检索结果-南通市图书馆

Comparative Study on Different Methods for Prediction of Thermal Insulation Performance of Thermal Barrier Coating Used on Turbine Blades

引用

j.urnal of Thermal Science 2024年第1期33卷 172-189页

作者： zhang Zhixin ZENG Wu zhang Xiaodong ZENG Yuntao Advanced Gas Turbine Laboratory Institute of Engineering ThermophysicsChinese Academy of SciencesBeijing 100190China Key Laboratory of Advanced Energy and Power Institute of Engineering ThermophysicsChinese Academy of SciencesBeijing 100190China Innovation Academy for Light-duty Gas Turbine Chinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China

As turbine inlet temperature gets higher and higher,thermal barrier coating(TBC) is more and more widely used in turbine *** turbine blades with TBC,it is of great significance to evaluate the temperature distribution of its substrate metal quickly and accurately,especially during the design *** different degrees of simplification such as whether to consider the change of the geometric size of the fluid domain by TBC and whether to consider the planar heat conduction in TBC,three different methods used in conj.gate heat transfer(CHT) simulation to model the TBC of the turbine blades have been developed and widely used by ***,little research has been conducted to investigate the influence of the three methods on the temperature distribution of turbine *** fill this gap,three geometric models were *** are a solid conduction model with a substrate metal layer and a TBC layer,a transonic turbine vane with internal cooling and TBC,and a plate cylindrical film hole cooling model with *** methods were used in these geometric models and their differences were carefully analyzed and *** result shows that for the conduction model used in this paper,with the same TBC surface temperature distribution,the difference between the three methods is very small and can be *** a transonic turbine vane with internal cooling,regarding the local maximum temperature of the substrate-TBC interface,the largest difference between the method in which TBC is considered as a thermal resistance or a virtual layer of cells and the method in which three-dimensional heat conduction equation of TBC is solved occurs at the trailing *** difference near the leading edge is below *** employed to the film cooling model,the difference of the laterally averaged temperature of the substrate-TBC interface can be 8 K which is mainly due to the change of the length to diameter ratio of the film cooling hole by *** the substrate

关键词： turbine blade thermal barrier coating conj.gate heat transfer film cooling hole

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sequential good lattice point sets for computer experiments

引用

Science China Mathematics 2024年第9期67卷 2153-2170页

作者： Xue-Ru zhang Yong-Dao Zhou Min-Qian Liu Dennis K.j.Lin NITFID LPMC&KLMDASRSchool of Statistics and Data ScienceNankai UniversityTianjin 300071China Department of Statistics Purdue UniversityWest LafayetteIN 47907USA

Sequential Latin hypercube designs(SLHDs) have recently received great attention for computer experiments, with much of the research restricted to invariant spaces. The related systematic construction methods are inflexible, and algorithmic methods are ineffective for large designs. For designs in contracting spaces, systematic construction methods have not been investigated yet. This paper proposes a new method for constructing SLHDs via good lattice point sets in various experimental spaces. These designs are called sequential good lattice point(SGLP) sets. Moreover, we provide efficient approaches for identifying the(nearly)optimal SGLP sets under a given criterion. Combining the linear level permutation technique, we obtain a class of asymptotically optimal SLHDs in invariant spaces, where the L1-distance in each stage is either optimal or asymptotically optimal. Numerical results demonstrate that the SGLP set has a better space-filling property than the existing SLHDs in invariant spaces. It is also shown that SGLP sets have less computational complexity and more adaptability.

