检索结果-南通市图书馆

Transfer characteristics of nitrogen fixed by leguminous green manure crops when intercropped with maize in northwestern China

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2022年第4期21卷 1177-1187页

作者： LIU Rui ZHOU Guo-peng CHANG Dan-na GAO Song-juan HAN Mei zhang jiu-dong SUN Xiao-feng CAO Wei-dong Institute of Soil and Fertilizer Qinghai Academy of Agriculture and Forestry Sciences/The Graduate SchoolQinghai UniversityXining 810016P.R.China Key Laboratory of Plant Nutrition and Fertilizer Ministry of Agriculture and Rural Affairs/Institute of Agricultural Resources and Regional PlanningChinese Academy of Agricultural SciencesBeijing 100081P.R.China College of Resources and Environmental Sciences Nanjing Agricultural UniversityNanjing 210095P.R.China Institute of Soil and Fertilizer and Water-saving Gansu Academy of Agricultural SciencesLanzhou 730070P.R.China

To ascertain the possibility of cultivating maize using biological nitrogen fixation(BNF)by leguminous green manure crops in maize/leguminous green manure intercropping systems,BNF and nitrogen(N)transfer were studied in Xining and Wuwei,two typical northwestern Chinese *** experimental treatments included monocultured maize,monocultured green manures(hairy vetch and common vetch),and their intercropping *** proportions of N derived from the atmosphere(%N_(dfa))in intercropping systems were not significantly different from that in monocultured green manure systems at either experimental site,except for that in hairy vetch(HV)in *** amount of N derived from the atmosphere(N_(dfa))of common vetch(CV)significantly decreased from 1.16 and 1.10 g/pot in monoculture to 0.77 and 0.55 g/pot when intercropped with maize,in Xining and Wuwei,respectively,and the N_(dfa) of HV when intercropped significantly decreased from 1.02 to 0.48 g/pot in *** the intercropping systems in Xining and Wuwei,the amounts of N transferred(N_(transfer))from CV to maize were 21.54 and 26.81 mg/pot,accounting for 32.9 and 5.9%respectively of the N accumulation in maize,and the values of N_(transfer) from HV to maize were 39.61 and 46.22 mg/pot,accounting for 37.0 and 23.3%,respectively,of the N accumulation in *** analysis showed that soil nutrient and green manure biomass were mainly related to N_(dfa),and thatδ^(15) N had a primary relationship with N_(transfer).We found that 5.9-37.0%of N accumulation in maize was transferred from green manures,and that the N transfer ability to maize of HV was higher than that of *** conclusion,intercropping with leguminous green manures provided a feasible way for maize to effectively utilize biologicallyfixed N.

关键词： green manure maize intercropping biological nitrogen fixation nitrogen transfer

Deep learning CNN-APSO-LSSVM hybrid fusion model for feature optimization and gas-bearing prediction

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2329-2344页

作者： jiu-Qiang Yang Nian-Tian Lin Kai zhang Yan Cui Chao Fu dong zhang College of Earth Sciences and Engineering Shandong University of Science and Technology Laboratory for Marine Mineral Resources Qingdao National Laboratory for Marine Science and Technology Transportation Institute of Inner Mongolia University Key Laboratory of Gas Hydrate Qingdao Institute of Marine Geology Ministry of Natural Resources

Conventional machine learning(CML) methods have been successfully applied for gas reservoir prediction. Their prediction accuracy largely depends on the quality of the sample data; therefore, feature optimization of the input samples is particularly important. Commonly used feature optimization methods increase the interpretability of gas reservoirs; however, their steps are cumbersome, and the selected features cannot sufficiently guide CML models to mine the intrinsic features of sample data efficiently. In contrast to CML methods, deep learning(DL) methods can directly extract the important features of targets from raw data. Therefore, this study proposes a feature optimization and gas-bearing prediction method based on a hybrid fusion model that combines a convolutional neural network(CNN)and an adaptive particle swarm optimization-least squares support vector machine(APSO-LSSVM). This model adopts an end-to-end algorithm structure to directly extract features from sensitive multicomponent seismic attributes, considerably simplifying the feature optimization. A CNN was used for feature optimization to highlight sensitive gas reservoir information. APSO-LSSVM was used to fully learn the relationship between the features extracted by the CNN to obtain the prediction results. The constructed hybrid fusion model improves gas-bearing prediction accuracy through two processes of feature optimization and intelligent prediction, giving full play to the advantages of DL and CML methods. The prediction results obtained are better than those of a single CNN model or APSO-LSSVM model. In the feature optimization process of multicomponent seismic attribute data, CNN has demonstrated better gas reservoir feature extraction capabilities than commonly used attribute optimization methods. In the prediction process, the APSO-LSSVM model can learn the gas reservoir characteristics better than the LSSVM model and has a higher prediction accuracy. The constructed CNN-APSO-LSSVM mode

