检索结果-南通市图书馆

China Foundry 2024年第2期21卷 168-174页

作者： Zhi-yong zhang jiao-jiao Cheng Jia-qi Xie Shi-bing Liu Kun Shi Jun Zhao Shenyang Research Institute of Foundry Co. Ltd.CAMShenyang 110022China National Key Laboratory of Advanced Casting Technologies Shenyang 110022China

Titanium matrix composites reinforced with ceramic particles are considered a promising engineering material due to their combination of high specific strength,low density,and high *** this study,the TA15-based composites reinforced with a volume fraction of 10% to 25%(TiB+TiC)were prepared using powder metallurgy and casting *** characterization and phase constitution were examined using optical microscopy(OM),scanning electron microscopy(SEM),and X-ray diffraction(XRD).In addition,the microhardness,room temperature(RT)and high temperature(HT)tensile properties of the composites were *** revealed that the reinforcements are distributed uniformly even in the composites with a high volume of TiB and ***,as the volume fraction exceeds 15%,TiB and TiC particles become coarsening and exhibit rod-like and dendritic-like *** increases gradually from 321.2 HV for the base alloy to a maximum of 473.3 HV as the reinforcement increases to 25vol.%.Tensile test results indicate that a reinforcement volume fraction above 20% is beneficial for enhancing tensile strength and yield strength at high temperatures,but it has an adverse effect on room temperature ***,if the reinforcement volume fraction is below 20%,it can improve high-temperature elongation when the temperature exceeds 600℃.

关键词： titanium matrix composites microstucture microhardness tensile properties in-situ synthesis

Optimal retrofitting scenarios of multi-objective energy-efficient historic building under different national goals integrating energy simulation,reduced order modelling and NSGA-II algorithm

在线全文

学校读者我要写书评

暂无评论

Building Simulation 2024年第6期17卷 933-954页

作者： Hailu Wei Yuanhao jiao Zhe Wang Wei Wang Tong zhang School of Architecture Southeast UniversityNanjingJiangsu Province210096China Key Laboratory of Urban and Architectural Heritage Conservation(Southeast University) Ministry of EducationNanjingChina Department of Civil and Environmental Engineering The Hong Kong University of Science and TechnologyHong KongChina HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute FutianShenzhenChina

Retrofitting a historic building under different national goals involves multiple objectives,constraints,and numerous potential measures and packages,therefore it is time-consuming and challenging during the early design *** study introduces a systematic retrofitting approach that incorporates standard measures for the building envelope(walls,windows,roof),as well as the heating,cooling,and lighting *** retrofit objectives are delineated based on prevailing Chinese *** retrofit measures function as genes to optimize energy-savings,carbon emissions,and net present value(NPV)by employing a log-additive decomposition approach through energy simulation techniques and NSGA-II,yielding 185,163,and 8 ***,a weighted sum method is proposed to derive optimal solutions across multiple *** framework is applied to a courtyard building in Nanjing,China,and the outcomes of the implementation are scrutinized to ascertain the optimal retrofit package under various *** this retrofit,energy consumption can be diminished by up to 63.62%,resulting in an NPV growth of 151.84%,and maximum rate of 60.48%carbon *** three result values not only indicate that the optimal values are achieved in these three aspects of energy saving,carbon reduction and economy,but also show the possibility of possible equilibrium in this multi-objective optimization *** framework proposed in this study effectively addresses the multi-objective optimization challenge in building renovation by employing a reliable optimization algorithm with a computationally efficient reduced-order *** provides valuable insights and recommendations for optimizing energy retrofit strategies and meeting various performance objectives.

关键词： historic building energy-efficient retrofitting building energy simulation log-additive decomposition approach NSGA-II

Comparative analysis of frictional behavior and mechanism of molybdenum ditelluride with different structures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 110-119页

作者： Lina zhang Xinfeng TAN Jianguo jiao Dan GUO Jianbin LUO State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China

