检索结果-南通市图书馆

Counter-Rotating Type Pump-Turbine Unit Cooperating with Wind Power Unit

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2013年第1期22卷 7-12页

作者： Tengen Murakami toshiaki kanemoto Faculty of Engineering Kyushu Institute of Technology

This serial research proposes the hybrid power system combined the wind power unit with the counter-rotating type pump-turbine unit,to provide the constant output for the grid system,even at the suddenly fluctuating/turbulent *** this paper,the tandem impellers of the counter-rotating type pumping unit was operated at the turbine mode,and the performances and the flow conditions were investigated numerically and *** 3-D turbulent flows in the runners were simulated at the steady state condition by using the commercial CFD code of ANSYS-CFX ver.12 with the SST turbulence *** providing the pump unit for the turbine mode,the maximum hydraulic efficiency is close to one of the counter-rotating type hydroelectric unit designed exclu-sively for the turbine ***,the runner/impeller of the unit works evidently so as to coincide the angularmomentum change through the front runners/impellers with that through the rear runners/impellers,namely to take the axial flow at not only the inlet but also the outlet without the guide *** results show that this type of unit is effective to work at not only the pumping but also the turbine modes.

关键词： pump-turbine pumping mode turbine mode power supply counter-rotation

Counter-Rotating Type Tidal Stream Power Unit Boarded on Pillar(Performances and Flow Conditions of Tandem Propellers)

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2013年第6期22卷 580-585页

作者： Yuta Usui toshiaki kanemoto Koju Hiraki Kyushu Institute of Technology: Sensui 1-1 TobataKitakyushuFukuoka804-8550Japan

The authors have invented the unique counter-rotating type tidal stream power unit composed of the tandem pro- peUers and the double rotational armature type peculiar generator without the traditional stator. The front and the rear propellers counter-drive the inner and the outer armatures of the peculiar generator, respectively. The unit has the fixftful advantages that not only the output is sufficiently higher without supplementary equipment such as a gearbox, but also the rotational moment hardly act on the pillar because the rotational torque of both propel- lers/armatures are counter-balanced in the unit. This paper discusses experimentally the performances of the power unit and the effects of the propeller rotation on the sea surface. The axial force acting on the pillar in- creases naturally with the increase of not only the stream velocity but also the drag of the tandem propellers. Be- sides, the force vertical to the stream also acts on the pillar, which is induced from the Karman vortex street and the dominant frequencies appear owing to the front and the rear propeller rotations. The propeller rotating in close to the sea surface brings the abnormal wave and the amplitude increases as the stream velocity is faster and/or the drag is stronger.

关键词： Tidal stream Counter rotation Tandem propellers Generator Armature

Performances and Acoustic Noise of Micro Multi-blade Fan

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2008年第4期17卷 343-348页

作者： Ryotaro Hidaka toshiaki kanemoto Tetsuya Sunada Kyushu Institute of Technology

In this paper, the performances and the acoustic noise of the traditional type micro multi-blade fan were investi- gated experimentally and numerically, to optimize the specifications of the fan for the resident circumstances. The acoustic noise level decreases but the efficiency deteriorates slightly with the increase of the blade number of the impeller. Besides, the acoustic noise decreases with the increase of the distance between the impeller outlet and the volute tongue, in accompanying with the increase of the input and the deterioration of the fan efficiency.

关键词： Multi-blade fan Sirocco fan Performance Internal flow Flow simulation CFD Acoustic noise Efficiency Turbulent fluctuation Volute

Approaches to Stable Operation of Shaftless Centrifugal Pump

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2009年第1期18卷 48-53页

作者： Ryunosuke Kawashima Mitsuo Uno toshiaki kanemoto Department of mechanical engineering Kyushu Kyoritsu University 1-8 Jiyugaoka Faculty engineering Kyushu Institute of Technology

The shaft-less impeller of the centrifugal pump, which is driven by the magnetic induction, was developed. Theimpeller rotates under the floating condition without any control device. The floating condition of the impeller isrealized by utilizing the pressure in pump casing. The pump performance and the rotational behavior of the impellerwere investigated experimentally. It has found that the floating position of the impeller become quite unstablein a partial flow rate operation. And the pressure distribution at the casing wall affects the rotational posture ofthe impeller. This paper presents the effect of the casing treatment on the rotational posture of the impeller and thepressure distribution. The reasonable casing treatment is available for the stable rotational posture of the impeller.

关键词： Centrifugal pump Impeller Magnetic induction Casing treatment Passive control

Floating Type Ocean Wave Power Station Equipped with Hydroelectric Unit

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2013年第5期22卷 467-471页

作者： Shun Okamoto toshiaki kanemoto Toshihiko Umekage Kyushu Institute of Technology Sensui 1-1 Tobata Kitakyushu 804-8550 Japan

The authors have invented the unique ocean wave power station,which is composed of the floating type platform with a pair of the floats lining up at the interval of one wave pitch and the counter-rotating type wave power unit,its runners are submerged in the seawater at the middle position of the *** profiles make the flow velocity at the runner is twice faster than that of the traditional fixed/caisson type OWC,on the ideal flow ***,the runners counter-rotate the inner and the outer armatures of the peculiar generator,respectively,and the relative rotational speed is also twice faster than the speed of the single runner/*** characteristics make the runner diameter large,namely the output higher,as requested,because the torque of the power unit never act on the floating type *** the preliminary reseach,this paper verifies to get the power using a Wells type single runner installed in the model *** runner takes the output which is affected by the oscillating amplitude of the platform,the rotational speed and the inertia force of the runner,etc.

