检索结果-南通市图书馆

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

引用

journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.Y.huang z.Yang S.Y.Yang z.h.Dai Y.j.Liu j.h.Liao G.Y.zhong z.j.Xie Y.P.Fang S.S.zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure heterostructure Photothermal effect Photocatalyst hydrogen evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Precipitation of multi-type nano-quasicrystals in a Mg-zn-Y alloy

引用

journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.z.Wang X.z.zhou L.F.zhang h.Q.Ye z.Q.Yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China ji hua Laboratory Foshan 528251China Foshan University Foshan 528231China

Mg-6zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： Quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rational design of AgGaS/znS/znS quantum dots with a near-unity photoluminescence quantum yield via double shelling scheme

引用

journal of Materials Science & Technology 2024年第2期169卷 235-242页

作者： h.X.Lu h.Liu z.z.Fu Y.Y.Chen h.Q.Dai z.hu W.L.zhang R.Q.Guo Institute for Electric Light Sources School of Information Science and TechnologyFudan UniversityShanghai 200433China Institute of Future Lighting Academy for Engineering and TechnologyFudan UniversityShanghai 200433China Yiwu Research Institute of Fudan University YiwuZhejiang 322000China zhongshan-Fudan joint Innovation Center Zhongshan 528437China

In this study,a two-step method was used to synthesize highly luminescent AgGaS/znS/znS quantum dots(QDs).In the first step,an inner znS shell was formed via a one-pot method,which resulted in a smaller lattice mismatch between the AgGaS core and the outer znS shell,thereby facilitating the formation of a thick outer *** the two-step shelling process,the synthesized AgGaS/znS/znS QDs showed an excellent photoluminescence quantum yield(PLQY)of 96.4%with a peak wavelength of 508 nm,repre-senting the highest PLQY reported thus far for AgGaS ***,the effect of halogen ions in zn precursors on the shelling process was *** was proposed that the capacity of halogen ions to coordinate with the QDs influenced the balance between zn cation diffusion and znS shelling ***,the znS shelling reaction was dominant when znCl_(2)was employed,while zn cation diffusion was the dominant process under the I^(−)-rich *** work provides insights into the interfacial restructuring during the znS shelling and offers a clear map for the tailored synthesis of core/shell QDs.

关键词： AgGaS Quantum dots Photoluminescence Core/shell Alloyed core/shell interface

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

引用

journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.h.zhang h.Li z.W.Yang X.Liu Q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of high-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

引用

journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang C.j.Wang W.V.Yue z.j.zhang z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： j.X.Cai B.M.Shi N.Li Y.Liu z.G.zhang Y.N.zan Q.z.Wang B.L.Xiao z.Y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites high-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Reconcile the contradictory wettability requirements for the reduction and oxidation half-reactions in overall CO_(2) photoreduction via alternately hydrophobic surfaces

引用

journal of Energy Chemistry 2024年第6期93卷 202-212,I0006页

作者： hailing huo Ting hu Chengxi huang Fang Wu Tongyu Wang Xuan Liu Liang zhang Qiang ju zhiqing zhong hongbin Xing Erjun Kan ang Li MIIT Key Laboratory of Semiconductor Microstructure and Quantum Sensing Nanjing University of Science and TechnologyNanjing 210094JiangsuChina College of Information Science and Technology Nanjing Forestry UniversityNanjing 210037JiangsuChina

The overall photocatalytic CO_(2) reduction reaction(OPCRR)that can directly convert CO_(2) and h_(2)O into fuels represents a promising renewable energy conversion *** a typical redox reaction,the OPCRR involves two half-reactions:the CO_(2) reduction half-reaction(CRhR)and the water oxidation half-reaction(WOhR).Generally,both half-reactions can be promoted by adjusting the wettability of ***,there is a contradiction in wettability requirements for the two ***,CRhR prefers a hydrophobic surface that can accumulate more CO_(2) molecules on the active sites,ensuring the appropriate ratio of gas-phase(CO_(2))to liquid-phase(h_(2)O)***,the WOhR prefers a hydrophilic surface that can promote the departure of the gaseous product(O_(2))from the catalyst surface,preventing isolation between active sites and the reactant(h_(2)O).here,we successfully reconciled the contradictory wettability requirements for the CRhR and WOhR by creating an alternately hydrophobic *** was achieved through a selectively hydrophobic modification method and a charge-transfer-control ***,the collaboratively promoted CRhR and WOhR led to a significantly enhanced OPCRR with a solar-to-fuel conversion efficiency of 0.186%.Notably,in ethanol production,the catalyst exhibited a 10.64-fold increase in generation rate(271.44μmol g^(-1)h~(-1))and a 4-fold increase in selectivity(55.77%)compared to the benchmark *** innovative approach holds great potential for application in universal overall reactions involving gas participation.

