检索结果-南通市图书馆

What is going on in magnesium alloys？

Journal of Materials Science & Technology 2018年第2期34卷 245-247页

作者： X.J. Wang D.K. Xu R.z. Wu X.B. Chen q.M. Peng L. Jin Y.C. Xin z.q. zhang Y. Liu X.H. Chen G. Chen K.K. Deng H.Y. Wang School of Materials Science and Engineering Harbin Institute of Technology Harbin 150001 China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal Research Chinese Academy of Sciences Shenyang 110016 China Key Laboratory of Superlight Materials & Surface Technology (Ministry of Education) Harbin Engineering University Harbin 150001 China School of Engineering RMIT University City Campus Carlton VIC 3053 Australia State Key Laboratory of Metastable Materials Science and Technology Yanshan University Qinhuangdao 066004 China National Engineering Research Center of Light Alloy Net Forming Shanghai Jiao Tong University Shanghai 200240 China College of Materials Science and Engineering Chongqing University Chongqing 400030 China Key Lab of Electromagnetic Processing of Materials Ministry of Education Northeastern UniversityShnenyang 110819China Key Laboratory of Lightweight and High Strength Structural Materials of Jiangxi Province Nanchang University Nanchang 330031 China School of Chemical Engineering and Technology Tianjin University Tianjin 300350 China Shanxi Key Laboratory of Advanced Magnesium-Based Materials Taiyuan University of Technology Taiyuan 030024 China Key Laboratory of Automobile Materials of Ministry of Education & School of Materials Science and Engineering Jilin University Changchun 130025 China

China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin （2015） and Chongqing （2016） China, respectively. A number of crucial research inter- ests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows： i） Plastic deformation mechanism and strengthening strategy, ii） Design and development of new Mg-based materials, iii） Key service properties, and iv） New processing technologies.

关键词： Mg alloys Plastic deformation Strengthening Alloying design High performance Corrosion Fatigue behavior Creep Processing technologies Purification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stamping Robust Design Method and Its Application

引用

上海交通大学学报 2004年第z2期38卷 161-165页

作者： z.q. Lin Jian Ai Weigang zhang Shuhui Li School of Mechanical Engineering Shanghai Jiaotong Univ. Shanghai200030 China Baoshan Iron&Steel Co. ltd Baoshan Shanghai China School of Mechanical Engineering Shanghai Jiaotong Univ. Shanghai200030 China School of Mechanical Engineering Shanghai Jiaotong Univ. Shanghai200030 China

The application of the robust design to stamping is discussed in the paper. The regression equation of the quality index and its influencing factors can be attained by using method of central composite design. Stamping computer simulation takes the place of real stamping experiments to fulfill the special experimental conditions. The real stamping experiments prove the correctness and the feasibility of the stamping robust design method-central composite design.

关键词： robust design central composite design computer simulation integrated quality index

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

MATRIX INVESTIGATION ON ISAICHEV ORIENTATION RELATIONSHIP

引用

Acta Metallurgica Sinica(English Letters) 1999年第2期12卷 185-190页

作者： Sheng, z.q. Xiao, H. Nuclear Power Inst of China Chengdu China

By means of TEM technique the orientation relationships of cementite, precipitated from islands of granular bainite during tempering, with ferrite have been observed. By calculating the eigenvalues and eigenvectors of transformation matrix, Isaichev relationship has been analyzed. The results indicate that Isaichev relationship is indeed the sum of Kurdjumov-Sachs relationship and Pitsch relationship, so the viewpoint that the cementite with Isaichev relationship precipitates from austenite, instead of ferrite, was confirmed. Moreover, the matrix calculation shows that three reported orientation relationships among austenite, ferrite and cementite in pearlitic transformation cannot be simultaneously valid. (Edited author abstract) 4 Refs.

