检索结果-南通市图书馆

Corrosion behavior and protection mechanism of carbon steel coated with ethylene chlorotrifluoroethylene(ECTFE)

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第6期25卷 502-515页

作者： Peihu SHEN jun WEN Biqin DONG Hedong LI Minjia wang School of Civil Engineering and Architecture Zhejiang Sci-Tech UniversityHangzhou310018China College of Civil and Transportation Engineering Shenzhen UniversityShenzhen518061China Zhejiang Research Institute of Chemical Industry Co. Ltd.Hangzhou310023China

Ethylene chlorotrifluoroethylene(ECTFE)coating was applied to the surface of carbon steel through electrostatic spraying and low-temperature heat *** morphology and structure of the coating were analyzed using various characterization *** electrochemical data of the coated steel soaked in 3.5%(mass fraction)NaCl solution for 90 d at different periods were also *** findings indicate that the outer surface of the coating remains structurally stable before and after soaking.F can diffuse into the steel substrate,facilitating the bonding between the coating and the steel substrate,but the free F also induces a weakening effect on the crystalline *** to the thickness of the coating edge and the susceptibility to infiltration of the corrosive medium,under-film micro-zone corrosion occurs at a slow *** soaking for 90 d,the impedance modulus measures approximately 10^(4)Ω·cm^(2),and the open circuit potential(OCP)is−0.61 *** self-corrosion current density is 1.13×10^(−6)A/cm^(2),resulting in a calculated coating protection rate of 99.29%.In summary,despite edge corrosion occurring,the ECTFE coating provides excellent corrosion protection.

关键词： Coating Fluorine resin Edge corrosion Corrosive behavior Electrochemical performance

A Hierarchical Modeling Framework for Electrochemical Behaviors in Lithium-Ion Batteries with detailed Structures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第05期7卷 81-89页

作者： Binghe Liu Xin Liu Huacui wang Jie Li jun Xu College of Mechanical and Vehicle Engineering Chongqing University State Key Laboratory of Intelligent Vehicle Safety Technology department of Mechanical Engineering University of Delaware Energy Mechanics and Sustainability Laboratory (EMSLab) University of Delaware

The accurate representation of lithium plating and aging phenomena has posed a persistent challenge within the battery research community. Empirical evidence underscores the pivotal role of cell structure in influencing aging behaviors and lithium plating within lithium-ion batteries (LIBs). Available lithium-ion plating models often falter in detailed description when integrating the structural intricacies. To address this challenge, this study proposes an innovative hierarchical model that intricately incorporates the layered rolling structure in cells. Notably, our model demonstrates a remarkable capacity to predict the non-uniform distribution of current density and overpotential along the rolling direction of LIBs. Subsequently, we delve into an insightful exploration of the structural factors that influence lithium plating behavior,leveraging the foundation laid by our established model. Furthermore, we easily update the hierarchical model by considering aging factors. This aging model effectively anticipates capacity fatigue and lithium plating tendencies across individual layers of LIBs, all while maintaining computational efficiency.

关键词： aging model battery design hierarchical modeling lithium plating lithium-ion battery

Transient state analysis of a rub-impact rotor system during maneuvering flight

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第7期37卷 236-251页

作者： jun wang Yunfei LIU Zhaoye QIN Liang MA Fulei CHU Beijing Key Laboratory of Health Monitoring and Self-Recovery for High-End Machinery Equipment Beijing University of Chemical TechnologyBeijing 100029China State Key Laboratory of Tribology Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China College of Aeronautical Engineering Civil Aviation University of ChinaTianjin 300300China

Maneuvering flight substantially affects the dynamic behavior of rotors;particularly,such flight may cause rubbing between a rotor and stator,which is one of the most serious damages in aircraft *** this paper,a nonlinear dynamic model for describing the dynamic characteristics of a rub-impact rotor system during maneuvering flight is established based on the Lagrange ***,numerical simulations employing the Newmark method are performed,delving into the detailed discussion of the influence of parameters such as rotational speed and maneuvering flight on the transient and steady-state responses of the rotor *** effect mechanism of maneuver load and its coupling with rub impact is *** results show that the impact response induced by maneuvering flight is more obvious in the subcritical state than in the supercritical *** additional stiffness and damping are also induced;in particular,the additional damping has a coupling ***,the rub impact imposes an additional constraint on the rotor system,thereby weakening the influence of the maneuver load and becoming the major factor that determines the dynamic behavior of the rotor system at high speeds.

