检索结果-南通市图书馆

Unraveling the Harmonious Coexistence of Ruthenium States on a Self-Standing Electrode for Enhanced Hydrogen Evolution Reaction

在线全文

学校读者我要写书评

暂无评论

ENERGY & ENVIRONMENTAL MATERIALS 2024年第6期7卷 303-311页

作者： Ma, Joonhee Cho, Jin Hyuk lee, Chaehyeon Kang, Moon sung Choi, sungkyun Jang, Ho Won Ahn, Sang Hyun Back, Seoin Kim, soo Young Korea Univ Dept Mat Sci & Engn Seoul 02841 South Korea Sogang Univ Inst Emergent Mat Dept Chem & Biomol Engn Seoul 04107 South Korea Pusan Natl Univ Coll Nanosci & Nanotechnol Dept Cogno Mechatron Engn Busan 46241 South Korea Seoul Natl Univ Res Inst Adv Mat Dept Mat Sci & Engn Seoul 08826 South Korea Chung Ang Univ Sch Chem Engn & Mat Sci Seoul 06974 South Korea

The development of cost-effective, highly efficient, and durable electrocatalysts has been a paramount pursuit for advancing the hydrogen evolution reaction (HER). Herein, a simplified synthesis protocol was designed to achieve a self-standing electrode, composed of activated carbon paper embedded with Ru single-atom catalysts and Ru nanoclusters (ACP/RuSAC+C) via acid activation, immersion, and high-temperature pyrolysis. Ab initio molecular dynamics (AIMD) calculations are employed to gain a more profound understanding of the impact of acid activation on carbon paper. Furthermore, the coexistence states of the Ru atoms are confirmed via aberration-corrected scanning transmission electron microscopy (AC-STEM), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS). Experimental measurements and theoretical calculations reveal that introducing a Ru single-atom site adjacent to the Ru nanoclusters induces a synergistic effect, tuning the electronic structure and thereby significantly enhancing their catalytic performance. Notably, the ACP/RuSAC+C exhibits a remarkable turnover frequency (TOF) of 18 s-1 and an exceptional mass activity (MA) of 2.2 A mg-1, surpassing the performance of conventional Pt electrodes. The self-standing electrode, featuring harmoniously coexisting Ru states, stands out as a prospective choice for advancing HER catalysts, enhancing energy efficiency, productivity, and selectivity. A self-standing electrode with the coexistence of Ru single atoms and Ru nanoclusters is designed for the hydrogen evolution reaction (HER). Additional acid activation process induces defects, anchoring more Ru ions on the substrate. Detailed experimental and computational investigations suggest that the electronic coupling effect between different Ru states significantly enhanced the overall HER performance. image

关键词： electrocatalysis electronic coupling effect hydrogen evolution reaction self-standing electrode CARBON ELECTROREDUCTION CATALYSTS PAPER

Intelligent structured nanocomposite adhesive for bioelectronics and soft robots

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 534-549页

作者： Yeon soo lee Min-Seok Kim Da Wan Kim Changhyun Pang School of Chemical Engineering Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Mechanical Metrology Group Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Department of Electronic Engineering Korea National University of TransportationChungbuk 27469Republic of Korea Samsung Advanced Institute for Health Sciences and Technology Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea

The remarkable functionality of biological systems in detecting and adapting to various environmental conditions has inspired the design of the latest electronics and robots with advanced *** review focuses on intelligent bio-inspired strategies for developing soft bioelectronics and robotics that can accommodate nanocomposite adhesives and integrate them into biological *** underlying principles of the material and structural design of nanocomposite adhesives were investigated for practical applications with excellent functionalities,such as soft skin-attachable health care sensors,highly stretchable adhesive electrodes,switchable adhesion,and untethered soft *** addition,we have discussed recent progress in the development of effective fabrication methods for micro/nanostructures for integration into devices,presenting the current challenges and prospects.

