检索结果-南通市图书馆

Petroleum Science 2023年第4期20卷 2372-2385页

作者： Li-Jun Sun xue-yu pang Siavash Ghabezloo Hai-Bing Yan School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongPR China Key Laboratory of Unconventional Oil&Gas Development(China University of Petroleum(East China)) Ministry of EducationQingdao266580ShandongPR China Navier Ecole des PontsUniv Gustave EiffelCNRSMarne-la-ValleeFrance CNPC Chuanqing Drilling Engineering Co.Ltd.(CCDC) Chengdu610051SichuanPR China

A comprehensive experimental program has been performed to characterize the hydration and engineering property evolution of a class G oil well cement under various curing temperatures from 30 to 90℃.The progress of hydration was monitored by isothermal calorimetry(atmospheric pressure);the viscosity evolution was measured using a high temperature and high pressure consistometer(up to 200 MPa);the ultrasonic property development was evaluated by an ultrasonic cement analyzer(up to 100 MPa).Test results indicate that the influences of curing temperature and pressure on the hydration,viscosity and ultrasonic property development can be modeled by a scale factor method that is similar to the maturity method used in the concrete ***,the key parameters of the scale factor model,namely the apparent activation energy and the apparent activation volume of cement showed obvious variations with test method and curing *** test results indicate that the curing temperature has a stronger effect on cement hydration rate than viscosity and ultrasonic property development rate,while the curing pressure has a much stronger influence on cement slurry properties before setting(viscosity)than after setting(ultrasonic property).

关键词： Activation energy Activation volume Isothermal calorimetry Consistency Ultrasonic property

Combined use of fly ash and silica to prevent the long-term strength retrogression of oil well cement set and cured at HPHT conditions

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1122-1134页

作者： Guo-Dong Cheng xue-yu pang Jin-Sheng Sun Zheng-Song Qiu Chuang-Chuang Wang Jian-Kun Qin Ning Li School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongChina National Key Laboratory of Deep Oil and Gas China University of Petroleum(East China)Qingdao266580ShandongChina Oil and Gas Engineering Research Institute(Tarim Oilfield Company) China National Petroleum CorporationTarim841000XinjiangChina

The long-term strength retrogression of silica-enriched oil well cement poses a significant threat to wellbore integrity in deep and ultra-deep wells, which is a major obstacle for deep petroleum and geothermal energy development. Previous attempts to address this problem has been unsatisfactory because they can only reduce the strength decline rate. This study presents a new solution to this problem by incorporating fly ash to the traditional silica-cement systems. The influences of fly ash and silica on the strength retrogression behavior of oil well cement systems directly set and cured under the condition of 200°C and 50 MPa are investigated. Test results indicate that the slurries containing only silica or fly ash experience severe strength retrogression from 2 to 30 d curing, while the slurries containing both fly ash and silica experience strength enhancement from 2 to 90 d. The strength test results are corroborated by further evidences from permeability tests as well as microstructure analysis of set cement. Composition of set cement evaluated by quantitative X-ray diffraction analyses with partial or no known crystal structure(PONKCS) method and thermogravimetry analyses revealed that the conversion of amorphous C-(A)-S-H to crystalline phases is the primary cause of long-term strength *** addition of fly ash can reduce the initial amount of C-(A)-S-H in the set cement, and its combined use with silica can prevent the crystallization of C-(A)-S-H, which is believed to be the working mechanism of this new admixture in improving long-term strength stability of oil well cement systems.

关键词： Fly ash Long-term strength retrogression High temperature Quantitative X-ray diffraction(QXRD) Partial or no known crystal structure(PONKCS)

Observation of acoustic hybrid topological phases induced by the p-d orbital interactions

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 132-139页

作者： Xiao Xiang Feng Gao yu-Gui Peng Peng Wu Zong-Lin Li xue-Feng Zhu School of Physics and Innovation Institute Huazhong University of Science and Technology

In spinless systems,growing attention has recently been attracted to synthetic gauge fields,which redefine the fundamental crystal symmetries by utilizing the projective algebraic ***,synthetic gauge fields have been commonly investigated in single orbital systems,and explorations on hybrid orbitals remain elusive in ***,we report the experimental observation of hybrid topological phases induced by hybrid synthetic gauge flux,which is formed by the interaction between p and d orbitals embedded in acoustic *** breaking the translation symmetries of Lxand/or Ly,we unambiguously demonstrate the first-order M?bius edge states and higher-order corner *** work establishes a platform for seeking exotic topological phases induced by hybrid-orbitals interactions and initializing the framework of hybrid-orbitalsrelated topological *** applications can be anticipated in scenarios such as high-quality sensing and robust wave trapping due to the stepwise energy distribution of the hybrid topological phase.