Two-dimensional(2D)transition metal dichalcogenides(TMDCs)have layered structures with excellent tribological *** the energy difference between hexagonal-molybdenum ditelluride(2H-MoTe_(2))and distorted octahedral-molybdenum ditelluride(1T′-MoTe_(2))is very small among the transition metal dichalcogenides(TMDCs),MoTe_(2) becomes one of the most promising candidates for phase *** our experiment,we found that the friction force and friction coefficient(COF)of 2H-MoTe_(2) were an order of magnitude smaller than those of 1T′-MoTe_(2) by the atomic force microscope(AFM)*** friction difference between 1T′-MoTe_(2) and 2H-MoTe_(2) was further verified in molecular dynamics(MD)*** density functional theory(DFT)calculations suggest that the friction contrast is related to the difference in sliding energy barrier of the potential energy surface(PES)for a tip sliding across the *** PES obtained from the DFT calculation indicates that the maximum energy barrier and the minimum energy path(MEP)energy barrier of 2H-MoTe_(2) are both smaller than those of 1T′-MoTe_(2),which means that less energy needs to be dissipated during the sliding *** difference in energy barrier of the PES could be ascribed to its larger interlayer spacing and weaker Mo–Te interatomic interactions within the layers of 2H-MoTe_(2) than those of 1T′-MoTe_(2).The obvious friction difference between 1T′-MoTe_(2) and 2H-MoTe_(2) not only provides a new non-destructive means to detect the phase transition by the AFM,but also provides a possibility to tune friction by controlling the phase transition,which has the potential to be applied in extreme environments such as space lubrication.

关键词： friction two-dimensional(2D)materials distorted octahedral-molybdenum ditelluride(1T′-MoTe_(2)) hexagonal-molybdenum ditelluride(2H-MoTe_(2)) phase transition

Regulation of Ti(C,N)deposition on hot surface of refractory in blast furnace hearth

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1423-1435页

作者： Jian Cao Cui Wang Jjan-liang zhang Ke-xin jiao Guo-hua zhang State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China

Ti(C,N)concentration was found to be lower on the hearth sidewall of a blast furnace and increased gradually toward the bottom of the blast *** Ti(C,N)protective layer in a blast furnace is ***,the formation of a Ti(C,N)protective layer was promoted by studying the heterogeneous nucleation principle of titanium compounds on different substances and regulation measures for the deposition process of titanium compounds on refractories or *** lattice disregistry between the titanium compounds and the main components in the refractory or the main impurities in the protective layer was calculated using a two-dimensional disregistry equation to study the heterogeneous nucleation principle of titanium *** results revealed that in refractory materials,the heterogeneous nucleation of carbonitride is weak when C,SiO_(2),and Al_(2)O_(3) are used as heterogeneous nucleation substrates,and the heterogeneous nucleation of carbonitride is strong when TiO_(2) and SiC are used as heterogeneous nucleation *** nucleation phases,TiC,TiN,Ti(C_(0.3),N_(0.7)),and Ti(C_(0.5),N_(0.5))have similar heterogeneous nucleation ability in single component refractory,and the type of carbonitride has little effect on the lattice *** impurities in the protective layer as the substrate phases are not conducive to the heterogeneous nucleation of *** CaS was used as the substrate phase,the heterogeneous nucleation ability of carbonitride was the *** carbon and alumina were not conducive to the heterogeneous nucleation of carbonitride,but carbon was more unfavourable than alumina.

关键词： Ti(C,N) Lattice disregistry Lattice constant Heterogeneous nucleation Regulation measure

Porous nanofibrous dressing enables mesenchymal stem cell spheroid formation and delivery to promote diabetic wound healing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 156-164页

作者： Kexin zhang Wenmin zhang Heng An Zhe Huang Yanzhen Wen Xiangyu jiao Yongqiang Wen College of Chemical Engineering and Technology Taiyuan University of Science and TechnologyTaiyuan 030024China Beijing Key Laboratory for Bioengineering and Sensing Technology Daxing Research InstituteSchool of Chemistry&Biological EngineeringUniversity of Science&Technology BeijingBeijing 100083China

Delayed and nonhealing of diabetic wounds imposes substantial economic burdens and physical pain on *** stem cells(MSCs)promote diabetic wound *** when MSCs aggregate into multicellular spheroids,their therapeutic effect is ***,traditional culture platforms are inadequate for the efficient preparation and delivery of MSC spheroids,resulting in inefficiencies and inconveniences in MSC spheroid *** this study,a three-dimensional porous nanofibrous dressing(NFD)is prepared using a combination of electrospinning and homogeneous *** thermal crosslinking,the NFD not only achieves satisfactory elasticity but also maintains notable *** the design of its structure and chemical composition,the NFD allows MSCs to spontaneously form MSC spheroids with controllable sizes,serving as MSC spheroid delivery systems for diabetic wound *** importantly,MSC spheroids cultured on the NFD exhibit improved secretion of vascular endothelial growth factor,basic fibroblast growth factor,and hepatocyte growth factor,thereby accelerating diabetic wound *** NFD provides a competitive strategy for MSC spheroid formation and delivery to promote diabetic wound healing.

