fuses the measurements of all baselines simultaneously to improve the performance of float estimation,and the PBF strategy fixes the ambiguities of the one baseline to be estimated,instead of full ambiguity resolution,to reduce the computation load of ambiguity *** tests involving four vehicles were conducted in urban *** results show that the proposed WN-CP method can achieve better performance and meanwhile maintain a low computation load compared to the existing methods.

关键词： GNSS Cooperative positioning Baseline Ambiguity resolution Information coupling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Image attention transformer network for indoor 3D object detection

引用

Science China(Technological Sciences) 2024年第7期67卷 2176-2190页

作者： REN KeYan YAN tong hu zhaoXin HAN HongGui ZHANG YunLu Faculty of Information Technology Beijing University of TechnologyBeijing 100124China

Point clouds and RGB images are both critical data for 3D object detection. While recent multi-modal methods combine them directly and show remarkable performances, they ignore the distinct forms of these two types of data. For mitigating the influence of this intrinsic difference on performance, we propose a novel but effective fusion model named LI-Attention model, which takes both RGB features and point cloud features into consideration and assigns a weight to each RGB feature by attention ***, based on the LI-Attention model, we propose a 3D object detection method called image attention transformer network(IAT-Net) specialized for indoor RGB-D scene. Compared with previous work on multi-modal detection, IAT-Net fuses elaborate RGB features from 2D detection results with point cloud features in attention mechanism, meanwhile generates and refines 3D detection results with transformer model. Extensive experiments demonstrate that our approach outperforms stateof-the-art performance on two widely used benchmarks of indoor 3D object detection, SUN RGB-D and NYU Depth V2, while ablation studies have been provided to analyze the effect of each module. And the source code for the proposed IAT-Net is publicly available at https://***/wisper181/IAT-Net.

关键词： 3D object detection transformer attention mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

基于机电建模的加工中心轴间耦合问题

引用

清华大学学报（自然科学版） 2017年第2期57卷 113-119页

作者：赵彤谢溢胡建清华大学机械工程系精密超精密制造装备与控制北京市重点实验室北京100084

加工中心加工精度与其整机结构特性和各轴控制特性密切相关。考虑进给轴间的动态激励响应,研究加工中心整机在特定频率范围内的各向动柔度,对辅助机床设计具有重要意义。该文结合有限元建模和相关实验方法,分析了某双驱进给平台的结构... 详细信息

加工中心加工精度与其整机结构特性和各轴控制特性密切相关。考虑进给轴间的动态激励响应,研究加工中心整机在特定频率范围内的各向动柔度,对辅助机床设计具有重要意义。该文结合有限元建模和相关实验方法,分析了某双驱进给平台的结构动柔度,重点研究其机械系统的轴间耦合问题。提出了一种用传递函数组等效机械结构特性的整机机电联合仿真建模方法,并以此研究了某卧式加工中心机电系统的轴间耦合问题。研究结果表明:当加工中心存在某些模态振型同时影响刀具或工件在多方向的变形时,其机械系统和机电系统的轴间耦合在整机动柔度研究和控制环参数选择时必须予以考虑。

关键词：加工中心轴间耦合有限元建模机电建模

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Three-dimensional limit variation analysis on the ultimate pullout capacity of the anchor cables based on the Hoek-Brown failure criterion

引用

Journal of Mountain Science 2024年第3期21卷 1036-1047页

作者： ZUO Shi zhao Lianheng hu Shihong College of Civil Engineering Changsha UniversityChangsha 410022China hunan Provincial Key Laboratory for Disaster Prevention and Mitigation of Rail Transit Engineering Structure Key Laboratory of Heavy-Haul Railway Engineering StructureMinistry of EducationCentral South UniversityChangsha 410075China College of Civil Engineering Central South UniversityChangsha 410075China

Only simplified two-dimensional model and a single failure mode are adopted to calculate the ultimate pullout capacity(UPC)of anchor cables in most previous *** study focuses on a more comprehensive combination failure mode that consists of bond failure of an anchorage body and failure of an anchored rock *** three-dimensional ultimate pullout capacity of the anchor cables is calculated based on the Hoek-Brown failure criterion and variation analysis *** numerical solution for the curvilinear function in fracture plane is obtained based on the finite difference theory,which more accurately reflects the failure state of the anchor cable,as opposed to that being assumed in *** results reveal that relying solely on a single failure mode for UPC calculations has limitations,as changes in parameter values not only directly impact the UPC value but also can alter the failure model and thus the calculation method.

关键词： Anchor cable Ultimate pullout capacity(UPC) Failure model Variation analysis Hoek-Brown failure criterion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bifunctional passivation by lewis-base molecules for efficient printable mesoscopic perovskite solar cells

引用

Journal of Energy Chemistry 2024年第9期96卷 177-184页

作者： Hang Yang Jianhong zhao Xiaodong Ren tong Zhou Henbing Zhang Weilong Zhang Jin Zhang Guangzhi hu Yuming Zhang Wen-hua Zhang Qingju Liu Yunnan Key Laboratory for Micro/Nano Materials & Technology National Center for International Research on Photoelectric and Energy Materials School of Materials and Energy Yunnan UniversityKunming 650091YunnanChina Institute for Ecological Research and Pollution Control of Plateau Lakes School of Ecology and Environmental Science Yunnan UniversityKunming 650091YunnanChina

Printable mesoscopic perovskite solar cells(PM-PSCs)possess notable merits in terms of cost-effectiveness,easy manufacturing,and large scale ***,the absence of a hole transport layer contributes to the exacerbation of carrier recombination,and the defects between the perovskite and electron transport layer(ETL)interfaces significantly decrease the efficiency of the *** this study,a bifunctional surface passivation approach is proposed by applying a thioacetamide(TAA)surfactant on the mesoporous TiO_(2)*** results demonstrate that TAA molecules could interact with TiO_(2),thereby diminishing the oxygen vacancy ***,the amino group and sulfur atoms in TAA molecules act as Lewis base to effectively passivate the uncoordinated Pb^(2+)in perovskite and improve the morphology of perovskite,and decrease the trap-state density of *** TAA passivation mechanism improves the alignment of energy levels between TiO_(2)and perovskite,facilitating electron transport and reducing carrier ***,the TAA-passivated device achieved a champion power conversion efficiency(PCE)of 17.86%with a high fill factor(FF)of 79.16%and an open-circuit voltage(V_(OC))of 0.971 *** investigation presents a feasible strategy for interfacial passivation of the ETL to further improve the efficiency of PM-PSCs.

关键词： Perovskite solarcells Carbon electrode Thioacetamide Interfacial passivation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：