关键词： Carbides Crystal orientation Eigenvalues and eigenfunctions Nuclear reactors Pearlitic transformations Phase transitions

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

FEM SIMULATION OF RESIDUAL STRESSES INDUCED BY LASER SHOCK WITH OVERLAPPING LASER SPOTS

引用

Acta Metallurgica Sinica(English Letters) 2008年第2期21卷 125-132页

作者： Y.X. Hu z.q. Yao State Key Laboratory of Mechanical System and Vibration Shanghai Jiaotong University Shanghai 200240China

The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single laser shock with square and round laser spot is predicted and validated by experimental results. With the Finite Element Method （FEM） model, effects of different overlapping rates and impact sequences on the distribution of residual stresses are simulated. The results indicate that：（1） Overlapping laser shock can increase the compressive residual stresses. However, it is not effective on the growth of plastically affected depth; （2） Overlapping rate should be optimized and selected carefully for the large area treatment. Appropriate overlapping rate is beneficial to obtain a homogeneous residual stress field; （3） The impact sequence has a great effect on the residual stress field. It can greatly attenuate the phenomenon of the “residual stress hole” to obtain a homogeneous residual stress field.

关键词： Laser shock processing Overlapping Residual stress Finite element method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis and Characterization of Fe_(50)Cr_(14)Mo_(14)C_(14)B_6Gd_2 Bulk Amorphous Steel

引用

Journal of Materials Science & Technology 2010年第9期26卷 783-786页

作者： M. Iqbal J.I. Akhter H.F. zhang z.q. Hu Physics Division Pakistan Institute of Nuclear Science &: Technology P.O. Nilore Islamabad Pakistan Shenyang National Laboratory for Materials Science Institute of Metal Research Chinese Academy of SciencesShenyang 110016 China

Bulk amorphous steel having 7 mm thickness was synthesized to evaluate its thermal stability and mechanical *** steel was synthesized by Cu mold casting technique using 1-2N pure *** of the material was done by X-ray diffraction,differential scanning calorimetry and scanning electron *** activation energies were calculated by Kissinger equation and it was found that the steel had better stability against *** properties like Vicker s hardness,nanohardness,elastic modulus and elastic recovery of as-cast and annealed samples were *** was concluded that the present steel had good glass-forming ability（GFA） and mechanical properties.

关键词： Bulk amorphous steels Activation energy Glass-forming ability Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

First-principles Investigation of Bi Segregation at the Solder Interface of Cu/Cu_3Sn(010)

引用

Journal of Materials Science & Technology 2010年第12期26卷 1057-1062页

作者： X.Y. Pang z.q. Liu S.q. Wang J.K. Shang Shenyang National Laboratory for Materials Science Institute of Metal Research Chinese Academy of Sciences Shenyang 110016 China Department of Materials Science and Engineering University of Illinois at Urbana-Champaign IL 61801 USA

Density functional theory was employed to investigate the bismuth segregation at Cu/Cu3Sn（010） interface. Five initial constructions were introduced by adopting the adhesion energy criterion. Among them, the so-called ＂between-Cu＂ construction in which the interface Cu atoms of Cu slab locate along Cu-Cu bond direction in Cu3Sn slab was found to be the most energy-favored at an adhesion energy of 1.96 J/m^2. Based on this construction, five possible segregation sites were examined, and the most likely segregation site was determined with adhesion energy as low as 1.06 J/m^2, which was almost half of the initial one. Comparing with other sitest adhesion energies, it was concluded that size effect took a large part in embrittlement. The analyses of atomic structure and electronic density revealed that the slabs shifted away from interfaces due to bismuth segregation, and the atoms around Bi atom were Dressed away. This calculated work agreed aualitativelv with reported experimental results.

关键词： First-principles calculation Segregation Bismuth Interface SnBi solder

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

SURFACE COMPOSITE GEAR AND PIPE MADE BY SEPARATED EUTECTIC TECHNOLOGY

引用

Acta Metallurgica Sinica(English Letters) 2000年第3期13卷 883-887页

作者： Cao, z.q. Piao, L.Y. zhang, X.G. Li, z. Jin, J.z. Dalian Univ of Technology Dalian China

It is found that the anomalous eutectics can be separated on macroscopic scale by flow caused by electromagnetic stirring, and the separated phase is the leading faceted phase with the solution entropy over 23 J/(mol·K). By using this technology, a new kind of composite pipe and gear with good abrasive properties were made without adding any reinforced particles. Emphases were paid on the researches about formation mechanism of separated eutectic and abrasive property of the composite pipe or gear. The result shows that the entropy of solution controlling the eutectic microstructure is also valid and useful as a criterion of separated eutectic, and the kind and its chemical scope of the off-eutectic used to make composite can be calculated according to this theory.

