检索结果-南通市图书馆

Journal of Materials Science & Technology 2024年第2期169卷 235-242页

作者： h.X.Lu h.Liu z.z.Fu y.y.Chen h.Q.Dai z.hu W.L.zhang R.Q.Guo Institute for Electric Light Sources School of Information Science and TechnologyFudan UniversityShanghai 200433China Institute of Future Lighting Academy for Engineering and TechnologyFudan UniversityShanghai 200433China yiwu Research Institute of Fudan University YiwuZhejiang 322000China zhongshan-Fudan Joint Innovation Center Zhongshan 528437China

In this study,a two-step method was used to synthesize highly luminescent AgGaS/znS/znS quantum dots(QDs).In the first step,an inner znS shell was formed via a one-pot method,which resulted in a smaller lattice mismatch between the AgGaS core and the outer znS shell,thereby facilitating the formation of a thick outer *** the two-step shelling process,the synthesized AgGaS/znS/znS QDs showed an excellent photoluminescence quantum yield(PLQy)of 96.4%with a peak wavelength of 508 nm,repre-senting the highest PLQy reported thus far for AgGaS ***,the effect of halogen ions in zn precursors on the shelling process was *** was proposed that the capacity of halogen ions to coordinate with the QDs influenced the balance between zn cation diffusion and znS shelling ***,the znS shelling reaction was dominant when znCl_(2)was employed,while zn cation diffusion was the dominant process under the I^(−)-rich *** work provides insights into the interfacial restructuring during the znS shelling and offers a clear map for the tailored synthesis of core/shell QDs.

关键词： AgGaS Quantum dots Photoluminescence Core/shell Alloyed core/shell interface

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.y.huang z.yang S.y.yang z.h.Dai y.J.Liu J.h.Liao G.y.zhong z.J.Xie y.P.Fang S.S.zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure heterostructure Photothermal effect Photocatalyst hydrogen evolution

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： y.h.z.ang h.Li z.W.yang X.Liu Q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of high-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

Distinct Electrical and Mechanical Responses of a Cu-10Fe Composite Prepared by hot-Pressed Sintering and Post Treatment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： X.y.yue S.y.Peng X.zhang C.N.he y.z.Tian Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of Materials Science and Engineering and Tianjin Key Laboratory of Composite and Functional Materials Tianjin UniversityTianjin300350China Research Centre for Metallic Wires Northeastern UniversityShenyang110819China

A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe *** Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.

关键词： Cu-Fe composite hot-pressed sintering Thermal stability Strength Electrical conductivity

Precipitation of multi-type nano-quasicrystals in a Mg-zn-y alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.z.Wang X.z.zhou L.F.zhang h.Q.ye z.Q.yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji hua Laboratory Foshan 528251China Foshan University Foshan 528231China

Mg-6zn-1y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： Quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

Fast efficient photon deceleration in plasmas by using two laser pulses at different frequencies

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第3期9卷 11-18页

作者： y.X.Wang X.L.zhu S.M.Weng P.Li X.F.Li h.Ai h.R.Pan z.M.Sheng Key Laboratory for Laser Plasmas(moe) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghai 200240China Research Center of Laser Fusion of China Academy of Engineering Physics MianyangSichuan 621900China State key Laboratory of high Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Tsung-dao Lee Institute Shanghai Jiao Tong UniversityShanghai 200240China

The generation of ultrashort high-power light sources in the mid-infrared(mid-IR)to terahertz(Thz)range is of interest for applications in a number of fields,from fundamental research to biology and *** conventional laser technology,photon deceleration in plasma wakes provides an alternative approach to the generation of ultrashort mid-IR or Thz ***,we present a photon deceleration scheme for the efficient generation of ultrashort mid-IR or Thz pulses by using an intense driver laser pulse with a relatively short wavelength and a signal laser pulse with a relatively long *** signal pulse trails the driver pulse with an appropriate time delay such that it sits at the front of the second wake bubble that is driven by the driver *** to its relatively long wavelength,the signal pulse will be subjected to a large gradient of the refractive index in the plasma wake ***,the photon deceleration in the plasma wake becomes faster and more efficient for signal pulses with longer *** greatly enhances the capacity and efficiency of photon deceleration in the generation of ultrashort high-power light sources in the long-wavelength IR and Thz spectral ranges.