关键词： topological insulator synthetic gauge field projective symmetry corner states

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling xue Wenning Liu Shoumei Xiong Center of Materials Science and Engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation Engineering Central South UniversityChangsha 410075China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China School of Materials Science and Engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

Interannual variability of boreal summer intraseasonal oscillation over the northwestern Pacific influenced by the Pacific Meridional Mode

在线全文

学校读者我要写书评

暂无评论

Atmospheric and Oceanic Science Letters 2025年第1期18卷 6-11页

作者： Haoyu Zhou pang-Chi Hsu Lin Chen Yitian Qian Key Laboratory of Meteorological Disaster Ministry of Education/Joint International Research Laboratory of Climate and Environmental Change/Collaborative Innovation Center on Forecast and Evaluation of Meteorological DisastersNanjing University of Information Science and TechnologyNanjingChina

During the boreal summer,intraseasonal oscillations exhibit significant interannual variations in intensity over two key regions:the central-western equatorial Pacific(5°S-5°N,150°E-150°W)and the subtropical Northwestern Pacific(10°-20°N,130°E-175°W).The former is well-documented and considered to be influenced by the ENSO,while the latter has received comparatively less attention and is likely influenced by the Pacific Meridional Mode(PMM),as suggested by partial correlation analysis *** elucidate the physical processes responsible for the enhanced(weakened)intraseasonal convection over the subtropical northwestern Pacific during warm(cold)PMM years,the authors employed a moisture budget *** findings reveal that during warm PMM years,there is an increase in summer-mean moisture over the subtropical northwestern *** increase interacts with intensified vertical motion perturbations in the region,leading to greater vertical moisture advection in the lower troposphere and consequently resulting in convective *** a process is pivotal in amplifying intraseasonal convection *** observational findings were further verified by model experiments forced by PMM-like sea surface temperature patterns.

关键词： Boreal summer intraseasonal oscillation Interannual variability Pacific Meridional Mode Moisture budget analysis

Advances in the Development of Gradient Scaffolds Made of Nano-Micromaterials for Musculoskeletal Tissue Regeneration

在线全文

学校读者我要写书评

暂无评论

NANO-MICRO LETTERS 2025年第1期17卷 1-46页

作者： Fang, Lei Lin, Xiaoqi Xu, Ruian Liu, Lu Zhang, yu Tian, Feng Li, Jiao Jiao xue, Jiajia Beijing Univ Chem Technol Beijing Lab Biomed Mat Beijing 100029 Peoples R China Beijing Univ Chem Technol State Key Lab Organ Inorgan Composites Beijing 100029 Peoples R China Univ Technol Sydney Fac Engn & IT Sch Biomed Engn Sydney NSW 2007 Australia

This review highlights the gradient variations in the structural composition of musculoskeletal tissues and comprehensively examines recent progress in the fabrication and application of biomimetic gradient scaffolds for musculoskeletal *** challenges and prospects of gradient scaffolds for clinical application are discussed. The intricate hierarchical structure of musculoskeletal tissues, including bone and interface tissues, necessitates the use of complex scaffold designs and material structures to serve as tissue-engineered substitutes. This has led to growing interest in the development of gradient bone scaffolds with hierarchical structures mimicking the extracellular matrix of native tissues to achieve improved therapeutic outcomes. Building on the anatomical characteristics of bone and interfacial tissues, this review provides a summary of current strategies used to design and fabricate biomimetic gradient scaffolds for repairing musculoskeletal tissues, specifically focusing on methods used to construct compositional and structural gradients within the scaffolds. The latest applications of gradient scaffolds for the regeneration of bone, osteochondral, and tendon-to-bone interfaces are presented. Furthermore, the current progress of testing gradient scaffolds in physiologically relevant animal models of skeletal repair is discussed, as well as the challenges and prospects of moving these scaffolds into clinical application for treating musculoskeletal injuries.

