检索结果-南通市图书馆

Development of polyimide films reinforced with boron nitride and boron nitride nanosheets for transparent flexible device applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2018年第5期11卷 2366-2378页

作者： you jin min Kyeong-Hee Kang Dae-Eun Kim Department of Mechanical Engineering Yonsei University 50 Yonsei-ro Seodaemun-gu Seoul 03722 Republic of Korea

The benefits of reinforcing polyimide （PI） films with boron nitride （BN） particles and boron nitride nanosheets （BNNSs） were assessed with the aim of enhancing their thermal, optical, and mechanical properties for flexible device applications. BNNSs were prepared from BN particles using a liquid-phase exfoliation method assisted by an ultrasonic probe-type sonicator and centrifugator. PI-based composite films blended with BNNSs and BN particles were fabricated at various concentrations via mechanical stirring and spin coating. The transparency of the PI/BNNS composite films remained almost the same as that of pure PI films up to 3 wt.% whereas the transparency of the PI/BN composite films decreased with increasing concentration of the BN fillers at 550 nm. The thermal stability improved significantly with increasing concentrations of both BN and BNNS relative to that of pure PI films. The temperature for 5% weight loss of the PI/BNNS composite film was higher than that of the PI/BN composite film at the same filler concentration. The composite films with 2 wt.% BN or BNNS showed the lowest wear rate, and the PI/BNNS composite films showed more stable frictional behavior compared to the PI/BN composite films. In addition, bending tests showed that the PI/BNNS composite films exhibited excellent flexibility compared to the PI/BN composite films. Overall, the results indicate that the BNNS can be effectively used as a filler that can enhance the thermal and mechanical properties of polymer materials for flexible device applications.

关键词： polyimide (PI) boron nitride (BN) transparency thermal properties flexibility tribology

Chemical and mechanical properties of stainless, environment-friendly, and nonflammable Mg alloys (SEN alloys): A review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 841-872页

作者： Jong Un Lee Hyun Ji Kim Sang-Cheol jin Ye jin Kim young min Kim Bong Sun you Jun Ho Bae Sung Hyuk Park Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Metallurgical Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Missile Research Institute Agency for Defense DevelopmentDaejeon 34060Republic of Korea

This review article provides overall understanding of stainless,environment-friendly,and nonflammable Mg alloys(SEN alloys)recently developed at the Korea Institute of Materials *** alloys are produced by adding small amounts of Ca and Y(eachminor amounts of Ca and Y renders excellent mechanical properties due to improved strengthening *** enhanced properties are attributed to more pronounced dynamic recrystallization and grain refining behaviors caused by the second-phase particles during extrusion.(4)Despite the presence of various types of second-phase particles,the fatigue properties of SEN9 alloys are similar to those of commercial AZ91 alloys.(5)Simultaneous introduction of Ca and Y suppresses the formation of Mg17Al12 discontinuous precipitates during aging,leading to the enhanced elongation of aged SEN alloys.(6)Adding mischmetal into the SEN9 alloy leads to a six-fold enhancement in ***,the studies conducted on SEN alloys demonstrate their excellent ignition and corrosion resistances and mechanical properties,which broaden the industrial applications of Mg alloys by addressing their inherent weaknesses.

关键词： SEN magnesium alloy Corrosion resistance Ignition resistance Mechanical properties Extrudability.

Effects of vitamin family members on insulin resistance and diabetes complications

在线全文

学校读者我要写书评

暂无评论

World Journal of Diabetes 2024年第3期15卷 568-571页

作者： Hong-jin Chen min Wang Ding-min Zou Gui-you Liang Si-Yuan Yang Division of Cardiac Surgery Guizhou Institute of Precision MedicineThe Affiliated Hospital of Guizhou Medical UniversityGuiyang 550009Guizhou ProvinceChina Translational Medicine Research Center Guizhou Medical UniversityGuiyang 550025Guizhou ProvinceChina School of Basic Medical Sciences/School of Biology and Engineering Guizhou Medical UniversityGuiyang 550025Guizhou ProvinceChina

The following letter to the editor highlights the article“Effects of vitamin D supplementation on glucose and lipid metabolism in patients with type 2 diabetes mellitus and risk factors for insulin resistance”in World J Diabetes 2023 Oct 15;14(10):*** is necessary to explore the role of vitamin family members in insulin resistance and diabetes complications.