关键词： biomimetics bio-adhesive switchable adhesion bioelectronics nanocomposite soft robotics

Effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on tensile and bending properties of high-Al-containing Mg alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 779-793页

作者： Sumi Jo Gyo Myeong lee Jong Un lee Young Min Kim sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Magnesium Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on the uniaxial tensile and three-point bending properties of extruded Mg alloys containing high Al *** extruded Mg–9Al–1Zn–0.3Mn(AZ91)alloy contains lamellar-structured Mg_(17)Al_(12)discontinuous precipitates along the grain boundaries,which are formed via static precipitation during natural air *** extruded Mg–11Al–1Zn–0.3Mn(AZ111)alloy contains spherical Mg_(17)Al_(12)precipitates at the grain boundaries and inside the grains,which are formed via dynamic precipitation during *** to inhomogeneous distribution of precipitates,the AZ111 alloy consists of two different precipitate regions:precipitate-rich region with numerous precipitates and finer grains and precipitate-scarce region with a few precipitates and coarser *** AZ111 alloy exhibits a higher tensile strength than the AZ91 alloy because its smaller grain size and more abundant precipitates result in stronger grain-boundary hardening and precipitation hardening effects,***,the tensile elongation of the AZ111 alloy is lower than that of the AZ91 alloy because the weak cohesion between the dynamic precipitates and the matrix facilitates the crack initiation and *** bending,a macrocrack initiates on the outer surface of bending specimen in both *** AZ111 alloy exhibits higher bending yield strength and lower failure bending strain than the AZ91 *** bending specimens of the AZ91 alloy have similar bending formability,whereas those of the AZ111 alloy exhibit considerable differences in bending formability and crack propagation behavior,depending on the distribution and number density of precipitates in the *** bending specimens of the AZ111 alloy,it is found that the failure bending strain(ε_(f,bending))is inversely proportional to the area fraction of precipitates in the outer zone of bending specimen(A_(ppt)),with a relation

关键词： Mg–Al alloy Extrusion Bending Precipitation Microstructure

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 186-196页

作者： Sujeong Byun Jinyeong Yu Seho Cheon Seong Ho lee sung Hyuk Park Taekyung lee School of Mechanical Engineering Pusan National UniversityBusan 46241South Korea School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading *** characteristic results in a diverse range of flow curves that vary with a deformation *** study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data *** developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)*** proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset *** model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading *** GAN-aided GRU results were superior to those of previous ML models and constitutive *** superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for *** a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

关键词： Plastic anisotropy Compression Annealing Machine learning Data augmentation

Comparison of commercial silicon-based anode materials for the design of a high-energy lithium-ion battery

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5270-5277页

作者： Minhong Choi Eunhan lee Jaekyung sung Namhyung Kim Minseong Ko Division of Convergence Materials Engineering Pukyong National UniversityBusan 48547Republic of Korea Department of Materials Engineering and Convergence Technology Gyeongsang National University501 Jinju-daeroJinju 52828Republic of Korea Department of Materials System Engineering Pukyong National UniversityBusan 48547Republic of Korea

Silicon(Si)is considered a potential alternative anode for next-generation Li-ion batteries owing to its high theoretical capacity and ***,the commercial use of Si anodes is hindered by their large volume expansion(~300%).Numerous efforts have been made to address this *** these efforts,Si-graphite co-utilization has attracted attention as a reasonable alternative for high-energy anodes.A comparative study of representative commercial Si-based materials,such as Si nanoparticles,Si suboxides,and Si−Graphite composites(SiGC),was conducted to characterize their overall performance in high-energy lithium-ion battery(LIB)design by incorporating conventional ***-Si was found to exhibit poor electrochemical performance,with severe volume expansion during *** suboxide provided excellent cycling stability in a full-cell evaluation with stable volume variation after 50 cycles,but had a large irreversible capacity and remarkable volume expansion during the first *** displayed a good initial Coulombic efficiency and the lowest volume change in the first cycle owing to the uniformly distributed nano-Si layer on graphite;however,its long-term cycling stability was relatively *** complement each disadvantage of Si suboxide and SiGC,a new combination of these Si-based anodes was suggested and a reasonable improvement in overall battery performance was successfully achieved.

