检索结果-南通市图书馆

Optimal‑Control‑Based Eco‑Driving Solution for Connected Battery Electric Vehicle on a Signalized Route

Automotive Innovation 2023年第4期6卷 586-596页

作者： Hafiz Muhammad yasir Naeem yasir awais butt Qadeer Ahmed Aamer Iqbal Bhatti Control and Signal Processing Research Group(CASPR) Department of Electrical EngineeringCapital University of Science and Technology(CUST)Islamabad ExpresswayKahuta RoadZone‑V IslamabadIslamabadPakistan Department of Electrical Engineering National University of Technology(NUTECH)IslamabadPakistan Center for Automotive Research Ohio State UniversityColumbusOHUSA

Speed advisory systems have been used for connected vehicles to optimize energy ***,for their practical utilization,presence of preceding vehicles and signals must be taken into ***,for Battery Electric Vehicles(BEVs),factors that deteriorate battery’s life cycle and discharging time must also be *** paper proposes an eco-driving control for connected BEV with traffic signals and other safety *** signals are considered as interior point constraints,while inter-vehicle distance with preceding vehicles,vehicle speed and battery charging/discharging limits,are considered as state safety ***-forward simulator based Speed Guidance Model is applied to follow the optimized velocity under powertrain safety *** of the proposed methodology is tested on a 5.3-km route in Islamabad,*** traffic data using Simulation of Urban Mobility under different driving scenarios is *** the proposed method,around 21% energy can be saved compared to the preceding vehicles that followed their random velocities under the same traffic and route *** means the EV controlled by the proposed method can have longer driving ***,the host BEV has crossed signals during their green time without collision with preceding *** charging rates and terminal Depth of Discharge indicate less number of charging cycles,thus proving the usefulness of the proposed solution as battery’s lifesaving strategy.

关键词： Eco-driving First-order Thevenin model Inter-vehicle safety constraint Interior point constraints

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Role of Air Staging in a Batch-Type Fixed Bed Biomass Combustor under Constant Primary Air

引用

Journal of Thermal Science 2024年第1期33卷 284-299页

作者： awais JUNEJO yasir M.AL-ABDELI Jacobo PORTEIRO School of Engineering Edith Cowan UniversityJoondalupWA 6027Australia CINTECX Universidade de Vigo Grupo de Tecnoloxia Enerxetica(GTE)36310 VigoEspana

Staged combustion of biomass is the most suitable thermo-chemical conversion for achieving lower gaseous emissions and higher fuel conversion *** a staged fixed bed combustion of biomass,combustion air is supplied in two *** the first stage,primary air is provided below the fuel,whereas in the later stage,secondary air is supplied in the freeboard *** available literature on the effects of air staging(secondary air location) at a constant primary air flow rate on combustion characteristics in a batch-type fixed bed combustor is limited and hence warrants further *** study resolves the effect of air staging,by varying the location of secondary air in the freeboard at five secondary to total air ratios in a batch-type fixed bed *** are reported for the effects of these controlled parameters on fuel conversion rate,overall gaseous emissions(CO_(2),CO and NO_x) and temperature *** fuel used throughout was densified hardwood *** show that a primary freeboard length(distance between fuel bed top and secondary air injection) of200 mm has higher fuel conversion rates and temperatures as well as lower CO emissions,at a secondary to total air ratio of 0.75 as compared to primary freeboard length of 300 ***,NO_x emissions were found to be lower for a primary freeboard length of 300 mm as compared to 200 *** increase in secondary to total air ratio from 0.33 to 0.75 resulted in higher freeboard temperatures and lower CO as well as NO_x *** outcomes of this study will be helpful in the effective design of commercial scale biomass combustors for more efficient and environmentally friendly combustion.

关键词： fixed bed combustor biomass combustion air staging freeboard temperature burning rate gaseous emissions

