检索结果-南通市图书馆

aBIOTECH 2024年第1期5卷 1-16页

作者： Mengting Xu ziyue Sun Huanbin Shi Jiangnan Yue Xiaohui Xiong zhongling wu Yanjun Kou zeng Tao Ministry of Agriculture Key Laboratory of Molecular Biology of Crop Pathogens and Insects Institute of BiotechnologyZhejiang UniversityHangzhou 310058China State Key Lab of Rice Biology and Breeding China National Rice Research InstituteHangzhou 310021China

Di-and tri-methylation of lysine 36 on histone H3(H3K36me2/3)is catalysed by histone methyltransferase Set2,which plays an essential role in transcriptional *** there is a single H3K36 methyltransferase in yeast and higher eukaryotes,two H3K36 methyltransferases,Ash1 and Set2,were present in many filamentous ***,their roles in H3K36 methylation and transcriptional regulation remained *** with methods of RNA-seq and ChIP-seq,we revealed that both Ash1 and Set2 are redundantly required for the full H3K36me2/3 activity in Magnaporthe oryzae,which causes the devastating worldwide rice blast ***1 and Set2 distinguish genomic H3K36me2/3-marked regions and are differentially associated with repressed and activated transcription,***,Ash1-catalysed H3K36me2 was co-localized with H3K27me3 at the chromatin,and Ash1 was required for the enrichment and transcriptional silencing of H3K27me3-occupied *** the different roles of Ash1 and Set2,in H3K36me2/3 enrichment and transcriptional regulation on the stress-responsive genes,they differentially respond to various stresses in ***,we reveal a novel mechanism by which two H3K36 methyltransferases catalyze H3K36me2/3 that differentially associate with transcriptional activities and contribute to enrichment of facultative heterochromatin in eukaryotes.

关键词： Ash1 Facultative heterochromatin H3K36me2/3 Magnaporthe oryzae Set2 Transcriptional regulation

Chinese Population Reference Curves for Ultrasound-Measured Amniotic Fluid Deepest Vertical Pocket in Dichorionic Twin Pregnancies,and Their Associations With Pregnancy Outcomes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Maternal-Fetal Medicine 2024年第1期6卷 29-36页

作者： z.engxin Lyu Tianchen wu Shan Lu Pengbo Yuan Yangyu zhao Yuan Wei Department of Obstetrics and Gynecology Peking University Third HospitalBeijing 100191China

Objective:To establish the Chinese population's amniotic fluid deepest vertical pocket(DVP)reference curves for dichorionic twin pregnancies and to investigate DVP links with adverse perinatal ***:This retrospective cohort study,conducted at Peking University Third Hospital from August 2011 to December 2020,used data from 375 women aged 20 to 45 years who had dichorionic twin pregnancies that were confirmed through first-trimester *** exclusions,reference curves were developed using 318 women with 3,299 DVP scans,and the data analyzed included maternal demographics,pregnancy outcomes,ultrasound measurements,and neonatal *** were assessed via ultrasound at regular intervals and grouped by gestational age(GA)for *** mixed models were used to create amniotic fluid reference *** between abnormalities and adverse perinatal outcomes were examined using Chi-squared or Fisher's exact *** regression provided both crude and adjusted odds ratios,adjusting for pre-pregnancy weight,age,ethnicity,parity,and conception *** was set at Pence intervals(CI),and the analyses were conducted using SPSS ver.26.0(IBM Corp.,Armonk,NY)and SAS ver.9.4(SAS Institute Inc.,Cary,NC,USA)***:DVP increased from the first trimester to a maximum at 26 weeks(95%confidence interval(CI),2.7–8.3 cm for twin 1 and 2.8–7.9 cm for twin 2)and then decreased gradually toward *** between twins 1 and 2 were significant after 26 weeks(95%CI for twin 1:5.3,5.5;95%CI for twin 2:4.4,4.5;Pensive disorder complicating pregnancy,and premature rupture of ***:Reference curves