关键词： Electrospinning Homogenization Biomedical engineering Nanomaterials Stem cell spheroids Diabetic wound healing

An analytical model of hot rolling force for a thick plate by combining globally optimal approximation yield criterion and egg-circular velocity field

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 647-659页

作者： Shun-hu zhang Yi zhang Wen-hao tian Yan Li Shagang School of Iron and Steel Soochow UniversitySuzhou 215021JiangsuChina

For the sake of solving the problem that it is difficult to be integrated for the Mises specific plastic power due to its nonlinearity,a new linear criterion,named the globally optimal approximation criterion,is constructed by the polygonal approximation to the Mises *** new criterion is proved to be the linear function of the principal stress componentsσ1,σ2 andσ3 and the trajectory of it on theπ-plane is a non-equiangular but equilateral dodecagon intersecting the Mises *** theoretical results of the current criterion described by the Lode stress parameters are in excellent accordance with the experimental ***,according to the trend that the metallic flow velocity between rollers aggrandizes gradually from the inlet to the outlet during the hot rolling of a thick plate,a biomimetic velocity field is proposed in which the horizontal velocity component fits the egg-circular curve *** velocity field and its simulated results agree quite ***,using the determined linear criterion,energy analysis of the constructed velocity field is utilized to obtain the interior deformation power,while the vector decomposition approach is utilized to obtain the frictional power and shear *** this basis,the overall power is obtained and the analytical solutions are generated for the rolling torque,rolling force and the coefficient of the stress state under different egg curves by minimizing the neutral ***,the parameter optimization of the characteristic parameterρwhich affects the slope of the egg-circular curve is carried out and the best egg-circular curve which can minimize the energy consumption is *** best agreement between the theoretical and observed values of rolling force and rolling torque is under this curve,and the mean relative errors of the rolling torque and rolling force are no more than 2.93%,while the maximum error is no more than 8.35%.

关键词： Yield criterion Plastic deformation Rolling force Velocity field Analytical solution

Recent Progress in Improving Rate Performance of Cellulose-Derived Carbon Materials for Sodium-Ion Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第8期16卷 102-147页

作者： Fujuan Wang tianyun zhang tian zhang tianqi He Fen Ran State Key Laboratory of Advanced Processing and Recycling of Non‑Ferrous Metals Lanzhou University of TechnologyLanzhou 730050People’s Republic of China School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050People’s Republic of China School of Mechanical and Electronical Engineering Lanzhou University of TechnologyLanzhou 730050People’s Republic of China

Cellulose-derived carbon is regarded as one of the most promising candidates for high-performance anode materials in sodium-ion batteries;however,its poor rate performance at higher current density remains a challenge to achieve high power density sodium-ion *** present review comprehensively elucidates the structural characteristics of cellulose-based materials and cellulose-derived carbon materials,explores the limitations in enhancing rate performance arising from ion diffusion and electronic transfer at the level of cellulose-derived carbon materials,and proposes corresponding strategies to improve rate performance targeted at various precursors of cellulose-based *** review also presents an update on recent progress in cellulose-based materials and cellulose-derived carbon materials,with particular focuses on their molecular,crystalline,and aggregation ***,the relationship between storage sodium and rate performance the carbon materials is elucidated through theoretical calculations and characterization ***,future perspectives regarding challenges and opportunities in the research field of cellulose-derived carbon anodes are briefly highlighted.

关键词： Cellulose Hard carbon Anode materials Rate performance Sodium-ion batteries

Evolution of suspension bridge structural systems,design theories,and shape-finding methods:A literature survey

在线全文

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation Engineering(English Edition) 2024年第2期11卷 225-244页

作者： Wenming zhang Genmin tian Yupeng Chen Key Laboratory of Concrete and Pre-stressed Concrete Structures of Ministry of Education Southeast UniversityNanjing 210096China State Key Laboratory of Safety Durability and Healthy Operation of Long Span BridgesSoutheast UniversityNanjing 210096China