关键词： silicon-based anode high-energy comparison lithium ion battery blended electrode

RUFY4 deletion prevents pathological bone loss by blocking endo-lysosomal trafficking of osteoclasts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bone Research 2024年第2期12卷 407-420页

作者： Minhee Kim Jin Hee Park Miyeon Go Nawon lee Jeongin Seo Hana lee Doyong Kim Hyunil Ha Taesoo Kim Myeong Seon Jeong Suree Kim Taesoo Kim Han sung Kim Dongmin Kang Hyunbo Shim soo Young lee Department of Life Science Ewha Womans UniversitySeoul 03760South Korea The Research Center for Cellular Homeostasis Ewha Womans UniversitySeoul 03760South Korea Department of Biomedical Engineering Yonsei UniversityWonju 26493South Korea KM Convergence Research Division Korea Institute of Oriental MedicineDaejeon 34054South Korea Chuncheon Center Korea Basic Science InstituteChuncheon 24341South Korea Fluorescence Core Imaging Center and Bioimaging Data Curation Center Ewha Womans UniversitySeoul 03760South Korea Multitasking Macrophage Research Center Ewha Womans UniversitySeoul 03760South Korea

Mature osteoclasts degrade bone matrix by exocytosis of active proteases from secretory lysosomes through a ruffled ***,the molecular mechanisms underlying lysosomal trafficking and secretion in osteoclasts remain largely ***,we show with GeneChip analysis that RUN and FYVE domain-containing protein 4(RUFY4)is strongly upregulated during *** lacking Rufy4 exhibited a high trabecular bone mass phenotype with abnormalities in osteoclast function in ***,deleting Rufy4 did not affect osteoclast differentiation,but inhibited bone-resorbing activity due to disruption in the acidic maturation of secondary lysosomes,their trafficking to the membrane,and their secretion of cathepsin K into the extracellular ***,RUFY4 promotes late endosome-lysosome fusion by acting as an adaptor protein between Rab7 on late endosomes and LAMP2 on primary ***,Rufy4-deficient mice were highly protected from lipopolysaccharide-and ovariectomy-induced bone ***,RUFY4 plays as a new regulator in osteoclast activity by mediating endo-lysosomal trafficking and have a potential to be specific target for therapies against bone-loss diseases such as osteoporosis.

关键词： osteoclast inhibited traffic

Strengthening mechanisms analysis and tailoring of bimodal grain structures for enhanced strength in CoCrFeMnNi high-entropy alloys

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3893-3903页

作者： Jaesoung lee Seulgi Kim Taehyun Kwon Young II Kim Suyeon Kim sung Ho Song Bin lee Dongju lee Department of Urban Energyand Environmental EngineeringChungbuk National UniversityCheongju 28644Republic of Korea Division of Advanced Materials Engineering Kongju National UniversityChungnam 330-717Republic of Korea Department of Advanced Materials Engineering for Information and Electronics Integrated-Education Institute for Frontier Science and Technology(BK21 Four)Kyung Hee UniversityYongin17104Republic of Korea

The CoCrFeMnNi high-entropy alloys(HEAs)with a(face-centered cubic) FCC structure has garnered considerable attention for its exceptional ductility and strain hardening ***,its yield strength is insufficient for structural *** this study,strengthening mechanisms in these HEAs were investigated to gain insight into the mechanical properties according to alloy powder ***,we present a novel approach to achieve both high strength and high ductility through the creation of a bimodal structure consisting of both coarse and fine grains via gas atomization and spark plasma sintering processes.A bimodally structured HEA prepared with a mass ratio of 2:8 between coarse particles(75-106 μm) and fine particles(≤25 μm)yielded optimal results,with a strength of 491.95 MPa and elongation of 19.64%.This strength value represents an~41% increase compared with the sample that displayed a fine single microstructure(347.08 MPa for yield strength).The strength enhancement was attributed to the prevention of plastic deformation initiation from the fine particles during *** innovative approach to the creation of HEAs with bimodal structures shows promise for various applications,such as structural components that require a combination of high strength and high ductility.

