检索结果-南通市图书馆

Nano Research 2016年第3期9卷 633-643页

作者： Sangbaek Park Hyun-Woo Shim chan Woo Lee Hee Jo Song Jae-chan kim Dong-Wan kim Department of Materials Science and Engineering Seoul National University Seoul 151-744 Republic of Korea School of Civil Environmental and Architectural Engineering Korea University Seou1136-713 Republic of Korea

We report the facile, one-pot synthesis of 3-D urchin-like W18O49 nanostructures （U-WO） via a simple solvothermal approach. An excellent supercapacitive performance was achieved by the U-WO because of its large Brunauer-Emmett- Teller （BET） specific surface area （ca. 123 m2.g-1） and unique morphological and structural features. The U-WO electrodes not only exhibit a high rate-capability with a specific capacitance （Csp） of -235 F·g-1 at a current density of 20 A.g-1, but also superior long-life performance for 1,000 cycles, and even up to 7,000 cycles, showing -176 F·g-1 at a high current density of 40 A.g-1.

关键词： hierarchical structure W18O49 high-power long cycle life supercapacitor

Corrosion characteristics of single-phase Mg-3Zn alloy thin film for biodegradable electronics

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2023年第9期11卷 3241-3254页

作者： Ji-Woo Gu Jae-young Bae Guangzhe Li Hae Won Hwang So-Hyeon Lee Sung-Geun Choi Ju-young kim Myoung-Ryul Ok Yu-chan kim Seung-Kyun Kang Department of Materials Science and Engineering Seoul National University(SNU)Seoul 08826Republic of Korea Research Institute of Advanced Materials(RIAM) Seoul National UniversitySeoul 08826Republic of Korea Soft Foundry Nano Systems Institute(NSI) Seoul National UniversitySeoul 08826Republic of Korea Biomaterials Research Center Biomedical Research DivisionKorea Institute of Science and Technology(KIST)Seoul 34141Republic of Korea Division of Bio-Medical Science and Technology KIST SchoolKorea University of Science and TechnologySeoul 02792Republic of Korea Department of Materials Science and Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea

Biodegradable metals as electrodes, interconnectors, and device conductors are essential components in the emergence of transient electronics, either for passive implants or active electronic devices, especially in the fields of biomedical electronics. Magnesium and its alloys are strong candidates for biodegradable and implantable conducting materials because of their high conductivity and biocompatibility, in addition to their well-understood dissolution behavior. One critical drawback of Mg and its alloys is their considerably high dissolution rates originating from their low anodic potential, which disturbs the compatibility to biomedical applications. Herein, we introduce a single-phase thin film of a Mg-Zn binary alloy formed by sputtering, which enhances the corrosion resistance of the device electrode, and verify its applicability in biodegradable electronics. The formation of a homogeneous solid solution of single-phase Mg-3Zn was confirmed through X-ray diffraction and transmission electron microscopy. In addition, the dissolution behavior and chemistry was also investigated in various biological fluids by considering the effect of different ion species. Micro-tensile tests showed that the Mg-3Zn alloy electrode exhibited an enhanced yield strain and elongation in relation to a pure Mg electrode. Cell viability test revealed the high biocompatibility rate of the Mg-3Zn binary alloy thin film. Finally, the fabrication of a wireless heater demonstrated the integrability of biodegradable electrodes and highlighted the ability to prolong the lifecycle of thermotherapy-relevant electronics by enhancing the dissolution resistance of the Mg alloy.

