检索结果-南通市图书馆

Wireless Sensor Network 2016年第8期8卷 166-175页

作者： Piyush Charan Tahsin Usmani Rajeev Paulus syed hasan saeed Department of Electronics and Communication Engineering Integral University Lucknow India Department of Electronics and Communication Engineering SHIATS-Deemed University Allahabad India

Over the past years, wireless sensor systems have picked up a global consideration from both the researchers and the genuine clients. It includes a large number of sensing devices, some computing techniques and communication with limited power supplies and processing abilities which collectively work to fulfill a large sensing task. IEEE 802.15.4/ZigBee based Wireless Sensor Networks raise a few issues like Energy Scavenging for the limited power supply. Accordingly good functioning of such system relies upon energies of the wireless motes. This paper presents two analytical models which demonstrate and predict the QoS in terms of throughput, jitter, average end-to-end delay and energy consumption. These two distinct network models based on IEEE 802.15.4 are cluster-based and grid-based, and are simulated using QualNet v 6.1 Simulator.

关键词： WSN IEEE 802.15.4 ZigBee AODV QualNet Energy Consumption QoS

Performance of Distributed Energy Aware Routing (DEAR) Protocol with Cooperative Caching for Wireless Sensor Networks

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Wireless Sensor Network 2019年第3期11卷 35-45页

Considering Wireless Sensor Networks (WSNs) in today’s scenario, sending and receiving uninterrupted sensory data remains a challenge to achieve with minimal latency and energy consumption as low as possible. Energy consumption is exponentially growing in computing devices such as computers, embedded systems, portable devices, and wireless sensor networks. Extensive research has been in practice recently to minimize energy consumption without compromising the Quality of Service (QoS) that is to provide data to the requester node with minimum Delay and high Reliability. In this paper, a cooperative caching algorithm is used with the proposed Distributed Energy Aware Routing (DEAR) protocol that attempts to minimize energy consumption by reducing the packet overhead in the network and also providing the data to the requester with minimum delay by retrieving requested datum from the nearby caching node available in the vicinity of the requester or sink node. The simulation results clearly show that the energy consumption is less when the grid-based analytical model is used against the star/cluster based model while keeping the same necessary attributes.

关键词： DEAR WSNs Energy Aware Routing IEEE 802.15.4 ZigBee Cooperative Caching

品牌故事情境下顾客感知价值对品牌态度作用机制研究

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

品牌故事情境下顾客感知价值对品牌态度作用机制研究

作者： hasan SAMI AHMED saeed 燕山大学

学位级别：硕士

Plant Nitrogen Metabolism: Balancing Resilience to Nutritional Stress andAbiotic Challenges

同方学位论文库评论

在线全文

同方学位论文库

学校读者我要写书评

暂无评论

Phyton-International Journal of Experimental Botany 2024年第3期93卷 581-609页

作者： Muhammad Farhan Manda Sathish Rafia Kiran Aroosa Mushtaq Alaa Baazeem Ammarah Hasnain Fahad Hakim syed Atif hasan Naqvi Mustansar Mubeen Yasir Iftikhar Aqleem Abbas Muhammad Zeeshan Hassan Mahmoud Moustafa Department of Plant Pathology Faculty of Agricultural Sciences&TechnologyBahauddin Zakariya UniversityMultan60800Pakistan Centro de Investigación de Estudios Avanzados del Maule(CIEAM) Vicerrectoría de Investigación y PostgradoUniversidad Católica del MauleTalca3460000Chile College of Food Science and Nutritional Engineering China Agricultural UniversityBeijingChina Department of Biology College of ScienceTaif UniversityP.O.Box 11099Taif21944Saudi Arabia Department of Biotechnology Faculty of Biological SciencesLahore University of Biological and Applied SciencesLahorePakistan Department of Plant Pathology College of AgricultureUniversity of SargodhaSargodha40100Pakistan Department of Agriculture and Food Technology Karakorum International UniversityGilgitPakistan Department of Biology Faculty of ScienceKing Khalid UniversityAbhaSaudi Arabia

