检索结果-南通市图书馆

Microstructure Evolution and Nanomechanical Behavior of Micro-Area in Molten Pool of Selective Laser Melting(CoCrNi)_(82)Al_(9)Ti_(9)High-Entropy Alloy

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1019-1033页

作者： Hong-Wei zhang Li-Wei Lan Zhe-Yu Yang chang-Chun Li Wen-xian Wang College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan030024China Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced MaterialsTaiyuan University of TechnologyTaiyuan030024China Shanxi-Zhejiang University New Materials and Chemical Research Institute Taiyuan030032China

In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were *** HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during *** leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of *** optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 J/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt *** the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al ***,the Ni element content increases significantly outside the melt *** process enhances the phase stability of FCC and facilitates phase ***,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale *** the melt pool,the accumulation of energy results in the formation of coarse ***,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 *** the fracture toughness outside the melt pool also *** with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.

关键词： High-entropy alloys Selective laser melting Microstructure evolution Nanoindentation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stabilization/solidification mechanisms of tin tailings and fuming slag-based geopolymers for different heavy metals

引用

Frontiers of Environmental Science & Engineering 2024年第5期18卷 43-55页

作者： xian Zhou Zhengfu zhang Hui Yang School of Materials Science and Engineering Kunming University of Science and TechnologyKunming650093China Kunming Metallurgical Research Institute Co. Ltd.Kunming650031China

Tin mine tailings(TMT)and fuming slag(FS)contain many heavy metals(As,Cr,Cu,Zn and Mn)that cause severe pollution to the ***,geopolymers were prepared using TMT,FS and flue gas desulfurization gypsum(FGDG)to immobilize heavy metals,and their compressive strength and heavy metal leaching toxicity were *** was first determined that T4F5(TMT:FS=4:5)sample exhibited the highest compressive strength(7.83 MPa).T4F5 achieved 95%immobilization efficiency for As and Cr,and nearly 100%for Cu,Zn and Mn,showing good immobilization performance.A series of characterization analyses showed that heavy metal cations can balance the charge in the geopolymer and replace Al in the geopolymer structure to form covalent *** addition,about 2%–20%of heavy metal Fe was immobilized in hydration products,heavy metal hydroxides and non-bridging Si–O and Al–O coordination with silica-aluminate ***_(3)^(3−) was oxidized into AsO_(4)^(3−),which may form Ca–As or Fe–As ***_(2)O_(7)^(2−)was converted to CrO_(4)^(2−)under alkaline environment and then combined with OH−to form Cr(OH)3 ***^(2+)may react directly with dissolved silicate to form Mn_(2)SiO_(4) and also form Mn(OH)_(2) *** unstable Mn(OH)_(2) can be further oxidized to MnO_(2).The heavy metal cations were immobilized in the silicoaluminate lattice,while the anions tended to form insoluble *** results may benefit the industry and government for better handling of TMT,FS and solid wastes containing the abovementioned five heavy metals.

关键词： Heavy metals Cementitious materials Tin tailings Stabilization/solidification Redox

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Spin direction dependent quantum anomalous Hall effect in two-dimensional ferromagnetic materials

引用

Chinese Physics B 2024年第4期33卷 613-621页

作者：杨宇贤张昌文 School of Physics and Technology University of JinanJinan 250022China

We propose a scheme for realizing the spin direction-dependent quantum anomalous Hall effect(QAHE)driven by spin-orbit couplings(SOC)in two-dimensional(2D)*** on the sp^(3)tight-binding(TB)model,we find that these systems can exhibit a QAHE with out-of-plane and in-plane magnetization for the weak and strong SOC,respectively,in which the mechanism of quantum transition is mainly driven by the band inversion of p_(x,y)/p_(z)*** a concrete example,based on first-principles calculations,we realize a real material of monolayer 1T-SnN_(2)/PbN_(2)exhibiting the QAHE with in-plane/out-of-plane magnetization characterized by the nonzero Chern number C and topological edge *** findings provide useful guidance for the pursuit of a spin direction-dependent QAHE and hence stimulate immediate experimental interest.