关键词： Renewable energy Ocean wave Float Platform Counter-rotation Power unit

Acoustic Noise from Tandem Wind Rotors of Intelligent Wind Power Unit

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2010年第2期19卷 120-125页

作者： Koichi Kubo Nobuhiko Mihara Akira Enishi toshiaki kanemoto Kyushu Institute of Technology:Sensui 1-1

The authors had invented the unique wind power unit composed of the large-sized front wind rotor,the small-sized rear wind rotor and the peculiar generator with the inner and the outer rotational armatures without the conventional *** unit is called "Intelligent Wind Power Unit" by the *** front and the rear wind rotors drive the inner and the outer armatures,respectively,while the rotational torque is counter-balanced between both armatures/wind *** paper discusses experimentally the acoustic noise from the front and the rear wind *** acoustic noise,in the counter-rotating operation,is induced mainly from the flow interaction between both rotors,and has the dominant power spectrum density at the frequency of the blade passing *** noise is caused mainly from the turbulent fluctuation due to the flow separation on the blade,when the rear wind rotor stops or rotates in the same direction as the front wind rotor.

关键词： Acoustic noise Wind turbine Tandem wind rotors Counter-rotation

Unsteady Operation of New Type Turbofan Engine with Aerodynamic Torque Converter Reducing Front Fan Speed

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2005年第3期14卷 206-210页

作者： toshiaki kanemoto Seita SEKI Kazunori IDENO Ahmed Mohamed GALAL Kyushu Institute of Technology Sensui 1-1 Tobata Kitakyushu 804-8550 Japan ProfessorKyushu Institute of Technology Sensui 1-1 Tobata Kitakyushu 804-8550 JapanKyushu Institute of Technology Sensui 1-1 Tobata Kitakyushu 804-8550 JapanKyushu Institute of Technology Sensui 1-1 Tobata Kitakyushu 804-8550 Japan

It is desired to increase the rotational speed of the core engine of the turbofan so as to get the best efficiency for the next leap of engine technology. The conventional mechanism in which the front fan is directly connected to the output shaft of a core engine, have a limit of increasing the spool speed, because the fan diameter is very large. The authors have proposed a new driving system in which the front fan is driven through the aerodynamic torque converter. The front fan can work at the best performance at slower speed while the core engine runs more efficiently at higher speed. Continuously, this paper discusses the response of the front fan in the unsteady operation of the core engine, accompanying with the internal flow. The system has the acceptable responsibility in the unsteady operation which is very important for the aircrafts.

关键词： turbofan engine front fan torque converter rotational speed

Turbo-pump with Isolated Two Stage Impellers for Future Rocket Engine (Trial to Drive Impellers Independently)

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2008年第1期17卷 28-34页

作者： toshiaki kanemoto Makoto Shimojyo Ryunosuke Kawashima Daisuke Tanaka Akira Inagaki Shin Oba Kyushu Institute of Technology:Sensui 1-1 TobataKitakyushu 804-8550Japan Professor Kyushu Institute of Technology:Sensui 1-1 TobataKitakyushu 804-8550Japan DMW Corporation:Miyoshi 3-27 Mishima 411-8560Japan

To suppress the cavitation in the impellers and to make the turbo-pump lives longer, the inducer was separated from the main impeller and both impellers were driven independently. The performance of the pump and the flow conditions around the impellers were investigated experimentally and the following results were obtained. （1）The main impeller contributes to the flow interaction between the inducer and the main impeller. （2）The rotational speeds of both impellers can be controlled independently in order to suppress simultaneously the cavitation not only in the main impeller, but also in the inducer.

关键词： Turbo-pump Inducer Impeller Rocket Engine Cavitation NPSH

Performance Study of a Hybrid Heat Pump Dryer based on Numerical Analysis and Experimental Set-up

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2021年第1期30卷 111-122页

作者： SHAMSUDDEEN Mohamed Murshid CHA Dong-An KIM Seon-Chang kanemoto toshiaki KIM Jin-Hyuk Industrial Technology Korea University of Science&TechnologyDaejeon 34113Republic of Korea Thermal&Fluid System R&D Group Korea Institute of Industrial TechnologyCheonan 31056Republic of Korea Institute of Ocean Energy Saga UniversityHonjo 1Saga 840-8502Japan

Seafood,especially sea cucumbers and oysters are an expensive delicacy in several Asian *** sun-drying of these products takes 3 to 4 days and fetches a lower market *** industrial drying machines used for seafood drying are unable to dry sea cucumbers and oysters without texture and color degradation as they are delicate,temperature-sensitive and have longer drying *** economical drying system that does not cause texture or color degradation is the heat pump drying system and is commonly applied for agriculture and fabric *** this study,the heat pump technology is applied to develop two hybrid dryer models(bottom discharge and front discharge)to dry shellfish and sea cucumbers in large scale for storage and *** model is tested in a laboratory-scale with wet sponges as input material for its dehumidification capacity and the power consumed to attain the target *** front discharge model is found to have rapid drying capability and *** fluid dynamic tools are used to study the hot air flow behavior and flow uniformity inside the drying *** front discharge model showed smooth uniform flow over the trays with fewer losses in the flow *** front discharge model with higher drying rate,lower power consumption and uniform airflow distribution over the trays is chosen for the industrial-scale design.

关键词： heat pump hybrid dryer CFD drying rate sea cucumber oyster