检索结果-南通市图书馆

Additives strategies to improving cycling stability of li metal batteries by modifying electrode electrolyte interphases

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第2期34卷 338-344页

作者： yuan li Pengfei Huang Chunyu Cui Xiaoyuan Ma li Chen Zekun li linhai li yuhong Tian School of Biological and Chemical Engineering Guangxi University of Science and Technology School of College of Chemistry and Chemical Engineering Hunan University Isky Future Energy Institute

li metal batteries（LMBs） have attracted much attention due to the ultra-high theoretical capacity of the li metal anode（LMA）.However,the uncontrollable dendrites growth and low coulombic efficiency hinder their practical ***,we explore 3,5-difluoropyridine（2F-BD） as a novel electrolyte additive to enable highperformance *** 2F-BD additive participates in and modifies the solvation structure of li ions by reducing the coordinated number of PF6-at the electrode surface,leading to the formation of a liF and li3N-rich solid electrolyte interphase（SEI）.The liF component increases the robustness of SEI and suppresses the formation of li dendrites,while the li3N component facilitates the transportation and reaction kinetics of li *** a result,the li‖li symmetric cell presents a stable cycling performance of up to 500 h at a current density of 1 mA *** coupling with liFePO4cathode,the obtained full cell achieves high specific capacities of 106.06 mA h g-1and 84.98 mA h g-1at 2.55 mA cm-2and 5.10 mA cm-2,respectively,and maintains a high capacity retention of84.0% after 1000 cycles at 0.13 mA cm-2,with an average cycling CE of 99.58%.

关键词： Electrolyte additive li dendrites li metal batteries liF and li3N-Rich electrode-electrolyte interphase liFePO4 cathode

Leaching kinetics of fluorine during the aluminum removal from spent li-ion battery cathode materials

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第4期138卷 312-325页

作者： Shengjie li Jianxin Zhu Research Center for Eco-Environmental Sciences Chinese Academy of SciencesBeijing 100085China University of Chinese Academy of Sciences Beijing 100049China

The high content of aluminum(Al)impurity in the recycled cathode powder seriously affects the extraction efficiency of Nickel,Cobalt,Manganese,and lithium resources and the actual commercial value of recycled materials,so Al removal is crucially important to conform to the industrial standard of spent li-ion battery cathode *** this work,we systematically investigated the leaching process and optimum conditions associated with Al removal from the cathode powder materials collected in a wet cathode-powder peeling and recycling production line of spent li-ion batteries(liBs).Moreover,we specifically studied the leaching of fluorine(F)synergistically happened along with the removal process of Al,which was not concerned about in other studies,but one of the key factors affecting pollution prevention in the recovery *** mechanism of the whole process including the leaching of Al and F from the cathode powder was indicated by using NMR,FTIR,and XPS,and a defluoridation process was preliminarily investigated in this *** leaching kinetics of Al could be successfully described by the shrinking core model,controlled by the diffusion process and the activation energy was 11.14 kJ/***,the leaching of F was attributed to the dissolution of liPF6and decomposition of PVDF,and the kinetics associated was described by Avrami *** interaction of Al and F is advantageous to realize the defluoridation to some *** is expected that our investigation will provide theoretical support for the large-scale recycling of spent liBs.

关键词： Al removal F leaching Cathode powder Heating alkali leaching Leaching kinetics

Physics-informed deep learning for fringe pattern analysis

在线全文

学校读者我要写书评

暂无评论

Opto-Electronic Advances 2024年第1期7卷 4-15页

作者： Wei yin yuxuan Che Xinsheng li Mingyu li yan Hu Shijie Feng Edmund y.Lam Qian Chen Chao Zuo Smart Computational Imaging Laboratory(SCILab) School of Electronic and Optical EngineeringNanjing University of Science and TechnologyNanjing 210094China Smart Computational Imaging Research Institute(SCIRI)of Nanjing University of Science and Technology Nanjing 210019China Jiangsu Key Laboratory of Spectral Imaging&Intelligent Sense Nanjing 210094China Department of Electrical and Electronic Engineering The University of Hong KongPokfulamHong Kong SAR 999077China

