检索结果-南通市图书馆

NbB_(2)Modified Al-Cu Alloys Fabricated by Freeze-Ablation Casting under High Cooling Rate Solidification

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 921-938页

作者： Xiang Kong Yu Wang hong xu Haotian Fan Yuewu Zheng Beibei Xie School of Materials Science and Engineering North University of ChinaTaiyuan 030051China

At present,improving the properties of aluminum alloys is generally achieved by increasing the cooling rate of the melt and adding micro-nano *** the cooling rate of the melt to improve the refining effect of grain refiner is still a difficult problem in the aluminum alloy casting *** innovative and environmentally friendly casting process,known as freeze ablation,was introduced during the preparation of an Al–NbB_(2) intermediate *** process significantly enhanced the cooling rate of the *** results indicated that the Al–NbB_(2) intermediate alloy produced under high cooling rates had a noticeable refining effect on Al–Cu alloys,with smaller NbB2 particles demonstrating superior refining *** average grain size of the refined Al–Cu alloy decreased from 154 to 69μm,the tensile strength increased by 12%,the fluidity increased by 18.4%,and the hot tearing index decreased from 144 to *** matching degree between NbB_(2) andα-Al was calculated using high-resolution transmission electron microscopy and the edge-to-edge *** was found that the atomic interplanar spacing and the interatomic spacing mismatch between NbB_(2)’splane and Al were both less than 10%,which further proved that NbB2 could serve as an effective nucleation site forα-Al grains to achieve grain refinement.

关键词： Grain refinement Freeze ablation Particle size control Mechanical properties Process properties

Low interleukin-10 level indicates a good prognosis in Salmonella enterica serovar typhimurium-induced pediatric hemophagocytic lymphohistiocytosis:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第9期12卷 1660-1668页

作者： Yuan-Yuan Chen Xiang-Zhi xu xiao-Jun xu Division/Center of Pediatric Hematology Oncology Children’s HospitalZhejiang University School of MedicineHangzhou 310003Zhejiang ProvinceChina Pediatric Intensive Care Unit Children’s Hospital of Zhejiang University School of MedicineHangzhou 310003Zhejiang ProvinceChina

BACKGROUND Secondary hemophagocytic lymphohistiocytosis(sHLH)triggered by Salmonella enterica serovar Typhimurium is rare in pediatric *** is no consensus on how to treat ***-triggered *** SUMMARY A 9-year-old boy with intermittent fever for 3 d presented to our hospital with positive results for ***,human rhinovirus,and Mycoplasma pneumoniae *** the time of admission to our institution,the patient’s T helper 1/T helper 2 cytokine levels were 326 pg/mL for interleukin 6(IL-6),9.1 pg/mL for IL-10,and 246.7 pg/mL for interferon-gamma(IFN-γ),for which the ratio of IL-10 to IFN-γwas *** this study,the patient received meropenem,linezolid,and cefoperazone/sulbactam in combination with high-dose methylprednisolone therapy(10 mg/kg/d for 3 d)and antishock supportive treatment *** careful evaluation,this patient did not receive HLH chemotherapy and recovered *** *** infection-triggered sHLH patient had a ratio of IL-10 to IFN-γ≤1.33,an IL-10 concentration≤10.0 pg/mL,and/or an IFN-γconcentration≤225 pg/mL at *** antimicrobial and supportive treatment was sufficient,and the HLH-94/2004 protocol was not necessary under these conditions.

关键词： Hemophagocytic lymphohistiocytosis Cytokine pattern Interferon gamma Interleukin-10 Salmonella enterica serovar Typhimurium Case report

Unsteady aerodynamic noise prediction of contra-rotating open rotor using meshless method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第8期37卷 144-165页

作者： Zhiliang hong Meng SU Haitao ZHANG Zerui xu Lin DU Lingfeng CHEN College of Safety Science and Engineering Civil Aviation University of ChinaTianjin 300300China Civil Aviation Administration of China Beijing 100710China Research Institute of Aero-Engine Beihang UniversityBeijing 100191China

The Contra-Rotating Open Rotor(CROR)design confronts significant noise challenges despite being one of the possible options for future green *** efficiently estimate the noise emitted from a CROR,a three-dimensional unsteady prediction model based on the meshless method is *** unsteady wake flow and the aerodynamic load fluctuations on the blade are solved through the viscous vortex particle method,the blade element momentum theory and vortex lattice ***,the acoustic field is obtained through the Farassat’s formulation *** of this method is conducted on a CROR,and a mesh-based method,e.g.,Nonlinear Harmonic(NLH)method,is also employed for *** is found that the presented method is three times faster than NLH method while maintaining a comparable precision.A thorough parametric analysis is also carried out to illustrate the effects of rotational speed,rotor-rotor spacing and rear rotor diameter on the noise *** rotor speed is found to be the most influencing factor,and by optimizing the speed difference between the front and rear rotors,a notable noise reduction can be *** current findings not only contribute to a deeper comprehension of the CROR’s aeroacoustic properties but also offer an effective tool for engineering applications.