关键词： Biodegradable alloy Mg-3Zn binary alloy Solid-solution thin film electrode Biodegradable conductor Transient electronics

1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第2期97卷 10-19页

作者： young-Kyun kim Min-Chul kim Kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea Korea Atomic Energy Research Institute(KAERI) Daejeon 34057Republic of Korea

CrMnFeCoNi high-entropy alloys(HEAs)exhibit an excellent combination of tensile strength and ductility at cryogenic *** study led to the introduction of a new method for the development of high-performance CrMnFeCoNi HEAs at cryogenic temperatures by jointly utilizing additive manufacturing(AM)and the addition of interstitial *** interstitial oxygen present in the powder feedstock was transformed into beneficial nano-sized oxides during AM *** HEA nanocomposite fabricated using laser powder bed fusion(L-PBF)not only contains heterogeneous grains and substructures but also a high number density of nano-sized *** tensile results revealed that the L-PBF HEA nanocomposite has superior yield strengths of 0.77 GPa and 1.15 GPa,and tensile strengths of 0.92 GPa and 1.45 GPa at 298 K and 77 K,*** addition,the Charpy impact energies of the samples tested at 298 K and 77 K were measured as 176.2 J and 103.7 J,*** results indicate that the L-PBF HEA nanocomposite successfully overcomes the well-known strength-toughness *** tensile deformation microstructure contained a relatively large number of deformation twins(DTs)at cryogenic temperature,a possible consequence of the decrease in the stacking fault energy with decreasing *** the other hand,cracks were found to propagate along the grain boundaries at room temperature,whereas a transgranular crack was observed at cryogenic temperature in the specimens fractured as a result of the Charpy impact.

关键词： Laser powder bed fusion High-entropy alloy matrix nanocomposite Nano-oxide:cryogenic Tensile Impact toughness

Tetradentate Pt(Ⅱ)complex as a singlet exciton sensitizing host for highly efficient green fluorescent organic light-emitting diodes

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第8期67卷 2618-2627页

作者： Unhyeok Jo Seung chan kim chan Hee Ryu Kang Mun Lee Jae-Min kim Jun Yeob Lee School of Chemical Engineering Sungkyunkwan University2066Seobu-roJangan-guSuwon-siGyeonggi-do 16419Republic of Korea Department of Chemistry Institute for Molecular Science and Fusion TechnologyKangwon National UniversityChuncheonGangwon 24341Republic of Korea Department of Advanced Materials Engineering Chung-Ang University4726Seodong-daeroDaedeok-myeonAnseong-siGyeonggi-do 17546Republic of Korea SKKU Advanced Institute of Nano Technology Sungkyunkwan University2066Seobu-roJangan-guSuwonGyeonggi 16419Republic of Korea SKKU Institute of Energy Science and Technology Sungkyunkwan University2066Seobu-roJangan-guSuwonGyeonggi 16419Republic of Korea

Efficient green fluorescent organic light-emitting diodes were designed with a phosphorescent metal complex as a singlet exciton sensitizing host(SESH)for achieving high efficiency and low efficiency roll-off through exciton and polaron *** Pt(Ⅱ)complex(Pt-Trz)possessing a tetradentate ligand with a bulky blocking group not only suppresses the severe formation of excimer or dimer itself but also transfers radiative excitons to fluorescent dopant *** SESH assisted fluorescence(SESHF)device with Pt-Trz as the host exhibits the maximum external quantum efficiency of 13.3%and a lower efficiency roll-off compared with exciplex host device which is a general approach for harvesting triplet *** exciton dynamics modeling unravels that the SESHF device effectively utilizes triplet excitons in the host by intersystem crossing and resonance energy transfer from the triplet state of the host to the singlet state of the terminal *** quenching rates of the SESHF device are reduced by 11 times for triplet-triplet annihilation and 1.8 times for tripletpolaron annihilation compared with the exciplex device,which demonstrates that Pt-Trz could be a platform to be used as an efficient host for fluorophores.

关键词： singlet annihilation polaron

Evaluation the Properties of Titanium Matrix Composites by Melting Route Synthesis

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2008年第1期24卷 105-109页

作者： Bong-Jae Choi Si-young Sung Myoung-Gyun kim young-Jig kim Department of Advanced Materials Engineering Sungkyunkwan University SuwonKorea Department of Advanced Materials Engineering Sungkyunkwan University SuwonKorea Materials & Processing Engineering CenterR&D DivisionKorea Automotive Technology InstituteChonanChungnamKorea Research Institute of Industrial Science and Technology Pohang Korea

