检索结果-南通市图书馆

Chinese Journal of Polymer Science 2015年第12期33卷 1672-1682页

作者： Shu-juan Zhang 张小岗 wen-ting shang Department of Chemistry Renmin University of China

Potassium methyl siliconate （PMS） was investigated as a simple physicochemical modification in aged paper using silane coupling technique. The PMS-based solution was shown to favor penetration in the cellulose fibers on the paper with suitable uptakes being achieved at low concentrations. The studies of the physicochemical properties of the treated paper （mechanical strength and alkalinity） demonstrated that, besides the required deacidification feature and high level of alkali reserves, the immersion treatment by PMS allowed the enhancement of the mechanical intensities of paper arising from the interaction between Si--OH generated in hydrolysis of PMS and C--OH of cellulose on the paper. Adding ethanol into PMS solution could significantly improve mechanical properties of the aged paper treated by the formula apart from modifying the flatness of the paper. Optimized treatment process was achieved by altering the ratio of ethanol to water in PMS-based solutions. Contact angle measurements indicated the occurrence of hydrophobic character of the papers in immersion treatment with PMS-based solutions. The easy availability of the materials and simplicity of the method rendered it convenient for treatment for aged paper documents.

关键词： Potassium methyl siliconate Paper Deacidification Reinforcement Ageing.

Effects of carbon content on the microstructure and tensile properties of a low-density steel

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 391-401页

作者： Yongxuan shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight Materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

A bio-inspired optical imaging method for robotic perception in turbid water

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年第1期 79-81页

作者： Xudong SUN Yafeng LI Peng LIN Xiaodi shang Xianping FU School of Information Science and Technology Dalian Maritime University College of Computer Science and Technology Qingdao University

In the realm of underwater robotics, optical imaging plays a pivotal role in many scientific researches. Due to the effects of absorption and scattering,images captured in turbid water are severely degraded. Therefore, enhancing the quality of underwater optical images stands paramount in ensuring the continued advancement and efficacy of underwater robots across its multifarious applications.

关键词：

Unraveling the significance of cobalt on transformation kinetics,crystallography and impact toughness in high-strength steels

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 380-390页

作者： Yishuang Yu Jingxiao Zhao Xuelin Wang Hui Guo Zhenjia Xie Chengjia shang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing 100083China School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China

This work reveals the significant effects of cobalt(Co)on the microstructure and impact toughness of as-quenched highstrength steels by experimental characterizations and thermo-kinetic *** results show that the Co-bearing steel exhibits finer blocks and a lower ductile-brittle transition temperature than the steel without ***,the Co-bearing steel reveals higher transformation rates at the intermediate stage with bainite volume fraction ranging from around 0.1 to *** improved impact toughness of the Co-bearing steel results from the higher dense block boundaries dominated by the V1/V2 variant ***,the addition of Co induces a larger transformation driving force and a lower bainite start temperature(BS),thereby contributing to the refinement of blocks and the increase of the V1/V2 variant *** findings would be instructive for the composition,microstructure design,and property optimization of high-strength steels.

关键词： high-strength steel cobalt transformation kinetics crystallography impact toughness

Numerical and Experimental Investigation of Hydrodynamic Interactions of Two VLFS Modules Deployed in Tandem

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2020年第1期34卷 46-55页

作者： WANG Yi-ting WANG Xue-feng XU Sheng-wen WANG Lei shang Yongzhi State Key Laboratory of Ocean Engineering Shanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration(CISSE) Shanghai 200240China School of Naval Architecture Ocean and Civil EngineeringShanghai Jiao Tong UniversityShanghai 200240China Division of Research and Development Shanghai Shocktorm Ocean Engineering Co.Ltd.Shanghai 201306China

This paper numerically and experimentally investigates the hydrodynamic interaction between two semi-submersible type VLFS modules in the frequency domain. Model tests were conducted to investigate the relationship between interactions and wave headings. Numerical studies were performed by solving the radiation-diffraction problem and were validated against the experimental results. Motion Response Amplitude Operators (RAOs) were obtained from numerical and experimental studies. The dependency of the hydrodynamic interaction effect on wave headings is clarified. The influence of different wave periods on the motion responses of two-module VLFS and wave elevations in the gap is studied. The results indicate that the hydrodynamic interactions of the two modules are directly related to the wave headings and the periods of the incident wave. The shielding effect plays an important role in short wave, and the influence decreases with the increase of the incident wavelength. The numerical results based on the diffraction-radiation code can give a relatively good estimation to the responses in short wave while for long wave, it would over-predict the response.

关键词： hydrodynamic interaction numerical analysis model test two semi-submersible type VLFS modules

Structural Modal Parameter Recognition and Related Damage Identification Methods under Environmental Excitations: A Review

在线全文

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 25-54页

作者： Chao Zhang shang-Xi Lai Hua-Ping Wang School of Civil Engineering and Mechanics Lanzhou UniversityLanzhou730000China Key Laboratory of Special Functional Materials and Structural Design Ministry of EducationLanzhou UniversityLanzhou730000China

Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the ***,it is particularly signiﬁcant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientiﬁc basis for structural damage identiﬁcation and dynamic model modiﬁ*** view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and brieﬂy describes how to identify structural damages based on the derived modal *** paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),brieﬂy describes damage identiﬁcation methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artiﬁcial intelligence(AI)methods in the direction of modal parameter recognition and damage identiﬁcation is further *** on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identiﬁcation methods are given to provide scientiﬁc references for the optimized design and functional upgrading of SHM systems.

