检索结果-南通市图书馆

Irradiation hardening behaviors of tungsten-potassium alloy studied by accelerated 3-MeV W^2+ ions

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2020年第4期29卷 336-343页

作者： Xiao-Liang yang Long-Qing Chen Wen-Bin Qiu yang-yi-peng song yi Tang Xu-Dong Cui Chang-song Liu Yan Jiang Tao Zhang Jun Tang Key Laboratory of Radiation Physics and Technology of Ministry of Education Institute of Nuclear Science and TechnologySichuan UniversityChengdu 610064China Sichuan Research Center of New Materials Institute of Chemical MaterialsChina Academy of Engineering PhysicsMianyang 621999China Key Laboratory of Materials Physics Institute of Solid State PhysicsChinese Academy of SciencesHefei 230031China

Tungsten-potassium(WK)alloy with ultrafine/fine grains and nano-K bubbles is fabricated through spark plasma sintering(SPS)and rolling *** this study,3-MeV W^2+ ion irradiation with a tandem accelerator is adopted to simulate the displacement damage caused by *** the depth of irradiation damage layer is limited to only 500 nm,the hardening behaviors of WK alloy and ITER(International Thermonuclear Experimental Reactor)-W under several damage levels are investigated through Bercovich tip nanoindentation test and other morphological *** indenter size effect(ISE),soft substrate effect(SSE),and damage gradient effect(DGE)are found to influence the measurement of *** or no pop-ins in irradiated samples are observed while visible pop-in events take place in unirradiated *** pile-up with different morphology features around the indentation exists in both WK and *** WK shows a smaller hardness increment than ITER-W under the same condition of displacement *** study provides beneficial information for WK alloy serving as a promising plasma facing materials(PFMs)candidate.

关键词： irradiation harden spark plasma sintering WK alloy nanoindentation

Electrochemical conversion of methane to bridge the gap in the artificial carbon cycle

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 286-308页

作者： Yuhao peng Yuefeng song Ihar Razanau Juanxiu Xiao Wei Xiao Di Hu Guoxiong Wang College of Chemistry and Molecular Sciences Hubei Key Laboratory of Electrochemical Power Sources Wuhan University State Key Laboratory of Catalysis Dalian National Laboratory for Clean Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Dalian Institute of Chemical Physics Chinese Academy of Sciences Laboratory of Physical-Chemical Technologies SSPA Scientific and Practical Materials Research Centre of NAS of Belarus State Key Laboratory of Marine Resources Utilization in South China Sea Collaborative Innovation Center of Marine Science and Technology School of Marine Science and Engineering Hainan University Department of Chemical and Environmental Engineering University of Nottingham Ningbo China

Methane, an abundant one-carbon（C1） resource, is extensively used in the industrial production of vital fuels and value-added chemicals. However, current industrial methane conversion technologies are energy-and carbon-intensive, mainly due to the high activation energy required to break the inert C–H bond, low selectivity, and problematic side reactions, including CO2emissions and coke deposition. Electrochemical conversion of methane（ECM） using intermittent renewable energy offers an attractive solution, due to its modular reactor design and operational flexibility across a broad spectrum of temperatures and pressures. This review emphasizes conversion pathways of methane in various reaction systems, highlighting the significance and advantages of ECM in facilitating a sustainable artificial carbon cycle. This work provides a comprehensive overview of conventional methane activation mechanisms and delineates the complete pathways of methane conversion in electrolysis contexts. Based on surface/interface chemistry, this work systematically analyzes proposed reaction pathways and corresponding strategies to enhance ECM efficiency towards various target products, including syngas, hydrocarbons, oxygenates, and advanced carbon materials. The discussion also encompasses opportunities and challenges for the ECM process, including insights into ECM pathways, rational electrocatalyst design, establishment of benchmarking protocols, electrolyte engineering, enhancement of CH4conversion rates, and minimization of CO2emission.