关键词： topological phase transition quantum anomalous Hall effect first-principles calculations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Limit Theorems for Critical Galton-Watson Processes with Immigration Stopped at Zero

引用

Acta Mathematica Sinica,English Series 2024年第2期40卷 435-450页

作者： Dou Dou LI Mei zhang xian Yu zhang College of Statistics and Data Science Faculty of ScienceBeijing University of TechnologyBeijing 100124P.R.China Laboratory of Mathematics and Complex Systems(Ministry of Education) School of Mathematical SciencesBeijing Normal UniversityBeijing 100875P.R.China

In this paper,we consider a critical Galton-Watson branching process with immigration stopped at zero *** precise estimation on the probability generating function of the n-th population are obtained,and the tail prob... 详细信息

关键词： Branching immigration critical life period limit theorems

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical study of compression corner flowfield using Gao-Yong turbulence model

引用

航空动力学报 2012年第1期27卷 124-128页

作者： GAO Ge zhang chang-xian YAN Wen-hui WANG Yong National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics School of Jet PropulsionBeijing University of Aeronautics and AstronauticsBeijing 100091China Chinese Aeronautical Establishment Beijing 100012China

A numerical simulation of shock wave turbulent boundary layer interaction induced by a 24° compression corner based on Gao-Yong compressible turbulence model was *** convection terms and the diffusion terms were calculated using the second-order AUSM(advection upstream splitting method) scheme and the second-order central difference scheme,*** Runge-Kutta time marching method was employed to solve the governing equations for steady state *** flow separation-region which indicates highly non-isotropic turbulence structure has been found in the present work due to intensity interaction under the 24° compression *** between the calculated results and experimental data have been carried out,including surface pressure distribution,boundary-layer static pressure profiles and mean velocity *** numerical results agree well with the experimental values,which indicate Gao-Yong compressible turbulence model is suitable for the prediction of shock wave turbulent boundary layer interaction in two-dimensional compression corner flows.

关键词： shock wave turbulent boundary layer interaction Gao-Yong compressible turbulence model compression corner flow

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hybrid vibration isolation optimization of a flexible manipulator based on neural network agent model

引用

Chinese Journal of Aeronautics 2024年第5期37卷 482-505页

作者： Yongxin zhang Liang LI Dingguo zhang Wei-Hsin LIAO xian GUO School of Science Nanjing University of Science and TechnologyNanjing 210094China Department of Mechanical and Automation Engineering The Chinese University of Hong KongHong KongChina

Segmented Active Constrained Layer Damping(SACLD)is an intelligent vibration-damping structure,which could be applied to the sectors of aviation,aerospace,and transportation engineering to reduce the vibration of flexible ***,machine learning technology is widely used in the engineering field because of its efficient multi-objective *** dynamic simulation of a rotational segmental flexible manipulator system is presented,in which enhanced active constrained layer damping is carried out,and the neural network model of Genetic Algorithm-Back Propagation(GA-BP)algorithm is *** suppression and structural optimization of the SACLD manipulator model are studied based on vibration mode and damping *** modal responses of the SACLD manipulator model at rest and rotation are *** addition,the four model indices are optimized using the GA-BP neural network:axial incision size,axial incision position,circumferential incision size,and circumferential incision ***,the best model for vibration suppression is obtained.

关键词： Machine learning Vibration suppression Flexible manipulator Segmented active constrained layer damping Structural optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preface to the Special Issue:Additive Manufacturing—Expanding Production Horizon

引用

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 1-2页

作者： Lai-chang zhang Centre for Advanced Materials and Manufacturing School of EngineeringEdith Cowan University270 Joondalup DriveJoondalupPerthWA6027Australia

Additive manufacturing(AM),commonly known as 3D printing,has become a transformative technology that has a profound impact on various industrial *** encompasses a set of techniques for building objects layer by layer from digital *** conventional subtractive manufacturing methods that involve removing material from large blocks,AM adds material incrementally,providing unprecedented design flexibility and efficiency.

关键词： removing printing Expanding

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis of debris flow control effect and hazard assessment in Xinqiao Gully,Wenchuan M_(s)8.0 earthquake area based on numerical simulation

引用

China Geology 2024年第2期7卷 248-263页

作者： chang Yang Yong-bo Tie xian-zheng zhang Yan-feng zhang Zhi-jie Ning Zong-liang Li Chinese Academy of Geological Sciences Beijing 100037China Chengdu Center of China Geological Survey China Geological SurveyChengdu 610081China Technology innovation center for risk prevention and mitigation of geohazard Ministry of Natural ResourcesChengdu 611734China Observation and Research Station of Chengdu Geological Hazards Ministry of Natural ResourcesChengdu 610000China

Xinqiao Gully is located in the area of the 2008 Wenchuan M_(s)8.0 earthquake in Sichuan province,*** on the investigation of the 2023"6-26"Xinqiao Gully debris flow event,this study assessed the effectiveness of the debris flow control project and evaluated the debris flow *** field investigation and numerical simulation methods,the indicators of flow intensity reduction rate and storage capacity fullness were proposed to quantify the effectiveness of the engineering measures in the debris flow *** simulation results show that the debris flow control project reduced the flow intensity by41.05%to 64.61%.The storage capacity of the dam decreases gradually from upstream to the mouth of the gully,thus effectively intercepting and controlling the debris *** evaluating the debris flow of different recurrence intervals,further measures are recommended for managing debris flow events.

