检索结果-南通市图书馆

Effect of diagenetic variation on the static and dynamic mechanical behavior of coral reef limestone

在线全文

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第7期34卷 893-908页

作者： Linjian Ma Jiajun Deng Mingyang wang Jianping wang Bin fang Jiawen Wu State Key Laboratory of Explosion&Impact and Disaster Prevention&Mitigation Army Engineering University of PLANanjing 210007China Naval Research Institute Beijing 100070China

Coral reef limestone at different depositional depths and facies differ remarkably on the textural and mineralogical characteristics,owing to the complex sedimentary *** explore the effects of pore structure and mineral composition associated with diagenetic variation on the mechanical behavior of reef limestone,a series of quasi-static and dynamic compression tests along with microscopic examinations were performed on the reef limestone at shallow and deep burial *** is revealed that the shallow reef limestone(SRL)is classified as a porous aragonite-type carbonate rock with high porosity(55.3±3.2)%and pore *** comparison,the deep reef limestone(DRL)is mainly composed of dense calcite-type calcium carbonate with low porosity(4.9±1.6)%and pore *** DRL strengthened and stiffened by the tight grain framework consistently displays much higher values of the dynamic compressive strength,elastic modulus,brittleness index,and specific energy absorption than those of the *** gap between two types of limestone further increases with an increase in strain *** appears that the failure pattern of SRL is dominated by the inherent defects like weak bonding interfaces and growth lines,revealed by the intricate fracturing network and mixed ***,although the preexisting megapores in DRL may affect the crack propagation on pore tips to a certain distance,it hardly alters the axial splitting failure of DRL under *** stress wave propagation and attenuation in SRL is primarily controlled by the reflection and diffusion caused by plenty mesopores,as well as an energy dissipation in layer-wise pore collapse and adjacent grain crushing,while the stress wave in DRL is highly hinged on the insulation and diffraction induced by the isolated *** process is accompanied by the energy dissipation behavior of inelastic deformation resulted from the pore-emanated microcracking.

关键词： Reef limestone Dynamic behavior Mineral composition Pore structure Wave propagation Energy dissipation

Long-wave infrared emission properties of strain-balanced InAs/In_(x)Ga_(1-x)As_(y)Sb_(1-y)type-Ⅱsuperlattice on different substrates

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3194-3204页

作者： Chao Shi Xuan fang Hong-Bin Zhao Deng-Kui wang Xi Chen Dan fang Dong-Bo wang Xiao-Hua wang Jin-Hua Li State Key Laboratory of High Power Semiconductor Lasers School of PhysicsChangchun University of Science and TechnologyChangchun 130022China State Key Laboratory of Advanced Materials for Smart Sensing China General Research Institute for Nonferrous MetalsBeijing 100088China Department of Opto-Electronic Information Science School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin 150001China

High-performance type-Ⅱsuperlattices ofⅢ-Ⅴsemiconductor materials play an important role in the development and application of infrared optoelectronic *** the quality of epitaxial materials and clarifying the luminescent mechanism are of great significance for practic al applic *** this work,strain-balanced and high-quality In As/In_(x)Ga_(1-x)As_(y)Sb_(1-y)superlattices without lattice mismatch were achieved on InAs and GaSb substrates *** grown on In As substrate could exhibit higher crystal quality and surface flatness based on high-resolution X-ray diffraction(HRXRD)and atomic force microscopy(AFM)measurements'***,the strain distribution phenomenon from geometric phase analysis indicates that fluctuations of alloy compositions in superlattices on GaSb substrate are more *** addition,the optical properties of superlattices grown on different substrates are discussed *** of the difference in fluctuations of element composition and interface roughness of superlattices on different substrates,the superlattices grown on In As substrate would have higher integral intensity and narrower full-width at half maximum of long-wave infrared ***,the thermal quenching of emission intensity indicates that the superlattices grown on the In As substrate have better recombination ability,which is beneficial for increasing the operating temperature of infrared optoelectronic devices based on this type of superlattices.

