检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第7期31卷 1746-1762页

作者： Wei Liu Hong-li Zhao Bing-xing Wang Yong Tian State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang 110819LiaoningChina

The high-strength low-alloy steel plates with varying Ni/Mo contents were manufactured using the thermos-mechanical control *** investigation was conducted to explore the effect of Ni/Mo microalloying on microstructure evolution and mechanical properties of the *** results revealed that the increase in Ni content from 1 to 2 wt.%reduced the transition temperature of ferrite and the growth range of ferritic grain was narrowed,which promoted grain *** optimized combination of grain size,high-angle grain boundaries(HAGBs),and martensite-austenite(M-A)islands parameter contributed to the excellent impact toughness of S1 steel at-100℃(impact absorbed energy of 218.2 J at-100℃).As the Mo increases from 0 to 2 wt.%,the matrix structure changes from multiphase structure to granular bainite,which increases the average effective grain size to~4.62 pm and reduces HAGBs proportion to~36.22%.With these changes,the low-temperature impact toughness of S3 steel is *** addition,based on the analysis of the characteristics of crack propagation path,it was found that M-A islands with low content(~2.21%)and small size(~1.76 pm)significantly retarded crack propagation,and the fracture model of M-A islands with different morphologies was further ***,correlation between behaviour of delamination and toughness was further analysed by observing delamination size and impact energy parameters.

关键词： High-strength low-alloy steel Microstructural regulation Ni addition Mo addition Crack propagation Low-temperature toughness

Time-delay effect and design of closed-loop control system of circulation control airfoil

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第10期37卷 50-67页

作者： Lingxiao Li Heyong XU Zheng xing Abdul Samad KHAN School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China National Key Laboratory of Aircraft Configuration Design Xi’an 710072China

In this paper,unsteady numerical simulation of jet Circulation Control(CC)is carried out with the NACA0012-CC airfoil as the research *** dynamic process from the opening of jet slot and adjustment of jet intensity to the stable state of jet control effect is *** time-delay effect and flow mechanism of jet are *** mechanism of jet momentum coefficient and moment coefficient fluctuating with time is *** fluctuation of jet momentum coefficient is caused by the change of the pressure coefficient distribution on the Coanda surface or the structure of the wave system inside the jet,and the oscillation frequency of the wave system structure of the under-expansion supersonic jet reaches 1481 Hz at the opening *** on the aerodynamic model and Proportional-Integral-Derivative(PID)control theory,the closed-loop control system of CC airfoil is *** parameters of PID control system are adjusted by the Genetic Algorithm(GA),which significantly improves the response ability of the control system to step,ramp and sine signals,and improves the dynamic performance of the *** at the special time-delay effect of jet control,Long Short-Term Memory(LSTM)neural network module is added to the control system to predict the target input signal,which strengthens the prediction ability of GA-PID control system to the target signal at the next time *** using LSTM neural network correction,the control hysteresis caused by jet time-delay effect is alleviated,and the response ability of the control system is effectively ***,the designed LSTM-GA-PID control system is applied to the NACA0012-CC airfoil for the pitch control simulation *** test results show that the control system designed in this paper has good dynamic performance and can respond quickly and accurately to complex input signals,which confirms the effectiveness of the control system.

关键词： Circulation control Unsteady numerical simulation Time-delay effect Control system Long short-term memory

HDPairFinder:A data processing platform for hydrogen/deuterium isotopic labeling-based nontargeted analysis of trace-level amino-containing chemicals in environmental water

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第2期136卷 583-593页

作者： Tingting Zhao Kristin Carroll Caley B.Craven Nicholas J.P.Wawryk Shipei xing Jian Guo xing-Fang Li Tao Huan Department of Chemistry Faculty of ScienceUniversity of British ColumbiaVancouver Campus2036 Main MallVancouverBritish ColumbiaV6T 1Z1Canada Division of Analytical and Environmental Toxicology Department of Laboratory Medicine and PathologyFaculty of Medicine and DentistryUniversity of AlbertaEdmontonAlberta T6G 2G3Canada