Recently,deep learning has yielded transformative success across optics and photonics,especially in optical *** neural networks (DNNs) with a fully convolutional architecture (e.g.,U-Net and its derivatives) have been widely implemented in an end-to-end manner to accomplish various optical metrology tasks,such as fringe denoising,phase unwrapping,and fringe ***,the task of training a DNN to accurately identify an image-to-image transform from massive input and output data pairs seems at best naive,as the physical laws governing the image formation or other domain expertise pertaining to the measurement have not yet been fully exploited in current deep learning *** this end,we introduce a physics-informed deep learning method for fringe pattern analysis (PI-FPA) to overcome this limit by integrating a lightweight DNN with a learning-enhanced Fourier transform profilometry (Le FTP) *** parameterizing conventional phase retrieval methods,the Le FTP module embeds the prior knowledge in the network structure and the loss function to directly provide reliable phase results for new types of samples,while circumventing the requirement of collecting a large amount of high-quality data in supervised learning *** by the initial phase from Le FTP,the phase recovery ability of the lightweight DNN is enhanced to further improve the phase accuracy at a low computational cost compared with existing end-to-end *** results demonstrate that PI-FPA enables more accurate and computationally efficient single-shot phase retrieval,exhibiting its excellent generalization to various unseen objects during *** proposed PI-FPA presents that challenging issues in optical metrology can be potentially overcome through the synergy of physics-priors-based traditional tools and data-driven learning approaches,opening new avenues to achieve fast and accurate single-shot 3D imaging.

关键词： optical metrology deep learning physics-informed neural networks fringe analysis phase retrieval

Conventional and micro scale finite element modeling for metal cutting process:A review

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 199-232页

作者： Le WANG Caixu yUE Xianli liU Ming li yongshi XU Steven y.liANG Key Laboratory of Advanced Manufacturing and Intelligent Technology Ministry of EducationHarbin University of Science and TechnologyHarbin 150080China George W.Woodruff School of Mechanical Engineering Georgia Institute of TechnologyAtlanta 30332USA

The metal cutting process is accompanied by complex stress field,strain field,temperature *** comprehensive effects of process parameters on chip morphology,cutting force,tool wear and residual stress are complex and *** element method(FEM)is considered as an effective method to predict process variables and reveal microscopic physical phenomena in the cutting ***,the finite element(FE)simulation is used to research the conventional and micro scale cutting process,and the differences in the establishment of process variable FE simulation models are distinguished,thereby improving the accuracy of FE *** reliability and effectiveness of FE simulation model largely depend on the accuracy of the simulation method,constitutive model,friction model,damage model in describing mesh element,the dynamic mechanical behavior of materials,the tool-chip-workpiece contact process and the chip formation *** this paper,the FE models of conventional and micro process variables are comprehensively and up-to-date reviewed for different materials and machining *** purpose is to establish a FE model that is more in line with the real cutting conditions,and to provide the possibility for optimizing the cutting process *** development direction of FE simulation of metal cutting process is discussed,which provides guidance for future cutting process modeling.

关键词： Conventional and micro scale Finite element simulation Metal cutting process Micro cutting Modeling

Effect of Eu3+,Bi3+,and li+ doping on luminescent property of GdNbO4

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 66-75页

作者： S.W.Wi y.S.Lee Department of Physics and Integrative Institute of Basic Sciences Soongsil University