关键词： contracting space maximin distance nested Latin hypercube design sequential design space-fillingdesign

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

引用

j.urnal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang C.j.Wang W.V.Yue Z.j.zhang Z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration inj.ction with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

AIMP2 restricts EV71 replication by recruiting SMURF2 to promote the degradation of 3D polymerase

引用

Virologica Sinica 2024年第4期39卷 632-644页

作者： Ren j. Yu L. zhang Q. Ren P. Cai Y. Wang X. Lan K. Wu S. State Key Laboratory of Virology College of Life Sciences Wuhan University Wuhan 430072 China Medical Research Institute Wuhan University Wuhan 430072 China Taikang Center for Life and Medical Sciences Wuhan University Wuhan 430072 China

Hand, foot and mouth disease (HFMD), mainly caused by enterovirus 71 (EV71), has frequently occurred in the Asia-Pacific region, posing a significant threat to the health of infants and young children. Therefore, research on the infection mechanism and pathogenicity of enteroviruses is increasingly becoming important. The 3D polymerase, as the most critical RNA-dependent RNA polymerase (RdRp) for EV71 replication, is widely targeted to inhibit EV71 infection. In this study, we identified a novel host protein, AIMP2, capable of binding to 3D polymerase and inhibiting EV71 infection. Subsequent investigations revealed that AIMP2 recruits the E3 ligase SMURF2, which mediates the polyubiquitination and degradation of 3D polymerase. Furthermore, the antiviral effect of AIMP2 extended to the CVA16 and CVB1 serotypes. Our research has uncovered the dynamic regulatory function of AIMP2 during EV71 infection, revealing a novel antiviral mechanism and providing new insights for the development of antienteroviral therapeutic strategies. © 2024 The Authors

关键词： 3D polymerase AIMP2 E3 ligase SMURF2 Enterovirus 71 (EV71) Ubiquitination

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mechanism of Guangdong Shenqu in regulating intestinal flora in mice with food stagnation and internal heat based on 16S rDNA sequencing

引用

j.urnal of Traditional Chinese Medical Sciences 2024年第2期11卷 232-244页

作者： j.ang Y. zhang Z. Chen H. Wang Y. Xu Y. Chen Z. Wang j. School of Chinese Materia Medica Beijing University of Chinese Medicine Beijing 102488 China Department of Chemistry Cleveland State University Cleveland 44115 United States School of Chinese Traditional Medicine Beijing University of Chinese Medicine Beijing 102488 China

Obj.ctive: To investigate the effect of Guangdong Shenqu (GSQ) on intestinal flora structure in mice with food stagnation through 16S rDNA sequencing. Methods: Mice were randomly assigned to control, model, GSQ low-dose (GSQL), GSQ medium-dose (GSQM), GSQ high-dose (GSQH), and lacidophilin tablets (LAB) groups, with each group containing 10 mice. A food stagnation and internal heat mouse model was established through intragastric administration of a mixture of beeswax and olive oil (1:15). The control group was administered normal saline, and the model group was administered beeswax and olive oil to maintain a state. The GSQL (2 g/kg), GSQM (4 g/kg), GSQH (8 g/kg), and LAB groups (0.625 g/kg) were administered corresponding drugs for 5 d. After administration, 16S rDNA sequencing was performed to assess gut microbiota in mouse fecal samples. Results: The model group exhibited significant intestinal flora changes. Following GSQ administration, the abundance and diversity index of the intestinal flora increased significantly, the number of bacterial species was regulated, and α and β diversity were improved. GSQ administration increased the abundance of probiotics, including Clostridia, Lachnospirales, and Lactobacillus, whereas the abundance of conditional pathogenic bacteria, such as Allobaculum, Erysipelotrichaceae, and Bacteroides decreased. Functional prediction analysis indicated that the pathogenesis of food stagnation and GSQ intervention were primarily associated with carbohydrate, lipid, and amino acid metabolism, among other metabolic pathways. Conclusion: The digestive mechanism of GSQ may be attributed to its role in restoring diversity and abundance within the intestinal flora, thereby improving the composition and structure of the intestinal flora in mice and subsequently influencing the regulation of metabolic pathways. © 2024 Beij.ng University of Chinese Medicine

