检索结果-南通市图书馆

Numerical study on local failures of reinforced concrete slabs against underwater close-in explosions

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of zhejiang University-Science A(Applied Physics & Engineering) 2024年第8期25卷 650-669页

作者： Fei zHOU Hedong LI hao wu College of Civil Engineering Tongji UniversityShanghai 200092China School of Civil Engineering and Architecture Zhejiang Sci-Tech UniversityHangzhou 310018China

Reinforced concrete(RC)slabs are the primary load-carrying member of underwater *** can suffer severe local failures such as cratering,spalling,or breaching as a result of underwater close-in(UWCI)*** this study,we established a fully validated high-fidelity finite element analysis approach to precisely reproduce the local failures of RC slabs after a UWCI explosion.A recently proposed dynamic constitutive model is used to describe wet *** effects of free water content on the material properties,including the tensile/compressive strength,elastic modulus,strain rate effect,failure strength surface,and equation of state,are comprehensively calibrated based on existing test *** calibrated material parameters are then verified by a single-element test.A high-fidelity finite element analysis(FEA)approach of an RC slab subjected to a UWCI explosion is established using an arbitrary Lagrangian-Eulerian(ALE)*** previous UWCI explosion tests on RC orifice targets and underwater contact explosion tests on saturated concrete slabs showed that the established FEA approach could accurately reproduce the pressure-time history in water and damage patterns,including the cracking,cratering,and spalling,of the RC orifice target and saturated concrete ***,parametric studies conducted by simulating an RC slab subjected to a UWCI explosion showed that:(i)the local failure of an RC slab enlarges with increased charge weight,reduced standoff distance,and reduced structural thickness;(ii)compared to a water-backed RC slab,an air-backed RC slab exhibits much more obvious local and structural ***,to aid the anti-explosion design of relevant underwater facilities,based on over 90 simulation cases empirical formulae are summarized to predict local failure modes,i.e.,no spall,spall,and breach,of water-and air-backed RC slabs subjected to a UWCI explosion.

关键词： Reinforced concrete slab(RC) Underwater close-in(UWCI)explosion Saturated concrete Failure modes Numerical simulation

A level line of the Gaussian free field with measure-valued boundary conditions

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Mathematics 2024年第2期67卷 367-404页

作者： Titus Lupu hao wu Laboratoire de Probabilités Statistique et ModélisationSorbonne Universitéand UniversitéParis CitéCNRSParis F-75005France Yau Mathematical Sciences Center Tsinghua UniversityBeijing 100084China

In this article, we construct samples of Schramm-Loewner-evolution-like curves out of samples ofthe conformal loop ensemble and Poisson point processes of Brownian excursions. We show that the laws of thesecurves depend continuously on the intensity measure of the Brownian excursions. Using such a construction ofcurves, we extend the notion of level lines of the Gaussian free field to the case where the boundary conditionis measure-valued.

关键词： Schramm-Loewner evolution conformal loop ensemble Brownian excursion Gaussian free field

Method for determining the position of landslide slip-surface with a typical inclinometric curves

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第2期21卷 413-432页

作者： CHEN hao wu Hong-gang Ocean College Zhejiang UniversityZhoushan 316000China China Northwest Research Institute Co.Ltd.of CREC Lanzhou 730070China

In the actual monitoring of deep hole displacement,the identification of slip surfaces is primarily based on abrupt changes observed in the inclinometric *** conventional identification methods,inclinometric curves exhibiting indications of sliding can be categorized into three types:B-type,D-type,and *** position of the slip surface is typically determined by identifying the depth corresponding to the point of maximum displacement ***,this method is sensitive to the interval of measurement points and the observation scale of the coordinate axes and suffers from unclear sliding surfaces and uncertain *** on the variation characteristics of these diagonal curves,we classified the landslide into three components:the sliding body,the sliding interval,and the immobile ***,three different generalization models were established to analyze the relationships between the curve form and the slip surface location based on different physical indicators such as displacement rate,relative displacement,and *** results show that the displacement rate curves of an r-type slope exhibit a clustering feature in the sliding interval,and by solving for the depth of discrete points within the step phase,it is possible to determine the location of the slip *** the other hand,D-type slopes have inflection points in the relative displacement curve located at the slip *** acceleration curves of B-type slopes exhibit clustering characteristics during the sliding interval,while the scattered acceleration data demonstrate wandering ***,the slip surface location can be revealed by solving the depth corresponding to the maximum acceleration with cubic spline *** approach proposed in this paper was applied to the monitoring data of a landslide in Yunnan Province,*** results indicate that our approach can accurately identify the slip surface location and enable computability of its po

关键词： Inclinometric curve Slip-surface position Displacement rate Relative displacement Acceleration

Toxicity mechanisms of photodegraded polyvinyl chloride nanoplastics on pea seedlings

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第4期18卷 111-124页

作者： hao wu Beibei He Bocheng Chen An Liu College of Chemistry and Environmental Engineering Shenzhen UniversityShenzhen 518060China