Plant growth and resilience to abiotic stresses,such as soil salinity and drought,depend intricately on nitrogen *** review explores nitrogen’s regulatory role in plant responses to these challenges,unveiling a dynamic interplay between nitrogen availability and abiotic *** the context of soil salinity,a nuanced rela-tionship emerges,featuring both antagonistic and synergistic interactions between salinity and nitrogen ***-induced chlorophyll depletion in plants can be alleviated by optimal nitrogen supplementation;however,excessive nitrogen can exacerbate salinity *** delve into the complexities of this interaction and its agri-cultural ***,a vital element within essential plant structures like chloroplasts,elicits diverse responses based on its *** review comprehensively examines manifestations of nitrogen deﬁciency and toxicity across various crop types,including cereals,vegetables,legumes,and ***,we explore the broader consequences of nitrogen products,such as N_(2)O,NO_(2),and ammonia,on human ***-ing the intricate relationship between nitrogen and salinity,especially chloride accumulation in nitrate-fed plants and sodium buildup in ammonium-fed plants,is pivotal for optimizing crop nitrogen ***,prudent nitrogen use is essential,as overapplication can exacerbate nitrogen-related *** Use Efﬁ-ciency(NUE)is of paramount importance in addressing salinity challenges and enhancing sustainable crop *** this goal requires advancements in crop varieties with efﬁcient nitrogen utilization,pre-cise timing and placement of nitrogen fertilizer application,and thoughtful nitrogen source selection to mitigate losses,particularly urea-based fertilizer *** review article delves into the multifaceted world of plant nitrogen metabolism and its pivotal role in enabling plant resilience to nutritional stress and abiotic chall

关键词： Synthetic nitrogen nitrogen signaling sustainable agriculture eutrophication ammonium nitrate

光驱动Rh/InGaN_(1-x)O_(x)纳米组装体甲烷干重整制合成气

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science Bulletin 2024年第10期69卷 1400-1409页

作者：李亦昕李景林俞天奇邱亮 syed M.Najib hasan 姚琳潘虎 Shamsul Arafin Sharif Md.Sadaf 朱磊周宝文 Key Laboratory for Power Machinery and Engineering of Ministry of Education Research Center for Renewable Synthetic FuelSchool of Mechanical EngineeringShanghai Jiao Tong UniversityShanghai 200240China China-UK Low Carbon College Shanghai Jiao Tong UniversityShanghai 201306China Centre Energie Matériaux et TélécommunicationsInstitut National de la Recherche Scientifique(INRS)-Universitédu QuébecVarennes J3X 1E4Canada Department of Electrical and Computer Engineering The Ohio State UniversityColumbusOH43210USA

Light-driven dry reforming of methane toward syngas presents a proper solution for alleviating climate change and for the sustainable supply of transportation fuels and ***,Rh/InGaN_(1-x)O_(x) nanowires supported by silicon wafer are explored as an ideal platform for loading Rh nanoparticles,thus assembling a new nanoarchitecture for this grand *** combination with the remarkable photothermal synergy,the O atoms in Rh/InGaN_(1-x)O_(x) can significantly lower the apparent activation energy of dry reforming of methane from 2.96 eV downward to 1.70 *** as-designed Rh/InGaN_(1-x)O_(x) NWs nanoarchitecture thus demonstrates a measurable syngas evolution rate of 180.9 mmol g_(cat)^(-1) h^(-1) with a marked selectivity of 96.3% under concentrated light illumination of 6 W cm^(-2).What is more,a high turnover number(TON)of 4182 mol syngas per mole Rh has been realized after six reuse cycles without obvious activity *** correlative 18O isotope labeling experiments,in-situ irradiated X-ray photoelectron spectroscopy(ISI-XPS)and in-situ diffuse reflectance Fourier transform infrared spectroscopy characterizations,as well as density functional theory calculations reveal that under light illumination,Rh/InGaN_(1-x)O_(x) NWs facilitate releasing^(*)CH_(3) and H^(+)from CH_(4) by holes,followed by H_(2) evolution from H^(+)reduction with ***,the O atoms in Rh/InGaN_(1-x)O_(x) can directly participate in CO generation by reacting with the ^(*)C species from CH_(4) dehydrogenation and contributes to the coke elimination,in concurrent formation of O *** resultant O vacancies are then replenished by CO_(2),showing an ideal chemical *** work presents a green strategy for syngas production via light-driven dry reforming of methane.

关键词： Dry reforming of methane Photo-thermal catalysis Rh/InGaN_(1-x)O_(x)nanowires

Long-term outcomes of titanium-nitride-oxide coated stents and drug-eluting stents in acute coronary syndrome:A systematic review and meta-analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Cardiology 2024年第5期16卷 293-305页

作者： Muhammad Ahmed Ali Fahim Afia Salman Hira Anas Khan syed Muhammad hasan Muskan FatimaBhojani Sarah Aslam Amna Zia Ul Haq Vishal Reddy Bejugam Beena Muntaha Nasir Wajiha Gul Abdul Moeed Abdelrahman S Abdalla Muhammad Majid Muhammad Sohaib Asghar Md Al Hasibuzzaman Department of Internal Medicine Dow University of Health SciencesKarachi 74200Pakistan Department of Internal Medicine North Central Bronx HospitalBronxNY 10467United States Department of Urology Center for Academic MedicineStanford University School of MedicinePalo AltoCA 33872United States Department of Cardiovascular Imaging Cleveland ClinicClevelandOH 44195United States Division of Nephrology and Hypertension Mayo Clinic RochesterRochesterMN 55905United States Institute of Nutrition and Food Science University of DhakaDhaka 1000Bangladesh