关键词： Food stagnation Guangdong Shenqu Gut microbiota High-throughput gene sequencing Metabolic pathway Species annotation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Possible γ-Ray Pulsation from PSR j.740-5340B in the Globular Cluster NGC 6397

引用

Research in Astronomy and Astrophysics 2024年第1期24卷 285-291页

作者： j.ao Zheng Pengfei zhang Li zhang Department of Astronomy School of Physics and AstronomyKey Laboratory of Astroparticle Physics of Yunnan ProvinceYunnan UniversityKunming 650091China

Recently, a new radio millisecond pulsar(MSP) j.740-5340B, hosted in the globular cluster(GC) NGC 6397,was reported with a 5.78 ms spin period in an eclipsing binary system with a 1.97 days orbital period. Based on a modified radio ephemeris updated by tool tempo2, we analyze the ~15 yr γ-ray data obtained from the Large Area Telescope on board the Fermi Gamma-ray Space Telescope and detect PSR j.740-5340B's γ-ray pulsation at a confidence level of ~4σ with a weighted H-test value of ~26. By performing a phase-resolved analysis, the γ-ray luminosity in on-pulse interval of PSR j.740-5340B is L_(γ)~ 3.8 × 10^(33) erg s^(-1) using NGC 6397's distance of 2.48 kpc. And γ-rays from the on-pulse part of PSR j.740-5340B contribute ~90% of the total observed γ-ray emissions from NGC 6397. No significant γ-ray pulsation of another MSP j.740-5340A in the GC is *** that the previous four cases of MSPs in GCs, more data in γ-ray, X-ray, and radio are encouraged to finally confirm the γ-ray emissions from MSP j.740-5340B, especially starving for a precise ephemeris.

关键词： gamma-rays:galaxies (stars:)pulsars:individual(PSR j.740-5340B) (Galaxy:)globular clusters:individual(NGC 6397)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Editorial

引用

CCS Chemistry 2024年第5期6卷 266-270页

作者： zhang Xi Minton Donna j 机构不详

“Our responsibility is to do what we can,learn what we can,improve the solutions,and pass them on.”—Richard ***,Nobel Laureate in Physics(1918–1988)With j.nuary behind us,we are well into 2024 and life has fallen back into its familiar *** is resuming,and students and professors alike are back in the lab and *** China,there is buzzing excitement for the Spring Festival and coming of the Year of the Dragon on February *** is said that,“龙行龘龘,前程朤朤”or“The dragon strides forward with determination,and the future is bright.”We have much to look forward to in the coming months.

关键词： has dragon Nobel

来源：

维普期刊数据库

维普期刊数据库更多评论

在线全文

学校读者我要写书评

暂无评论

Study on Soil and Pine-Seedling Zn and Mn and Predicting-Model Design

引用

Pedosphere 1992年第2期2卷 153-160页

作者： zhangj.－ZHEN j.G.j.ER AnhuiAgriculturalCollege Hefei230036（China） DepartmentofScience UniversityofWisconsin－Madison53706（U

Soils were collected from 2-year (2-y) and 3-year (3-y) old red-pine seedling plots in two tree nurseries, Hayward in the north and Wilson in the southwestern part of Wisconsin State respectively, and equilibrated with 0.01 M Ca(NO3)2 for soil solution Zn and Mn (solu-Zn and Mn), and with 0.01 M Ca(NO3)2+0.005 M EDTA for soil adsorbed Zn and Mn (ad-Zn and Mn). Buffering capacity of soil Zn and Mn (b-Zn and Mn) was obtained from the ratio of ad-Zn and Mn to the solu-Zn and Mn. The concerned traces in pine seedling needles (ndls), stems(sts) and roots (rts) were simultaneously measured. The results obtained show that:About 60% of solu- and ad- Zn ranged from 0.2 to 0.4 and from 1 to 2μ/g soil respectively. About 70% of b-Zn was within) *** highest content of solu-Zn compared with the lowest showed a discrepancy of more than 10-fold. The two forms of soil Zn were commonly higher in Wilson than in Hayward *** 80% of solu-, ad- and b-Mn were within 3-10, 5-5.8 μg/ g soil and 1-2 respectively. Influence of low buffering capacity on solu-Zn and Mn was about 20 times stronger than that of the *** E-value, a ratio of accumulated Zn and Mn in needles to those in the soil solution, is proved to be: E-Zn > E-Mn;E-sts> E-ndls or E-rts; and E-2y > *** and/ or linear correlations between soil solu-, ad- and b-Zn and Mn and ndls-, sts-, rts-Zn and Mn were at very significant or significant *** predicting ndls-Zn and Mn, two realizable and simple models from two regression equations were established through the selection of related parameters and dependent variables. Binary regression analysis basically eliminated the influence of soil pH on the prediction of Zn and Mn in needles. Soil pH was thus thought to be excluded from the model.

