检索结果-南通市图书馆

Metal-organic frameworks with dinuclear metal centers for synergistically boosting CO2 photoreduction

Science China Chemistry 2025年第1期68卷 201-208页

作者： Hui-Feng Wang wen-jie shi Yu-Xin Yang Bao-Xia Dong Tong-Bu Lu Di-Chang Zhong School of Chemistry and Chemical Engineering Yangzhou University Institute for New Energy Materials and Low Carbon Technologies School of Materials Science and Engineering Tianjin University of Technology

Dinuclear metal synergistic catalysis （DMSC） has been proved powerful in boosting CO2reduction,while this has not been achieved in heterogeneous catalysts with long-range order *** this study,we,by introduction of metal catalytic centers into an indium-based metal-organic framework （MOF）,obtained a series of isostructural In-MOFs,including three MOFs with mononuclear metal catalytic center （M-In）,three MOFs with dinuclear homometallic catalytic centers （MM-In）,and three MOFs with dinuclear heterometallic catalytic centers (MM’-In,M/M’=Co（II）,Ni（II）,Zn（II）).It was found that all these MOFs can serve as catalysts for photochemical CO2reduction to *** with M-In,the catalytic activities of MM-In were obviously enhanced,and that of MM’-In was further significantly *** example,the CO yield of Co Zn-In reaches a record value of 12,700μmol g-1h-1,which is 4.0,8.1,9.4,and 18.6-fold higher than that of Co Co-In,Zn Zn-In,Co-In,and Zn-In,***,the catalytic activities of Co Ni-In and Ni Zn-In also show different fold increase than those of corresponding dinuclear homometallic and mononuclear metallic *** results of control experiments and theoretical calculation reveal that the higher catalytic activities of MM-In over M-In can be ascribed to the DMSC effect,and the higher catalytic activity of MM’-In over MM-In can be ascribed to the strengthened DMSC *** work reveals the relationship between DMSC effect and bimetal centers in CO2reduction,which provides new insights into the DMSC and paves a new way to design highly active catalysts for photochemical CO2reduction.

关键词： metal-organic frameworks dinuclear metal centers synergistic catalysis CO2 reduction photocatalysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Recent progress in metal-organic frameworks(Part II—material application)

引用

Science China Chemistry 2025年

作者： Jiandong Pang wentao Jiang Xue-wen Zhang Hao-Long Zhou Yuxiu Sun Wei Gong Bin Wang Fuyin Ma Linwei He Long Chen Qiang Chen He-Qi Zheng Yuanjing Cui wen-jie shi Chao Zhang Mei Wang Yue-Biao Zhang jie-Peng Zhang Chongli Zhong Yong Cui Shuao Wang Jian-Rong Li Guodong Qian Tong-Bu Lu Huan Pang Xian-He Bu Institute for New Energy Materials and Low Carbon Technologies School of Materials Science and Engineering Tianjin University of Technology School of Chemistry and Chemical Engineering Yangzhou University School of Materials Science and Engineering Nankai University School of Physical Science and Technology ShanghaiTech University MOE Key Laboratory of Bioinorganic and Synthetic Chemistry GBRCE for Functional Molecular Engineering School of Chemistry IGCMESun Yat-sen University Department of Chemistry Shantou University School of Chemical Engineering and Technology Tiangong University School of Chemistry and Chemical Engineering Shanghai Jiao Tong University State Key Laboratory of Radiation Medicine and Protection School for Radiological and Interdisciplinary Sciences Soochow University College of Materials Science & Engineering Beijing University of Technology State Key Laboratory of Silicon and Advanced Semiconductor Materials Cyrus Tang Center for Sensor Materials and ApplicationsSchool of Materials Science & Engineering Zhejiang University

As a class of functional crystalline porous materials, metal-organic frameworks(MOFs) gained rapid development in the past three decades and a large number of MOFs with ordered structures, high surface areas, and functionalized channels have been investigated. MOFs and MOF-derived/composite materials show great potential in many application fields. In this review, we discussed the main applications of MOFs and MOF-derived/composite materials in small molecule storage, separation, luminescence, sensing, multitype catalysis, and energy storage. In addition, challenges and problems in the future research of MOFsrelated fields are also discussed.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Generalized Polynomial Chaos for Nonlinear Random Pantograph Equations