The combination of hydrogen/deuterium(H/D)formaldehyde-based isotopic methyl labeling with solid-phase extraction and high-performance liquid chromatography–high resolution mass spectrometry(HPLC-HRMS)is a powerful analytical solution for nontargeted analysis of trace-level amino-containing chemicals in water *** the huge amount of chemical information generated in HPLC-HRMS analysis,identifying all possible H/Dlabeled amino chemicals presents a significant challenge in data *** address this,we designed a streamlined data processing pipeline that can automatically extract H/D-labeled amino chemicals from the raw HPLC-HRMS data with high accuracy and ***,we developed a cross-correlation algorithm to correct the retention time shift resulting from deuterium isotopic effects,which enables reliable pairing of H-and D-labeled ***,we implemented several bioinformatic solutions to remove false chemical features generated by in-source fragmentation,salt adduction,and natural13C ***,we used a data mining strategy to construct the AMINES library that consists of over 38,000 structure-disjointed primary and secondary amines to facilitate putative compound ***,we integrated these modules into a freely available R program,*** rationale of each module was justified and its performance tested using experimental H/D-labeled chemical standards and authentic water *** further demonstrated the application of HDPairFinder to effectively extract N-containing contaminants,thus enabling the monitoring of changes of primary and secondary N-compounds in authentic water *** is a reliable bioinformatic tool for rapid processing of H/D isotopic methyl labeling-based nontargeted analysis of water samples,and will facilitate a better understanding of N-containing chemical compounds in water.

关键词： Isotope labeling Nontargeted analysis Reactive N-compounds HPLC-HRMS Source water

Micro-vibration suppression and compensation techniques for in-orbit satellite:A review

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第9期37卷 1-19页

作者： Weida xing Weixiao TUO xingfei LI Tianyu WANG Chenxi YANG State Key Laboratory of Precision Measurement Technology and Instruments Tianjin UniversityTianjin 30072China Taihu Laboratory of Deepsea Technological Science Wuxi 214123China

Micro-vibration is an important factor affecting the imaging quality and pointing accu-racy of the in-orbit *** address the problem of micro-vibration compensation,a general summary for modeling,analysis,suppression,and compensation approach should be *** this review,micro-vibration characteristics and its impacts on the payloads are firstly ***,methods for micro-vibration measurement are *** detail,the principles and practical applications of these methods are ***,advanced technologies for micro-vibration suppression are summarized from micro-vibration source attenuation,transfer path opti-mization and sensitive load *** approaches have been found to be effective for micro-vibration *** one is the Line-of-Sight(LOS)stabilization assisted with Inertial Ref-erence Unit(IRU).The other is using image restoration technology to remove the blur caused by platform *** compensation technique and research status of the two techniques are *** work will provide researchers with technical guidelines for micro-vibration suppression.

关键词： In-orbit Satellite Micro-vibration suppression Compensation technique Vibration isolation Path optimization

Application of Optical Hydrogels in Environmental Sensing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 311-336页

作者： Shuo Yang Shruti Sarkar xing Xie Dan Li Jianmin Chen Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention(LAP3) Department of Environmental Science and EngineeringFudan UniversityShanghai 200438China School of Civil and Environmental Engineering Georgia Institute of TechnologyAtlanta Georgia 30332USA

The ever-increasing complexity of environmental pollutants urgently warrants the development of new detection *** based on the optical properties of hydrogels enabling fast and easy in situ detection are attracting increasing *** this paper,the data from 138 papers about different optical hydrogels(OHs)are extracted for statistical *** detection performance and potential of various types of OHs in different environmental pollutant detection scenarios were evaluated and compared to those obtained using the standard detection *** on this analysis,the target recognition and sensing mechanisms of two main types of OHs are reviewed and discussed:photonic crystal hydrogels(PCHs)and fluorescent hydrogels(FHs).For PCHs,the environmental stimulus response,target receptors,inverse opal structures,and molecular imprinting techniques related to PCHs are reviewed and ***,the different types of fluorophores(i.e.,compound probes,biomacromolecules,quantum dots,and luminescent microbes)of FHs are ***,the potential academic research directions to address the challenges of applying and developing OHs in environmental sensing are proposed,including the fusion of various OHs,introduction of the latest technologies in various fields to the construction of OHs,and development of multifunctional sensor arrays.