关键词： Amniotic fluid Amniotic fluid deepest vertical pocket Reference curve Dichorionic twin Pregnancy outcome Ultrasound examination

Introduction of rare-earth element Sc in alloy design to modify wear features of dual-phase high-entropy alloy

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 817-828页

作者： Hao Ren Rui-Run Chen Xue-Feng Gao Tong Liu Gang Qin Yu-Lung Chiu Shi-Ping wu Jing-Jie Guo Guo National Key Laboratory for Precision Hot Processing of Metals School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin150001China School of Metallurgy and Materials University of BirminghamBirminghamB152TTUK

Tailoring the alloy composition,which induces the hard secondary phase to increase hardness and strength to improve the wear features,is a feasible approach for developing wear-resistant metal ***,a group of(AlCoCrFeni)_(100–x)Sc_(x)(x=0–2.0,at%)high-entropy alloys(HEAs)are designed and the phase compositions and wear behaviors are ***-doped HEA series contain the primary body-centered cubic(BCC)and eutectic phases,in which the eutectic phase is composed of the alternately grown BCC and Laves *** addition promotes the diffusion of Ni atoms from BCC phase to form the Sc-rich Laves phase at the grain *** hardness increases due to solid solution strengthening and second phase *** the second phase strengthening plays a more significant role relative to solid solution *** phase and the oxides caused by wear heating prevent the direct contact between friction pair and HEAs,thus inducing a decreased wear rate from 6.82×10^(−5) to 3.47×10^(−5)m^(3)·N^(−1)·m^(−1).Moreover,the wear mechanism changes from adhesive wear,abrasive wear and oxidative wear to abrasive wear and oxidative wear.

关键词： High entropy alloy(HEA) Laves phase Hardness Wear mechanism

Investigation of the Effect of the Force Arm on the Bending Capability of Prestressed Glulam Beam

在线全文

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2024年第5期18卷 641-661页

作者： Yan zhao Yuanyuan wu Shengliang He z.englu Gao ziyan Huang Chenz.eng Lv Department of Civil engineering and Architecture Wuyi UniversityWuyishan354300China Experimental Forest Farm in Qingyuan County Lishui323000China Fujian zhuanghe Bamboo Industry Technology Co. Ltd.Nanping353000China Fujian Liuz.eng New Materials Technology Co. Ltd.Nanping353000China

Prestress enables the Glulam beam could make full use of the compression strength,and then increase the span,but it still could not reduce all drawbacks,such as cross-section weakening and small force *** avoid slotting and ensure suitable tension and compression couple,one kind of novel anchor has been proposed,which could meet the bearing capacity *** then the bending test of prestressed Glulam beams with a geometric scale ratio of 1:2 was simulated,to investigate the effect of the force arm on bending capacities,failure modes,and deformation *** show that increasing the force arm could improve the ultimate bending per-formance of the beam signiﬁcantly,and the anchor arm length has a certain effect on the performance,but it is not ***,based on Finite element method analysis,the practice design suggestions have been offered.

关键词： Force arm prestressed Glulam beam ﬁnite element method bearing capacity

enhanced direct gaseous CO_(2) fixation into higher bio-succinic acid production and selectivity

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第9期143卷 164-175页

作者： ziyi Yang Wanling wu Qing zhao Irini Angelidaki Samuel Gyebi Arhin Dongliang Hua Yuxiao zhao Hangyu Sun Guangqing Liu Wen Wang Biomass energy and environmental engineering Research Center Beijing University of Chemical TechnologyBeijing 100029China College of Chemical engineering Beijing University of Chemical TechnologyBeijing 100029China Department of Chemical and Biochemical environmental engineering Technical University of DenmarkDK-2800Kgs LyngbyDenmark energy Research Institute Qilu University of Technology(Shandong Academy of Sciences)Shandong Provincial Key Laboratory of Biomass Gasification TechnologyJinan 250014China