关键词： Methane Electrochemical conversion Reaction mechanism Catalyst design Electrode Electrocatalysis

Extramedullary plasmacytoma with the uvula as first affected site:A case report

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Oncology 2025年第1期16卷 53-58页

作者： Jing yang Hui peng Sheng-Ke Tu Min Li Kui song Department of Hematology The First Affiliated Hospital of Jishou UniversityJishou 416000Hunan ProvinceChina Department of Pharmacy The First Affiliated Hospital of Jishou UniversityJishou 416000Hunan ProvinceChina

BACKGROUND Extramedullary plasmacytoma(EMP)represents one of the rarer forms of plasma cell malignancies,capable of impacting a variety of tissues and organs throughout the *** majority of EMP cases are predominantly found in the head and neck region,especially within the laryngopharynx,as well as in the gastrointestinal *** there have been documented instances of oropharyngeal involvement in EMP cases in the academic literature,it is important to note that EMP specifically affecting the uvula is exceedingly ***,it is noteworthy that over 60% of epithelial carcinomas in the upper respiratory tract and oropharynx tend to metastasize to the cervical lymph nodes,indicating a propensity for regional spread in these types of *** this context,we present a rare case of extramedullary plasmacytoma where the uvula served as the initially affected *** case emphasizes the need for heightened awareness among clinicians regarding such unusual comorbidities,as early recognition and diagnosis can significantly influence patient management and treatment *** addition,a review of the relevant literature is included to further educate and inform healthcare professionals about this rare presentation,ultimately aiming to enhance clinical understanding and improve patient care in similar *** SUMMARY A 51-year-old man was admitted to our hospital because of a slowly enlarging neck mass.A physical examination revealed a palpable left lymph node,and magnetic resonance imaging(MRI)of the oropharynx and the neck showed a soft tissue mass in the oropharynx and enlargement of multiple lymph nodes in the *** soft tissue mass was diagnosed as plasmacytoma by immunohistochemical *** immunoglobulins and bone marrow biopsy showed normal ***,we diagnosed that as EMP of the *** four cycles of adjuvant chemotherapy dominated by bortezomib,MRI reexamination showed a significant reduction of the mass

关键词： Extramedullary plasmacytoma Plasmacytoma Uvula Multiple myeloma Case report

A cellulose-based lithium-ion battery separator with regulated ionic transport and high thermal stability for extreme environments

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2025年第1期18卷 315-322页

作者： Kun-peng yang song Xie Zi-Meng Han Hao-Cheng Liu Chong-Han yin Wen-Bin Sun Zhang-Chi Ling Huai-Bin yang De-Han Li Qing-Fang Guan Shu-Hong Yu Department of Chemistry New Cornerstone Science LaboratoryInstitute of Biomimetic Materials&ChemistryAnhui Engineering Laboratory of Biomimetic MaterialsDivision of Nanomaterials&ChemistryHefei National Research Center for Physical Sciences at the MicroscaleUniversity of Science and Technology of ChinaHefei 230026China Institute of Innovative Materials Department of Materials Science and EngineeringDepartment of ChemistrySouthern University of Science and TechnologyShenzhen 518055China

Separators play a critical role in lithium-ion ***,the restrictions of thermal stability and inferior electrical performance in commercial polyolefin separators significantly limit their applications under harsh ***,we report a cellulose-assisted self-assembly strategy to construct a cellulose-based separator massively and *** an ultrahigh ionic conductivity in electrolytes of 3.7 mS·cm^(-1) and the ability to regulate ion transport,the obtained separator is a promising alternative for high-performance lithium-ion *** addition,integrated with high thermal stability,the cellulose-based separator endows batteries with high safety at high temperatures,greatly expanding the application scenarios of energy storage devices in extreme environments.

关键词： lithium-ion batteries bio-inspired materials battery separators cellulose nanofiber ultrahigh ionic conductivity high safety

MoS_(2)Lubricate‑Toughened MXene/ANF Composites for Multifunctional Electromagnetic Interference Shielding

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 358-371页

作者： Jiaen Wang Wei Ming Longfu Chen Tianliang song Moxi Yele Hao Zhang Long yang Gegen Sarula Benliang Liang Luting Yan Guangsheng Wang School of Physical Science and Engineering Beijing Jiaotong UniversityBeijing 100044People’s Republic of China Key Laboratory of Bio‑Inspired Smart Interfacial Science and Technology of Ministry of Education School of ChemistryBeihang UniversityBeijing 100191People’s Republic of China