关键词： Vitamin Insulin resistance Diabetes complications Letter

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

基于舒适性和轮胎动载的车辆悬架参数优化

中国公路学报 2007年第1期20卷 112-117页

作者：吕彭民和丽梅尤晋闽长安大学道路施工技术与装备教育部重点实验室陕西西安710064 西安交通大学机械工程学院陕西西安710049

为了改善汽车行驶的舒适性并减小轮胎对路面的动载,以某载货汽车为研究对象,建立了多目标优化模型,并采用统一目标函数法对车辆悬架参数进行优化。优化结果表明:优化后悬架刚度减小而阻尼增大,且前悬架参数变化较小,后悬架参数变化较大... 详细信息

为了改善汽车行驶的舒适性并减小轮胎对路面的动载,以某载货汽车为研究对象,建立了多目标优化模型,并采用统一目标函数法对车辆悬架参数进行优化。优化结果表明:优化后悬架刚度减小而阻尼增大,且前悬架参数变化较小,后悬架参数变化较大;相比于优化前,车身垂直方向加速度均方根值减小了20%,前轮动载均方根值减小了40%,后轮变化更显著,减小了49%;采用多目标优化设计方法不仅可提高车辆自身的舒适性,而且可减小轮胎对路面的动载。

关键词：汽车工程车辆悬架统一目标函数法参数优化舒适性轮胎动载

Construction of a High‑Performance Composite Solid Electrolyte Through In‑Situ Polymerization within a Self‑Supported Porous Garnet Framework

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第5期16卷 56-70页

作者： An‑Giang Nguyen min‑Ho Lee Jaekook Kim Chan‑jin Park Department of Materials Science and Engineering Chonnam National University77 Yongbong‑roBuk‑guGwangju 61186South Korea

Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).However,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for *** overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the *** synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room ***,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode *** synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V ***/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.

关键词： Scalable tape-casting method Self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12) Composite solid electrolyte LiF-and B-rich interphase layers

High-power,electrically-driven continuous-wave 1.55-μm Si-based multi-quantum well lasers with a wide operating temperature range grown on wafer-scale InP-on-Si(100)heterogeneous substrate

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第8期13卷 1512-1523页

作者： Jialiang Sun Jiajie Lin min Zhou Jianjun Zhang Huiyun Liu Tiangui you Xin Ou National Key Laboratory of Materials for Integrated Circuits Shanghai Institute of Microsystem and Information TechnologyCASShanghai 200050China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences100049 BeijingChina College of Information Science and Engineering Jiaxing UniversityJiaxing 314001China Beijing National Laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of Sciences100190 BeijingChina Department of Electronic and Electrical Engineering University College LondonLondon WC1E 7JEUK

A reliable,efficient and electrically-pumped Si-based laser is considered as the main challenge to achieve the integration of all key building blocks with silicon *** the impressive advances that have been made in developing 1.3-μm Si-based quantum dot(QD)lasers,extending the wavelength window to the widely used 1.55-μm telecommunication region remains *** this study,we develop a novel photonic integration method of epitaxial growth of III-V on a wafer-scale InP-on-Si(100)(InPOS)heterogeneous substrate fabricated by the ion-cutting technique to realize integrated lasers on Si *** ion-cutting plus epitaxial growth approach decouples the correlated root causes of many detrimental dislocations during heteroepitaxial growth,namely lattice and domain *** this approach,we achieved state-of-the-art performance of the electrically-pumped,continuouswave(CW)1.55-μm Si-based laser with a room-temperature threshold current density of 0.65 kA/cm^(-2),and output power exceeding 155mW per facet without facet coating in CW *** lasing at 120℃ and pulsed lasing at over 130℃ were *** generic approach is also applied to other material systems to provide better performance and more functionalities for photonics and microelectronics.