关键词： Maneuvering flight Rub impact Rotor system Dynamic response Impact response

A robust viscoelastic surfactant tolerating 20% HCl up to 150℃ for oil well stimulation

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1865-1874页

作者： Ji wang Ning Qi Hong-Yao Yin Yu-jun Feng Polymer Research Institute State Key Laboratory of Polymer Materials EngineeringSichuan UniversityChengdu610065SichuanPR.China Tianfu Yongxing Laboratory New Theory and Technology of CO_(2) Capture Research CenterChengdu610065SichuanPR China School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongPR China

Viscoelastic surfactants(VES)are often used as viscous diverters in acidizing stimulation to prolong the acid consumption time and maximize zonal coverage of the acid for improving well ***,the ceiling temperature of commercial VES cannot exceed 120℃in practical use because of the poor thermal stability and fragile molecular structure,hindering their implementation in hightemperature oil reservoirs,i.e.,≥150℃.Here we synthesized a novel C22-tailed diamine,N-erucaminopropyl-N,N-dimethylamine(EDPA),and examined comparatively its rheological behavior,assemblies morphology and molecular stability in 20 wt%HCl with a commercial VES,erucyl dimethyl amidopropyl betaine(EDAB).The feasibility of EDPA for acidizing stimulation was assessed by acid etching of carbonate rock with its HCl solution at 150℃.Rheological results showed that the 2.5 wt%EDPA—20 wt%HCl solution maintains stable viscosity of 90 m Pa s at 150℃for 60 min,while that of 2.0 wt%EDAB HCl solution is just 1 m Pa s under identical conditions.1H NMR spectra and cryo-TEM observations revealed that the chemical structure and self-assembled architectures of EDPA remained intact in such context,but the EDAB suffered from degradation due to the hydrolysis of the amide group,accounting for the poor heat-resistance and *** reaction rate of 2.5 wt%EDPA HCl solution with carbonate rock was one order of magnitude lower than that of 20 wt%HCl solution at 150℃,underpinning the potential of EDPA to be used in the high-temperature reservoirs *** work improved the thermal tolerance of VES in highly concentrated HCl solution,paving a feasible way for the acidization of high-temperature reservoir environments(~150℃).

关键词： Viscoelastic surfactants Thermal stability Self-diverting acid Wormlike micelles Acidizing stimulation

Construct a 3D microsphere of HMX/B/Al/PTFE to obtain the high energy and combustion reactivity

在线全文

学校读者我要写书评

暂无评论

defence Technology（防务技术） 2024年第2期32卷 45-54页

作者： Jian wang Jie Chen Yaofeng Mao Yongjun deng Wei Cao Fude Nie jun wang Institute of Chemical Materials China Academy of Engineering PhysicsMianyang 621999PR China Shock and Vibration of Engineering Materials and Structures Key Lab of Sichuan Province Mianyang 621010PR China

Metal(aluminum and boron)based energetic materials have been wildly applied in various fields including aerospace,explosives and micro-devices due to their high energy ***,the low combustion efficiency and reactivity of metal fuels,especially boron(B),severely limit their practical ***,multi-component 3D microspheres of HMX/B/Al/PTFE(HBA)have been designed and successfully prepared by emulsion and solvent evaporation method to achieve superior energy and combustion *** reactivity and energy output of HBA are systematically measured by ignitionburning test,constant-volume explosion vessel system and bomb *** to the increased interfacial contact and reaction area,HBA shows higher flame propagation rate,faster pressurization rate and larger combustion heat of 29.95 cm/s,1077 kPa/s,and 6164.43 J/g,which is 1.5 times,3.5 times,and 1.03 times of the physical mixed counterpart(HBA-P).Meanwhile,HBA also shows enhanced energy output and reactivity than 3D microspheres of HMX/B/PTFE(HB)resulting from the high reactivity of *** reaction mechanism of 3D microspheres is comprehensively investigated through combustion emission spectral and thermal analysis(TG-DSC-MS).The superior reactivity and energy of HBA originate from the surface etching of fluorine to the inert shell(Al_(2)O_(3) and B_(2)O_(3))and the initiation effect of Al to *** work offers a promising approach to design and prepare high-performance energetic materials for the practical applications.