引用

Acta Mathematicae Applicatae Sinica 2016年第3期32卷 685-700页

作者： wen-jie shi Cheng-jian ZHANG School of mathematics and statistics Huazhong University of Science and Technology School of Mathematics and Computer Science Wuhan Textile University

This paper is concerned with the application of generalized polynomial chaos （gPC） method to nonlinear random pantograph equations. An error estimation of gPC method is derived. The global error analysis is given for the error arising from finite-dimensional noise （FDN） assumption, projection error, aliasing error and discretization error. In the end, with several numerical experiments, the theoretical results are further illustrated.

关键词： generalized polynomial chaos random pantograph equations error estimation finite-dimensional noise

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bottom-up construction of mesoporous supramolecular isomers based on a Pd_(3)L_(6) triangular prism as templates for shape specific aggregation of polyiodide

引用

Nano Research 2022年第3期15卷 2655-2660页

作者： wen-jie shi Xin Li Peng Li Ying-Feng Han Key Laboratory of Synthetic and Natural Functional Molecule of the Ministry of Education College of Chemistry and Materials ScienceNorthwest UniversityXi’an 710127China Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Department of ChemistryFudan UniversityShanghai 200438China

Bottom-up construction of highly complex architecture from simple components remains one of the long-standing challenges in *** two supramolecular isomers based on large trigonal prismatic Pd_(3)L^(1)_(6)building block are ***,they can be controllably obtained by adjusting the solute concentration during crystal ***,the square shape crystals,α-[Pd_(3)L^(1)_(6)](PF_(6))_(12)in the cubic system with I143 m space group,can be isolated from a high-concentration solution of Pd_(3)L^(1)_(6).Interestingly,a mesoporous cage assembled from eight Pd_(3)L^(1)_(6)units with a diameter of 24Åis observed in the crystal *** the low-concentration solution of Pd_(3)L^(1)_(6),the rectangular shape crystalsβ-[Pd_(3)L^(1)_(6)](PF_(6))_(12)are obtained,which crystallize in the hexagonal system with P 63/m space group,and display two-dimension packing pattern and one-dimension mesoporous channels(diameter ca.22Å)along the c ***,the two supramolecular isomers were used as nanoporous reactors to induce the specific formation of polyiodides with different compositions and shapes as evidenced from single crystal X-ray diffraction *** findings provide a reference in targeting functional crystalline mesoporous supramolecular materials from a single complex building unit.

关键词： supramolecular isomers crystal growth self-assembly polyiodide concentration effect mesoporous supramolecular material

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Diagnostic value of four serum exosome microRNAs panel for the detection of colorectal cancer

引用

World Journal of Gastrointestinal Oncology 2021年第8期13卷 970-979页

作者： Lei Han wen-jie shi Yi-Bin Xie Zhi-Guo Zhang Department of Oncology Beijing Daxing District People’s HospitalBeijing 102600China Department of Medicine Innovation Research Chinese PLA General HospitalBeijing 100853China Department of Pancreatic and Gastric Surgery National Cancer Center/National Clinical Research Center for Cancer/Cancer HospitalChinese Academy of Medical Sciences and Peking Union Medical CollegeBeijing 100121China