The main purpose of this study is an in-situ synthesis of （TiB＋TiC） hybrid titanium matrix composites （TMCs） by vacuum induction melting method and to verify its mechanical *** melting route was adopted to synthesize the commercial pure titanium （cp Ti） and granular boron carbide （B-4C）.The reinforcements,the fraction of 10 ***,were formed by adding 1.88 wt pct B-4C to cp *** in-situ synthesis of TMCs,electron probe micro-analysis elemental mapping was carried out to confirm the distribution and shape of *** cone-on-disk type sliding wear test was also done for the identification of *** is concluded that （TiB＋TiC） hybrid TMCs can be in-situ synthesized and has better wear properties than H13.

关键词： Titanium matrix composites H13 In-situ Wear

Programmed death ligand-1 expression and its prognostic role in esophageal squamous cell carcinoma

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2016年第37期22卷 8389-8397页

作者： Ryul kim Bhumsuk Keam Dohee Kwon chan-young Ock Miso kim Tae Min kim Hak Jae kim Yoon Kyung Jeon In Kyu Park chang Hyun Kang Dong-Wan kim young Tae kim Dae Seog Heo Department of Internal Medicine Seoul National University HospitalSeoul 03080South Korea Cancer Research Institute Seoul National University College of MedicineSeoul 03080South Korea Department of Pathology Seoul National University HospitalSeoul 03080South Korea Department of Radiation Oncology Seoul National University HospitalSeoul 03080South Korea Department of Thoracic and Cardiovascular Surgery Seoul National University HospitalSeoul 03080South Korea

AIM To investigate the expression and prognostic role of programmed death ligand-1(PD-L1) in locally advanced esophageal squamous cell carcinoma(ESCC).METHODS A total of 200 patients with ESCC who underwent radical esophagectomy with standard lymphadenectomy as the initial definitive treatment in Seoul National University Hospital from December 2000 to April 2013 were eligible for this analysis. Tissue microarrays were constructed by collecting tissue cores from surgical specimens, and immunostained with antibodies directed against PD-L1, p16, and c-Met. Medical records were reviewed retrospectively to assess clinical outcomes. Patients were divided into two groups by PD-L1 status, and significant differences in clinicopathologic characteristics between the two groups were assessed. RESULTS Tumor tissues from 67 ESCC patients(33.5%) were PDL1-positive. Positive p16 expression was observed in 21 specimens(10.5%). The H-score for c-Met expression was ≥ 50 in 42 specimens(21.0%). Although PDL1-positivity was not significantly correlated with any clinical characteristics including age, sex, smoking/alcoholic history, stage, or differentiation, H-scores for c-Met expression were significantly associated with PDL1-positivity(OR = 2.34, 95%CI: 1.16-4.72, P = 0.017). PD-L1 expression was not significantly associated with a change in overall survival(P = 0.656). In contrast, the locoregional relapse rate tended to increase(P = 0.134), and the distant metastasis rate was significantly increased(HR = 1.72, 95%CI: 1.01-2.79, P = 0.028) in patients with PD-L1-positive ESCC compared to those with PD-L1-negative *** PD-L1 expression is positively correlated with c-Met expression in ESCC. PD-L1 may play a critical role in distant failure and progression of ESCC.

关键词： Esophageal neoplasm Programmed death ligand-1 protein c-Met protein Prognosis p16INK4A protein

2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2021年第7期66卷 36-45页

作者： young-Kyun kim Kyu-Sik kim young-Beum Song Jung Hyo Park Kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon22212Republic of Korea Agency for Defense Development(ADD) Yuseong-guDaegeon34186Republic of Korea