关键词： hydrophobic hydrophilic Gas transport Overall CO_(2)photoreduction z-scheme

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

引用

journal of Magnesium and Alloys 2024年第1期12卷 332-344页

作者： z.Y.Xue X.j.Li j.h.Chu M.M.Li D.N.zou L.B.Tong School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

关键词： Mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surface engineering with ionic polymers on membranes for boron removal

引用

Frontiers of Chemical Science and Engineering 2024年第5期18卷 61-69页

作者： Xiting zhang Chenyi Fang j Paul Chen Sui zhang Department of Chemical and Biomolecular Engineering National University of SingaporeSingapore 117576Singapore Department of Civil and Environmental Engineering National University of SingaporeSingapore 119260Singapore College of Chemistry and Environmental Engineering Shenzhen UniversityShenzhen 518060China

Removal of boric acid from seawater and wastewater using reverse osmosis membrane technologies is imperative and yet remains inadequately addressed by current commercial *** research efforts performed post-modification of reverse osmosis membranes to enhance boron rejection,which is usually accompanied by substantial sacrifice in water *** study delves into the surface engineering of low-pressure reverse osmosis membranes,aiming to elevate boron removal efficiency while maintaining optimal salt rejection and water *** were modified by the self-polymerization and co-deposition of dopamine and polystyrene sulfonate at varying ratios and *** surfaces became smoother and more hydrophilic after *** optimum membrane exhibited a water permeability of 9.2±0.1 L·m^(-2)·h^(-1)·bar^(-1),NaCl rejection of 95.8%±0.3%,and boron rejection of 49.7%±0.1% and 99.6%±0.3% at neutral and alkaline ph,*** water permeability is reduced by less than 15%,while the boron rejection is 3.7 times higher compared to the blank *** research provides a promising avenue for enhancing boron removal in reverse osmosis membranes and addressing water quality concerns in the desalination process.