BACKGROUND Early detection,early diagnosis,and early treatment are currently accepted methods that can effectively improve the efficacy of colorectal cancer(CRC)*** were demonstrated to be potential tumor molecular *** To evaluate the diagnostic value of CRC by detecting four exosomal microRNAs(miRNAs)(miR-15b,miR-16,miR-21,and miR-31)that were demonstrated to have potential diagnostic value in *** Relative expression levels of miR-15b,miR-16,miR-21,and miR-31 in 123 CRC,117 colorectal adenoma,and 150 healthy controls were detected,and single and panel models were *** 2-ΔΔCt method was used to calculate the relative expression of miRNA compared to the internal control(U6).Eighty-one CRC patients,67 colorectal adenoma patients,and 90 healthy controls were used for *** Compared to the healthy control group,the best indicator of the four miRNAs was miR-15b,and the sensitivity and specificity were 81.33%and 91.80%,*** miR-15b,miR-21,and miR-31 individually,the sensitivity and specificity were 91.95%and 97.62%,95.06%and 94.44%,*** to the colorectal adenoma group,miR-15b,miR-16,and miR-21 in the CRC group showed significant differences(P<0.05).The best single indicator was miR-16,with a sensitivity and specificity of 79.05%and 71.55%.The sensitivity and specificity of a panel that included miR-15b,miR-16,and miR-21 were 81.21%and 81.03%,and 85.19%and 82.09%,respectively,in the *** We built and validated a diagnostic model containing miR-15b,miR-21,and miR-31 expression levels to discriminate the healthy control group and CRC group,and its sensitivity and specificity were 95.06%and 94.44%,*** miR-15b,miR-16,and miR-21 panel was used to discriminate the colorectal adenoma group and CRC group with a sensitivity and specificity of 85.19%and 82.09%,respectively.

关键词： Colorectal cancer Exosome Serum miRNAs Biomarker

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts： A review

引用

Frontiers of Mechanical Engineering 2015年第2期10卷 111-125页

作者： Bo SONG Xiao ZHAO Shuai LI Changjun HAN Qingsong WEI shifeng wen jie LIU Yusheng shi State Key Laboratory of Materials Processing and Die & MouldTechnology Huazhong University of Science and Technology Wuhan430074 China

Selective laser melting （SLM）, as one of the additive manufacturing technologies, is widely investigated to fabricate metal parts. In SLM, parts are manufactured directly from powders in a layer-by-layer fashion; SLM also provides several advantages, such as production of complex parts with high three-dimensional accuracy, compared with other additive manufacturing technologies. Therefore, SLM can be applied in aeronautics, astronautics, medicine, and die and mould industry. However, this technique differs from traditional methods, such as casting and forging; for instance, the former greatly differs in terms of microstructure and properties of products. This paper summarizes relevant studies on metal material fabrication through SLM. Based on a work completed in Huazhong Univ. Sci Tech., Rapid Manuf. Center （HUST-RMC） and compared with characteristics described in other reported studies, microstructure, properties, dimensional accuracy, and application of SLM are presented.

关键词： selective laser melting microstructure performance application

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Construction of Genetic Linkage Map Based on SSR Markers in Peanut(Arachis hypogaea L.)

引用

Agricultural Sciences in China 2008年第8期7卷 915-921页

作者： HONG Yan-bin LIANG Xuan-qiang CHEN Xiao-ping LIU Hai-yan ZHOU Gui-yuan LI Shao-xiong wen shi-jie Crops Research Institute Guangdong Academy of Agricultural Sciences Guangzhou 510640 P.R.China

Molecular genetic maps of crop species can be used in a variety of ways in breeding and genomic research such as identification and mapping of genes and quantitative trait loci （QTLs） for morphological, physiological and economic traits of crop species. However, a comprehensive genetic linkage map for cultivated peanut has not yet been developed due to the extremely low frequency of DNA polymorphism in cultivated peanut. In this study, 142 recombinant inbred lines （RILs） derived from a cross between Yueyou 13 and Zhenzhuhei were used as mapping population in peanut （Arachis hypogaea L.）. A total 652 pairs of genomic-SSR primer and 392 pairs of EST-SSR primer were used to detect the polymorphisms between the two parents. 141 SSR primer pairs, 127 genomic-SSR and 14 EST-SSR ones, which can be used to detect polymorphisms between the two parents, were selected to analyze the RILs population. Thus, a linkage genetic map which consists of 131 SSR loci in 20 linkage groups, with a coverage of 679 cM and an average of 6.12 cM of inter-maker distance was constructed. The putative functions of 12 EST-SSR markers located on the map were analyzed. Eleven showed homology to gene sequences deposited in GenBank. This is the first report of construction of a comprehensive genetic map with SSR markers in peanut （Arachis hypogaea L.）. The map presented here will provide a genetic framework for mapping the qualitative and quantitative trait in peanut.

