检索结果-南通市图书馆

Correlation of work function and stacking fault energy through Kelvin probe force microscopy and nanohardness in diluteα-magnesium

引用

Journal of Magnesium and Alloys 2024年第1期12卷 237-250页

作者： Yigit türe Ali Arslan Kaya Hüseyin Aydin Jiang Peng Servet turan Eskisehir technical University Porsuk Vocational SchoolElectronics and Automation DepartmentProgram of MechatronicsEskisehirTurkey Mugla Sitki Kocman University Engineering FacultyMetallurgy and Materials Engineering DepartmentMuglaTurkey Hüseying Aydın TUBITAK MRCTurkey Jiang Peng Chongqing UniversityChina Eskisehir technical University Engineering FacultyMaterials Science and Engineering DepartmentEskisehirTurkey

Electronic interactions of the Group 2A elements with magnesium have been studied through the dilute solid solutions in binary Mg-Ca,Mg-Sr and Mg-Ba *** investigation incorporated the difference in the‘Work Function'(ΔWF)measured via Kelvin Probe Force Microscopy(KPFM),as a property directly affected by interatomic bond types,*** electronic structure,nanoindentation measurements,and Stacking Fault Energy values reported in the *** was shown that the nano-hardness of the solid-solutionα-Mg phase changed in the order of Mg-Ca>Mg-Sr>***,it was shown,by also considering the nano-hardness levels,that SFE of a solid-solution is closely correlated with its‘Work Function'***-hardness measurements on the eutectics andΔWF difference between eutectic phases enabled an assessment of the relative bond strength and the pertinent electronic structures of the eutectics in the three *** withΔWF and at least qualitative verification of those computed SFE values with some experimental measurement techniques were considered important as those computational methods are based on zero Kelvin degree,relatively simple atomic models and a number of *** asserted by this investigation,if the results of measurement techniques can be qualitatively correlated with those of the computational methods,it can be possible to evaluate the electronic structures in alloys,starting from binary systems,going to ternary and then multi-elemental *** investigation has shown that such a qualitative correlation is *** all,the SFE values are not treated as absolute values but rather become essential in comparative investigations when assessing the influences of alloying elements at a fundamental level,that is,free electron density *** study indicated that the principles of‘electronic metallurgy'in developing multi-elemental alloy systems can be followed via practical experimental methods,i.e.ΔWF measurements using KPF

关键词： Mg alloys Dilute alloys Work function Stacking fault energy Kelvin probe force microscopy Short range order Miedema Nanoindentation Eutectics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Increasing polymer scission rate by tying an overhand knot

引用

Science China Chemistry 2024年第11期67卷 3498-3499页

作者： Yuheng Hu Jennifer t.Ou Jim Y.Huang Yuanning Feng Department of Chemistry and Biochemistry The University of Oklahoma

Similar to the phenomenon of knotted ropes in life, knotted climbing ropes will reduce their strength due to knots. Although computer simulations [1], theoretical speculation[2,3], and intuition [3] suggest that similar processes may occur at the nanoscale, this hypothesis has not been experimentally proven before. With the increasing maturity of molecular recognition and self-assembly, a research communication by Leigh et al. [4] published in Nature Chemistry introduced a molecular overhand knot into a polymer to study its effect on the scission rate of the polymer chain under tension.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Getting the Most Out of Every training Day: the Influence of Instructors on Self-Regulated Learning During Firefighter Leadership Courses

引用

International Journal of Disaster Risk Science 2024年第3期15卷 332-345页

作者： Stefan R?seler Micha Hilbert Guido Hertel Meinald t.thielsch Department of Psychology University of Münster

Leadership courses in the fire services are highly challenging, and they can seriously exhaust trainees and hamper their selfregulated learning efforts(for example, setting goals, focusing attention, seeking feedback). We theorize that experiences of failure or overload can curtail trainees' available energy resources on subsequent training days, which, in turn, should affect trainees' learning efforts. Given instructors' central role in leadership courses, we hypothesize that supportive and humble instructor behaviors decrease experiences of failure and overload and, thus, increase self-regulated learning. Moreover, we argue that supportive instructor behavior may amplify the positive effects of high energy resources, while humble behavior may alleviate the negative impact of low resource levels. We tested preregistered hypotheses with 118 firefighters participating in two-week leadership courses at a German fire academy. the participants completed short web-based questionnaires before and after classes each day. Multilevel analyses confirmed that perceived daily supportive and humble instructor behavior predicted trainees' reports of daily self-regulated learning activity. Notably, this effect was independent from positive effects of trainees' reported energy resources in the morning. Supportive and humble behavior did not moderate the eff ect of energy resources. Our findings suggest that instructors play a crucial role in facilitating effective learning under challenging training conditions. Furthermore, we offer implications for leaders in fire services, who often conduct trainings with their subordinates.