关键词： Multicomponent seismic data Deep learning Adaptive particle swarm optimization Convolutional neural network Least squares support vector machine Feature optimization Gas-bearing distribution prediction

Symmetrization of quasi-regular patterns with periodic tilting of regular polygons

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computational Visual Media 2024年第3期10卷 559-576页

作者： Zhengzheng Yin Yao Jin Zhijian Fang Yun zhang Huaxiong zhang jiu Zhou Lili He School of Computer Science and Technology Zhejiang Sci-Tech UniversityHangzhou 310018China Zhejiang Provincial Innovation Center of Advanced Textile Technology Shaoxing 312000China School of Media Engineering Communication University of ZhejiangHangzhou 310018China

Computer-generated aesthetic patterns arewidely used as design materials in various fields. Themost common methods use fractals or dynamicalsystems as basic tools to create various patterns. Toenhance aesthetics and controllability, some researchershave introduced symmetric layouts along with thesetools. One popular strategy employs dynamical systemscompatible with symmetries that construct functionswith the desired symmetries. However, these aretypically confined to simple planar symmetries. Theother generates symmetrical patterns under theconstraints of tilings. Although it is slightly moreﬂexible, it is restricted to small ranges of tilingsand lacks textural variations. Thus, we proposed anew approach for generating aesthetic patterns bysymmetrizing quasi-regular patterns using general kuniformtilings. We adopted a unified strategy toconstruct invariant mappings for k-uniform tilings thatcan eliminate texture seams across the tiling ***, we constructed three types of symmetriesassociated with the patterns: dihedral, rotational, andreﬂection symmetries. The proposed method can beeasily implemented using GPU shaders and is highlyefficient and suitable for complicated tiling with regularpolygons. Experiments demonstrated the advantages of our method over state-of-the-art methods in terms ofﬂexibility in controlling the generation of patterns withvarious parameters as well as the diversity of texturesand styles.

关键词： quasi-regular patterns(QRP) k-uniform tilings invariant mappings symmetry aesthetic patterns

Arbitrary topological charge vortex beams from carbon dots random lasers

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3844-3853页

作者： Xiang-dong Wang Xiao-Bo Mi jiu-Ru He Feng-Ying Ma Jun-Qiao Wang Li Song Yong-Qiang zhang Si-Yu Lu Yong-Sheng Hu School of Physics and Microelectronics Zhengzhou UniversityZhengzhou 450001China State Key Laboratory of Reliability and Intelligence of Electrical Equipment and Tianjin Key Laboratory of Electronic Materials and Devices School of Electronics and Information EngineeringHebei University of TechnologyTianjin 300401China Green Catalysis Center College of ChemistryZhengzhou UniversityZhengzhou450001China

Vortex beams have attracted great attention due to their promising applications in the fields of high-capacity optical communication,optical micromanipulation,and quantum information ***,we demonstrate vortex beams with flexible control of the topological charge and modes in a carbon dots random laser for the first *** beams with different types,including the Laguerre-Gaussian(LG),Bessel-Gaussian(BG),LG-superposition,and polarized vortex beams with topological charges up to 50,have been successfully ***,vortex beams can be well realized in carbon dots random lasers with different emission wavelengths covering from 465 to 612 *** work would not only enrich the types of vortex laser,especially for solution-processable lasers,but also provide a new route to realizing multicolor and wavelength-tunable vortex lasers.