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

National guidelines for the diagnosis and treatment of hilar cholangiocarcinoma

引用

World Journal of Gastroenterology 2024年第9期30卷 1018-1042页

作者： Faisal Saud Dar Zaigham Abbas Irfan Ahmed Muhammad Atique Usman Iqbal Aujla Muhammad Azeemuddin Zeba Aziz Abu Bakar Hafeez Bhatti Tariq Ali Bangash Amna Subhan butt Osama Tariq butt Abdul Wahab Dogar Javed Iqbal Farooqi Faisal Hanif Jahanzaib Haider Siraj Haider Syed Mujahid Hassan Adnan Abdul Jabbar Aman Nawaz Khan Muhammad Shoaib Khan Muhammad yasir Khan Amer Latif Nasir Hassan Luck Ahmad Karim Malik Kamran Rashid Sohail Rashid Mohammad Salih Abdullah Saeed Amjad Salamat Ghias-un-Nabi Tayyab Aasim Yusuf Haseeb Haider Zia Ammara Naveed Department of Hepatopancreatic Biliary Surgery&Liver Transplant Pakistan Kidney and Liver Institute&Research CentreLahore 54000Pakistan Department of Hepatogastroenterology and Liver Transplantation Dr.Ziauddin University HospitalKarachi 75600SindhPakistan University of Aberdeen Aberdeen B243FXUnited Kingdom Department of Pathology Pakistan Kidney and Liver Institute&Research CentreLahore 54000Pakistan Department of Gastroenterology&Hepatology Pakistan Kidney and Liver Institute&Research CentreLahore 54000Pakistan Department of Radiology Aga Khan UniversityKarachi 74800Pakistan Department of Oncology Hameed Latif HospitalLahore 54000Pakistan Division of Hepatopancreatic Biliary Surgery&Liver Transplantation Shifa International HospitalIslamabad 44000Pakistan Department of Hepatopancreatic Biliary Surgery&Liver Transplant Shaikh Zayed Hospital and Post Graduate Medical InstituteLahore 54000Pakistan Department of Medicine Aga Khan University HospitalKarachi 74800Pakistan Department of Liver Transplant Pir Abdul Qadir Shah Jeelani Institute of Medical SciencesGambat 66020Pakistan Department of Medicine&Gastroenterology Lifecare Hospital and Research CentrePeshawar 25000Khyber PakhtunkhwaPakistan Department of Hepatopancreatobiliary&Liver Transplant Bahria International HospitalLahore 54000Pakistan Department of Surgery Hepatopancreatobiliary&Liver TransplantDow University of Health SciencesKarachi 74800Pakistan Department of Gastroenterology Hepatology&NutritionPir Abdul Qadir Shah Jeelani Institute of Medical SciencesGambat 66020Pakistan Department of Oncology Dr.Ziauddin HospitalKarachi 74800Pakistan Department of Radiology Rehman Medical InstitutePeshawar 25000Pakistan Army Liver Transplant Unit Pak Emirates Military HospitalRawalpindi 46000Pakistan Department of Gastroenterology Sindh Institute of Urology and TransplantationKarachi 75500Pakistan Rashid Nursing Home and Cancer Clinic Rashid Nursing Home and Cancer ClinicRawalpindi 46000Pakistan Department of Gastroentero

A consensus meeting of national experts from all major national hepatobiliary centres in the country was held on May 26,2023,at the Pakistan Kidney and Liver Institute&Research Centre(PKLI&RC)after initial consultations with the *** Pakistan Society for the Study of Liver Diseases(PSSLD)and PKLI&RC jointly organised this *** effort was based on a comprehensive literature review to establish national practice guidelines for hilar cholangiocarcinoma(hCCA).The consensus was that hCCA is a complex disease and requires a multidisciplinary team approach to best manage these *** coordinated effort can minimise delays and give patients a chance for curative treatment and effective *** diagnostic and staging workup includes high-quality computed tomography,magnetic resonance imaging,and magnetic resonance *** cytology or biopsy utilizing endoscopic retrograde cholangiopancreatography is a mainstay for ***,histopathologic confirmation is not always required before *** ultrasound with fine needle aspiration of regional lymph nodes and positron emission tomography scan are valuable adjuncts for *** only curative treatment is the surgical resection of the biliary tree based on the Bismuth-Corlette *** patients with unresectable hCCA can be considered for liver *** chemotherapy should be offered to patients with a high risk of *** use of preoperative biliary drainage and the need for portal vein embolisation should be based on local multidisciplinary *** with acute cholangitis can be drained with endoscopic or percutaneous biliary *** chemotherapy with cisplatin and gemcitabine has shown improved survival in patients with irresectable and recurrent hCCA.

关键词： Hilar cholangiocarcinoma Bismuth-Corlette classification Memorial Sloan Kettering Cancer Centre Staging Preoperative biliary drainage Portal vein embolisation Surgical resection Hepatectomy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

2D Carbon Fiber Reinforced High Density Polyethylene Multi-Layered Laminated Composite Panels:Structural,Mechanical,Thermal,and Morphological Profile

引用

Journal of Materials Science & Technology 2016年第10期32卷 1077-1082页

作者： Shahzad Maqsood Khan Nafisa Gull Muhammad Azeem Munawar Atif Islam Saba Zia Muhammad Shafiq Aneela Sabir Syed Muhammad awais Muhammad Arif butt Muhammad Taqi Zahid butt Tahir Jamil Department of Polymer Engineering and Technology University of the PunjabLahore 54590Pakistan King Edward Medical University Lahore 54590Pakistan College of Engineering and Emerging Technologies University of the PunjabLahore 54590Pakistan