We investigated the emission properties of Eu3+-doped GdNbO4-based oxide phosphors,aiming at improving the Eu3+emission by codoping of Bi3+and li+.Eu3+singly doped,Eu3+and Bi3+doubly doped,and Eu3+,Bi3+,and li+triply doped GdNbO4were prepared using a high-temperature solid-state reaction *** red-orange emissions from Eu3+in the singly doped samples are significantly improved by the codoping of Bi3+,mainly due to the energy transfer from Bi3+to Eu3+.The additional codoping of li+is found to increase the Eu3+emission *** improvement might be attributed to the increase in the photoluminescent quantum yield originating from larger grain sizes and better crystallinity.A detailed analysis of the X-ray diffraction pattern and the asymmetric ratio estimated from the photoluminescence spectra show that the local lattice environment around Eu3+in GdNbO4does not change significantly with the codoping of Bi3+and li+.Our results indicate that li+doping is a promising way to improve the emission properties of rare-earth ion-doped GdNbO4phosphors.

关键词： Eu 3+ GdNbO 4 Codoping of li + Photoluminescence Sensitizer Rare earths

SEI/dead li-turning capacity loss for high-performance anode-free solid-state lithium batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 145-152页

作者： Qianwen yin Tianyu li Hongzhang Zhang Guiming Zhong Xiaofei yang Xianfeng li Division of Energy Storage Dalian National Laboratory for Clean EnergyDalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina University of Chinese Academy of Sciences Beijing 100049China Key Laboratory of Long-Duration and Large-Scale Energy Storage Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina Laboratory of Advanced Spectro-Electrochemistry and lithium-Ion Batteries Dalian National Laboratory for Clean EnergyDalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina

Anode-free solid-state lithium metal batteries(AF-SSLBs)have the potential to deliver higher energy density and improved safety beyond lithium-metal ***,the unclear mechanism for the fast capacity decay in AF-SSLBs,either determined by dead li or solid electrolyte interface(SEI),limits the proposal of effective strategies to prolong cycling *** clarify the underlying mechanism,herein,the evolution of SEI and dead li is quantitatively analyzed by a solid-state nuclear magnetic resonance(ss-NMR)technology in a typical liPF6-based polymer *** results show that the initial capacity loss is attributed to the formation of SEI,while the dead li dominates the following capacity loss and the growth rate is 0.141 mA h cm^(−2)cycle−*** reduce the active li loss,the combination of inorganic-rich SEI and self-healing electrostatic shield effect is proposed to improve the reversibility of li deposition/dissolution behavior,which reduces the capacity loss rate for the initial SEI and following dead li generation by 2.3 and 20.1 folds,*** a result,the initial Coulombic efficiency(ICE)and stable CE increase by 15.1%and 15.3%in li-Cu cells,which guides the rational design of high-performance AF-SSLBs.

关键词： Solid-state lithium batteries Solid-state NMR Anode-free SEI Dead li

Towards an ultrafast 3D imaging scanning liDAR system:a review

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2024年第8期12卷 1709-1729页

作者： ZHI li yAQI HAN liCAN WU ZIHAN ZANG MAOliN DAI SZE yUN SET SHINJI yAMASHITA QIAN li H.y.FU Tsinghua Shenzhen International Graduate School Tsinghua UniversityShenzhen 518055China Department of Electrical Engineering and Information Systems The University of TokyoTokyo 113-8656Japan Research Center for Advanced Science and Technology The University of TokyoTokyo 153-8904Japan School of Electronic and Computer Engineering Peking UniversityShenzhen 518055China

light detection and ranging(liDAR),as a hot imaging technology in both industry and academia,has undergone rapid innovation and *** current mainstream direction is towards system miniaturization and *** are many metrics that can be used to evaluate the performance of a liDAR system,such as lateral resolution,ranging accuracy,stability,size,and *** recently,with the continuous enrichment of liDAR application scenarios,the pursuit of imaging speed has attracted tremendous research ***,for autonomous vehicles running on motorways or industrial automation applications,the imaging speed of liDAR systems is a critical *** this review,we will focus on discussing the upper speed limit of the liDAR *** on the working mechanism,the limitation of optical parts on the maximum imaging speed is *** beam scanner has the greatest impact on imaging *** provide the working principle of current popular beam scanners used in liDAR systems and summarize the main constraints on the scanning ***,we highlight the spectral scanning liDAR as a new paradigm of ultrafast ***,to further improve the imaging speed,we then review the parallel detection methods,which include multiple-detector schemes and multiplexing ***,we summarize the liDAR systems with the fastest point acquisition rate reported *** the outlook,we address the current technical challenges for ultrafast liDAR systems from different aspects and give a brief analysis of the feasibility of different approaches.