关键词： Carbon dots Random lasers Vortex beam Topological charge Spatial light modulator

Response of ocean acidification to atmospheric carbon dioxide removal

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第6期140卷 79-90页

作者： jiu Jiang Long Cao Xiaoyu Jin Zechen Yu Han zhang Jianjie Fu Guibin Jiang School of Environment Hangzhou Institute for Advanced StudyUniversity of Chinese Academy of SciencesHangzhou 310024China State Key Laboratory of Environmental Chemistry and Ecotoxicology Research Center for Eco-Environmental SciencesChinese Academy of SciencesBeijing 100085China Key Laboratory of Geoscience Big Data and Deep Resources of Zhejiang Province School of Earth SciencesZhejiang UniversityHangzhou 310058China Zhejiang Climate Center Hangzhou 310052China

Artificial CO_(2)removal from the atmosphere(also referred to as negative CO_(2)emissions)has been proposed as a potential means to counteract anthropogenic climate *** we use an Earth system model to examine the response of ocean acidification to idealized atmospheric CO_(2)removal *** our simulations,atmospheric CO_(2)is assumed to increase at a rate of 1%per year to four times its pre-industrial value and then decreases to the pre-industrial level at a rate of 0.5%,1%,2%per year,*** results show that the annual mean state of surface ocean carbonate chemistry fields including hydrogen ion concentration([H^(+)]),pH and aragonite saturation state respond quickly to removal of atmospheric CO_(2).However,the change of seasonal cycle in carbonate chemistry lags behind the decline in atmospheric CO_(2).When CO_(2)returns to the pre-industrial level,over some parts of the ocean,relative to the pre-industrial state,the seasonal amplitude of carbonate chemistry fields is substantially *** results also show that changes in deep ocean carbonate chemistry substantially lag behind atmospheric CO_(2)*** CO_(2)returns to its pre-industrial value,the whole-ocean acidity measured by[H^(+)]is 15%-18%larger than the pre-industrial level,depending on the rate of CO_(2)*** study demonstrates that even if atmospheric CO_(2)can be lowered in the future as a result of net negative CO_(2)emissions,the recovery of some aspects of ocean acidification would take decades to centuries,which would have important implications for the resilience of marine ecosystems.

关键词： Carbon dioxide removal Net negative CO_(2)emission Ocean acidification Climate change Earth system modeling

Strong metal-support interactions between highly dispersed Cu^(+) species and ceria via mix-MOF pyrolysis toward promoted water-gas shift reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 475-483页

作者： Xiao-Chen Sun Xing-Chi Li Ze-Wei Xie Chen-Yue Yuan De-jiu Wang Qian zhang Xiao-Yu Guo Hao dong Hai-Chao Liu Ya-Wen zhang Beijing National Laboratory for Molecular Sciences(BNLMS) State Key Laboratory of Rare Earth Materials Chemistry and ApplicationsPKU-HKU Joint Laboratory in Rare Earth Materials and Bioinorganic ChemistryCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China Beijing National Laboratory for Molecular Sciences(BNLMS) College of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China Beijing National Laboratory for Molecular Sciences(BNLMS) State Key Laboratory for Structural Chemistry of Stable and Unstable SpeciesCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China

The modulation of metal-support interfacial interaction is significant but challenging in the design of high-efficiency and high-stability supported ***,we report a synthetic strategy to upgrade Cu-CeO_(2)interfacial interaction by the pyrolysis of mixed metal-organic framework(MOF)*** obtained highly dispersed Cu/CeO_(2)-MOF catalyst via this strategy was used to catalyze water-gas shift reaction(WGSR),which exhibited high activity of 40.5μmolCOgcat^(-1).s^(-1)at 300℃and high stability of about 120 *** on comprehensive studies of electronic structure,pyrolysis strategy has significant effect on enhancing metal-support interaction and then stabilizing interfacial Cu^(+)species under reaction *** Cu^(+)species and generated oxygen vacancies over Cu/CeO_(2)-MOF catalyst played a key role in CO molecule activation and H2O molecule dissociation,*** collaborated closely and then promoted WGSR catalytic performance in comparison with traditio nal supported *** study shall offer a robust approach to harvest highly dispersed catalysts with finely-tuned metal-support interactions for stabilizing the most interfacial active metal species in diverse heterogeneous catalytic reactions.