关键词： HMX/B/Al/PTFE 3D microspheres Surface etching Reaction mechanism

Four-birds-with-one-stone:A multifunctional Ti-based material for solar-driven water evaporation

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4498-4506页

作者： Yannan Li Yaning Sun Dan Zhang Yu Xue Jie wang Nan Zhang jun wang Jiangwei Zhang Yan Zhao jun-Jie Liu School of Physical Science and Technology College of Energy Materials and ChemistryInner Mongolia UniversityHohhot 010021China

Sustainable,environmentally friendly and low-energy desalination materials have important research value for the increasing demand of freshwater year by ***,it is a huge challenge to maintain high heat energy transfer efficiency without reducing the heat conversion capacity of specific solar photothermal conversion ***,their efficiency and durability are greatly limited by the problems of seawater corrosion,oil,and bacteria *** now,no related work has been reported to solve all the aforementioned problems via a simple four-birds-with-one-stone ***,a class of multifunctional porous photothermal silver(Ag)modified Ti foams(Tf-TA/Ag series materials)is prepared for the development of advanced solar water evaporation devices,and provides alternative materials for alleviating freshwater crisis and treating *** oil contact angle(OCA)changes from 41°to 180°,which significantly reduces the adhesion of *** addition,Tf-TA2/Ag sample also shows an excellent and sustained antibacterial effect,which maintains above 99.9%of antibacterial rate after repeated 5 *** surface temperature of the Tf-TA2/Ag sample reaches 52.5℃ after simulated sun irradiation for 20 min,which is significantly higher than that of the contact groups(water:36.4℃,Ti foam:38.2℃ and Tf-TA2:40.9℃).The capacity of seawater evaporation and salt removal is enhanced due to the excellent photothermal properties,low reflectance,and uniform heat dissipation *** water production efficiency of Tf-TA2/Ag sample is 1.41 kg·m^(-2)·h^(-1) in artificial seawater and 0.76 kg·m^(-2)·h^(-1) in oily sewage under simulated sun ***,the hydrophilic and oleophobic properties of Tf-TA2/Ag are critical to extracting water from oil/water mixture in diverse water ***,this four-birds-with-one-stone approach provides a new perspective for the improvement of solar seawater desalination performance.

关键词： four-birds-with-one-stone photothermal material antibacterial material antifouling property

Theoretical study on the effect of H_(2)O on the formation mechanism of NO_(x) precursors during indole pyrolysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第6期18卷 99-112页

作者： Ziqi wang jun Shen Xuesong Liu Sha wang Shengxiang deng Hai Zhang Yun Guo School of Mechanical and Automotive Engineering Shanghai University of Engineering ScienceShanghai 201620China School of Mechanical Engineering Shanghai Jiao Tong UniversityShanghai 200240China

The incineration technology of kitchen waste is one of the effective technologies to achieve the resource utilization of municipal solid *** is an important stage of *** is a rich initial product in the pyrolysis process of kitchen waste,and the presence of H_(2)O has a significant impact on the decomposition of indole to form NO_(x) ***,this study uses density functional theory method to study the effect of H_(2)O on the thermal decomposition of indole to produce NH_(3),HNCO,and *** H_(2)O participates in the reaction,it can provide oxidative groups to generate a new product HNCO,which is different from the previous findings by indole pyrolysis without the presence of H_(2)***,this study theoretically proves that NH_(3) is easier to form than *** is consistent with the phenomenon that NH_(3) release is higher than HCN release in pyrolysis *** addition,compared with the individual pyrolysis of indole,the participation of H_(2)O reduces the energy barriers for the formation of NH_(3) and HCN during indole pyrolysis,thereby promoting the formation of NH_(3) and HCN.