关键词： Landslide Debris flow Hazard assessment Numerical simulation OpenLISEM Prevention and control project Wenchuan M_(s)8.0 earthquake Xinqiao Gully Sichuan province Geological hazards survey engineering

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Communication Resource-Efficient Vehicle Platooning Control With Various Spacing Policies

引用

IEEE/CAA Journal of Automatica Sinica 2024年第2期11卷 362-376页

作者： Xiaohua Ge Qing-Long Han xian-Ming zhang Derui Ding IEEE School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourne VIC 3122Australia

Platooning represents one of the key features that connected automated vehicles may possess as it allows multiple automated vehicles to be maneuvered cooperatively with small headways on roads. However, a critical challenge in accomplishing automated vehicle platoons is to deal with the effects of intermittent and sporadic vehicle-to-vehicle data transmissions caused by limited wireless communication resources. This paper addresses the co-design problem of dynamic event-triggered communication scheduling and cooperative adaptive cruise control for a convoy of automated vehicles with diverse spacing policies. The central aim is to achieve automated vehicle platooning under various gap references with desired platoon stability and spacing performance requirements, while simultaneously improving communication efficiency. Toward this aim, a dynamic event-triggered scheduling mechanism is developed such that the intervehicle data transmissions are scheduled dynamically and efficiently over time. Then, a tractable co-design criterion on the existence of both the admissible event-driven cooperative adaptive cruise control law and the desired scheduling mechanism is derived. Finally, comparative simulation results are presented to substantiate the effectiveness and merits of the obtained results.

关键词： Automated vehicles constant time headway spacing constant spacing cooperative adaptive cruise control event-triggered communication vehicle platooning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cross section determination of^(27)Al(n,2n)^(26)Al reaction induced by 14-MeV neutrons uniting with D-T neutron activation and AMS techniques

引用

Nuclear Science and Techniques 2024年第6期35卷 78-89页

作者： xian-Lin Yang chang-Lin Lan Yu-Ting Wei Yi zhang Gong Jiang Bo Xie Yu Liu Hong-Tao Shen Xiao-Jun Sun School of Nuclear Science and Technology Lanzhou UniversityLanzhou 730000China MOE Frontiers Science Center for Rare Isotopes Lanzhou UniversityLanzhou 730000China State Key Laboratory of Environmental Geochemistry Institute of GeochemistryChinese Academy of SciencesGuiyang 550081China Guangxi Key Laboratory of Nuclear Physics and Nuclear Technology Guangxi Normal UniversityGuilin 541004China

Aluminum is the primary structural material in nuclear engineering,and its cross section induced by 14-MeV neutrons is of great *** address the issue of insufficient accuracy for the^(27)Al(n,2n)^(26)Al reaction cross section,the activation method and accelerator mass spectrometry(AMS)technique were used to determine the^(27)Al(n,2n)^(26)Al cross section,which could be used as a D-T plasma ion temperature monitor in fusion *** the China Academy of Engineering Physics,neutron activation was performed using a K-400 neutron generator produced by the T(d,n)4He ***^(26)Al∕^(27)Al isotope ratios were measured using the newly installed GYIG 1 MV AMS at the Institute of Geochemistry,Chinese Academy of *** neutron flux was monitored by measuring the activity of 92mNb produced by the 93Nb(n,2n)92mNb *** measured results were compared with available data in the experimental nuclear reaction database,and the measured values showed a reasonable degree of consistency with partially available literature *** newly acquired cross-sectional data at 12 neutron energy points through systematic measurements clarified the divergence,which has two different growth trends from the existing experimental *** obtained results are also compared with the corresponding evaluated database,and the newly calculated excitation functions with TALYS−1.95 and EMPIRE−3.2 codes,the agreement with CENDL−3.2,TENDL-2021 and EMPIRE−3.2 results are generally acceptable.A substantial improvement in the knowledge of the^(27)Al(n,2n)^(26)Al reaction excitation function was obtained in the present work,which will lay the foundation for the diagnosis of the fusion ion temperature,testing of the nuclear physics model,evaluation of nuclear data,etc.

关键词： 14-MeV neutron ^(27)Al(n,2n)^(26)Al Cross section AMS

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：