关键词： peanut (Arachis hypogaea L.) SSR genetic linkage map

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

REACTION KINETICS OVER PRECIPITATED Fe/Mn/K CATALYST FOR THE FISCHER-TROPSCH SYNTHESIS

引用

Journal of Energy Chemistry 1995年第3期 311-319页

作者： SHEN wen-jie YAN shi-Run ZHOU Jing-Lai ZHANG Bi-JiangInstitute of Coal Chemistry, Academia Sinica Taiyuan, Shanxi 030001

The kinetics of the Fischer-Tropsch Synthesis reaction is studied in an internally recycled reactor (CSTR) over a commercial, precipitated Fe/Mn/K catalyst. Kinetic data are obtained with 1 47-4.04 H2/CO feed gas over a temperature range of 265-320℃, a pressure range of 1.0-2.6 MPa, and a space velocity range of 300-800 h-1 . The kinetic model which fits the experimental data well is the same as that of the intrinsic kinetics, i.e. -RH2+CO=kPH2PCO/(PCO+bPH2O, where k is the kinetic constant for the rate-determining step and b is a function of temperature only. This model may be derived by assuming that the rate-determining step is the hydrogenation of adsorbed CO according to the enol mechanism. It is found that the CO usage ratio is probably independent of synthesis gas conversion and total pressure, and the catalyst shows high water-gas-shift activity.

关键词： Fischer-Tropsch Synthesis reaction kinetics Fe/Mn/K catalyst

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Structural engineering of high-entropy alloys for advanced electrocatalytic reactions

引用

Tungsten 2025年第1期7卷 1-31页

作者： Qiao Xie Ying-jie Yu Hai-Jun Zhang Ya-Ping Deng wen Lei The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and Technology Department of Chemical Engineering Waterloo Institute for Sustainable Energy Waterloo Institute for Nanotechnology University of Waterloo

High-entropy alloys(HEAs) have emerged as promising candidates to replace traditional precious metal catalysts,owing to their unique chemical and physical *** review commences by revisiting the fundamental concepts of HEAs,including their synthesis methods and structural control strategies in *** underscores the critical role of meticulously manipulating both macroscopic and microscopic structures of the HEAs to optimize their catalytic performance.A deep understanding of the structure-activity relationship in HEAs across various configurations is pivotal in developing more effective *** review methodically encapsulates the research progress of structural control strategies for HEAs in achieving efficient energy conversion,with the aim of gaining a better understanding of the relationship between structure and *** review concludes by summarizing the current achievements and challenges,and suggestions for potential future directions of HEAs in the fields of energy conversion and environmental purification.

关键词： Electrocatalytic Energy conversion High-entropy alloys Structural modulation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Mechanical Properties of Railway High-strength Manufactured Sand Concrete: Typical Lithology, Stone Powder Content and Strength Grade

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 194-203页

作者： WANG Zhen LI Huajian HUANG Fali YANG Zhiqiang wen Jiaxin shi Henan Railway Engineering Research Institute China Academy of Railway Science Corporation LimitedBeijing 100081China State Key Laboratory for Track Technology of High-Speed Railway Beijing 100081China

In order to achieve the large-scale application of manufactured sand in railway high-strength concrete structure,a series of high-strength manufactured sand concrete(HMC)are prepared by taking the manufactured sand lithology(tuff,limestone,basalt,granite),stone powder content(0,5%,10%,15%)and concrete strength grade(C60,C80,C100)as *** evolution of mechanical properties of HMC and the correlation between cubic compressive strength and other mechanical properties are *** to river sand,manufactured sand enhances the cubic compressive strength,axial compressive strength and elastic modulus of concrete,while its potential microcracks weaken the flexural strength and splitting tensile strength of *** powder content displays both positive and negative effects on mechanical properties of HMC,and the stone powder content is suggested to be less than 10%.The empirical formulas between cubic compressive strength and other mechanical properties are proposed.

关键词： manufactured sand concrete railway mechanical property lithology stone powder content

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：