关键词： pumped power quantum

Effects of low molecular weight polysaccharide from Sargassum thunbergii against palmitic acid-induced intracellular lipid accumulation in 3T3-L1 adipocyte and HepG2 cells

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年第4期13卷 2244-2252页

作者： Hyo-Geun Lee D.P.Nagahawatta M.J.M.S.Kurera Kyung-Mo Song Yun-Sang Choi you-jin Jeon min-Cheol Kang Department of Marine Life Sciences Jeju National UniversityJeju 63243Republic of Korea Department of Biotechnology Faculty of Agriculture and Plantation ManagementWayamba University of Sri LankaMakanduraGonawila(NWP)60170Sri Lanka Research Group of Food Processing Korea Food Research Institute245Wanju 55365Republic of Korea

Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on *** natures of LMPST were attained from *** and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 *** treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned *** mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis ***,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by *** these constructive properties of LMPST2 from ***,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.

关键词： Sargassum thunbergii Low molecular weight polysaccharide Lipid accumulation Obesity Liver steatosis

Adhesive hydrogel interface for enhanced epidermal signal

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2024年第10期67卷 3136-3151页

作者： SHI XinLei YU Hui TANG ZiQing LU ShaoPing you min YIN HaiYan CHEN Qiang Wenzhou Institute University of Chinese Academy of Sciences Joint Research Centre on Medicine The Affiliated Xiangshan Hospital of Wenzhou Medical University

This paper presents a discussion on the method, mechanism, and application of adhesive hydrogel in enhancing epidermal signal,focusing on the interface between hydrogel and skin. Due to its excellent conductivity and high adaptability to the skin, the hydrogel is exceptionally suitable for detecting human-machine interfaces, particularly epidermal electromyographic ***, the detection of the high epidermal signal is hindered by the gap and low adhesion between hydrogel and skin. This paper addresses these challenges by introducing approaches to reduce the interface gap and increase interface adhesion, thereby enabling the development of hydrogel-based epidermal signal detection arrays with enhanced resolution and detection performance.

关键词： adhesive hydrogel hydrogel electrodes epidermal signal interfacial adhesion

K doping stabilizes three-dimensional K0.2Na1.3Mn0.5O2-δ as high-performance cathode for sodium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5030-5038页

作者： Jia-Hao Xu you-Huan Zhu Wei-min Yang Hua Cheng Zhou-Guang Lu Industrial Training Center Shenzhen Polytechnic University Department of Materials Science and Engineering Southern University of Science and Technology School of Materials Science and Environmental Engineering Shenzhen Polytechnic University

It is a difficult challenge to simultaneously employ the cationic and anionic redox chemistry in cathode materials for sodium-ion batteries with high *** though layered oxides （classified as two-dimensional oxides） demonstrate excellent promise in the high discharge capacity,their poor oxygen transformation via redox reactions is limited by crystal ***,a doping strategy was conceived to tackle this issue and increase redox efficiency.K doping was applied to transform the two-dimensional Na1.3Mn0.7O2（NMO） to threedimensional K0.2Na1.3Mn0.5O2（KNMO）,preventing the irreversible phase shift and preserving the crystal structure’s stability while *** this modification treatment,KNMO features manganese and oxygen reactive sites,delivering a promising energy density of 190mAh·g-1at 5 mA·g-1in the 2.0–4.5 V voltage range (vs71.4 mAh·g-1for the pristine NMO).Moreover,it displays improved capacity retention of more than 83.5% after 50cycles at 50 mA·*** results demonstrated that doped intercalation oxides were promising for redox oxygen transformation in sodium-ion batteries.

关键词： High-performance cathode Metal ion dopings Sodium-ion batteries Three-dimensional structure