The design and fabrication of high toughness electromagnetic interference(EMI)shielding composite films with diminished reflection are an imperative task to solve electromagnetic pollution *** MXene/ANF(aramid nanofibers)–MoS_(2)composite films with nacre-like layered structure here are fabricated after the introduction of MoS_(2)into binary MXene/ANF composite *** introduction of MoS_(2)fulfills an impressive“kill three birds with one stone”improvement effect:lubrication toughening mechanical performance,reduction in secondary reflection pollution of electromagnetic wave,and improvement in the performance of photothermal *** the introduction of MoS_(2)into binary MXene/ANF(mass ratio of 50:50),the strain to failure and tensile strength increase from 22.1±1.7%and 105.7±6.4 MPa and to 25.8±0.7%and 167.3±9.1 MPa,*** toughness elevates from 13.0±4.1 to 26.3±0.8 MJ m^(−3)(~102.3%)*** the reflection shielding effectiveness(SE_(R))of MXene/ANF(mass ratio of 50:50)decreases~10.8%.EMI shielding effectiveness(EMI SE)elevates to 41.0 dB(8.2–12.4 GHz);After the introduction of MoS_(2)into binary MXene/ANF(mass ratio of 60:40),the strain to failure increases from 18.3±1.9%to 28.1±0.7%(~53.5%),the SE_(R)decreases~22.2%,and the corresponding EMI SE is 43.9 *** MoS_(2)also leads to a more efficient photothermal conversion performance(~45 to~55℃).Additionally,MXene/ANF–MoS_(2)composite films exhibit excellent electric heating performance,quick temperature elevation(15 s),excellent cycle stability(2,2.5,and 3 V),and long-term stability(2520 s).Combining with excellent mechanical performance with high MXene content,electric heating performance,and photothermal conversion performance,EMI shielding ternary MXene/ANF–MoS_(2)composite films could be applied in many industrial *** work broadens how to achieve a balance between mechanical properties and versatility of composites in the case of high-function fillers.

关键词： MXene-MoS_(2) Lubrication toughening EMI shielding Photothermal conversion Electric heating performance

Photothermal probiotics delivery of photodynamic agents for enhanced immunogenic cell death within hypoxia center of solid tumors

在线全文

学校读者我要写书评

暂无评论

Nano Research 2025年第1期18卷 642-652页

作者： Wen Luo Shiyu Du Yateng Jiang Bangshun He Jun Tang Jingjing yang Yujun song Jiangsu Key Laboratory of Artificial Functional Materials State Key Laboratory of Analytical Chemistry for Life ScienceNational Laboratory of Solid State MicrostructuresCollege of Engineering and Applied SciencesNanjing UniversityNanjing 210023China Department of Laboratory Medicine Nanjing First HospitalNanjing Medical UniversityNanjing 210006China Department of Anesthesiology Jinling HospitalMedical School of Nanjing UniversityNanjing 210000China Department of Biochemistry and Molecular Biology School of Medicine&Holistic Integrative MedicineJiangsu Collaborative Innovation Center of Chinese Medicinal Resources IndustrializationNanjing University of Chinese MedicineNanjing 210023China

Resulting from harsh hypoxic environmental conditions,central cells in the core of solid tumors are usually more aggressive and malignant with a less stable ***,therapeutic agents with improved penetration for the activation of immunity in tumor centers exhibit promising potential in ***,polydopamine-coated Escherichia coli Nissle 1917(EcN)bearing chlorin e6(Ce6)-loaded and polyethyleneimine(PEI)-coated hollow manganese dioxide(shorted as EP-ChP)are applied for enhanced immunotherapy in deep *** accumulation in tumor center through hypoxia targeting,manganese dioxide is degradated under the tumor microenvironment with released Ce6 and thus generates reactive oxygen species(ROS)upon 660 nm laser irradiation,which can further lower thermalresistance of cancer cells via HSP90α*** to that,heating induced by polydopamine upon 808 nm laser irradiation can achieve effective tumor *** upon dual laser induces enhanced immunogenic cell death,while bacterial infections in tumor tissues also trigger innate *** bacteria-based approach provides enhanced antitumor immune responses in deep tumors with great potential in the reshaping of immunosuppression tumor microenvironment.

关键词： bacteria phototherapies immunotherapy hypoxia targeting tumor penetration

Study on the hydrogen absorption properties of a YGdTbDyHo rare-earth high-entropy alloy

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 127-135页

作者： Tongyue Li Ziliang Xie Wenjiao Zhou Huan Tong Dawen yang Anjia Zhang Yuan Wu Xiping song State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China Whole Win(Beijing)Materials Sci.&Tech.Co. Ltd.Beijing 100083China

This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),*** indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with the alloy elements distributed *** hydrogen absorption,the phase structure of the HEA changed from a solid solution with an hexagonal-close-packed(HCP)structure to a high-entropy hydride with an faced-centered-cubic(FCC)structure without any secondary phase *** alloy demonstrated a maximum hydrogen storage capacity of 2.33 H/M(hydrogen atom/metal atom)at 723 K,with an enthalpy change(ΔH)of-141.09 kJ·mol^(-1)and an entropy change(ΔS)of-119.14 J·mol^(-1)·K^(-1).The kinetic mechanism of hydrogen absorption was hydride nucleation and growth,with an apparent activation energy(E_(a))of 20.90 kJ·mol^(-1).Without any activation,the YGdTbDyHo alloy could absorb hydrogen quickly(180 s at 923 K)with nearly no incubation period *** reason for the obtained value of 2.33 H/M was that the hydrogen atoms occupied both tetrahedral and octahedral *** results demonstrate the potential application of HEAs as a high-capacity hydrogen storage material with a large H/M ratio,which can be used in the deuterium storage field.