关键词： Structural health monitoring data information modal parameters damage identiﬁcation AI method

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 154-168页

作者： Fei weng Guijun Bi Youxiang Chew shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China Institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore Institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

Construction of 3D porous Cu_(1.81)S/nitrogen-doped carbon frameworks for ultrafast and long-cycle life sodium-ion storage

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 191-200页

作者： Chen Chen Hongyu Xue Qilin Hu Mengfan Wang Pan shang Ziyan Liu Tao Peng Deyang Zhang Yongsong Luo Key Laboratory of Microelectronics and Energy of Henan Province Henan Joint International Research Laboratory of New Energy Storage TechnologyCollege of Physics and Electronic EngineeringXinyang Normal UniversityXinyang 464000China School of Physics and Electronic Engineering Nanyang Normal UniversityNanyang 473061China

Transition metal sulfides have great potential as anode mterials for sodium-ion batteries(SIBs)due to their high theoretical specific ***,the inferior intrinsic conductivity and large volume variation during sodiation-desodiation processes seriously affect its high-rate and long-cyde performance,unbeneficial for the application as fast-charging and long-cycling SIBs ***,the three-dimensional porous Cu_(1.81)S/nitrogen-doped carbon frameworks(Cu_(1.81)S/NC)are synthesized by the simple and facile sol-gel and annealing processes,which can accommodate the volumetric expansion of Cu_(1.81)S nanoparticles and accelerate the transmission of ions and electrons during Na^(+)insertion/extraction processes,exhibiting the excellent rate capability(250.6 mA·g^(-1)at 20.0 A·g^(-1))and outstanding cycling stability(70% capacity retention for 6000 cycles at 10.0 A·g^(-1))for ***,the Na-ion full cells coupled with Na_(3)V_(2)(PO_(4))_(3)/C cathode also demonstrate the satisfactory reversible specific capacity of 330.5 mAh·g^(-1)at 5.0 A·g^(-1)and long-cycle performance with the 86.9% capacity retention at 2.0 A·g^(-1)after 750 *** work proposes a promising way for the conversionbased metal sulfides for the applications as fast-charging sodium-ion battery anode.

关键词： copper sulfide nanoparticles porous carbon framework fast charging long-cycle performance sodium-ion full batteries

Simulation of Surface-Induced Morphology Transition and Phase Diagram of Linear Triblock Copolymers under Spherical Confinement

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2023年第1期41卷 166-178页

作者： Ji Wu shang-ting Chen Shi-Ben Li Lu-Ming Liu Xiang-Hong Wang wen-Chang Lang Key Laboratory of Surface modification of Polymer Materials Wenzhou PolytechnicWenzhou325035China Department of Physics Wenzhou UniversityWenzhou325035China Department of Mechanical Engineering Shanghai Technical Institute of Electronics&InformationShanghai201411China

In this work,the nanostructures and phase diagrams of lamella-forming and cylinder-forming ABC linear triblock copolymers confined in spherical cavities are investigated on the basis of real-space self-consistent field *** designate specific monomer-monomer interactions and block composition and study morphology transformation under spherical confinement with a neutral *** potentially valuable morphological structures,such as two-or three-colored spheres,rotational structures,and biconcave disklike structures,are identified in the phase diagrams constructed on confining *** confinement induces an obvious transformation of self-assembled structures,which still retain some of the conformational properties of bulk *** then focus on phase morphology under preferential *** can smooth out differences in block ratios,and similar structures can be assembled from block copolymers with different *** incorporate a non-centrosymmetric feature into our spherical confinement model and design a Janus adsorption field to explore unpredictable microphase *** show that the unbalance of the block ratio causes adsorption to exert a stable shaping effect on *** influence of confinement on the degree of freedom of polymer chains disrupts the influence of adsorption on the complexity and transformation activity of self-assembled *** theoretical results correspond to recent experimental observations and contribute to the field functional material synthesis.

关键词： Triblock copolymer Self-assembly structure Phase transition Three-dimensional confinement Surface adsorption

Adsorbed and free gas occurrence characteristics and controlling factors of deep shales in the southern Sichuan Basin,China

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2023年第3期20卷 1301-1311页

作者： shang-wen Zhou Dong-Xiao Zhang Department of Energy and Resources Engineering College of EngineeringPeking UniversityBejing100871China PetroChina Research Institute of Petroleum Exploration and Development Beijing100083China School of Environmental Science and Engineering Southern University of Science and TechnologyShenzhenGuangdong 518055China

Deep shale gas(3500-4500 m)will be the important succeeding field for the growth of shale gas production in *** the condition of high temperature and high pressure in deep shale gas reservoirs,its gas occurrence characteristics are markedly different from those of medium and shallow *** elucidate the gas occurrence characteristics and controlling factors of deep shales in the Wufeng-Longmaxi Formation,methane adsorption,low-temperature N2,and cO2 adsorption experi-ments were *** results show that in deep shales,the mesopores provide approximately 75%of the total specific surface area(SA)and 90%of the total pore volume(PV).Based on two hypotheses and comparing the theoretical and actual adsorption capacity,it is speculated that methane is adsorbed in deep shale in the form of micropore filling,and free gas is mainly stored in the *** analysis demonstrated that ToC is the key material constraint for the adsorption capacity of deep shale,and micropore SSA is the key spatial *** minerals and mesopore parameters have limited effect on the amount of adsorbed ***,the free gas content ranges from 2.72 m^(3)/t to 6.20 m^(3)/t,with an average value of 4.60 m^(3)/t,and the free gas content ratio is approximately 58%,suggesting that the deep shale gas reservoirs are dominated by free *** ratio may also increase to approximately 70%when considering the formation temperature effect on adsorbed *** density,porosity,and gas saturation are the main controlling factors of free gas content,resulting in significantly larger free gas content in deep shale than in shallower formations.

关键词： Adsorbedgas Free gas Gas occurrence characteristics Deep shale