关键词： Diary study Fire services Instructor behavior Leadership training Resource investment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficient guiding and focusing of intense laser pulse using periodic thin slits

引用

Matter and Radiation at Extremes 2024年第4期9卷 29-39页

作者： L.Xu t.W.Huang K.Jiang C.N.Wu H.Peng P.C.hen R.Li H.B.Zhuo C.t.Zhou Shenzhen Key Laboratory of Ultraintense Laser and Advanced Material technology Center for Intense Laser ApplicationTechnologyand College of Engineering PhysicsShenzhen Technology UniversityShenzhen 518118People’s Republic of China

Slits have been widely used in laser-plasma interactions as plasma optical components for generating high-harmonic light and controlling laser-driven particle ***,we propose and demonstrate that periodic thin slits can be regarded as a new breed of optical elements for efficient focusing and guiding of intense laser *** fundamental physics of intense laser interaction with thin slits is studied,and it is revealed that relativistic effects can lead to enhanced laser focusing far beyond the pure diffractive focusing *** addition,the interaction of an intense laser pulse with periodic thin slits makes it feasible to achieve multifold enhancement in both laser intensity and energy transfer efficiency compared with conventional *** results provide a novel method for manipulating ultra-intense laser pulses and should be of interest for many laser-based applications.

关键词： laser pulse intense

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evaluation of periglacial landforms and formation of soil properties on the Mount Honaz,SW türkiye

引用

Journal of Mountain Science 2024年第9期21卷 3047-3067页

作者： SERİN Soner UNCU Levent DEDE Volkan tÜRKEŞMurat Institute of Social Sciences İstanbul Universityİstanbul 34119Türkiye Department of Geography BilecikŞeyh Edebali UniversityBilecik 11234Türkiye Department of Geography Ardahan UniversityArdahan 75002Türkiye Center for Climate Change and Policy Studies Boğaziçi Universityİstanbul 34342Türkiye

the main aim of this study is to explain periglacial processes on the summits of Mount Honaz(2571 m a.s.l.),define periglacial landforms,and determine the relationships between morphometric features and topographic *** circles,stony earth circles,non sorted steps,and non sorted stripes were identified on the summits of Mount ***'s correlation coefficient(r)and linear regression analyses were performed by taking metric measurements from 125 periglacial landforms to describe their morphometric features(length,width,height)of periglacial landforms and explain the relationships between them and topographic factors(elevation,slope).to explain the relationships between periglacial landforms and soil properties,soil samples from 11 periglacial landforms were taken and *** landforms,which continue to develop on the summits of Mount Honaz today,have been evaluated with present climate *** of soil samples indicates a notable impact of parent material on the genesis of periglacial *** high ratio of organic matter in mud circle and non sorted step landforms and the high lime ratio in stony earth circle landforms prove a strong relationship between the formation mechanisms of landforms and the soil ***,it is consistent with the findings obtained from the analysis that severe periglacial processes and washing and scavenging events are experienced more on the northern slopes.

关键词： Periglacial processes and geomorphology Soil analysis Morphometric analysis Mount Honaz türkiye

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

technological advancements in millet dehulling and polishing process: An insight into pretreatment methods, machineries and impact on nutritional quality

引用

Grain & Oil Science and technology 2024年第3期7卷 186-195页

作者： Shagolshem Mukta Singh Jayasree Joshi t P.Srinivasa Rao Agricultural and Food Engineering Department Indian Institute of Technology KharagpurKharagpurWest Bengal 721302India