关键词： Contra-Rotating Open Rotor(CROR) Aerodynamic noise Blade element momentum theory Viscosity vortex particle method Farassat’s formulation 1A

A disk I/O optimized system for concurrent graph processing jobs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Computer Science 2024年第3期18卷 13-29页

作者： Xianghao xu Fang WANG hong JIANG Yongli CHENG Dan FENG Peng FANG School of Computer Science and Engineering Nanjing University of Science and TechnologyNanjing 210094China Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan 430074China Department of Computer Science&Engineering University of Texas at ArlingtonArlingtonTX 76019USA College of Computer and Data Science Fuzhou UniversityFuzhou 350108China Zhejiang Lab Hangzhou 311121China

In order to analyze and process the large graphs with high cost efficiency,researchers have developed a number of out-of-core graph processing systems in recent years based on just one commodity *** the other hand,with the rapidly growing need of analyzing graphs in the real-world,graph processing systems have to efficiently handle massive concurrent graph processing(CGP)***,due to the inherent design for single graph processing job,existing out-of-core graph processing systems usually incur unnecessary data accesses and severe competition of I/O bandwidth when handling the CGP *** this paper,we propose GraphCP,a disk I/O optimized out-of-core graph processing system that efficiently supports the processing of CGP *** proposes a benefit-aware sharing execution model to share the I/O access and processing of graph data among the CGP jobs and adaptively schedule the graph data loading based on the states of vertices,which efficiently overcomes above challenges faced by existing out-of-core graph processing ***,GraphCP adopts a dependency-based future-vertex updating model so as to reduce disk I/Os in the future *** addition,GraphCP organizes the graph data with a Source-Sorted Sub-Block graph representation for better processing capacity and I/O access *** evaluation results show that GraphCP is 20.5×and 8.9×faster than two out-of-core graph processing systems GridGraph and GraphZ,and 3.5×and 1.7×faster than two state-of-art concurrent graph processing systems Seraph and GraphSO.

关键词： graph processing disk I/O concurrent jobs

Electrolyte Design for Low‑Temperature Li‑Metal Batteries:Challenges and Prospects

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第2期16卷 365-382页

作者： Siyu Sun Kehan Wang Zhanglian hong Mingjia Zhi Kai Zhang Jijian xu Department of Chemistry City University of Hong KongHong Kong 999077People’s Republic of China State Key Laboratory of Silicon Materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China State Key Laboratory of Advanced Chemical Power Sources Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education)Haihe Laboratory of Sustainable Chemical TransformationsCollaborative Innovation Center of Chemical Science and Engineering(Tianjin)College of ChemistryNankai UniversityTianjin 300071People’s Republic of China Department of Chemical and Biomolecular Engineering University of Maryland College ParkCollege ParkMD 20742USA

Electrolyte design holds the greatest opportunity for the development of batteries that are capable of sub-zero temperature *** get the most energy storage out of the battery at low temperatures,improvements in electrolyte chemistry need to be coupled with optimized electrode materials and tailored electrolyte/electrode ***,this review critically outlines electrolytes’limiting factors,including reduced ionic conductivity,large de-solvation energy,sluggish charge transfer,and slow Li-ion transportation across the electrolyte/electrode interphases,which affect the low-temperature performance of Li-metal *** theoretical derivations that explain the explicit influence of temperature on battery performance are presented to deepen *** improvement strategies from the aspects of electrolyte design and electrolyte/electrode interphase engineering are summarized and rigorously *** on future research are proposed to guide the ongoing exploration for better low-temperature Li-metal batteries.

关键词： Solid electrolyte interphase Li metal Low temperature Electrolyte design Batteries

Recent developments in selective laser processes for wearable devices

在线全文

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第4期7卷 517-547页

作者： Youngchan Kim Eunseung Hwang Chang Kai Kaichen xu Heng Pan Sukjoon hong Optical Nanoprocessing Lab Department of Mechanical EngineeringBK21 FOUR ERICA-ACE CenterHanyang University55 Hanyangdaehak-RoSangnok-GuAnsan 15588Republic of Korea Multiscale Manufacturing Lab J.Mike Walker’66 Department of Mechanical EngineeringTexas A&M UniversityCollege StationTX 77843USA State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310058China

Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

关键词： Selective laser process Wearable device Transformative approach Laser-induced graphene Ablation Sintering Synthesis