关键词： rare-earth high-entropy alloy hydrogen absorption capacity pressure–composition–temperature curves kinetics

Recent Advances in Fibrous Materials for Hydroelectricity Generation

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 109-133页

作者： Can Ge Duo Xu Xiao Feng Xing yang Zheheng song Yuhang song Jingyu Chen yingcun Liu Chong Gao Yong Du Zhe Sun Weilin Xu Jian Fang College of Textile and Clothing Engineering Soochow UniversitySuzhou 215123People’s Republic of China National Engineering Laboratory for Modern Silk Soochow UniversitySuzhou 215123People’s Republic of China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200People’s Republic of China Institute of Functional Nano&Soft Materials(FUNSOM) Soochow UniversitySuzhou 215123People’s Republic of China Department of Electrical and Computer Engineering University of MassachusettsAmherstMA 01003USA Department of Materials Imperial College LondonSouth Kensington CampusLondon SW72AZUK College of Textile Science and Engineering Zhejiang Sci-Tech UniversityHangzhou 310018People’s Republic of China School of Materials Science and Engineering Shanghai Institute of Technology100 Haiquan RoadShanghai 201418People’s Republic of China

Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable *** generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy *** materials with unique flexibility,processability,multifunctionality,and practicability have been widely applied for fibrous materials-based hydroelectricity generation(FHG).In this review,the power generation mechanisms,design principles,and electricity enhancement factors of FHG are first ***,the fabrication strategies and characteristics of varied constructions including 1D fiber,1D yarn,2D fabric,2D membrane,3D fibrous framework,and 3D fibrous gel are ***,the advanced functions of FHG during water harvesting,proton dissociation,ion separation,and charge accumulation processes are analyzed in ***,the potential applications including power supply,energy storage,electrical sensor,and information expression are also ***,some existing challenges are considered and prospects for future development are sincerely proposed.

关键词： Hydroelectricity Fibrous material Streaming potential Ion diffusion

Universal design of three-dimensional porous graphene-iron based promotors for kinetically rationalized lithium-sulfur chemistry

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 192-200页

作者： Hua Gao Yunfeng Zhang Menglei Wang Ruoxuan yang Shuai Feng Xuan Cao Yaping Zhang Zhongyuan Lu yingze song State Key Laboratory of Environment-Friendly Energy Materials School of Materials and Chemistry Southwest University of Science and Technology School of Material Science and Engineering Henan University of Technology College of Chemistry and Chemical Engineering Taishan University

Lithium-sulfur （Li-S） batteries are widely deemed to be one of the most potential candidates for future secondary batteries because of their remarkable energy ***,notorious polysulfide shuttling and retarded sulfur reaction kinetics pose significant obstacles to the further application of Li-S *** rationally designed highly active electrocatalysts can facilitate polysulfide conversion,the universal and scalable synthesis strategies need to be ***,a universal synthetic strategy to construct a series of three-dimensional （3D） porous graphene-iron （3DGr-Fe） based electrocatalysts involving 3DGr-FeP,3DGr-Fe3C,and 3DGr-Fe3Se4is exploited for manipulating the Li-S redox *** has been observed that the implementation of a 3D porous Gr architecture leads to the well-designed conductive networks,while the uniformly dispersed iron nanoparticles introduce an abundance of active sites,fostering the lithium polysulfide conversion,thereby bolstering the overall electrochemical *** Li-S battery with the 3DGr-Fe based electrocatalyst exhibits remarkable capacity retention of 94.8%upon 100 times at 0.2 ***,the soft-packaged Li-S pouch cell based on such a 3DGr-Fe electrocatalyst delivers superior capacity of 1060.71 mA h g-1and guarantees for the continuous 30 min work of fan *** investigation gives comprehensive insights into the design,synthesis,and mechanism of 3DGr-Fe based electrocatalysts with high activity toward efficient and durable Li-S batteries.

关键词： Lithium-sulfur battery Universal synthesis 3D graphene-iron based promotor Electrocatalysis