关键词： laser ultrashort photon

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 332-344页

作者： z.y.Xue X.J.Li J.h.Chu M.M.Li D.N.zou L.B.Tong School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

关键词： Mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

STCF conceptual design report (Volume 1): Physics & detector

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第1期19卷 1-154页

作者： M.Achasov X.C.Ai L.P.An R.Aliberti Q.An X.z.Bai y.Bai O.Bakina A.Barnyakov V.Blinov V.Bobrovnikov D.Bodrov A.Bogomyagkov A.Bondar I.Boyko z.h.Bu F.M.Cai h.Cai J.J.Cao Q.h.Cao X.Cao z.Cao Q.Chang K.T.Chao D.y.Chen h.Chen h.X.Chen J.F.Chen K.Chen L.L.Chen P.Chen S.L.Chen S.M.Chen S.Chen S.P.Chen W.Chen X.Chen X.F.Chen X.R.Chen y.Chen y.Q.Chen h.y.Cheng J.Cheng S.Cheng T.G.Cheng J.P.Dai L.y.Dai X.C.Dai D.Dedovich A.Denig I.Denisenko J.M.Dias D.z.Ding L.y.Dong W.h.Dong V.Druzhinin D.S.Du y.J.Du z.G.Du L.M.Duan D.Epifanov y.L.Fan S.S.Fang z.J.Fang G.Fedotovich C.Q.Feng X.Feng y.T.Feng J.L.Fu J.Gao y.N.Gao P.S.Ge C.Q.Geng L.S.Geng A.Gilman L.Gong T.Gong B.Gou W.Gradl J.L.Gu A.Guevara L.C.Gui A.Q.Guo F.K.Guo J.C.Guo J.Guo y.P.Guo z.h.Guo A.Guskov K.L.han L.han M.han X.Q.hao J.B.he S.Q.he X.G.he y.L.he z.B.he z.X.heng B.L.hou T.J.hou y.R.hou C.y.hu h.M.hu K.hu R.J.hu W.h.hu X.h.hu y.C.hu J.hua G.S.huang J.S.huang M.huang Q.y.huang W.Q.huang X.T.huang X.J.huang y.B.huang y.S.huang N.hüsken V.Ivanov Q.P.Ji J.J.Jia S.Jia z.K.Jia h.B.Jiang J.Jiang S.z.Jiang J.B.Jiao z.Jiao h.J.Jing X.L.Kang X.S.Kang B.C.Ke M.Kenzie A.Khoukaz I.Koop E.Kravchenko A.Kuzmin y.Lei E.Levichev C.h.Li C.Li D.y.Li F.Li G.Li G.Li h.B.Li h.Li h.N.Li h.J.Li h.L.Li J.M.Li J.Li L.Li L.Li L.y.Li N.Li P.R.Li R.h.Li S.Li T.Li W.J.Li X.Li X.h.Li X.Q.Li X.h.Li y.Li y.y.Li z.J.Li h.Liang J.h.Liang y.T.Liang G.R.Liao L.z.Liao y.Liao C.X.Lin D.X.Lin X.S.Lin B.J.Liu C.W.Liu D.Liu F.Liu G.M.Liu h.B.Liu J.Liu J.J.Liu J.B.Liu K.Liu K.y.Liu K.Liu L.Liu Q.Liu S.B.Liu T.Liu X.Liu y.W.Liu y.Liu y.L.Liu z.Q.Liu z.y.Liu z.W.Liu I.Logashenko y.Long C.G.Lu J.X.Lu N.Lu Q.F.Lü y.Lu y.Lu z.Lu P.Lukin F.J.Luo T.Luo X.F.Luo y.h.Luo h.J.Lyu X.R.Lyu J.P.Ma P.Ma y.Ma y.M.Ma F.Maas S.Malde D.Matvienko z.X.Meng R.Mitchell A.Nefediev y.Nefedov S.L.Olsen Q.Ouyang P.Pakhlov G.Pakhlova X.Pan y.Pan E.Passemar y.P.Pei h.P.Peng L.Peng X.y.Peng X.J.Peng K.Peters S.Pivovarov E.Pyata B.B.Qi y.Q.Qi W.B.Qian y.Qian C.F.Qiao J.J.Qin J.J.Qin L.Q.Qin X.S.Qin T.L.Qiu J.Rademacker C.F.Redmer h.y.Sang Anhui University Hefei 230039China Beihang University Beijing 100191China Budker Institute of Nuclear Physics Novosibirsk 630090Russia CAS Key Laboratory of Theoretical Physics Institute of Theoretical PhysicsChinese Academy of SciencesBeijing 100190China Cavendish Laboratory University of CambridgeJJ Thomson AveCambridge CB30HEUnited Kingdom Central China Normal University Wuhan 430079China Central South University Changsha 410083China China University of Geosciences Wuhan 430074China China University of Mining and Technology Xuzhou 221116China École Polytechnique Fédérale de Lausanne(EPFL) LausanneSwitzerland Fudan University Shanghai 200433China Goethe University Frankfurt D-60325 Frankfurt am MainGermany Guangxi Normal University Guilin 541004China Guangxi Uninversity Nanning 530004China hangzhou Institute for Advanced Study UCASHangzhou 310024China hebei Normal University Shijiazhuang 050024China hebei University Baoding 071002China hefei University of Technology Hefei 230601China helmholtz Institute Mainz Staudinger Weg 18D-55099 MainzGermany henan Normal University Xinxiang 453007China henan University Kaifeng 475004China high Energy Physics Center Chung-Ang UniversitySeoul 06974Korea higher School of Economy 11 Pokrovsky Bulvar Moscow 109028Russia huangshan University Huangshan 245000China hubei University of Automotive Technology Shiyan 442002China hunan Normal University Changsha 410081China hunan University of Science and Technology Xiangtan 411201China hunan University Changsha 410082China Indiana University BloomingtonIndiana 47405USA Inner Mongolia University Hohhot 010021China Institute of Advanced Science Facilities Shenzhen 518107China Institute of high Energy Physics Chinese Academy of SciencesBeijing 100049China Institute of Modern Physics Chinese Academy of SciencesLanzhou 730000China Institute of Physics Academia SinicaTaipeiTaiwan 11529China Institute of Theoretical Physics Chinese Academy of SciencesBeijing 100190China Jilin University Changch