关键词： membrane low-pressure reverse osmosis boron surface engineering

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

STCF conceptual design report (Volume 1): Physics & detector

引用

Frontiers of physics 2024年第1期19卷 1-154页

作者： M.Achasov X.C.Ai L.P.An R.Aliberti Q.An X.z.Bai Y.Bai O.Bakina A.Barnyakov V.Blinov V.Bobrovnikov D.Bodrov A.Bogomyagkov A.Bondar I.Boyko z.h.Bu F.M.Cai h.Cai j.j.Cao Q.h.Cao X.Cao z.Cao Q.Chang K.T.Chao D.Y.Chen h.Chen h.X.Chen j.F.Chen K.Chen L.L.Chen P.Chen S.L.Chen S.M.Chen S.Chen S.P.Chen W.Chen X.Chen X.F.Chen X.R.Chen Y.Chen Y.Q.Chen h.Y.Cheng j.Cheng S.Cheng T.G.Cheng j.P.Dai L.Y.Dai X.C.Dai D.Dedovich A.Denig I.Denisenko j.M.Dias D.z.Ding L.Y.Dong W.h.Dong V.Druzhinin D.S.Du Y.j.Du z.G.Du L.M.Duan D.Epifanov Y.L.Fan S.S.Fang z.j.Fang G.Fedotovich C.Q.Feng X.Feng Y.T.Feng j.L.Fu j.Gao Y.N.Gao P.S.Ge C.Q.Geng L.S.Geng A.Gilman L.Gong T.Gong B.Gou W.Gradl j.L.Gu A.Guevara L.C.Gui A.Q.Guo F.K.Guo j.C.Guo j.Guo Y.P.Guo z.h.Guo A.Guskov K.L.han L.han M.han X.Q.hao j.B.he S.Q.he X.G.he Y.L.he z.B.he z.X.heng B.L.hou T.j.hou Y.R.hou C.Y.hu h.M.hu K.hu R.j.hu W.h.hu X.h.hu Y.C.hu j.hua G.S.huang j.S.huang M.huang Q.Y.huang W.Q.huang X.T.huang X.j.huang Y.B.huang Y.S.huang N.hüsken V.Ivanov Q.P.ji j.j.jia S.jia z.K.jia h.B.jiang j.jiang S.z.jiang j.B.jiao z.jiao h.j.jing X.L.Kang X.S.Kang B.C.Ke M.Kenzie A.Khoukaz I.Koop E.Kravchenko A.Kuzmin Y.Lei E.Levichev C.h.Li C.Li D.Y.Li F.Li G.Li G.Li h.B.Li h.Li h.N.Li h.j.Li h.L.Li j.M.Li j.Li L.Li L.Li L.Y.Li N.Li P.R.Li R.h.Li S.Li T.Li W.j.Li X.Li X.h.Li X.Q.Li X.h.Li Y.Li Y.Y.Li z.j.Li h.Liang j.h.Liang Y.T.Liang G.R.Liao L.z.Liao Y.Liao C.X.Lin D.X.Lin X.S.Lin B.j.Liu C.W.Liu D.Liu F.Liu G.M.Liu h.B.Liu j.Liu j.j.Liu j.B.Liu K.Liu K.Y.Liu K.Liu L.Liu Q.Liu S.B.Liu T.Liu X.Liu Y.W.Liu Y.Liu Y.L.Liu z.Q.Liu z.Y.Liu z.W.Liu I.Logashenko Y.Long C.G.Lu j.X.Lu N.Lu Q.F.Lü Y.Lu Y.Lu z.Lu P.Lukin F.j.Luo T.Luo X.F.Luo Y.h.Luo h.j.Lyu X.R.Lyu j.P.Ma P.Ma Y.Ma Y.M.Ma F.Maas S.Malde D.Matvienko z.X.Meng R.Mitchell A.Nefediev Y.Nefedov S.L.Olsen Q.Ouyang P.Pakhlov G.Pakhlova X.Pan Y.Pan E.Passemar Y.P.Pei h.P.Peng L.Peng X.Y.Peng X.j.Peng K.Peters S.Pivovarov E.Pyata B.B.Qi Y.Q.Qi W.B.Qian Y.Qian C.F.Qiao j.j.Qin j.j.Qin L.Q.Qin X.S.Qin T.L.Qiu j.Rademacker C.F.Redmer h.Y.Sang Anhui University Hefei 230039China Beihang University Beijing 100191China Budker Institute of Nuclear Physics Novosibirsk 630090Russia CAS Key Laboratory of Theoretical Physics Institute of Theoretical PhysicsChinese Academy of SciencesBeijing 100190China Cavendish Laboratory University of CambridgeJJ Thomson AveCambridge CB30HEUnited Kingdom Central China Normal University Wuhan 430079China Central South University Changsha 410083China China University of Geosciences Wuhan 430074China China University of Mining and Technology Xuzhou 221116China École Polytechnique Fédérale de Lausanne(EPFL) LausanneSwitzerland Fudan University Shanghai 200433China Goethe University Frankfurt D-60325 Frankfurt am MainGermany Guangxi Normal University Guilin 541004China Guangxi Uninversity Nanning 530004China hangzhou Institute for Advanced Study UCASHangzhou 310024China hebei Normal University Shijiazhuang 050024China hebei University Baoding 071002China hefei University of Technology Hefei 230601China helmholtz Institute Mainz Staudinger Weg 18D-55099 MainzGermany henan Normal University Xinxiang 453007China henan University Kaifeng 475004China high Energy Physics Center Chung-Ang UniversitySeoul 06974Korea higher School of Economy 11 Pokrovsky Bulvar Moscow 109028Russia huangshan University Huangshan 245000China hubei University of Automotive Technology Shiyan 442002China hunan Normal University Changsha 410081China hunan University of Science and Technology Xiangtan 411201China hunan University Changsha 410082China Indiana University BloomingtonIndiana 47405USA Inner Mongolia University Hohhot 010021China Institute of Advanced Science Facilities Shenzhen 518107China Institute of high Energy Physics Chinese Academy of SciencesBeijing 100049China Institute of Modern Physics Chinese Academy of SciencesLanzhou 730000China Institute of Physics Academia SinicaTaipeiTaiwan 11529China Institute of Theoretical Physics Chinese Academy of SciencesBeijing 100190China jilin University Changch

The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics *** is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or *** STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard *** STCF project in China is under development with an extensive R&D *** document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.

关键词： electron–positron collider tau-charm region high luminosity STCF detector conceptual design

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：