Utilizing CO_(2)for bio-succinic acid production is an attractive approach to achieve carbon capture and recycling(CCR)with simultaneous production of a useful platform *** succinogenes and Basfia succiniciproducens were selected and investigated as microbial ***,the type and concentration of inorganic carbon concentration and glucose concentration were evaluated.6 g C/L MgCO_(3)and 24 g C/L glucose were found to be the optimal basic operational conditions,with succinic acid production and carbon yield of over 30 g/L and over 40%,***,for maximum gaseous CO_(2)fixation,carbonate was replaced with CO_(2)at different ***“less carbonate more CO_(2)”condition of the inorganic carbon source was set as carbonate:CO_(2)=1:9(based on the mass of carbon).This condition presented the highest availability of CO_(2)by well-balanced chemical reaction equilibrium and phase equilibrium,showing the best performance with regarding CO_(2)fixation(about 15 mg C/(L·hr)),with suppressed lactic acid *** to key enzymes analysis,the ratio of phosphoenolpyruvate carboxykinase to lactic dehydrogenase was enhanced at high ratios of gaseous CO_(2),which could promote glucose conversion through the succinic acid *** further increase gaseous CO_(2)fixation and succinic acid production and selectivity,stepwise CO_(2)addition was evaluated.50%-65%increase in inorganic carbon utilization was obtained coupled with 20%-30%increase in succinic acid *** was due to the promotion of the succinic acid branch of the glucose metabolism,while suppressing the pyruvate branch,along with the inhibition on the conversion from glucose to lactic acid.

关键词： Succinic acid CO_(2) fixation Actinobacillus succinogenes Basfia succiniciproducens Lactic acid

Microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents during heat treatments

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1786-1792页

作者： Yuan-Feng Xie Xing-Cheng Xie zhong-wu Li Rui-Jun Cao zhong-Kun Lin Qing Li Chen-Guang Lin Powder Metallurgy and Special Materials Research Department General Research Institute for Nonferrous MetalsBeijing100088China

The effects of cryogenic treatment(CT)and tempering-cryogenic treatment(TCT)on the microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents were *** binder phase,WC mean grain sizes,W solubility in the binder,relative magnetic s aturation,densities,hardness,wear resistance and second phase precipitation of cemented carbides with different heat treatments were *** results show that there are significant changes of microstructure and properties in the samples with CT and TCT,especially due to the precipitation of metastable nanoparticles W_(x)Co_(y)C_(z) in the binder during the heat treatments of CT and *** the simultaneous combination of microstructure and nanoparticle-reinforced binder,a dramatically improved combination of hardness and wear resistance of the samples after TCT has been achieved.

关键词： Cryogenic treatment Tempering Coarsegrained cemented carbide Carbon content Nanoparticlereinforced binder

Manipulating Na occupation and constructing protective film of P2-Na_(0.67)Ni_(0.33)Mn_(0.67)O_(2) as long-term cycle stability cathode for sodium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第1期88卷 603-611,I0013页

作者： Yiran Sun Pengfei zhou Siyu Liu zhongjun zhao Yihao Pan Xiangyan Shen Xiaozhong wu Jinping zhao Junying Weng Jin zhou School of Chemistry and Chemical engineering Shandong University of TechnologyZibo 0255000ShandongChina School of Materials Science and engineering Shandong University of TechnologyZibo 255049ShandongChina