关键词： Photoluminescence Alloy compositions fluctuations InAs(Sb)/In_(x)Ga_(1-x)As_(y)Sb_(1-y) Type-Ⅱsuperlattice Substrate

Exploration of heavy Higgs bosons at a 100 TeV hadron collider within the semi-constrained next-to-minimal supersymmetric standard model

在线全文

学校读者我要写书评

暂无评论

Chinese Physics C 2024年第9期48卷 107-117页

作者： kun wang Pengfu Tian Jingya Zhu College of Science University of Shanghai for Science and TechnologyShanghai 200093China School of Physics and Technology Wuhan UniversityWuhan 430072China School of Physics and Electronics Henan UniversityKaifeng 475004China

In this study,we explore the detectability of heavy Higgs bosons in the pp→bbH/A→bbtt channel at a100 TeV hadron collider within the semi-constrained next-to-minimal supersymmetric standard *** calculate their production cross sections and decay branching ratios and compare them with simulation results from *** focus on the heavy doublet-dominated CP-even Higgs H and CP-odd Higgs A,with mass limits set below 10TeV to ensure *** a collider with an integrated luminosity of 3 ab^(-1),the potential for detecting heavy Higgs bosons varies significantly with their mass and tanβ.Heavy Higgs bosons with masses below 2 TeV are within the testable range,while those heavier than 7 TeV are below the exclusion and discovery thresholds,rendering them *** masses between 2 and 7 TeV,heavy Higgs bosons with tanβ smaller than 20 can be detected,whereas those with tanβ larger than 20 are beyond the current discovery or exclusion capabilities.

关键词： next-to-minimal supersymmetric standard model heavy Higgs boson 100 TeV hadron collider

Grain size effect on the assembly quality of micro-scaled barrel formed by microforming

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第1期12卷 19-32页

作者： Dien Hu Jieyichen fang Feng Zeng Ming-wang Fu Department of Mechanical Engineering Research Institute of Advanced ManufacturingThe Hong Kong Polytechnic UniversityHung HomKowloonHong KongPeople’s Republic of China Xiamen Yulong Machinery Co.Ltd. Xiamen361023FujianPeople’s Republic of China

In this research,a method employing micro-extrusion was designed to produce the micro-scaled barrel-shaped parts with complex geometrical features to study the feasibility of the proposed microforming method and its grain size effect on the formability of the complicated internal features in terms of deformation behavior,material evolution,accuracy of dimensions and final components *** results reveal that the deformation behavior is highly affected by grain size and becomes unpredictable with increased grain *** addition,assembly parameters including feature dimension,tolerance and coaxiality also vary with grain size,and the variation of grain size needs to be accommodated by different assembly types,viz.,clearance fit or transition *** the microstructural evolution aspect,it was identified there were two dead zones and four shear bands,and the formation of these deformation zones was barely affected by the variation in grain *** bulges,cracks,and fracture induced voids were observed on the surface of the final components,tailoring the microstructure of the working material with finer grains could significantly avoid these *** study advances the understanding of forming microparts by extrusion processes and provides guidance for microforming of similar microparts.

关键词： Microformed part Size effect Extrusion Microstructural evolution Dimensions Assembly accuracy

Application of magnetotactic bacteria as engineering microrobots:Higher delivery efficiency of antitumor medicine

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第10期35卷 139-146页

作者： Jing Zhang Charles wang Yaoyao Zhang Haining Xia Yujuan wang kun Ma junfeng wang High Magnetic Field Laboratory CAS Key Laboratory of High Magnetic Field and lon Beam Physical BiologyHefei Institutes of Physical ScienceChinese Academy of SciencesHefei 230031China University of Science and Technology of China Hefei 230026China University of California San DiegoLa JollaCA 92093United States International Magnetobiology Frontier Research Center Hefei 230031China

For a significant duration,enhancing the efficacy of cancer therapy has remained a critical *** bacteria(MTB),often likened to micro-robots,hold substantial promise as a drug delivery ***,classified as anaerobic,aquatic,and gram-negative microorganisms,exhibit remarkable motility and precise control over their internal biomineralization *** unique ability results in the formation of magnetic nanoparticles arranged along filamentous structures in a catenary fashion,enclosed within a *** bacteria possess distinctive biochemical properties that facilitate their precise positioning within complex *** harnessing these biochemical attributes,MTB could potentially offer substantial advantages in the realm of cancer *** article reviews the drug delivery capabilities of MTB in tumor treatment and explores various applications based on their inherent *** objective is to provide a comprehensive understanding of MTB-driven drug delivery and stimulate innovative insights in this field.