关键词： environmental sensors fluorescent hydrogel optical hydrogel photonic crystal hydrogel pollution detection

Microwave irradiation-induced alterations in physicochemical properties and methane adsorption capability of coals:An experimental study using carbon molecular sieve

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 165-180页

作者： Xuexiang Fu xing Tang Yi Xu Xintao Zhou Dengfeng Zhang Faculty of Chemical Engineering Kunming University of Science and TechnologyKunming 650500China

In order to comprehend the applicability of microwave irradiation for recovering coalbed methane,it is necessary to evaluate the microwave irradiation-induced alterations in coals with varying levels of *** this work,the carbon molecular sieve combined with KMnO_(4)oxidation was selected to fabricate carbon molecular sieve with diverse oxidation degrees,which can serve as model substances toward ***,the microwave irradiation dependences of pores,functional groups,and highpressure methane adsorption characteristics of model substances were *** results indicated that microwave irradiation causes rearrangement of oxygen-containing functional groups,which could block the micropores with a size of 0.40-0.60 nm in carbon molecular sieve;meanwhile,naphthalene and phenanthrene generated by macro-molecular structure pyrolysis due to microwave irradiation could block the micropores with a size of 0.70-0.90 *** alterations in micropore structure weaken the saturated methane adsorption capacity of oxidized carbon molecular sieve by 2.91%-23.28%,suggesting that microwave irradiation could promote methane ***,the increased mesopores found for oxidized carbon molecular sieve after microwave irradiation could benefit CH4 *** summary,the oxidized carbon molecular sieve can act as model substances toward coals with different ***,microwave irradiation is a promising technology to enhance coalbed methane recovery.

关键词： Microwave irradiation Physicochemical property Coal matrix Adsorption Carbon molecular sieve

Aerial refueling scheduling of multi-receiver and multi-tanker under spatial-temporal constraints for forest firefighting

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第5期37卷 71-91,I0001页

作者： Jing HUANG Jiaqi xing Jinrui REN Quan QUAN Youmin ZHANG Department of Information and Control Engineering Xi’an University of TechnologyXi’an 710048China Jiujiang Measuring Test Technology Research Institute Jiujiang 332000China School of Automation Science and Electrical Engineering Beihang UniversityBeijing 100191China School of Automation Xi’an University of Posts&TelecommunicationsShaanxiXi’an 710121China Department of Mechanical Industrial and Aerospace EngineeringConcordia UniversityMontreal H3G 1M8Canada

Forest fires pose a significant threat to human life and property,so the utilization of unmanned aircraft systems provides new ways for forest *** the constrained load capacities of these aircraft,aerial refueling becomes crucial to extend their operational time and *** order to address the complexities of firefighting missions involving multi-receiver and multi-tanker deployed from various airports,first,a fuel consumption calculation model for aerial refueling scheduling is established based on the receiver ***,two distinct methods,including an integrated one and a decomposed one,are designed to address the challenges of establishing refueling airspace and allocating tasks for *** methods aim to optimize total fuel consumption of the receivers and tankers within the aerial refueling scheduling *** optimization problem is established as nonlinear optimization models along with *** integrated method seamlessly combines refueling rendezvous point scheduling and tanker task allocation into unified *** has a complete solution space and excels in optimizing total fuel *** decomposed method,through the separation of rendezvous point scheduling and task allocation,achieves a reduced computational ***,this comes at the cost of sacrificing optimality by excluding specific feasible ***,numerical simulations are carried out to verify the feasibility and effectiveness of the proposed *** simulations yield insights crucial for the practical engineering application of both the integrated and decomposed methods in real-world *** comprehensive approach aims to enhance the efficiency of forest firefighting operations,mitigating the risks posed by forest fires to human life and property.