P2-Na_(0.67)Ni_(0.33)Mn_(0.67)O_(2)(NNMO)is promising cathode material for sodium-ion batteries(SIBs)due to its high specific capacity and fast Na+diffusion ***,the irreversible P2-O_(2)phase transformation,Na+/vacancy ordering,and transition metal(TM)dissolution seriously damage its cycling stability and restrict its commercialization ***,Na occupation manipulation and interface stabilization are proposed to strengthen the phase structure of NNMO by synergistic zn/Ti co-doping and introducing lithium difluorophosp(LiPO_(2)F_(2))film-forming electrolyte *** zn/Ti co-doping regulates the occupancy ratio of Nae/Nafat Na sites and disorganizes the Na+/vacancy ordering,resulting in a faster Na+diffusion kinetics and reversible P2-z phase transition for P2-Na_(0.67)Ni_(0.28)zn_(0.05)Mn_(0.62)Ti_(0.05)O_(2)(NNzMTO).Meanwhile,the LiPO_(2)F_(2)additive can form homogeneous and ultrathin cathode-electrolyte interphase(CEI)on NNzMTO surface,which can stabilize the NNzMTO-electrolyte interface to prevent TM dissolution,surface structure transformation,and micro-crack *** studies of in situ and ex situ characterizations and theoretical calculations were used to elucidate the storage mechanism of NNzMTO with Li PO_(2)F_(2)*** a result,the NNzMTO displays outstanding capacity retention of 94.44%after 500 cycles at 1C with 0.3 wt%Li PO_(2)F_(2),excellent rate performance of 92.5 mA h g^(-1)at 8C with 0.1 wt%Li PO_(2)F_(2),and remarkable full cell *** work highlights the important role of manipulating Na occupation and constructing protective film in the design of layered materials,which provides a promising direction for developing high-performance cathodes for SIBs.

关键词： Layered cathode zn/Ti co-doping Na occupation Electrolyte additive Sodium-ion batteries

Lightweight,Strong and High Heat-Resistant Poly(lactide acid)Foams via Microcellular Injection Molding with Self-Assembly Nucleating Agent

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第6期42卷 739-750页

作者： Xiao-Hu Bing Wen-Yu Ma Ming-Hui wu Peng Gao Xiao zhou Hai-Bin Luo Long Wang Wen-Ge z.eng School of materials Science and engineering Shanghai UniversityShanghai200444China Ningbo Key Lab of Polymer Materials Ningbo Institute of Material Technology and EngineeringChinese Academy of SciencesNingbo315201China University of Chinese Academy of Sciences Beijing100049China

Poly(lactide acid)(PLA)foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams,such as polystyrene(PS)***,PLA foam typically suffers from low heat-resistance and poor cellular structure stemming from its inherent slow crystallization rate and low melt *** this study,a high-performance PLA foam with well-defined cell morphology,exceptional strength and enhanced heat-resistance was successfully fabricated via a core-back microcellular injection molding(MIM)*** scanning calorimetry(DSC)results revealed that the added hydrazine-based nucleating agent(HNA)significantly increased the crystallization temperature and accelerated the crystallization process of ***,the addition of a 1.5 wt%of HNA led to a significant reduction in PLA’s cell size,from 43.5µm to 2.87µm,and a remarkable increase in cell density,from 1.08×10^(7)cells/cm^(3)to 2.15×10^(10)cells/cm^(3).This enhancement resulted in a final crystallinity of approximately 55.7%for the PLA blend foam,a marked improvement compared to the pure PLA ***,at 1.5 wt%HNA concentration,the tensile strength and tensile toughness of PLA blend foams demonstrated remarkable improvements of 136%and 463%,***,the Vicat softening temperature of PLA blend foam increased significantly to 134.8°C,whereas the pure PLA foam exhibited only about 59.7℃.These findings underscore the potential for the preparation of lightweight injection-molded PLA foam with enhanced toughness and heat-resistance,which offers a viable approach for the production of high-performance PLA foams suitable for large-scale applications.