Modern suspension bridges exhibit a trend of lighter structures,more diversified structural forms,and longer spans,the latter already exceeding two *** performance under dead and live loads depends on their structural and main cable systems,while cablesupported bridges especially rely on the design analysis and construction control of the main *** literary survey systematically analyzes the research progress and state-ofthe-art status quo in the structural systems and design theories of suspension bridges,focusing on the structural systems,main cable shape analyses,live load effect analyses,and emerging lucrative research *** than 100 reliable references have been surveyed.(1)Multi-span or multi-main cable schemes appeal to increasing attention,which may become a better choice in terms of structural systems in scenarios with extremely long spans and heavy *** cable layouts,such as spatial main cables and hybrid cable-stayed suspension systems have also become feasible approaches for enhancing structural stiffness.(2)The shape-finding analysis during the construction phase is more complex and has more essential factors than that of the completed bridge *** theories combining analytical methods and finite element methods are more suitable for the shape-finding analysis of complex cable systems than any single theory of the two,especially for novel cable systems.(3)The live load effect analysis methods based on traditional deflection theory or modified/improved deflection theories still have wide applications,but the refined theory of treating hangers as discrete members is also constantly developing,which is expected to provide new ideas for more complex structural analysis under the different types of live loads and their distribution forms.

关键词： Suspension bridges Structural system Cable analysis Shape-finding analysis Construction control and calculation Live load effect

Assessment of runoff changes in the sub-basin of the upper reaches of the Yangtze River basin, China based on multiple methods

在线全文

学校读者我要写书评

暂无评论

Journal of Arid Land 2024年第4期16卷 461-482页

作者： WANG Xingbo zhang Shuanghu tian Yiman Department of Water Resources China Institute of Water Resources and Hydropower ResearchBeijing 100038China College of Hydrology and Water Resources Hohai UniversityNanjing 210098China

Quantitative assessment of the impact of climate variability and human activities on runoff plays a pivotal role in water resource management and maintaining ecosystem *** study considered six sub-basins in the upper reaches of the Yangtze River basin,China,to reveal the trend of the runoff evolution and clarify the driving factors of the changes during 1956–*** regression,Mann-Kendall test,and sliding t-test were used to study the trend of the hydrometeorological elements,while cumulative distance level and ordered clustering methods were applied to identify mutation *** contributions of climate change and human disturbance to runoff changes were quantitatively assessed using three methods,i.e.,the rainfall-runoff relationship method,slope variation method,and variable infiltration capacity(Budyko)hypothesis ***,the availability and stability of the three methods were *** results showed that the runoff in the upper reaches of the Yangtze River basin exhibited a decreasing trend from 1956 to 2020,with an abrupt change in *** attribution analysis,the runoff series could be divided into two phases,i.e.,1961–1985(baseline period)and 1986–2020(changing period);and it was found that the rainfall-runoff relationship method with precipitation as the representative of climate factors had limited usability compared with the other two methods,while the slope variation and Budyko hypothesis methods had highly consistent *** factors showed different effects in the sub-basins of the upper reaches of the Yangtze River ***,human disturbance was the main factor that contributed to the runoff changes,accounting for 53.0%–82.0%;and the contribution of climate factors to the runoff change was 17.0%–47.0%,making it the secondary factor,in which precipitation was the most representative climate *** results provide insights into how climate and anthropogenic changes synergistically influence the runoff of t

关键词： economic belt runoff change influencing assessment climate human activities

Two-layer Lagrange-based relay network topology and trajectory design for solar system explorations

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 342-358页

作者： Jun CAO Jian jiao Hao LIU Rongxing LU Qinyu zhang Guangdong Provincial Key Laboratory of Aerospace Communication and Networking Technology Harbin Institute of Technology (Shenzhen) Faculty of Computer Science (FCS) University of New Brunswick

Exploration targeting outer planets and even the edge of the solar system is an emerging direction for the deep-space exploration in the next decades. To address this challenge, a novel two-layer Lagrangebased relay network topology is proposed in this study. Specifically, we utilize the Sun-Mars and Sun-Saturn Lagrange points(LPs) L4 and L5 to build a two-layer backbone relay network, which ensures continuous and high-efficiency communication capability for the exploration of the solar system. Furthermore, we utilize the planetary gravity assist and design the transfer trajectory of backbone relays with the help of planetary celestial body motion equations and Kepler's laws. Moreover, we conduct link budget analysis for multihop relay transmission under Gamma-Gamma distribution, shadowed Rician fading, and additive white Gaussian noise channels in several typical exploration scenarios and validate that the LP relays can effectively support future deep-space exploration missions.

关键词： deep-space communication Lagrangian points backbone relay network transfer trajectory relay selection