关键词： Aerial refueling Scheduling Planning Spatial-temporal constraint Firefighting

An Adaptive Local Grid Nesting-based Genetic Algorithm for Multi-earth Observation Satellites' Area Target Observation

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Science and Systems Engineering 2024年第2期33卷 232-258页

作者： Ligang xing Wei Xia Xiaoxuan Hu Waiming Zhu Yi Wu School of Management Hefei University of TechnologyHefei 230009China Key Laboratory of Process Optimization and Inteligent Decision-making Ministry of EducationHefei 230009China Intelligent Interconnected Systems Laboratory of Anhui Province Hefei 230009China

The Scheduling of the Multi-EOSs Area Target Observation(SMEATO)is an EOS resource schedul-ing problem highly coupled with computational *** advances in EOS technology and the ex-pansion of wide-area remote sensing applications have increased the practical significance of *** this paper,an adaptive local grid nesting-based genetic algorithm(ALGN-GA)is proposed for developing SMEATO ***,a local grid nesting(LGN)strategy is designed to discretize the target area into parts,so as to avoid the explosive growth of calculations.A genetic algorithm(GA)framework is then used to share reserve information for the population during iterative evolution,which can generate high-quality solutions with low computational *** this basis,an adaptive technique is introduced to determine whether a local region requires nesting and whether the grid scale is *** effectiveness of the proposed model is assessed experimentally with nine randomly generated tests at different *** results show that the ALGN-GA offers advantages over several conventional algorithms in 88.9%of instances,especially in large-scale *** fully demonstrate the high efficiency and stability of the ALGN-GA.

关键词： Multi-EOSs scheduling area target observation adaptive genetic algorithm local grid nesting

Corrosion of Duplex Stainless Steel Manufactured by Laser Powder Bed Fusion: A Critical Review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 587-606页

作者： Yiqi Zhou Decheng Kong Ruixue Li xing He Chaofang Dong Beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing100083China Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming School of Materials Science and EngineeringShanghai Jiao Tong UniversityShanghai200240China

Laser powder bed fusion (LPBF) is a commonly used additive manufacturing (AM) method for efficiently producing intricate geometric components. This investigation examines factors such as pores, cellular structure, grain size, and inclusions from the manufacturing process that contribute to the corrosion resistance of LPBF DSS. Furthermore, the as-built LPBF duplex stainless steel (DSS) is primarily ferrite due to the rapid cooling process. Therefore, the transformation of ferrite to austenite after various heat treatments in LPBF DSS and its corresponding corrosion resistance are presented. Additionally, a new mixed powder method is proposed to increase the austenite content in the as-built LPBF DSS. This review also focuses on the passivation capability and pitting corrosion performance in LPBF and conventional DSS. This article summarizes the variations in microstructure between as-built and heat-treated LPBF DSS, with their impacts on corrosion resistance, offering insights for manufacturing highly corrosion-resistant LPBF DSS.

关键词： Laser powder bed fusion Duplex stainless steel Microstructure Heat treatment Passivation Pitting corrosion

Fabrication of Biomimetic Surface for Hydrophobic and Anti-icing Purposes via the Capillary Force Lithography

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第1期21卷 74-83页

作者： Wenqiang xing Yiping Tang Fengzhou Zhao Lichun Zhang Dengying Zhang School of Physics and Optoelectronic Engineering Ludong UniversityYantai 264025China

In this paper,inspired by lotus leaf surfaces,we fabricated biomimetic multi-scale micro-nano-structures by Two-Step Capillary Force Lithography(TS-CFL)and UV-assisted Capillary Force Lithography(UV-CFL).The experimental results indicated that TS-CFL was unfitted to fabricate large-area multi-scale ***,UV-CFL can fabricate large-area multi-scale *** discussed the hydrophobic and anti-icing properties of the biomimetic surfaces fabricated by these two *** found that small structures are significant for improving the hydrophobic anti-icing properties of single-structured or structureless *** believe that these results can complement the experimental details of both technologies and enable the development of more interesting micro-nano-structures biomimetic surfaces by both technologies in the future.

关键词： Capllary force lithography Biomimetic lotus leaf Multi-scale structures Hydrophobic Anti-icing