Millets are widely recognized for their nutritional significance;however, the methods employed for their processing are currently lacking. this article primarily focuses on the advanced technologies and progressions in millet dehulling and polishing. these technologies operate based on the fundamental principles of compression-shearing, abrasion-friction, and centrifugal-impact forces. Processing of millets can be challenging because of the physical characteristics and tight attachment of hull and bran to the endosperm. However, several dehullers have been designed to solve this problem for different kinds of millets. In addition, the nutritional and anti-nutritional characteristics undergo alterations due to both dehulling and polishing processes. these alterations are thoroughly examined and discussed in this article. Specifically, anti-nutrients such as tannins and phytate are predominantly found in the outer pericarp of the grain and experience a reduction after undergoing dehulling and polishing. the nutritional properties are also subjected to a reduction;however, this reduction can be mitigated by subjecting the grains to certain pretreatments before dehulling and polishing. these treatments serve to enhance dehulling efficiency and nutrient digestibility while simultaneously reducing the presence of anti-nutrients. Novel thermal and non-thermal methodologies such as microwave, hydrothermal, high-pressure processing, and ohmic heating can be employed for processing millets, thereby diminishing the loss of nutrients. Additional research can be carried out to investigate their impact on the dehulling and polishing of millets.

关键词： Millets Dehulling Polishing Pretreatment Novel thermal and non-thermal techniques

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Boosting the catalytic activity toward oxygen reduction via a heterostructure of porous iron oxide-decorated 2D NiO/NG nanosheets

引用

Journal of Energy Chemistry 2024年第6期93卷 669-681,I0016页

作者： Kakali Maiti Matthew t.Curnan Hyung Jun Kim Kyeounghak Kim Jeong Woo Han Department of Chemical Engineering Pohang University of Science and Technology(POSTECH)PohangGyeongbuk 37673Republic of Korea Department of Materials Science and Engineering Research Institute of Advanced MaterialsSeoul National UniversitySeoul 08826Republic of Korea Department of Chemical Engineering Clean-Energy Research InstituteHanyang UniversitySeoul 04763Republic of Korea CSIR-Institute of Minerals and Materials technology RRL CampusAcharya ViharBhubaneswarOdisha 751013India

As a noble metal substitute,two-dimensional(2D)hierarchical nano-frame structures have attracted great interest as candidate catalysts due to their remarkable advantages-high intrinsic activity,high electron mobility,and straightforward surface ***,they may replace Pt-based catalysts in oxygen reduction reaction(ORR)***,a simple method is developed to design hierarchical nano-frame structures assembled via 2D NiO and N-doped graphene(NG)*** procedure can yield nanostructures that satisfy the criteria correlated with improved electrocatalytic performance,such as large surface area,numerous undercoordinated atoms,and high defect ***,porous NG nanosheet architectures,featuring NiO nanosheets densely coordinated with accessible holey Fe_(2)O_(3) moieties,can enhance mesoporosity and balance *** improvements can facilitate charge transport and expose formerly inaccessible reaction sites,maximizing active site density *** functional theory(DFt)calculations reveal favored O_(2) adsorption and dissociation on Fe_(2)O_(3) hybrid structures when supported by 2D NiO and NG nanomaterials,given 2D materials donated charge to Fe_(2)O_(3) active *** systematic studies reveal that synergistic contributions are responsible for enriching the catalytic activity of Fe_(2)O_(3)@NiO/NG in alkaline media-encompassing internal voids and pores,unique hierarchical support structures,and concentrated N-dopant and bimetallic atomic ***,this work expands the toolbox for designing and synthesizing highly efficient 2D/2D shelled functional nanomaterials with transition metals,endeavoring to benefit energy conversion and related ORR applications.

关键词： N-doped graphene Holey Fe_(2)O_(3)nanocrystals NiO nanosheets High catalytic performance ORR

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Reply to the note by Li Piani et al.

引用

Defence technology（防务技术） 2024年第1期31卷 603-606页

作者： t.Li Piani J.Weerheijm L.J.Sluys tU Delft Stevinweg 12628 CNDelftthe Netherlands tNO PO Box 452280 AARijswijkthe Netherlands NLDA Faculty of Military Sciences1781 CADen Helderthe Netherlands

In 2017,a ballistic phenomenological model was proposed by the authors of Ref.[1] to numerically simulate the experimental depths of small caliber projectiles impacting walls made of *** opportunity for a new model in the field revealed from the observation that two older models recently used by the authors of Ref.[2] shared a linear relationship between the penetration depth P and the impacting velocity v_(O).

