检索结果-南通市图书馆

Comparative Analysis of Four Stem Taper Models for Quercus glauca in Mount Halla,Jeju Island,South Korea

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2014年第2期11卷 442-448页

作者： LUMBRES Roscinto Ian Canicosa LEE Young Jin CHOI Hyung Soon KIM sung Yong JANG Mi Na ABINO Azyleah Caizares SEO Yeon ok KIM Chan Soo PARK Jung Hwan Department of Forest Resources Kongju National University College of Forestry- Benguet State University La Trinidad Benguet 2601 Philippines Warm Temperate and Subtropical Forest Research Center Korea Forest Research Institute

This study was conducted to fit the diameter-height data of Quercusglaucain Jeju Island, South Korea to the four commonly used stem taper equations andto evaluate the performance of the four stem taper models using four statistical criteria： Fit index （FI）, root mean square error （RMSE）, bias （）,and absolute mean difference （AMD）. Results showed that the Kozak02stem taper equation provided the best FI（0.9847）, RMSE（1.5745）,（-0.0030 cm） and AMD （1.0990 cm） whileMax and Burkhart model had the poorest performance among the four stem taper models based on the four evaluation statistics （FI ： 0.9793,RMSE ： 1.8272, ： 0.3040 cm and AMD ： 1.3060 cm）. These stem taper equations can serve as a useful tool for forest managers in estimating the diameter outside bark at any given height, merchantable stem volumes and total stem volumesof the standing trees of Quercusglaucain theGotjawal forests located in Mount Halla, Jeju Island, South Korea.

关键词： MountHalla Merchantable stem volume Diameter outside bark Kozak model Model evaluation

Fabrication of Dual-pore Scaffolds Using a Combination of Wire-Networked Molding （WNM） and Non-solvent Induced Phase Separation （NIPS） Techniques

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2015年第4期12卷 565-574页

作者： Dong Guk sohn Myoung Wha Hong Young Yul Kim Young-Sam Cho Division of Mechanical and Automotive Engineering College of Engineering Wonkwang University 460 Iksandae-ro Iksan Jeonbuk 570-749 Republic of Korea Department of Orthopedics Daejeon St. Mary's Hospital Catholic University of Korea 64 Daeheung-ro Jung-gu Daejeon 301-723 Republic of Korea

In this study, to fabricate dual-pore scaffolds with interconnected pores, Non-solvent Induced Phase Separation （NIPS） and Wire-Network Molding （WNM） techniques were combined. First, a mold with uniform slits was prepared, and needles were inserted into the mold. Subsequently, polycaprolactone （PCL） pellets were dissolved in tetrahydrofuran （THF） at a specified ratio. The slurry was mixed using hot plate stirrer at 1200 rpm for 24 hours at 40 ~C. The PCL slurry was subsequently injected into the mold. Thereafter, to exchange the THF （solvent） with the ethanol （non-solvent）, the mold was soaked in an ethanol bath. After removing the mold from the ethanol bath, the needles were removed from the mold. Consequently, dual-pore scaffold with interconnected pores was obtained. The surface morphology of the fabricated scaffolds were observed using Scanning Electron Microscope （SEM）. Moreover, cell culture experiments were performed using the CCK-8 assay, and the characteristics of cells grown on the dual-pore scaffolds were assessed and were compared with the NIPS-based 3D plotting scaffold.

关键词： tissue engineering scaffold polycaprolactone (PCL) Wire-Network Molding (WNM) Non-solvent Induced Phase Separation (NIPS)

Local Energy and Planned Ramping Product Joint Market Based on a Distributed Optimization Method

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2021年第6期7卷 1357-1368页

作者： Zhong Zhang Furong Li sung-Won Park sung-Yong Son Dalian University of Technology DalianChina Department of Electronic and Electrical Engineering University of BathBathU.K. the University of Bath BathU.K. the Department of Electrical and Electronic Engineering Youngsan UniversitySouth Korea Gachon University SeoulSouth Korea

High penetration of renewable energy generation(REG)in the distribution system increases both the power uncertainty at a given interval and the power variation between two *** markets addressing power uncertainty have been widely ***,there is a lack of market mechanisms regarding the power variation of the load and *** paper thus defines a planned ramping(PR)product to follow the net load variation and extends the local energy market to include the trading of PR *** are economically compensated for their PR *** models of dispatchable generators and flexible load aggregators in the joint market are *** solve the market problem in polynomial time,a distributed market clearing method is developed based on the ADMM *** joint market is tested on a modified IEEE 33-bus *** verifies that introducing the PR market can encourage flexible loads to provide more PR service to accommodate the net load *** such,the ramping cost of dispatchable generators is reduced by 29.09%in the test *** planned energy curtailment from REG is also *** computational efficiency of the proposed distributed clearing method is validated by comparing it with a centralized method.