Carbon fiber reinforced high density polyethylene multi-layered laminated composite panels（HDPE/CF MLCP） with excellent in-plane properties along transverse direction have been formulated. Composite architectures with carbon fiber（CF） designed in 2D layout in conventional composites can alleviate their properties in thickness direction, but all attempts so far developed have achieved restrained success. Here,we have exposed an approach to the high strength composite challenge, without altering the 2D stack design on the basis of concept of fiber reinforced laminated composites that would provide enhanced mechanical and thermal properties along transverse direction. CF sheets allowed the buckling of adjoining plies in 2D MLCP. We fabricated 2D MLCP by stacking the alternative CF and HDPE layers under different loading conditions, which resulted in high strength composites. These plies of CF and HDPE served as unit cells for MLCP, with CF offering much-needed fracture toughness and hardness to these *** 2D HDPE/CF MLCP, we demonstrated noteworthy improvement in physical and chemical interaction between CF and HDPE, in-plane fracture strain, flexural strength（30.684 MPa）, bending modulus（7436.254 MPa）, thermal stability（40.94%）, and surface morphology, upon increasing the CF layers up to twenty, enabling these composites truly for high temperature and high strength applications.

关键词： Multi-layered composite panels Mechanical properties Thermal stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development and Aging Behaviour of Solvent-Based Polychloroprene Rubber Nano-Adhesive Using Multiwall Carbon Nanotubes

引用

Journal of Materials Science and Chemical Engineering 2020年第9期8卷 31-44页

作者： Muhammad awais Muhammad Shahid Mohsin Saleem Fariz Aneeq Muhammad Shoaib butt Malik Adeel Umer School of Chemical and Materials Engineering National University of Sciences & Technology Islamabad Pakistan

Polychloroprene (PC) based contact adhesives are widely used in various applications;however, there is a possibility to improve the properties of PC adhesive. Modifications of polymers can enhance the properties of the material, e.g. increase in thermal stability, compatibility, rigidity, physical response, flexibility and improve the polymer process ability. In the current study, improved formulation of solvent-based adhesive was developed, and the properties were further enhanced by the addition of nano-reinforcement of multiwall carbon nanotubes (MWCNTs). The addition of nano-reinforcement was optimized to obtain improvement in the bond strength and also to enhance its resistance at a high temperature (~100°C). This paper discusses the uniform dispersion of MWCNTs during the synthesis of polychloroprene solvent-based adhesive, thereby improving its structural properties. Incorporation of MWCNTs-solvent-based adhesives resulted in a 20% - 35% improvement in 180° peel strength determined on flexible substrates such as canvas, leather. The reinforced based adhesive also exhibited improved thermal stability and weather resistance compared with unreinforced adhesive. The MWCNTs- solvent-based contact adhesives is a potential candidate in an industrially relevant branch of adhesives commonly used in structural applications, e.g., footwear, plastic, leather, automobile, construction industries, etc.

关键词： Nanocomposite Polychloroprene Adhesive Peel Strength Carbon Nanotubes

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tailoring microstructure and mechanical properties of aluminum matrix composites reinforced with novel Al/CuFe multi-layered core-shell particles

引用

Transactions of Nonferrous Metals Society of China 2022年第6期32卷 1822-1833页

作者： Rashid ALI Fahad ALI Aqib ZAHOOR Rub Nawaz SHAHID Naeem ul Haq TARIQ Zafar IQBAL Adnan Qayyum butt Saad ULLAH Hasan Bin awais Department of Metallurgy and Materials Engineering Pakistan Institute of Engineering and Applied Sciences(PIEAS)IslamabadPakistan Materials Division Pakistan Institute of Nuclear Science and Technology(PINSTECH)IslamabadPakistan

Aluminum matrix composites(AMCs), reinforced with novel pre-synthesized Al/Cu Fe multi-layered coreshell particles, were fabricated by different consolidation techniques to investigate their effect on microstructure and mechanical properties. To synthesize multi-layered Al/Cu Fe core-shell particles, Cu and Fe layers were deposited on Al powder particles by galvanic replacement and electroless plating method, respectively. The core-shell powder and sintered compacts were characterized by using X-ray diffraction(XRD), scanning electron microscopy(SEM) equipped with energy dispersive spectroscopy(EDX), pycnometer, microhardness and compression tests. The results revealed that a higher extent of interfacial reactions, due to the transformation of the deposited layer into intermetallic phases in spark plasma sintered composite, resulted in high relative density(99.26%), microhardness(165 HV0.3) and strength(572 MPa). Further, the presence of un-transformed Cu in the shell structure of hot-pressed composite resulted in the highest fracture strain(20.4%). The obtained results provide stronger implications for tailoring the microstructure of AMCs through selecting appropriate sintering paths to control mechanical properties.

关键词： core-shell reinforcement aluminum matrix composites electroless plating sintering techniques spark plasma sintering interfacial reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：