Nanoplasctics(NPs),which are very small in particle size,exert toxic effect to ***,compared to original NPs,photodegraded NPs would pose higher *** is because their relatively higher specific surface areas and the presence of additives which can more easily *** original NPs and aged NPs affect plant growth has not been widely *** work chose polyvinyl chloride NPs(PVC-NPs)that were subjected to up to 1000 h UV light radiation to explore the impact of PVC-NPs on the growth of pea seedlings(Pisum Sativum L.).The results indicated the existence of PVC-NPs with longer UV light radiation time and higher concentrations had more negative influences on pea seedlings’growth such as germination rate(decreased by 10.6%–22.5%),stem length(decreased by 2.8%–8.1%),dry weight(decreased by 6.3%–7.1%)and fresh weight(decreased by 6.7%–14.8%).It was also noted that photodegraded PVC-NPs resulted in damage to leaf stomata and roots,hindering photosynthesis and absorption of nutrients and hence the decrease in chlorophyll and soluble sugar *** to transcriptomic investigation results,the presence of aged PVC-NPs primarily influenced protein processing in endoplasmic reticulum(upregulated metabolic pathway)and phenylpropanoid biosynthesis(downregulated metabolic pathway)of pea *** results provide an in-depth understanding of how NPs influence the growth of plants.

关键词： Nanoplasctics Polyvinyl chloride Toxicity mechanisms Plant growth

Preparation of Self-limiting Heating Cables with Excellent Processability, Mechanical Properties and PTC Effect via Thermal and Electrical Treatments

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第4期42卷 511-520页

作者： Tian-hao Yang Tong wu Qiang Fu State Key Laboratory of Polymer Materials Engineering College of Polymer Science and EngineeringSichuan UniversityChengdu610065China State Key Laboratory of Polymer Materials Engineering Polymer Research Institute of Sichuan UniversityChengdu610065China

Polymer/conductive filler composites have been widely used for the preparation of self-limiting heating cables with the positive temperature coefficient (PTC) effect. The control of conductive filler distribution and network in polymer matrix is the most critical for performance of PTC materials. In order to compensate for the destruction of the filler network structure caused by strong shearing during processing, an excessive conductive filler content is usually added into the polymer matrix, which in turn sacrifices its processability and mechanical properties. In this work, a facile post-treatment of the as-extruded cable, including thermal and electrical treatment to produce high-density polyethylene (HDPE)/carbon black (CB) cable with excellent PTC effect, is developed. It is found for the as-extruded sample, the strong shearing makes the CB particles disperse uniformly in HDPE matrix, and 25 wt% CB is needed for the formation of conductive paths. For the thermal-treated sample, a gradually aggregated CB filler structure is observed, which leads to the improvement of PTC effect and the notable reduction of CB content to 20 wt%. It is very interesting to see that for the sample with combined thermal and electrical treatment, CB particles are agglomerated and oriented along the electric field direction to create substantial conductive paths, which leads to a further decrease of CB content down to 15 wt%. In this way, self-limiting heating cables with excellent processability, mechanical properties and PTC effect have simultaneously been achieved.

关键词： Self-limiting heating cables Positive temperature coefficient Thermal treatment Electrical treatment

Optimization of Hydrocracking Process for Enhanced BTX Production from Coal Tar-Derived Hydrorefined Products

在线全文

学校读者我要写书评

暂无评论

China Petroleum Processing & Petrochemical Technology 2024年第1期26卷 139-151页

作者： wu hao Wei Hongyuan School of Chemical Engineering and Technology Tianjin UniversityTianjin 300350China SINOPEC Research Institute of Petroleum Processing Co. Ltd.Beijing 100083China

Hydroconversion of coal tar to produce aromatic hydrocarbons(BTX)represents a crucial strategy for the highvalue hierarchical utilization of *** study focused on the hydrocracking of hydrorefined products derived from coal tar to enhance the production of benzene,toluene,and xylene(BTX).Various reaction conditions,including reaction temperature,hydrogen pressure,space velocity,and hydrogen-to-oil volume ratio,were systematically explored to optimize BTX yields while also considering the process’s economic *** results indicate that increasing the reaction temperature from 360℃ to 390℃ significantly favors the production of BTX,with yields increasing from 21.42%to 41.14%.Similarly,an increase in hydrogen pressure from 4 MPa to 6 MPa boosts BTX production,with yields rising from 36.31%to 41.14%.Reducing the space velocity from 2 h^(-1) to 0.5 h^(-1) also favors the BTX production process,with yields increasing from 37.96%to 45.13%.Furthermore,raising the hydrogen-to-oil volume ratio from 750 to 1500 improves BTX yields from 41.61%to 45.44%.Through economic analysis,the optimal conditions for BTX production were identified as a reaction temperature of 390℃,hydrogen pressure of 5-6 MPa,space velocity of 1 h^(-1),and hydrogen-to-oil volume ratio of 1000,achieving a BTX yield of 43.73%.This investigation highlights the importance of a holistic evaluation of hydrocracking conditions to optimize BTX ***,the findings offer valuable insights for the design and operation of industrial hydrocracking processes aimed at efficiently converting coal tar-derived hydrorefined feedstock into BTX.