The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics *** is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or *** STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard *** STCF project in China is under development with an extensive R&D *** document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.

关键词： electron–positron collider tau-charm region high luminosity STCF detector conceptual design

Exploring Variability in Sea Level at a Tide Gauge Station through Control Charts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental & Earth Sciences 2024年第1期6卷 11-18页

作者： h.Bâkiİz Independent Scholar Boca Raton Florida33496USA

Monitoring temporal changes in sea level is important in assessing coastal *** level anomalies at a tide gauge station,if kinematically conceived,include systematic variations such as trend,acceleration,periodic oscillations,and random *** them,the non-stationary nature of the random sea level variations of known or unknown origin at coastal regions has been long recognized by the sea level *** study proposes the analyses of subgroups of random residual statistics of a rigorously formulated kinematic model solution of tide gauge variations using X-bar and S control *** approach is demonstrated using Key West,Florida tide gauge *** mean and standard errors of 5-year-long subgroups of the residuals revealed that sea level changes at this location have been progressively intensifying from 1913 to the *** oscillations in sea level at this locality may be attributed partly to the thermal expansion of seawater with increasing temperatures causing larger buoyancy-related sea level fluctuations as well as the intensification of atmospheric events including wind patterns and the impact of changes in inverted barometer effects that will alter coastal risk assessments for the future.

关键词： Climate change Sea level variance X-bar S control charts

Decellularised extracellular matrix-based injectable hydrogels for tissue engineering applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Biomaterials Translational 2024年第2期5卷 114-128页

作者： Guo W.-y. Wang W.-h. Xu P.-y. Kankala R.K. Chen A.-z. Institute of Biomaterials and Tissue Engineering Huaqiao University Fujian Province Xiamen China Fujian Provincial Key Laboratory of Biochemical Technology (huaqiao University) Fujian Province Xiamen China

Decellularised extracellular matrix (dECM) is a biomaterial derived from natural tissues that has attracted considerable attention from tissue engineering researchers due to its exceptional biocompatibility and malleability attributes. These advantageous properties often facilitate natural cell infiltration and tissue reconstruction for regenerative medicine. Due to their excellent fluidity, the injectable hydrogels can be administered in a liquid state and subsequently formed into a gel state in vivo, stabilising the target area and serving in a variety of ways, such as support, repair, and drug release functions. Thus, dECM-based injectable hydrogels have broad prospects for application in complex organ structures and various tissue injury models. This review focuses on exploring research advances in dECM-based injectable hydrogels, primarily focusing on the applications and prospects of dECM hydrogels in tissue engineering. Initially, the recent developments of the dECM-based injectable hydrogels are explained, summarising the different preparation methods with the evaluation of injectable hydrogel properties. Furthermore, some specific examples of the applicability of dECM-based injectable hydrogels are presented. Finally, we summarise the article with interesting prospects and challenges of dECM-based injectable hydrogels, providing insights into the development of these composites in tissue engineering and regenerative medicine. © 2024, Chinese Medical Multimedia Press Co Ltd. All rights reserved.

关键词： decellularisation methods decellularised extracellular matrix injectable hydrogels tissue engineering