This study investigated the effect of multi-step heat treatment on the microstructure, mechanical properties and fracture behavior of thick 15 Co-12 Ni secondary hardening steel. As-quenched sample was found to have elongated prior austenite grain(PAG) and coarse lenticular martensitic structure. On the other hand, heat-treated sample was observed to have fine lenticular martensitic structure due to fine PAG size and a lot of nano-sized carbides. Also, after heat treatment, nano-scale reverted austenite film was formed at the martensite interfaces. The heat-treated sample showed 2.47 GPa superior tensile strength and superior elongation of about 12 %. The high strength was mainly due to fine block size and high number density of nano-sized carbides. The average value of plane strain fracture toughness(KIC) was 29.3 MPa m1/2, which indicated a good fracture toughness even with the high tensile strength. The tensile fracture surface was observed to have ductile fracture mode(cup-and-cone) and the formation of about ~1 μm ultra-fine dimples. In addition to this, nano-sized carbides were observed within the *** findings suggested that the nano-sized carbide had a positive effect not only on the strength but also on the ductility of the alloy. The fractured surface after toughness test, also showed ductile fracture mode with a lot of dimples. Based on the above results, correlation among microstructural evolution,deformation and fracture mechanisms along the heat-treatment was also discussed.

关键词： Ultra-high strength High Co-Ni secondary hardening steel Microstructure Tensile properties Fracture toughness Reverted austenite

Weldability evaluation and tensile strength estimation model for aluminum alloy lap joint welding using hybrid system with laser and scanner head

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 596-604页

作者： Dong-Yoon kim young-Whan PARK Department of Mechanical Engineering Pukyong National University

Aluminum welding using a hybrid system with a laser and scanner welding head was performed under various welding conditions to verify the feasibility of applying an aluminum alloy to a car *** experimental material was 5J32 aluminum alloy,and the laser power,welding speed,and laser incidence angle were used as the control *** weld bead shape and the tensile shear strength were evaluated in order to understand the aluminum lap joint weld *** of variance (ANOVA) was conducted to identify the effect of the process variables on the tensile shear *** strength estimation models using three different regression models were also *** input variables were the laser power,welding speed,and laser incidence angle,and the output was the tensile shear *** the models,the second-order polynomial estimation model had the best estimation performance,and the average error rate of this model was 0.058.

关键词： laser welding scanner remote welding 5J32 aluminum alloy regression model

Effect of Plastic Anisotropy on the Formability of Aluminum 6016-T4 Sheet Material

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2017年第3期30卷 625-631页

作者： young-Suk kim Seung-Han YANG kyungpook national university Daegu 41566Republic of Korea

Sheet metal formed of lightweight materials such as aluminum sheeting has received great attention related to the reduction of vehicle emissions. This paper evaluates the anisotropic yield locus using Kuwabara＇s biaxial tensile tester and stretches formability using Hecker＇s hemispheri- cal punch stretching test for aluminum 6016-T4 sheet material. The anisotropic yield locus of the A16016-T4 sheet measured is fitted well by the modified Drucker yield func- tion. Moreover the best fitting to the experimental stress- strain curve from the tensile test was obtained by taking an appropriate hardening model. Analytical study to predict the stretch formability by using Hora＇s Modified Maximum Force Criterion （MMFC） was performed. The predicted forming limit curves （FLC） based on various yield functions were compared with the experiments and discussed.

关键词： Anisotropic yield function AluminumA16016-T4 Biaxial tensile test Forming limit curve

Effects of foundation damage and water-level change on vibration modal parameters of gravity-type caisson structure

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2015年第2期58卷 316-329页

作者： LEE So-young kim Jeong-Tae Department of Ocean Engineering Pukyong National University

In this paper,the effects of foundation damage and water-level change on vibration characteristics of gravity-type caisson structure are examined by analyzing modal parameters extracted from output-only *** achieve the objective,the following approaches are ***,vibration response analysis methods are selected to estimate power spectral density and modal parameters such as natural frequency,damping ratio and mode shape of a lab-scale caisson structural ***,vibration tests on the lab-scale caisson system are performed under a series of test scenarios which include three water-level changes and three damage ***,experimental modal parameters corresponding to the damaging cases as well as the water level cases are extracted by frequency domain decomposition method and stochastic subspace identification ***,the effects of the water-level variation and foundation damage on the extracted modal parameters are examined to assess the feasibility of the vibration-based damage detection in gravity-type caisson structures under water-level uncertainty.

关键词： caisson structure gravity-type structure modal parameter effect of water-level foundation damage