关键词： Magnetotactic bacteria Engineering microrobot Tumor treatment Drug delivery Bioconjugation

A multichannel thermal bubble-actuated impedance flow cytometer with on-chip TIA based on CMOS-MEMS

在线全文

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第5期45卷 41-49页

作者： Shengxun Cai Jianqing Nie kun wang Yimin Guan Demeng Liu School of Microelectronics Shanghai UniversityShanghai 201800China Shanghai AURE Technology Limited Company Shanghai 201800China

Electrochemical impedance spectroscopy(EIS)flow cytometry offers the advantages of speed,affordability,and portability in cell analysis and cytometry ***,the integration challenges of microfluidic and EIS read-out circuits hinder the downsizing of cytometry *** address this,we developed a thermal-bubble-driven impedance flow cytometric application-specific integrated circuit(ASIC).The thermal-bubble micropump avoids external piping and equipment,enabling high-throughput *** a total of 36 cell counting channels,each measuring 884×220μm^(2),the chip significantly enhances the throughput of flow *** cell counting channel incorporates a differential trans-impedance amplifier(TIA)to amplify weak biosensing *** eliminating the parasitic parameters created at the complementary metal-oxidesemiconductor transistor(CMOS)-micro-electromechanical systems(MEMS)interface,the counting accuracy can be *** on-chip TIA can adjust feedback resistance from 5 to 60 kΩto accommodate solutions with different *** chip effectively classifies particles of varying sizes,demonstrated by the average peak voltages of 0.0529 and 0.4510 mV for 7 and 14μm polystyrene beads,***,the counting accuracies of the chip for polystyrene beads and MSTO-211H cells are both greater than 97.6%.The chip exhibits potential for impedance flow cytometer at low cost,high-throughput,and miniaturization for the application of point-of-care diagnostics.

关键词： EIS flow cytometry CMOS-MEMS thermal bubble lab-on-chip

Review on frost resistance and anti-clogging of pervious concrete

在线全文

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation Engineering(English Edition) 2024年第3期11卷 481-496页

作者： Zhuo wang Zhichen Liu Feng Zeng kun He Shuaicheng Guo China Railway Construction Group Co. Ltd.Beijing 100040China State Key Laboratory of Bridge Safety and Resilience College of Civil EngineeringHunan UniversityChangsha 410082China

Pervious concrete is a special type of concrete that is of high porosity and contains no or a small amount of fine aggregate,and it is an important basic material for sponge city *** presence of a large number of connected pores inside pervious concrete leads to a marked difference in durability failure mechanism compared with that of ordinary *** this study,the frost resistance and anti-clogging of pervious concrete were introduced in detail,and the methods to improve their performance were summarized *** cracking pattern of pervious concrete is influenced by geometric characteristics and three-dimensional morphological features of pores,resulting in its crack generation,development,and geometry being significantly different from those of ordinary concrete,thus leading to different freeze-thaw cycle *** addition,due to its different pore structure compared to ordinary concrete,three types of clogging mechanisms,affecting the long-term permeability of pervious concrete were elaborated systematically(i.e.,physical clogging,biological clogging,and chemical clogging).And the ways to improve the anti-clogging of pervious concrete are systematically presented from multiple ***,in order to broaden the engineering applications of pervious concrete,some research proposals are presented in this study.