关键词： High-entropy alloys CrCoFeMoNi Bimodal Gas atomization Mechanical properties

The Outcome of the Chemotherapy and Oncothermia for Far Advanced Adenocarcinoma of the Lung: Case Reports of Four Patients

在线全文

学校读者我要写书评

暂无评论

Advances in Lung Cancer 2015年第1期4卷 1-7页

作者： Doo Yun lee Joon Seok Park Hae Chul Jung Eun Seol Byun Seok Jin Haam sung soo lee Department of Thoracic Cardiovascular Surgery Bundang CHA Medical Center CHA University Kyunggido Korea Department of Thoracic Cardiovascular Surgery Gangnam Severance Hospital College of Medicine Yonsei University Seoul Korea

Lung cancer is one of the most aggressive and lethal form of cancers. Patients with far advanced lung cancer are treated by chemotherapy with or without radiotherapy. However, median survival of these patients is less than 6 months. To increase survival and quality of life for these patients, various forms of complementary treatments have been tried in clinical practices, and oncothermia is supposed to be one of the promising candidates. From May 2008 to November 2013, 4 patients with far advanced lung adenocarcinoma (stages IIIB and IV) were treated with oncothermia in addition to conventional chemotherapy at Gangnam Severance Hospital and Bundang CHA Hospital. All these patients have survived for more than 2 years.

关键词： Lung Cancer Chemotherapy

Evolution of nonmetallic inclusions in 80-t 9CrMoCoB large-scale ingots during electroslag remelting process

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1525-1539页

作者： Shengchao Duan Min Joo lee Yao Su Wangzhong Mu Dong soo Kim Joo Hyun Park School of Mechanical and Materials Engineering North China University of TechnologyBeijing 100144China Department of Materials Science and Chemical Engineering Hanyang UniversityAnsan 15588Rep.of Korea Department of Materials Science and Engineering KTH Royal Institute of TechnologyBrinellvägen 23Stockholm 10044Sweden Department of Engineering Science and Mathematics Division of Materials ScienceLuleåUniversity of Technology97187 LuleåSweden Casting&Forging Business Unit Nuclear Business GroupDoosan EnerbilityChangwon 51711Rep.of Korea

In combination with theoretical calculations,experiments were conducted to investigate the evolution behavior of nonmetallic inclusions(NMIs)during the manufacture of large-scale heat-resistant steel ingots using 9CrMoCoB heat-resistant steel and CaF_(2)–CaO–Al_(2)O_(3)–SiO_(2)–B_(2)O_(3)electroslag remelting(ESR)-type slag in an 80-t industrial ESR *** main types of NMI in the consumable electrode comprised pure alumina,a multiphase oxide consisting of an Al_(2)O_(3)core and liquid CaO–Al_(2)O_(3)–SiO_(2)–MnO shell,and M_(23)C_(6)carbides with an MnS *** Al_(2)O_(3)and MnS inclusions had higher precipitation temperatures than the M_(23)C_(6)-type carbide under equilibrium and nonequilibrium solidification ***,inclusions can act as nucleation sites for carbide layer *** ESR process completely removed the liquid CaO–Al_(2)O_(3)–SiO_(2)–MnO oxide and MnS inclusion with a carbide shell,and only the Al_(2)O_(3)inclusions and Al_(2)O_(3)core with a carbide shell occupied the remelted *** M_(23)C_(6)-type carbides in steel were determined as Cr_(23)C_(6)based on the analysis of transmission electron microscopy *** substitution of Cr with W,Fe,or/and Mo in the Cr_(23)C_(6)lattice caused slight changes in the lattice parameter of the Cr_(23)C_(6)***,Cr_(21.34)Fe_(1.66)C_(6),(Cr_(19)W_(4)C_(6),Cr_(18.4)Mo_(4.6)C_(6),and Cr_(16)Fe_(5)Mo_(2)C_(6)can match the fraction pattern of Cr_(23)C_(6)*** Al_(2)O_(3)inclusions in the remelted ingot formed due to the reduction of CaO,SiO_(2),and MnO components in the liquid *** increased Al content in liquid steel or the higher supersaturation degree of Al_(2)O_(3)precipitation in the remelted ingot than that in the electrode can be attributed to the evaporation of CaF_(2)and the increase in CaO content in the ESR-type slag.

关键词： nonmetallic inclusion heat-resistant steel electroslag remelting M_(23)C_(6) carbide MnS inclusion supersaturation degree