检索结果-南通市图书馆

Polysaccharide-based magnetically responsive polyelectrolyte hydrogels for tissue engineering applications

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2018年第8期34卷 1371-1377页

作者： Kummara Madhusudana Rao Anuj Kumar sung soo Han School of Chemical Engineering Yeungnam University Department of Nano Medical and Polymer MaterialsYeungnam University

Polysaccharide-based bionanocomposite hydrogels with functional nanomaterials were used in biomed- ical applications. Self-organization of xanthan gum and chitosan in the presence of iron oxide magnetic nanoparticles （Fe304 MNPs） allowed us to form magnetically responsive polyelectrolyte complex hydro- gels （MPECHs） via insitu ionic complexation using D-（＋）-glucuronic acid ^-lactone as a green acidifying agent. Characterization confirmed the successful formation of （and structural interactions within） the MPECH and good porous structure. The rheological behavior and compressive properties of the PECH and MPECH were measured. The results indicated that the incorporation of Fe304 MNPs into the PECH greatly improved mechanical properties and storage modulus （G＇）. In vitro cell culture of NIH3T3 fibroblasts on MPECHs showed improvements in cell proliferation and adhesion in an external magnetic field relative to the pristine PECH. The results showed that the newly developed MPECH could potentially be used as a magnetically stimulated system in tissue engineering applications.

关键词： Magnetic nanoparticles Bionanocomposite HydrogelsCell proliferation AdhesionTissue engineering

Electrodeposition behavior and characteristics of Ni-carbon nanotube composite coatings

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 68-72页

作者： sung-Kyu kim Tae-sung OH Department of Materials Science and Engineering Hongik University

Ni-CNT (carbon nanotube) composite coatings were processed by electrodeposition and their hardness and corrosion characteristics were investigated with variations of CNT concentration in an electrolyte solution and electrodeposition current density. With increasing the CNT concentration in the electrodeposition bath and the current density, more CNTs are incorporated into Ni matrix. Hardness values of the Ni-CNT coatings are irrelevant to the CNT concentration in the solution, the current density, and current mode, implying poor adhesion of CNTs to Ni matrix. With increasing the CNT content in the coating, the corrosion resistance of the Ni-CNT composite coating becomes inferior due to the porous microstructure.

关键词： composite coating carbon nanotube electrodeposition

QKD system with fast active optical path length compensation

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2017年第6期60卷 1-7页

作者： Byung Kwon Park Min soo Lee Min Ki Woo Yong-Su kim Sang-Wook Han sung Moon Center for Quantum Information Korea Institute of Science and Technology Department of Nano-materials Science and Engineering Korea University of Science and Technology

We develop a quantum key distribution (QKD) system with fast active optical path length compensation. A rapid and reliable active optical path length compensation scheme is proposed and applied to a plug-and-play QKD system. The system monitors changes in key rates and controls it is own operation automatically. The system achieves its optimal performance within three seconds of operation, which includes a sifted key rate of 5.5 kbps and a quantum bit error rate of less than 2% after an abrupt temperature variation along the 25 km quantum channel. The system also operates well over a 24 h period while completing more than 60 active optical path length compensations.

关键词： quantum key distribution optical path length compensation plug and play field programmable gate array

Dynamic recrystallization behavior and microstructural evolution of Mg alloy AZ31 through high-speed rolling

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2018年第10期34卷 1747-1755页

作者： Jeong Hun Lee Jong Un Lee Sang-Hoon kim Seok Weon Song Chong soo Lee sung Hyuk Park Ulsan Regional Division Korea Institute of Industrial Technology School of Materials Science and Engineering Kyungpook National University Technical Research Laboratories POSCO Graduate Institute of Ferrous Technology Pohang University of Science and Technology

High-speed rolling （HSR） is known to improve the workability of Mg alloys significantly, which makes it possible to impose a large reduction in a single pass without fracture. In the present study, dynamic recrystallization （DRX） behavior and microstructural and textural variations of Mg alloy AZ31 dur-ing a HSR process were investigated by conducting rolling with different imposed reductions in the range of 20%-80% at a high rolling speed of 470 m/min and 400℃. High-strain-rate deformation during HSR suppresses dislocation slips but promotes twinning, which results in the formation of numer-ous twins of several types, i.e., {10-12} extension twins, {10-11} and {10-13} contraction twins, and {10-11}-{10-12} double twins. After twinning, high strain energy is accumulated in twin bands because their crystallographic orientations are favorable for basal slips, leading to subsequent DRX at the twin bands. Accordingly, twinning activation and twinning-induced DRX behavior play crucial roles in accommodating plastic deformation during HSR and in varying microstructure and texture of the high- speed-rolled （HSRed） sheets. Area fraction of fine DRXed grains formed at the twin bands increases with increasing rolling reduction, which is attributed to the combined effects of increased strain, strain rate, and deformation temperature and a decreased critical strain for DRX. Size, internal strain, and texture intensity of the DRXed grains are smaller than those of unDRXed grains. Therefore, as rolling reduction increases, average grain size, stored internal energy, microstructural inhomogeneity, and basal texture intensity of the HSRed sheets gradually decrease owing to an increase in the area fraction of the DRXed grains.