关键词： Binary alloys Eutectics Gears Microstructure Pipe Rotational flow Separators Solidification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tizr-base Bulk Metallic Glass with over 50 mm in Diameter

引用

Journal of Materials Science & Technology 2010年第6期26卷 481-486页

作者： M. q. Tang H.F. zhang z. W. zhu H.M. Fu A.M. Wang H. Li z.q. Hu Shenyang National Laboratory for Materials Science Institute of Metal Research Chinese Academy of Sciences 72Wenhua Road Shenyang 110016 China

Low-cost Tizr-base bulk metallic glasses （BMGs）（Ti36.1zr33.2Ni5.8Be24.9）100-xCux （x=5, 7 and g） with a maximum size of over 50 mm in diameter were developed by optimizing the alloy composition. The idea is initiated by selecting a particular microstructure comprising primary β-Ti dendrite and amorphous phase. Afterwards, based on this composition of amorphous phase, a class of Tizr-base bulk metallic glasses was designed step by step to reach the optimum composition range. The glass transition temperature （Tg）, initial crystallization temperature （Tx） and width of supercooled region （AT） of （***33.2Nis.8Be24.9）91Cu9 BMG are 611, 055 and 44 K, respectively. The （Ti36.1zr33.2Ni5.8Be24.9）91Cu9 BMG exhibits low density of 5.541 g·cm-3 and high compressive fracture strength of 1800 MPa, which promises the potential application as structural materials.

关键词： Tizr-base alloy Bulk metallic glass (BMG) Fracture strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

STUDY ON TEMPERATURE FIELD INDUCED IN HIGH FREqUENCY INDUCTION HEATING

引用

Acta Metallurgica Sinica(English Letters) 2006年第3期19卷 190-196页

作者： H. Shen z.q. Yao Y.J. Shi J. Hu School of Mechanical Engineering Shanghai Jiaotong University Shanghai 200030 China

A mathematical model was established for the temperature field developed during high frequency induction heating （HFIH） by Maxwell＇s equations. It required solving the coupled equations of the electromagnetic and temperature fields. The numerical simudation was performed using FEMLAB. The comparison of the calculations using the proposed model with experimental results showed a very good correlation. The effects of the heating parameters in high frequency induction such as the distance between the plate and the coil, the applied current, the frequency, and the turns of the coil on the temperature profiles developed in the plate were also discussed using the established model.

关键词： high frequency induction temperature field numerical simudation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

NUMERICAL INVESTIGATION OF STRAIGHT-LINE LASER FORMING UNDER THE TEMPERATURE GRADIENT MECHANISM

引用

Acta Metallurgica Sinica(English Letters) 2006年第2期19卷 144-150页

作者： Y.J. Shi H. Shen z.q. Yao J. Hu School of Mechanical and Power Engineering Shanghai Jiaotong University Shanghai 200030 China

Laser forraing is a new flexible and dieless forming technique. To achieve the high accuracy forming, the temperature gradient mechanism （TGM） is studied. In the analysis of TGM, the plate bends about x-axis and about y-axis as well. To understand the deformation trend, the numerical simulation of deformation of plate is conducted by choosing different laser powers, laser spot diameters, scanning speeds, lengths, widths and thicknesses. From the results of simulation, it can be seen that the laser spot diameter, the scanning speed, laser power and thickness of plate play dominant roles in the laser forming process. However, the bending angles αx and αy show different trends with the variation of parameters. In addition, in comparison with above four parameters, the effect of length and width of plate on the beading angle may be neglected, but their effects are significant for the bending radius R.

关键词： laser forming temperature gradient mechanism metal plate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：