关键词： Poly(lactide acid) Nucleating agent Microcellular injection molding Heat-resistance Toughness

Thiol Ligand-Modified Au for Highly Efficient Electroreduction of Nitrate to Ammonia

在线全文

学校读者我要写书评

暂无评论

Precision Chemistry 2024年第3期2卷 112-119页

作者： Yuheng wu Xiangdong Kong Yechao Su Jiankang zhao Yiling Ma Tongz.eng Ji Di wu Junyang Meng Yan Liu zhigang Geng Jie zeng Hefei National Research Center for Physical Sciences at the Microscale Key Laboratory of Strongly-Coupled Quantum Matter Physics of Chinese Academy of SciencesKey Laboratory of Surface and Interface Chemistry and Energy Catalysis of Anhui Higher Education InstitutesDepartment of Chemical PhysicsUniversity of Science and Technology of ChinaHefeiAnhui 230026P.R.China School of Chemistry&Chemical engineering Anhui University of TechnologyMa’anshanAnhui 243002P.R.China

Electroreduction of nitrate(NO_(3)-)to ammonia(NH_(3))is an environmentally friendly route for NH_(3)production,serving as an appealing alternative to the Haber-Bosch ***,various noble metal-based electrocatalysts have been reported for electroreduction of NO_(3)-.However,the application of pure metal electrocatalysts is still limited by unsatisfactory performance,owing to the weak adsorption of nitrogen-containing intermediates on the surface of pure metal *** this work,we report thiol ligand-modified Au nanoparticles as the effective electrocatalysts toward electroreduction of NO_(3)-.Specifically,three mercaptobenzoic acid(MBA)isomers,thiosalicylic acid(ortho-MBA),3-mercaptobenzoic acid(meta-MBA),and 4-mercaptobenzoic acid(para-MBA),were employed to modify the surface of the Au *** the NO_(3)-electroreduction,para-MBA modified Au(denoted as para-Au/C)displayed the highest catalytic activity among these Au-based ***-1.0 V versus reversible hydrogen electrode(vs RHE),para-Au/C exhibited a partial current density for NH_(3)of 472.2 mA cm^(-2),which was 1.7 times that of the pristine Au ***,the Faradaic efficiency(FE)for NH_(3)reached 98.7%at-1.0 V vs RHE for para-Au/*** modification of para-MBA significantly improved the intrinsic activity of the Au/C catalyst,thus accelerating the kinetics of NO_(3)-reduction and giving rise to a high NH_(3)yield rate of para-Au/C.

关键词： Ammonia synthesis NO_(3)-electroreduction Au nanoparticles thiol ligand modification electronic structure

A 128×128 SPAD LiDAR sensor with column-parallel 25 ps resolution TA-ADCs

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第8期45卷 34-40页

作者： Na Tian zhe Wang Kai Ma Xu Yang Nan Qi Jian Liu Nanjian wu Runjiang Dou Liyuan Liu State Key Laboratory of Superlattices and Microstructures Institute of SemiconductorsChinese Academy of SciencesBeijing 100049China Center of Materials Science and Optoelectronics engineering University of Chinese Academy of SciencesBeijing 100049China

This paper presents a design of single photon avalanche diode(SPAD)light detection and ranging(LiDAR)sensor with 128×128 pixels and 128 column-parallel time-to-analog-merged-analog-to-digital converts(TA-ADCs).Unlike the conventional TAC-based SPAD LiDAR sensor,in which the TAC and ADC are separately implemented,we propose to merge the TAC and ADC by sharing their capacitors,thus avoiding the analog readout noise of TAC’s output buffer,improving the conversion rate,and reducing chip *** reverse start-stop logic is employed to reduce the power of the *** in a 180 nm CMOS process,our prototype sensor exhibits a timing resolution of 25 ps,a DNL of+0.30/−0.77 LSB,an INL of+1.41/−2.20 LSB,and a total power consumption of 190 mW.A flash LiDAR system based on this sensor demonstrates the function of 2D/3D imaging with 128×128 resolution,25 kHz inter-frame rate,and sub-centimeter ranging precision.

关键词： 3D imaging CMOS imagers direct time-of-flight(dTOF) time-to-analog converter(TAC)