关键词： Cu-based catalyst MOF derivative Water-gas shift reaction Metal-support interaction

Snap-through behaviors and nonlinear vibrations of a bistable composite laminated cantilever shell:an experimental and numerical study

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 779-794页

作者： Lele REN Wei zhang Ting dong Yufei zhang State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong UniversityShanghai 200240China Department of Mechanics Guangxi UniversityNanning 530004China Beijing Key Laboratory of Nonlinear Vibrations and Strength of Mechanical Structures College of Mechanical EngineeringBeijing University of TechnologyBeijing 100124China School of Mechanical Engineering Beijing Institute of TechnologyBeijing 100081China

The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical *** improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric *** symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of *** motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement *** numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is *** numerical solutions are in good agreement with the experimental *** nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively *** to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.

关键词： bistable composite laminated cantilever shell snap-through behavior nonlinear vibration nonlinear stiffness characteristic chaos and bifurcation

Analysis and experimental study on resistance-increasing behavior of composite high efficiency autonomous inflow control device

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1290-1304页

作者： Liang-Liang dong Yu-Lin zhang School of Mechatronic Engineering Southwest Petroleum UniversityChengdu610500SichuanChina State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500SichuanChina Oil and Gas Equipment Technology Sharing and Service Platform of Sichuan ProvinceChengdu610500SichuanChina

Bottom water coning is the main reason to reduce the recovery of horizontal bottom water reservoir. By water coning, we mean the oil-water interface changes from a horizontal state to a mound-shaped cone and breaks through to the wellbore. Autonomous inflow control device(AICD) is an important instrument maintain normal production after bottom water coning, however, the resistance increasing ability of the swirl type AICD is insufficient at present, which seriously affects the water control effect. Aiming this problem, this paper designs a multi-stage resistance-increasing and composite type AICD. The separation mechanism of oil-water two phases in this structure, the resistance form of oil-water single phase and the resistance-increasing principle of water phase are analyzed. Establishing the dual-phase multi-stage separation and resistance-increasing model, and verified by measuring the throttling pressure drop and oil-water volume fraction of the AICD, it is found that the composite type AICD has the effect of ICD and AICD at the same time, which can balance the production rate of each well section at the initial stage of production, delay the occurrence of bottom water coning. In the middle and later stages of production, water-blocking can be effectively increased to achieve water control and stable *** structural sensitivity analysis, the influence law of various structural parameters on the water control performance of composite AICD was obtained. The simulation calculation results show that,compared with the existing swirl type AICD, composite AICD has higher sensitivity to moisture content,the water phase throttling pressure drop is increased by 4.5 times on average. The composite AICD is suitable for the entire stage of horizontal well production.

关键词： Water control Flow separation Flow resistance-increasing AICD device Simulation and experiment

Combustion characteristics of millimeter-sized aluminum particles in fluidized bed under various O_(2)/CO_(2)/H_(2)O atmospheres Author links open overlay panel

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 315-322页

作者： Jialing Zhou Rui zhang dong Liu Key Laboratory of Thermal Control of Electronic Equipment Ministry of Industry and Information TechnologyNanjing210094China Advanced Combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing210094China

Aluminum is an attractive alternative fuel,but it burns very inefficiently due to the formation of a dense Al_(2)O_(3)layer which prevents O_(2)from diffusion to the surface of Al *** previous experiments,the combustion of millimeter-sized Al(mAl)particles in the fluidized bed has achieved a substantial increase in the combustion efficiency,but further improvements are still *** this study,the effects of reaction atmosphere on the fluidized combustion of mAl particles were *** experiments with different O_(2)/H_(2)O/CO_(2)concentrations were *** experimental results indicate that the combustion efficiency of mAl particles in fluidized bed increases as the mole fraction of O_(2),H_(2)O or CO_(2)increases,and the highest combustion efficiency can reach 38.7%.After the analysis of the oxide film on the surface of aluminum particles,it was found that it is easier to generate the unstableθ-Al_(2)O_(3)under CO_(2)atmosphere,and it is easier to generate the unstableγ-Al_(2)O_(3)andθ-Al_(2)O_(3)under H_(2)O *** unstable Al_(2)O_(3)film is more likely to be abraded in the fluidized bed,which leads to the effective improvement of the combustion efficiency.

关键词： Al combustion Fluidized bed Atmosphere Combustion efficiency