Intelligent representation method of image flatness for cold rolled strip

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1177-1195页

作者： Yang-huan xu Dong-cheng Wang hong-min Liu Bo-wei Duan National Engineering Research Center for Equipment and Technology of Cold Strip Rolling Yanshan UniversityQinhuangdao066004HebeiChina National Key Laboratory of Metal Forming Technology and Heavy Equipment China National Heavy Machinery Research Institute Co.Ltd.Xi’an710018ShaanxiChina State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao066004HebeiChina

Real flatness images are the bases for flatness detection based on machine vision of cold rolled *** characteristics of a real flatness image are analyzed,and a lightweight strip location detection(SLD)model with deep semantic segmentation networks is *** interference areas in the real flatness image can be eliminated by the SLD model,and valid information can be *** this basis,the concept of image flatness is proposed for the first *** image flatness representation(IFAR)model is established on the basis of an autoencoder with a new *** optimal structure of the bottleneck layer is 16×16×4,and the IFAR model exhibits a good representation ***,interpretability analysis of the representation factors is carried out,and the difference and physical meaning of the representation factors for image flatness with different categories are *** flatness with new defect morphologies(bilateral quarter waves and large middle waves)that are not present in the original dataset are generated by modifying the representation factors of the no wave ***,the SLD and IFAR models are used to detect and represent all the real flatness images on the test *** average processing time for a single image is 11.42 ms,which is suitable for industrial *** research results provide effective methods and ideas for intelligent flatness detection technology based on machine vision.

关键词： Cold rolled strip Image flatness Location detection Representation learning Bottleneck layer

PDOL-Based Solid Electrolyte Toward Practical Application:Opportunities and Challenges

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第7期16卷 109-141页

作者： Hua Yang Maoxiang Jing Li Wang hong xu xiaohong Yan Xiangming He Institute for Advanced Materials School of Materials Science and EngineeringJiangsu UniversityZhenjiang 212013People’s Republic of China Institute of Nuclear and New Energy Technology Tsinghua UniversityBeijing 100084People’s Republic of China

Polymer solid-state lithium batteries(SSLB)are regarded as a promising energy storage technology to meet growing demand due to their high energy density and *** conductivity,interface stability and battery assembly process are still the main challenges to hurdle the commercialization of *** the main component of SSLB,poly(1,3-dioxolane)(PDOL)-based solid polymer electrolytes polymerized in-situ are becoming a promising candidate solid elec-trolyte,for their high ion conductivity at room temperature,good battery elec-trochemical performances,and simple assembly *** review analyzes opportunities and challenges of PDOL electrolytes toward practical application for polymer *** focuses include exploring the polymerization mechanism of DOL,the performance of PDOL composite electrolytes,and the application of ***,we provide a perspective on future research directions that need to be emphasized for commercialization of PDOL-based electrolytes in *** exploration of these schemes facilitates a comprehensive and profound understanding of PDOL-based polymer electrolyte and provides new research ideas to boost them toward practical application in solid-state batteries.

关键词： Poly(1,3-dioxolane) Solid electrolyte Polymerization mechanism Composite electrolyte Practical application

Singularity analysis and avoidance for an SSRMS-type reconfigurable space manipulator with a non-spherical wrist and two lockable passive telescopic links

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第8期37卷 435-459页

作者： Zhiyuan ZHAO xiaohang YANG Yuntao LI Zichun xu Jingdong ZHAO hong LIU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

This study focuses on addressing kinematic singularity analysis and avoidance issues for a space station remote manipulator system(SSRMS)-type reconfigurable space *** manipulator is equipped with a non-spherical wrist and two lockable passive telescopic links(LPTLs),which enable it to have both active revolute and passive prismatic joints and operate in two distinct *** begin with the kinematic singularity analysis,the study derives the differential kinematic equations for the manipulator and identifies the dominant Jacobian matrix that causes ***,an in-depth analysis of singularities from multiple perspectives is ***,a kinematic singularity map method is proposed to capture the distribution of singularities within the reachable ***,the influence of the two LPTLs on singularities is thoroughly ***,a new method based on the matrix rank equivalence principle is introduced to determine singularity conditions,enabling the identification of all the singular configurations for the SSRMS-type reconfigurable ***,this method significantly reduces computational complexity,and the singularity conditions obtained have more concise *** the singularity avoidance problem,a novel method is developed,which simultaneously addresses the requirements of real-time performance,high precision,and the avoidance of both kinematic singularities and joint limit *** from these excellent properties,the proposed method can effectively resolve the singularity issues encountered separately by the SSRMS-type reconfigurable manipulator in its two operational *** typical simulations validate the utility of all the proposed methods.

关键词： Reconfigurable space manipulator Redundant manipulator Kinematics Singularity analysis Singularity avoidance