关键词： Distributed market clearing flexible load aggregator local electricity market planned ramping product renewable energy generation

Corrosion characteristics of single-phase Mg-3Zn alloy thin film for biodegradable electronics

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2023年第9期11卷 3241-3254页

作者： Ji-Woo Gu Jae-Young Bae Guangzhe Li Hae Won Hwang So-Hyeon Lee sung-Geun Choi Ju-Young Kim Myoung-Ryul ok Yu-Chan Kim Seung-Kyun Kang Department of Materials Science and Engineering Seoul National University(SNU)Seoul 08826Republic of Korea Research Institute of Advanced Materials(RIAM) Seoul National UniversitySeoul 08826Republic of Korea Soft Foundry Nano Systems Institute(NSI) Seoul National UniversitySeoul 08826Republic of Korea Biomaterials Research Center Biomedical Research DivisionKorea Institute of Science and Technology(KIST)Seoul 34141Republic of Korea Division of Bio-Medical Science and Technology KIST SchoolKorea University of Science and TechnologySeoul 02792Republic of Korea Department of Materials Science and Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea

Biodegradable metals as electrodes, interconnectors, and device conductors are essential components in the emergence of transient electronics, either for passive implants or active electronic devices, especially in the fields of biomedical electronics. Magnesium and its alloys are strong candidates for biodegradable and implantable conducting materials because of their high conductivity and biocompatibility, in addition to their well-understood dissolution behavior. One critical drawback of Mg and its alloys is their considerably high dissolution rates originating from their low anodic potential, which disturbs the compatibility to biomedical applications. Herein, we introduce a single-phase thin film of a Mg-Zn binary alloy formed by sputtering, which enhances the corrosion resistance of the device electrode, and verify its applicability in biodegradable electronics. The formation of a homogeneous solid solution of single-phase Mg-3Zn was confirmed through X-ray diffraction and transmission electron microscopy. In addition, the dissolution behavior and chemistry was also investigated in various biological fluids by considering the effect of different ion species. Micro-tensile tests showed that the Mg-3Zn alloy electrode exhibited an enhanced yield strain and elongation in relation to a pure Mg electrode. Cell viability test revealed the high biocompatibility rate of the Mg-3Zn binary alloy thin film. Finally, the fabrication of a wireless heater demonstrated the integrability of biodegradable electrodes and highlighted the ability to prolong the lifecycle of thermotherapy-relevant electronics by enhancing the dissolution resistance of the Mg alloy.

关键词： Biodegradable alloy Mg-3Zn binary alloy Solid-solution thin film electrode Biodegradable conductor Transient electronics

Prediction of Typhoon Tracks Using Dynamic Linear Models

在线全文

学校读者我要写书评

暂无评论

Advances in Atmospheric Sciences 2003年第3期20卷 379-384页

作者： Keon-Tae sohn H.Joe KWON Ae-Sook SUH Pusan KongjuMeteorological Research Institute//KMA National UniversityPusan609-735KoreaNational UniversityKonju314-701KoreaSeoul156-010Korea

This paper presents a study on the statistical forecasts of typhoon tracks. Numerical models have their own systematic errors, like a bias. In order to improve the accuracy of track forecasting, a statistical model called DLM (dynamic linear model) is applied to remove the systematic error. In the analysis of typhoons occurring over the western North Pacific in 1997 and 2000, DLM is useful as an adaptive model for the prediction of typhoon tracks.

关键词： typhoon track forecast systematic error dynamic linear model

Recovery of gait and injured corticoreticulospinal tracts in a patient with diffuse axonal injury

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2021年第5期16卷 924-925页

作者： sung Ho Jang You sung Seo Department of Physical Medicine and Rehabilitation College of MedicineYeungnam UniversityDaeguRepublic of Korea

Diffuse axonal injury(DAI)is defined as the presence of microscopic axonal damage in the white matter of the brain produced by mechanical forces and is characterized histologically by widespread damage to axons(Maxwell et al.,1997).Diffusion tensor imaging(DTI)allows evaluation of the integrity of the white matter of brain to be determined by virtue of its ability to image water diffusion characteristics(Basser et al.,1994).