BACKGROUND In severe cases of coronary artery disease,percutaneous coronary intervention provide promising *** stent used could be a drug-eluting stent(DES)or a titanium-nitride-oxide coated stent(TiNOS).AIM To compare the 5-year effectiveness and safety of the two stent *** The following systematic review and meta-analysis was conducted in accordance with the preferred reporting items for systematic reviews and meta-analysis guidelines,and PubMed/MEDLINE,Scopus,and Cochrane Central were searched from inception till August *** outcomes were major adverse cardiac events(MACE),cardiac death,myocardial infarction(MI),cardiac death or MI,and ischemia-driven total lesion revascularization(ID-TLR).RESULTS Four randomized controlled trials(RCT),which analyzed a sum total of 3045 patients with acute coronary syndrome(ACS)after a median follow-up time of 5 years were *** statistically insignificant,an increase in the ID-TLR was observed in patients receiving TiNOSs vs *** addition,MI,cardiac death and MI,and definite stent thrombosis(DST)were significantly decreased in the TiNOS *** analysis revealed no significant results with meta-regression presenting non-ST elevated MI(NSTEMI)as a statistically significant covariate in the outcome of *** TiNOS was found to be superior to DES in terms of MI,cardiac death or MI,and DST outcomes,however,the effect of the two stent types on ID-TLR and MACE was not significant.A greater number of studies are required to establish an accurate comparison of patient outcomes in TiNOS and DES.

关键词： Stents Drug-eluting Major adverse cardiac events All-cause death Meta-analysis

Low testing rates and high BRCA prevalence: Poly (ADP-ribose) polymerase inhibitor use in Middle East BRCA/homologous recombination deficiency-positive cancer patients

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Oncology 2024年第7期15卷 848-858页

作者： Naveed syed Ashish Vittalrao Chintakuntlawar Deepti Vilasini Aisha Mohamed Al Salami Riad Al hasan Imrana Afrooz Kanishka Uttam Chandani Ashok Uttam Chandani Aref Chehal Department of Hematology and Oncology Sheikh Shakbout Medical CityAbu Dhabi 11001United Arab Emirates Department of Oncology Mayo ClinicRochesterNY 790339United States Department of Oncology Sheikh Shakbout Medical CityAbu Dhabi 11001United Arab Emirates Clinical Research Sheikh Shakbout Medical CityAbu Dhabi 11001United Arab Emirates Department of Internal Medicine Landmark Medical CenterRhode IslandRI 02895United States

BACKGROUND Poly(ADP-ribose)polymerase inhibitors(PARPis)are approved as first-line therapies for breast cancer gene(BRCA)-positive,human epidermal growth factor receptor 2-negative locally advanced or metastatic breast *** are also effective for new and recurrent ovarian cancers that are BRCA-or homologous recombination deficiency(HRD)-***,data on these mutations and PARPi use in the Middle East are *** To assess BRCA/HRD prevalence and PARPi use in patients in the Middle East with breast/ovarian *** This was a single-center retrospective study of 57 of 472 breast cancer patients tested for BRCA mutations,and 25 of 65 ovarian cancer patients tested for *** adult patients participated in at least four visits to the oncology service at our center between August 2021 and May *** were summarized using descriptive statistics and compared using counts and *** to treatment was assessed using Response Evaluation Criteria in Solid Tumors *** Among the 472 breast cancer patients,12.1%underwent BRCA testing,and 38.5%of 65 ovarian cancer patients received HRD *** mutations were found in 25.6%of the tested patients:26.3%breast cancers had germline BRCA(gBRCA)mutations and 24.0%ovarian cancers showed ***,40.0%of gBRCA-positive breast cancers and 66.0%of HRD-positive ovarian cancers were Middle Eastern and Asian patients,*** treatment was used in 5(33.3%)gBRCA-positive breast cancer patients as first-line therapy(n=1;7-months progression-free),for maintenance(n=2;>15-months progression-free),or at later stages due to compliance issues(n=2).Four patients(66.6%)with HRD-positive ovarian cancer received PARPi and all remained *** Lower testing rates but higher BRCA mutations in breast cancer were *** reflected United Arab Emirates demographics,with breast cancer in Middle Eastern and ovarian cancer in Asian patients.