关键词： Penetration Adobe Modeling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Aerodynamics of a tandem-Bladed Axial Compressor Rotor under Circumferential Distortion at Different Rotational Speeds

引用

Journal of thermal Science 2024年第4期33卷 1340-1356页

作者： Amit KUMAR Jerry t.JOHN A.M.PRADEEP R.A.DAKKERMANS Dragan KOZULOVIC Department of Aerospace Engineering Indian Institute of Technology BombayMumbai400076India Department of Automotive and Aeronautical Engineering Hamburg University of Applied Sciences20099HamburgGermany Institute of Jet Propulsion Bundeswehr University Munich85577NeubibergGermany

For most aircraft engines,inflow distortion is *** distortion is known to degrade the aerodynamic performance and stable operating limits of a *** rotor configuration is an arrangement that effectively controls the growth of the boundary layer over the suction surface of the ***,a higher total pressure rise can be achieved through this unconventional design approach involving the splitting of the blade into forward and aft *** is expected that the effect of inlet flow distortion would be more severe for a tandem-rotor design due to the greater flow turning inherent in such ***,this aspect needs to be thoroughly *** present study discusses the effect of circumferential distortion on the tandem-rotor at different rotational ***-annulus RANS simulations using ANSYS CFX are used in the present *** performance of the rotor at a particular flow coefficient and different rotational speeds is *** total pressure and efficiency are observed to drop at lower mass flow rates under the influence of circumferential *** loss region in each blade passage is mainly associated with the blade wake,tip leakage vortex,secondary flow,and boundary ***,their contribution varies from passage to passage,particularly in the distorted *** the lower span,the wake width is found to be higher than that at a higher *** to the redistribution of the mass flow,the circumferential extent reduces at a higher *** the undistorted sector,the strength of the tip leakage vortex is significantly higher at the design rotational speed than at lower *** distortion near the tip region promotes an early vortex breakdown even at the design operating *** adversely affects the total pressure,efficiency,and stall *** clean flow conditions,this phenomenon is only observed near the stall *** the design operating condition,the breakdown of the forward rotor tip l

关键词： tandem rotor circumferential distortion loss tip leakage vortex vortex breakdown diffusion factor aerodynamics of compressor blade

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A particle-resolved heat-particle-fluid coupling model by DEM-IMB-LBM

引用

Journal of Rock Mechanics and Geotechnical Engineering 2024年第6期16卷 2267-2281页

作者： Ming Xia Jinlong Fu Y.t.Feng Fengqiang Gong Jin Yu Hunan Key Laboratory of Geomechanics and Engineering Safety Xiangtan UniversityXiangtan411105China Zienkiewicz Institute for Modelling Data and AISwansea UniversitySwanseaSA18EPUK School of Civil Engineering Southeast UniversityNanjing211189China Fujian Research Center for tunneling and Urban Underground Space Engineering Huaqiao UniversityXiamen361021China

Multifield coupling is frequently encountered and also an active area of research in geotechnical *** this work,a particle-resolved direct numerical simulation(PR-DNS)technique is extended to simulate particle-fluid interaction problems involving heat transfer at the grain *** this extended technique,an immersed moving boundary(IMB)scheme is used to couple the discrete element method(DEM)and lattice Boltzmann method(LBM),while a recently proposed Dirichlet-type thermal boundary condition is also adapted to account for heat transfer between fluid phase and solid *** resulting DEM-IBM-LBM model is robust to simulate moving curved boundaries with constant temperature in thermal *** facilitate the understanding and implementation of this coupled model for non-isothermal problems,a complete list is given for the conversion of relevant physical variables to lattice ***,benchmark tests,including a single-particle sedimentation and a two-particle drafting-kissing-tumbling(DKt)simulation with heat transfer,are carried out to validate the accuracy of our coupled *** further investigate the role of heat transfer in particle-laden flows,two multiple-particle problems with heat transfer are *** examples demonstrate that the proposed coupling model is a promising high-resolution approach for simulating the heat-particle-fluid coupling at the grain level.

关键词： Particle-fluid interaction Heat transfer Discrete element method(DEM) Lattice Boltzmann method(LBM) Dirichlet-type thermal boundary Direct numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：