关键词： Pervious concrete Connected pore Frost resistance Clogging mechanism

Improving the accuracy of precipitation estimates in a typical inland arid area of China using a dynamic Bayesian model averaging approach

在线全文

学校读者我要写书评

暂无评论

Journal of Arid Land 2024年第3期16卷 331-354页

作者： XU Wenjie DING Jianli BAO Qingling wang Jinjie XU kun College of Geography and Remote Sensing Sciences Xinjiang UniversityUrumqi 830017China Key Laboratory of Smart City and Environment Modelling of Higher Education Institute Xinjiang UniversityUrumqi 830017China

Xinjiang Uygur Autonomous Region is a typical inland arid area in China with a sparse and uneven distribution of meteorological stations,limited access to precipitation data,and significant water *** and integrating precipitation datasets from different sources to accurately characterize precipitation patterns has become a challenge to provide more accurate and alternative precipitation information for the region,which can even improve the performance of hydrological *** study evaluated the applicability of widely used five satellite-based precipitation products(Climate Hazards Group InfraRed Precipitation with Station(CHIRPS),China Meteorological Forcing Dataset(CMFD),Climate Prediction Center morphing method(CMORPH),Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Climate Data Record(PERSIANN-CDR),and Tropical Rainfall Measuring Mission Multi-satellite Precipitation Analysis(TMPA))and a reanalysis precipitation dataset(ECMWF Reanalysis v5-Land Dataset(ERA5-Land))in Xinjiang using ground-based observational precipitation data from a limited number of meteorological *** on this assessment,we proposed a framework that integrated different precipitation datasets with varying spatial resolutions using a dynamic Bayesian model averaging(DBMA)approach,the expectation-maximization method,and the ordinary Kriging interpolation *** daily precipitation data merged using the DBMA approach exhibited distinct spatiotemporal variability,with an outstanding performance,as indicated by low root mean square error(RMSE=1.40 mm/d)and high Person's correlation coefficient(CC=0.67).Compared with the traditional simple model averaging(SMA)and individual product data,although the DBMA-fused precipitation data were slightly lower than the best precipitation product(CMFD),the overall performance of DBMA was more *** error analysis between DBMA-fused precipitation dataset and the more advanced Inte

关键词： precipitation estimates satellite-based and reanalysis precipitation dynamic Bayesian model averaging streamflow simulation Ebinur Lake Basin Xinjiang

A modified 3D mean strain energy density criterion for predicting shale mixed-mode Ⅰ/Ⅲ fracture toughness

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第7期16卷 2411-2428页

作者： kun Zheng Chaolin wang Yu Zhao Jing Bi Haifeng Liu College of Civil Engineering Guizhou UniversityGuiyang550025China State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China

The fracture toughness of rocks is a critical fracturing parameter in geo-energy exploitation playing a significant role in fracture mechanics and hydraulic *** edge-notched disk bending(ENDB)specimens are employed to measure the entire range of mixed-modeⅠ/Ⅲfracture toughness of Longmaxi *** theoretically interpret the fracture mechanisms,this research first introduces the detailed derivations of three established fracture *** distinguishing the volumetric and distortional strain energy densities,an improved three-dimensional mean strain energy density(MSED)criterion is *** the critical volumetric to distortional MSED ratio decreases,the transition from tensiondominated fracture to shear-dominated fracture is *** results indicate that both peak load and applied energy increase significantly with the transition from pure mode I(i.e.,tension)to pure modeⅢ(i.e.,torsion or tearing)since mode-Ⅲcracking happens in a twisted manner and mode-Ⅰcracking occurs in a coplanar *** macroscopic fracture signatures are consistent with those of triaxial hydraulic *** average ratio of pure mode-Ⅲfracture toughness to pure mode-Ⅰfracture toughness is 0.68,indicating that the obtained mode-Ⅲfracture resistance for a tensionbased loading system is apparent rather than *** to the three mainstream fracture criteria,the present fracture criterion exhibits greater competitiveness and can successfully evaluate and predict mixed-modeⅠ/Ⅲfracture toughness of distinct materials and loading methods.

关键词： Longmaxi shale Hydraulic fracturing Fracture mechanisms Fracture criteria Mixed-modeⅠ/Ⅲfracture toughness Edge-notched disk bending