关键词： Homologous recombination repair BRCA1 BRCA2 Homologous recombination deficiency Ovarian cancer Breast cancer Poly(ADP-ribose)polymerase inhibitors Olaparib DNA double-strand breaks

A Novel Cryptocurrency Prediction Method Using Optimum CNN

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2022年第4期71卷 1051-1063页

作者： syed H.hasan syeda Huyam hasan Mohammed Salih Ahmed syed Hamid hasan Iowa State University AmesUSA University of Texas at Arlington USA Department of Computer Engineering College of Computer Science and Information TechnologyImam Abdulrahman Bin Faisal UniversityDammamSaudi Arabia Department of Information Systems Faculty of Computing and Information TechnologyKing Abdulaziz UniversityJeddahSaudi Arabia

In recent years,cryptocurrency has become gradually more significant in economic regions *** cryptocurrencies,records are stored using a cryptographic *** main aim of this research was to develop an optimal solution for predicting the price of cryptocurrencies based on user opinions from social *** is used as a marketing tool for cryptoanalysis owing to the unrestricted conversations on cryptocurrencies that take place on social media ***,this work focuses on extracting Tweets and gathering data from different sources to classify them into positive,negative,and neutral categories,and further examining the correlations between cryptocurrency movements and Tweet *** paper proposes an optimized method using a deep learning algorithm and convolution neural network for cryptocurrency prediction;this method is used to predict the prices of four cryptocurrencies,namely,Litecoin,Monero,Bitcoin,and *** results of analyses demonstrate that the proposed method forecasts prices with a high accuracy of about 98.75%.The method is validated by comparison with existing methods using visualization tools.

关键词： Cryptocurrency litecoin monero bitcoin ethereum twitter optimal CNN price prediction sentiment analysis

Nickel-titanium shape memory alloys made by selective laser melting:a review on process optimisation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2022年第1期10卷 24-58页

作者： Omar Ahmed Mohamed syed hasan Masood Wei Xu School of Engineering Deakin UniversityGeelongVIC 3216Australia Department of Mechanical Engineering The Higher Institute of Engineering TechnologyBani WaledLibya Department of Mechanical and Product Design Engineering Swinburne University of TechnologyHawthornVIC 3122Australia

Selective laser melting(SLM)is a mainstream powder-bed fusion additive manufacturing(AM)process that creates a three-dimensional(3D)object using a high power laser to fuse fine particles of various metallic powders such as copper,tool steel,cobalt chrome,titanium,tungsten,aluminium and stainless *** the past decade,SLM has received significant attention due to its capability in producing dense parts with superior mechanical *** a premier shape memory alloy,the nickel-titanium(NiTi)shape memory alloy is attractive for a variety of biomedical applications due to its superior mechanical properties,superelasticity,corrosion resistance and *** paper presents a comprehensive review of the recent progress in NiTi alloys produced by the SLM process,with a particular focus on the relationship between processing parameters,resultant microstructures and *** research gaps,challenges and suggestions for future research are also addressed.

关键词： Additive manufacturing(AM) Selective laser melting(SLM) Microstructure NiTi alloy Mechanical properties

Modeling, analysis, and optimization of dimensional accuracy of FDM-fabricated parts using definitive screening design and deep learning feedforward artificial neural network

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2021年第1期9卷 115-129页

作者： Omar Ahmed Mohamed syed hasan Masood Jahar Lal Bhowmik School of Engineering Deakin UniversityGeelongAustralia Department of Mechanical Engineering Higher Institute of Engineering TechnologyBani WalidLibya Department of Mechanical and Product Design Engineering Swinburne University of TechnologyHawthornVIC 3122Australia Department of Health Science and Biostatistics Swinburne University of TechnologyHawthornVIC 3122Australia

Additive manufacturing(AM)technologies such as fused deposition modeling(FDM)rely on the quality of manufactured products and the process ***,the dimensional accuracy and stability of any AM process is essential for ensuring that customer specifications are satisfied at the highest standard,and variations are controlled without significantly affecting the functioning of processes,machines,and product *** study aims to investigate the effects of FDM fabrication conditions on the dimensional accuracy of cylindrical *** this study,a new class of experimental design techniques for integrated second-order definitive screening design(DSD)and an artificial neural network(ANN)are proposed for designing experiments to evaluate and predict the effects of six important operating *** determining the optimum fabrication conditions to obtain better dimensional accuracies for cylindrical parts,the time consumption and number of complex experiments are reduced considerably in this *** optimum fabrication conditions generated through a second-order DSD are verified with experimental *** results indicate that the slice thickness,part print direction,and number of perimeters significantly affect the percentage of length difference,whereas the percentage of diameter difference is significantly affected by the raster-to-raster air gap,bead width,number of perimeters,and part print ***,the results demonstrate that a second-order DSD integrated with an ANN is a more attractive and promising methodology for AM applications.

关键词： Artificial neural network(ANN) OptimizationDefinitive screening design(DSD) Analysis of variance(ANOVA) Fused deposition modeling(FDM) Dimensional accuracy