关键词： Gradient scaffolds Musculoskeletal tissues Advanced manufacturing Biomaterials Tissue regeneration

Comparative analysis of empirical and deep learning models for ionospheric sporadic E layer prediction

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2025年第1期9卷 10-19页

作者： BingKun yu PengHao Tian XiangHui xue Christopher JScott HaiLun Ye JianFei Wu Wen Yi TingDi Chen XianKang Dou Institute of Deep Space Sciences Deep Space Exploration LaboratoryHefei 230088China CAS Key Laboratory of Geospace Environment School of Earth and Space SciencesUniversity of Science and Technology of ChinaHefei 230026China Hefei National Laboratory University of Science and Technology of ChinaHefei 230088China Department of Meteorology University of ReadingReading RG66BBUK

Sporadic E(Es)layers in the ionosphere are characterized by intense plasma irregularities in the E region at altitudes of 90-130 *** they can significantly influence radio communications and navigation systems,accurate forecasting of Es layers is crucial for ensuring the precision and dependability of navigation satellite *** this study,we present Es predictions made by an empirical model and by a deep learning model,and analyze their differences comprehensively by comparing the model predictions to satellite RO measurements and ground-based ionosonde *** deep learning model exhibited significantly better performance,as indicated by its high coefficient of correlation(r=0.87)with RO observations and predictions,than did the empirical model(r=0.53).This study highlights the importance of integrating artificial intelligence technology into ionosphere modelling generally,and into predicting Es layer occurrences and characteristics,in particular.

关键词： ionospheric sporadic E layer radio occultation ionosondes numerical model deep learning model artificial intelligence

Preparation of Co/S co-doped carbon catalysts for excellent methylene blue degradation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 169-181页

作者： Haixu Li Haobo He Tiannan Jiang yunfei Du Zhichen Wu Liang Xu Xinjie Wang Xiaoguang Liu Wanhua yu Wendong xue School of Materials Science and Engineering University of Science and Technology BeijingBeijing 100083China Beijing Jinyu Tongda Refractory Technologies Co. Ltd.Beijing 100085China

S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)*** effects of two different mixing routes were identified on the MB degradation ***,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with ***,the degradation parameters,including pH and MOF-AEP dosage,were ***,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.

关键词： advanced oxidation process alcohol solvent evaporation hydrogen bond S and Co co-doped carbon catalysts wastewater remediation

Targeting cholesterol trafficking to mitigate axonal degeneration in hereditary spastic paraplegia

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第5期20卷 1397-1398页

作者： Zhenyu Chen xue-Jun Li Department of Biomedical Sciences University of Illinois College of Medicine RockfordRockfordILUSA Department of Bioengineering University of Illinois at ChicagoChicagoILUSA

Axonal degeneration underlies many debilitating diseases including hereditary spastic paraplegia(HSP),a genetically and clinically diverse group of disorders characterized by spasticity and weakness of the lower *** is one significant cause of chronic neurodisability due to the lack of effective treatments and a wide range of onset ages from early childhood to 70 years.

关键词： degeneration diseases hereditary

Fluid structure interaction simulation of supersonic parachute inflation by an interface tracking method

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2020年第6期33卷 1692-1702页

作者： xue YANG Li yu Min LIU Haofei pang College of Aerospace Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China Engineering Design Center China Electronics Technology Group Corporation No.10 Research InstituteChengdu 610036China Key Laboratory of Aircraft Environment Control and Life Support Ministry of Industry and Information TechnologyNanjing University of Aeronautics&AstronauticsNanjing 210016China 505 Institute China Academy of Space TechnologyBeijing 100089China

An Arbitrary Lagrangian-Eulerian(ALE)approach with interface tracking is developed in this paper to simulate the supersonic parachute inflation.A two-way interaction between a nonlinear finite element method and a finite volume method is *** order to apply this interface tracking method to problems with instantaneous large deformation and self-contact,a new virtual structure contact method is proposed to leave room for the body-fitted mesh between the contact structural *** addition,the breakpoint due to the fluid mesh with negative volume is losslessly restarted by the conservative interpolation *** on this method,fluid and structural dynamic behaviors of a highly folded disk-gap-band parachute are *** results such as maximum Root Mean Square(RMS)drag,general canopy shape and the smallest canopy projected areas in the terminal descent state are in accordance with the wind tunnel test *** analysis reveals the inflation law of the disk-gap-band parachute and provides a new numerical method for supersonic parachute design.

关键词： Contact method Fluid structure interaction Inflation dynamics Numerical Simula lion:Supersonic paruchute