关键词： indole pyrolysis H_(2)O NO_(x)precursors DFT

Investigation of Ce/BEA as a passive NO_(x)adsorber:*** aging deactivation mechanism

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第8期42卷 1524-1530,I0004页

作者： Yiying Ding Minghui Yu Xiaojie Yu Meiqing Shen Jianqiang wang jun wang Gurong Shen School of Chemical Engineering and Technology Tianjin UniversityTianjin300350China School of Materials Science and Engineering Tianjin UniversityTianjin300350China National Rare Earth Catalysis Research Institute Dongying257000China

Ce/BEA has the potential to be applied as a novel passive NO_(x)absorber(PNA)in the after-treatment of vehicles due to its considerable NO_(x)storage ***,as a vehicle exhaust after-treatment material,it must withstand the test of long-term hydrothermal *** work examined the deactivation mechanism of Ce/BEA during hydrothermal aging.3.0 wt%Ce/BEA was prepared using the ionexchange method,and then subjected to hydrothermal treatment at 650℃with 10%H_(2)O for 1-12 h to obtain samples with different aging *** comparison,the H-BEA support was aged under the same ***-Emmett-Teller(BET)method,X-ray diffraction(XRD),NH_(3)temperature programmed reduction(NH_(3)-TPD),^(27)Al MAS nuclear magnetic resonance(^(27)Al MAS NMR),H_(2)temperature programmed reduction(H_(2)-TPR),and high resolution-transmission electron microscopy(HR-TEM)were performed to characterize the changes in PNA performance,structure,Ce species,and *** HR-TEM and H_(2)-TPR results show that CeO_(x)particles appear after hydrothermal aging,which results from the detachment and aggregation of active Ce *** on the^(27)Al MAS NMR results,we conclude that BEA zeolite dealumination leads to the loss of acidic sites and the transformation of active Ce species on the acidic sites into the less active CeO_(x).This is the primary reason for the hydrothermal aging deactivation of Ce/BEA.

关键词： Passive NO_(x)adsorber Ce/BEA Hydrothermal aging CeO_(x) dealumination Rare earths

Interface catalytic reduction of alumina by nickle for the aluminum nanowire growth: Dynamics observed by in situ TEM

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 1225-1231页

作者： Zichun wang Dan wang Ang Li Lizhuo wang Xiaodong Han Yijiao Jiang Jianfeng Chen jun Huang Beijing Advanced Innovation Center for Soft Matter Science and Engineering State Key Laboratory of Organic–Inorganic CompositesBeijing University of Chemical TechnologyBeijing 100029China Laboratory for Catalysis Engineering School of Chemical and Biomolecular EngineeringThe University of SydneyNew South Wales 2006Australia Beijing Key Laboratory of Microstructure and Property of Advanced Materials Beijing University of TechnologyBeijing 100024China department of Engineering Macquarie UniversitySydneyNew South Wales 2109Australia

Metal nanowires show promise in a broad range of applications and can be fabricated via a number of methods,such as vapor–liquid–solid process and template-based ***,the synthesis of Al nanowires(NWs)is still challenging from the stable alumina *** this work,the Ni-catalyzed fabrication of Al NWs has been realized using various Al_(2)O_(3) *** growth dynamics of Al NWs on Ni/Al_(2)O_(3) was studied using in situ transmission electron microscopy(TEM).The effect of alumina structures,compositions,and growth temperature were *** growth of Al NWs correlates with the Na addition to the alumina *** no eutectic mixture of nickel aluminide was formed,a mechanism of Ni-catalyzed reduction of Al_(2)O_(3) for Al NWs growth has been proposed instead of the vapor–liquid–solid *** key insights reported here are not restricted to Ni-catalyzed Al NWs growth but can be extended to understanding the dynamic change and catalytic performance of Ni/Al_(2)O_(3) under working conditions.

关键词： in situ transmission electron microscopy(TEM) Al nanowires alumina reduction nanowire growth