关键词： axonal al. damage

Pathology and molecular characterization of recent Leucocytozoon caulleryi cases in layer flocks

在线全文

学校读者我要写书评

暂无评论

The Journal of Biomedical Research 2016年第6期30卷 517-524页

作者： Hae Rim Lee Bon-Sang Koo Eun-ok Jeon Moo-sung Han Kyung-Cheol Min Seung Baek Lee Yeonji Bae In-Pil Mo Avian Disease Laboratory College of Veterinary MedicineChungbuk National University Division of Basic Research Bureau of Ecological ResearchNational Institute of Ecology

Leucocytozoonosis was found in three layer farms in chickens with suspected fatty liver or fatty liver hemorrhagic syndrome in Korea between 2009 and *** layer chicken flocks showed both mortality and decreased egg production for one or two weeks when they were between 59 and 82 weeks *** the necropsy,the most prominent gross lesions were found in the liver,which was enlarged,had a fragile texture,exhibited yellowish discolorations,and had various hemorrhagic *** reactions associated with megaloschizonts specific for Leucocytozoon caulleryi were prominent upon microscopic examination of the liver without significant *** addition,the ovaries and uterus were the most affected organs for Leucocytozoon caulleryi multiplication,which led to decreased egg *** studies with formalin-fixed,paraffin-embedded tissues were performed in search of a partial region of the cytochrome b gene for hemosporidian *** on these results,the causal agent was determined to be closely related to Leucocytozoon caulleryi reported in Japan and *** this study,we describe recently re-occurring leucocytozoonosis in layer chickens,which required histopathology for disease *** prevent outbreaks and maintain chicken health and egg production,layer chickens need to be monitored for symptoms of leucocytozoonosis.

关键词： chicken leucocytozoonosis Leucocytozoon caulleryi layer chicken flocks histopathology megaloschizont

Case Report:Congenital atresia of the left main coronary artery in an infant

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science B(Biomedicine & Biotechnology) 2010年第7期11卷 539-541页

作者： Su Ye sohn Gi Young JANG Byung Min CHOI Department of Pediatrics Korea University Hospital

Congenital atresia of the left main coronary artery is a rare occurrence, and surgical revascularizationbypass graft is required. We here report a rare case of congenital coronary anomaly in an infant. A lO-month-old male infant was admitted to the hospital with heart failure symptoms. Echocardiographic examinations revealed mitral valve regurgitation and ischemic changes of the anterolateral atresia of the left main coronary artery with a severe papillary muscle and chordae. Coronary angiography showed hypoplastic left anterior descending artery and a circumflex coronary artery. Unfortunately, sudden cardiac arrest occurred after catheterization and the infant did not recover despite of immediate cardiopulmonary resuscitation. Further studies are needed to find a newer diagnostic method to detect coronary anomaly in an infant, and coronary angiography, if necessary, has to be performed very carefully.

关键词： Conqenital heart disease Anomalous coronaries Infant

Formulation of Reduction Rate for Ultimate Compressive Strength of Stiffened Panel Induced by Opening

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2014年第4期28卷 557-568页

作者：于昌利 LEE Joo-sung School of Naval Architecture and Ocean Engineering Harbin Institute of Technology School of Naval Architecture and Ocean Engineering University of Ulsan

The main objective of this study is to numerically investigate the characteristics of ultimate compressive strength of stiffened panels with opening and also to fit the design-oriented formulae. For this purpose, three series of well executed experimental data on longitudinally stiffened steel plates with and without opening subjected to the uniform axial in-pane load which is carried out to study the buckling and post-buckling up to the final failure are chosen. Also, a nonlinear finite element method capable of efficiently analyzing the large elasto-plastic deflection behavior of stiffened panels is developed and used for simulation. The feasibility of the present simulation process is confirmed by a good agreement with the experimental results. More case studies are developed employing the simulation process to analyze the influence of various design variables on the reduction rate of ultimate strength of stiffened panel induced by opening. Based on the computed results, two design formulae are fitted and the accuracy of design formulae is studied. Furthermore, the viability of the design formulae for practical engineering is proved.

关键词： stiffened panel opening reduction rate non-linear analysis formulae fitting