关键词： liDAR scanner system

Theoretical Design of Defects as a Driving Force for Ion Transport in li_(3)OBr Solid Electrolyte

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 143-153页

作者： Xingyun Luo yanlu li Xian Zhao State Key Lab of Crystal Materials and Institute of Crystal Materials Shandong UniversityJinan 250100China Center for Optics Research and Engineering Shandong UniversityQingdao 266237China

Due to ever-increasing concerns about safety issues in using li ionic batteries,solid electrolytes have extensively *** li-rich antiperovskite li_(3)OBr has been considered as a promising solid electrolyte candidate,but it still suffers challenges to achieve a high ionic conductivity owing to the high intrinsic symmetry of the crystal ***,we presented a design strategy that introduces various point defects and grain boundaries to break the high lattice symmetry of li_(3)OBr crystal,and their effect and microscopic mechanism of promoting the migration of li-ion were explored *** has been found that li_(i)are the dominant defects responsible for the fast li-ion diffusion in bulk li_(3)OBr and its surface,but they are easily trapped by the grain boundaries,leading to the annihilating of the Frenkel defect pair V'_(li)+li_(i),and thus limits the V'_(li)diffusion at the grain *** V_(Br)defect near the grain boundaries can effectively drive V'_(li)across the grain boundary,thereby converting the carrier of li^(+)migration from li,in the bulk and surface to V'_(li)at the grain boundary,and thus improving the ionic conductivity in the whole li_(3)OBr *** work provides a comprehensive insight into the li^(+)transport and conduction mechanism in the li_(3)OBr *** opens a new way of improving the conductivity for all-solid-state li electrolyte material through the defect design.

关键词： defects density functional theory ionic migration solid electrolyte

Highly polar CoP/Co_(2)P heterojunction composite as efficient cathode electrocatalyst for li-air battery

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第9期35卷 486-490页

作者： Miaomiao li Mengwei yuan Xingzi Zheng Kunyu Han Genban Sun Fujun li Huifeng li Beijing Key Laboratory of Energy Conversion and Storage Materials College of ChemistryBeijing Normal UniversityBeijing 100875China Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education) College of ChemistryNankai UniversityTianjin 300071China Center for Advanced Materials Research Beijing Normal UniversityZhuhai 519087China

In order to advance the commercialization of rechargeable li-air batteries,it is of importance to explore cathode catalyst with efficient catalytic *** metal oxides have poor electrical conductivity,while cobalt phosphide has excellent electrical conductivity and large specific surface ***,its application in organic li-air batteries has been much less studied,and the electrocatalytic activity desires to be further ***,CoP/Co_(2)P heterojunction composite with higher polarity was *** discharge product of high-polarity CoP/Co_(2)P had a new porous box-like morphology,which was easy to be decomposed and exposed more active *** highly polar CoP/Co_(2)P heterostructure composite had homogeneous pores,the synergistic effect existed between CoP and Co_(2)P,and the discharge product was porous box mixed with li_(2)O_(2)and liOH,which made CoP/Co_(2)P achieve high specific capacity of14632 m Ah/g and cycle stably 161 times when used as air electrode cathode *** work furnished a thought for the construction of cathode catalysts with efficient catalytic activity for li-air batteries.

关键词： li-air battery Cathode catalyst CoP/Co_(2)P Heterojunction structure High polarity