关键词： coal tar hydrocracking BTX process optimization economic assessment

Lattice Boltzmann simulation study of anode degradation in solid oxide fuel cells during the initial aging process

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 405-411页

作者： Shixue Liu zhijing Liu Shuxing zhang hao wu Hydrogen Energy Industrial Technology Innovation Center China Nuclear Power Technology Research InstituteShenzhen 518031China Shenzhen Engineering Research Center for Hydrogen Safety Shenzhen 518031China

For present solid oxide fuel cells(SOFCs),rapid performance degradation is observed in the initial aging process,and the dis-cussion of the degradation mechanism necessitates quantitative ***,focused ion beam-scanning electron microscopy was em-ployed to characterize and reconstruct the ceramic microstructures of SOFC *** lattice Boltzmann method(LBM)simulation of multiphysical and electrochemical processes in the reconstructed models was *** samples collected from industrial-size cells were characterized,including a reduced reference cell and a cell with an initial aging *** parameters of the reconstructed microstructures revealed a significant decrease in the active triple-phase boundary and Ni connectivity in the aged cell compared with the reference *** LBM simulation revealed that activity degradation is dominant compared with microstructural degradation during the initial aging process,and the electrochemical reactions spread to the support layer in the aged *** microstructural and activity de-gradations are attributed to Ni migration and coarsening.

关键词： solid oxide fuel cell anode degradation focused ion beam-scanning electron microscopy lattice Boltzmann method

Enhanced removal of antibiotic resistance genes during chicken manure composting after combined inoculation of Bacillus subtilis with biochar

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第1期135卷 274-284页

作者： zewen wu Luan zhang hao Lin Shungui zhou Fujian Provincial Key Laboratory of Soil Environmental Health and Regulation College of Resources and EnvironmentFujian Agriculture and Forestry UniversityFuzhou 350002China School of Environmental Science and Engineering Hubei Key Laboratory of Mine Environmental Pollution Control and RemediationHubei Polytechnic UniversityHuangshi 435003China Fujian Provincial Key Laboratory of Eco-Industrial Green Technology Wuyi UniversityWuyishan 354300China

This study explored the combined effects of Bacillus subtilis inoculation with biochar on the evolution of bacterial communities,antibiotic resistance genes(ARGs),and mobile genetic elements(MGEs)during the composting of chicken *** results showed that *** inoculation combined with biochar increased bacterial abundance and diversity as well as prolonged the compost thermophilic *** organic matter biodegradation and facilitated the organic waste compost humification process,reduced the proliferation of ARGs by altering the bacterial *** and Actinobacteriota were the main resistant bacteria related to ARGs and *** decrease in ARGs and MGEs was associated with the reduction in the abundance of related host *** inoculation with *** and the addition of biochar could promote nutrient transformation,reduce the increase in ARGs and MGEs,and increase the abundance of beneficial soil taxa.

关键词： Antibiotic resistance gene Bacillus subtilis Bacterial community Biochar Composting

Non-adiabatic holonomic quantum operations in continuous variable systems

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第6期67卷 12-19页

作者： hao-Long zhang Yi-hao Kang Fan wu zhen-Biao Yang Shi-Biao zheng Fujian Key Laboratory of Quantum Information and Quantum Optics College of Physics and Information EngineeringFuzhou UniversityFuzhou 350116China

Quantum operations by utilizing the underlying geometric phases produced in physical systems are favoured due to their potential *** a system in a non-degenerate eigenstate undergoes an adiabatically cyclic evolution dominated by its Hamiltonian,it will get a geometric phase,referred to as the Berry *** a non-adiabatically cyclic evolution produces an Aharonov-Anandan geometric *** two types of Abelian geometric phases are extended to the non-Abelian cases,where the phase factors become matrix-valued and the transformations associated with different loops are *** and non-Abelian(holonomic)operations are prevalent in discrete variable systems,whose limited(say,two)energy levels,form the *** their developments in continuous systems have also been investigated,mainly due to that,bosonic modes(in,such as,cat states)with large Hilbert spaces,provide potential advantages in fault-tolerant quantum *** we propose a feasible scheme to realize non-adiabatic holonomic quantum logic operations in continuous variable systems with cat *** construct arbitrary single-qubit(two-qubit)gates with the combination of single-and two-photon drivings applied to a Kerr Parametric Oscillator(KPO)(the coupled KPOs).Our scheme relaxes the requirements of the previously proposed quantum geometric operation strategies in continuous variable systems,providing an effective way for quantum control.

关键词： cat qubit continuous variable systems non-Abelian