关键词： manganese predicting model red-pine seedling zinc

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ultrahigh-Pressure Metamorphism of the Sulu Terrane,Eastern China: A Prospective View

引用

Continental Dynamics 1998年第Z1期 34-55页

作者： R. Y. zhang and j. G. LIOU Department of Geological and Environmental Sciences, Stanford University, Stanford, CA 94305

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅＱｉｎｌｉｎｇＤａｂｉｅＳｕｌｕｏｒｏｇｅｎｉｃｂｅｌｔｍａｒｋｓｔｈｅＥＷｔｒｅｎｄｉｎｇｃｏｌｉｓｉｏｎａｌｊｕｎｃｔｉｏｎｂｅｔｗｅｅｎｔｈｅＳｉｎｏＫｏｒｅａｎａｎｄ... 详细信息

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅＱｉｎｌｉｎｇＤａｂｉｅＳｕｌｕｏｒｏｇｅｎｉｃｂｅｌｔｍａｒｋｓｔｈｅＥＷｔｒｅｎｄｉｎｇｃｏｌｉｓｉｏｎａｌｊｕｎｃｔｉｏｎｂｅｔｗｅｅｎｔｈｅＳｉｎｏＫｏｒｅａｎａｎｄＹａｎｇｔｚｅｃｒａｔｏｎｓ，ｗｈ...

关键词： coesite eclogite garnet peridotite fluid/rock interaction ultrahigh P metamorphism Sulu terrane

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Interactive mechanism and friction modelling of transient tribological phenomena in metal forming processes: A review

引用

Friction 2024年第3期12卷 375-395页

作者： Xiao YANG Heli LIU Lemeng zhang Yiran HU Denis j.POLITIS Mohammad M.GHARBI Liliang WANG Department of Mechanical Engineering Imperial College LondonLondon SW72AZUK Department of Mechanical and Manufacturing Engineering University of CyprusNicosia 1678Cyprus Quaker Houghton Deutschland GmbH Dortmund 44319Germany

The accurate representation of tribological boundary conditions at the tool–workpiece interface is crucial for analysis and optimization of formability,material flow,and surface quality of components during metal forming *** has been found that these tribological conditions vary spatially and historically with process parameters and contact *** time-dependent tribological behaviours are also known as transient tribological phenomena,which are widely observed during forming processes and many other manufacturing application ***,constant friction values are usually assigned to represent complex and dynamic interfacial conditions,which would introduce deviations in the relevant *** this paper,transient tribological phenomena and the contemporary understanding of the interaction between friction and wear are reviewed,and it has been found that these phenomena are induced by the transitions of friction mechanisms and highly dependent on complex loading conditions at the *** modelling techniques for transient behaviours for metal forming applications are also *** accurately describe the evolutionary friction values and corresponding wear during forming,the advanced interactive friction modelling has been established for different application scenarios,including lubricated condition,dry sliding condition(metal-on-metal contact),and coated system.

关键词： transient tribological phenomena interactive friction mechanism modelling techniques metal forming

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：