关键词： Magnesium alloy High-speed rolling Twinning Dynamic recrystallization Microstructure

Settling and dewatering characteristics of granulated methane-oxidizing bacteria

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2013年第2期25卷 280-286页

作者： Kwang Ho Ahn Kwang soo kim sung Won Kang Chul Yong Um Won Tae Lee Kwang Baik Ko Korea Institute of Construction Technology 283Goyangdae-RoIlsanseo-GuGoyang-SiGyeonggi-Do 411-712Korea School of Civil and Environmental Engineering Yonsei UniversitySinchondong 134SudaemunguSeoul 120-749Korea School of Civil and Environmental Engineering Kumoh National Institute of TechnologyDaehak-ro 61GumiGyeongbuk 730-701Korea

We evaluated the settling ability and dewaterability of granulated methane-oxidizing bacteria （GMOB） after granulation using a continuous-flow reactor. A comparative analysis on settling and dewatering characteristics due to changes in sludge retention time （SRT, 10, 15 and 20 days） during cultivation of GMOB was conducted. In assessing dewaterability, the specific resistance to filtration （SRF） of activated sludge and GMOB was found to be 8.21×1013-2.38×1014 and 4.88 × 1012-1.98×1013 m/kg, respectively. It was confirmed that as SRT decreased, SRF of GMOB increased. In the case of bound extracellular polymeric substance （EPS）, activated sludge registered 147.5 mg/g-VSS while GMOB exhibited 171-177.2 mg/g-VSS. In the case of extracellular polymeric substance soluble EPS in effluent, activated sludge measured 62 mg/L and GMOB had 17.4-21.4 mg/L. The particle size analysis showed that mean particle diameters of GMOB were 402, 369, and 350 μm, respectively, at SRTs of 20, 15 and 10 days. In addition, it was found that GMOB had a larger mean particle diameter and exhibited much better settleability and dewaterability than activated sludge did.

关键词： methane-oxidizing bacteria dewaterability specific resistance to filtration extracellular polymeric substances

Supersonic Cavity Based Combustion with Kerosene/Hydrogen Fuel

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2015年第2期24卷 164-172页

作者： Rajarshi Das Jeong soo kim Heuy Dong kim Department of Mechanical Engineering Andong National University School of Mechanical Engineering Pukyong National University

A comparative study with kerosene and hydrogen fuel in a model scramjet combustor has been carried out nu- merically. The effect of fuel-air equivalence ratio on the flow field properties in a cavity based mixing mechanism at a freestream Math number of 2.08 has been probed. The investigation has been carried out in a two dimension- al numerical model where a cavity of length to depth ratio of 2 is mounted on one of the walls of the flow channel The flow field shock structure is observed to change with the change in fuel-air equivalence ratio. Total pressure loss is observed to depend both on fuel air equivalence ratio and the fuel type. The spread of fuel in the test sec- tion shows marked variation with the equivalence ratio. Performance of injector location on the fuel-air mixing is also probed during the course of the investigation.

关键词： Scramjet fuel-air mixing kerosene hydrogen equivalence ratio

Influence of tool plunge depth and welding distance on friction stir lap welding of AA5454-O aluminum alloy plates with different thicknesses

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 624-628页

作者： Jun-Won KWON Myoung-soo KANG sung-Ook YOON Yong-Jai KWON sung-Tae HONG Dae-Il kim Kwang-Hak LEE Jong-Dock SEO Jin-soo MOON Kyung-Sik HAN School of Materials Science and Engineering University of Ulsan School of Mechanical Engineering University of Ulsan Technical Research Laboratories Shin Young Co.Ltd. Automotive Parts Innovation Center Ulsan Technopark

AA5454-O aluminum alloy plates with thicknesses of 1.4 and 1.0 mm were friction-stir-lap-welded (FSLWed).The influences of the tool plunge depth and welding distance on surface appearance,macrostructure and mechanical properties of the FSLWed plates were experimentally *** tensile shear load of the FSLWed plates was compared with that of the adhesive-bonded ***-free FSLWed zones were successfully obtained in all the tool plunge depths and the welding *** FSLWed zones exhibited the relatively smooth surface *** all the FSLWed conditions,the FSLWed zone exhibited higher average hardness than the base *** addition,the upper plate exhibited a higher average hardness than the lower plate,although there was no special tendency in spite of the change in the tool plunge depth and the welding *** maximum tensile shear load of the FSLWed plates was much higher than that of the adhesive-bonded aluminum alloy ***,under the FSLW condition of the plunge depth of 1.8 mm and the welding distance of 40 mm,the tensile shear load of the FSLWed plate reached a level about 41% greater than that of the adhesive-bonded aluminum alloy *** addition,the maximum tensile shear load of the FSLWed plate was increased with the increase of the welding distance.

关键词： friction stir lap welding AA5450-O aluminum alloy tool plunge depth welding distance mechanical properties

Some Theorems on Leibniz n-Algebras from the Category U_(n)(Lb)

在线全文

学校读者我要写书评

暂无评论

Algebra Colloquium 2021年第1期28卷 155-168页

作者： Min soo kim Rustam Turdibaev Vanderbilt University NashvilleTN 37235USA V.I.Romanovskiy Institute of Mathematics Uzbekistan Academy of SciencesUniversity Street 4bTashkent 100174Uzbekistan AKFA University 1st Deadlock 10Kukcha DarvozaTashkent 100095Uzbekistan

We study the Leibniz n-algebra U_(n)(L),whose multiplication is defined via the bracket of a Leibniz algebra L as[x1,…,xn]=[x1,[…,[xn−2,[xn−1,xn]]…]].We show that U_(n)(L)is simple if and only if L is a simple Lie *** analog of Levi's theorem for Leibniz algebras in U_(n)(Lb)is established and it is proven that the Leibniz n-kernel of U_(n)(L)for any semisimple Leibniz algebra L is the n-algebra U_(n)(L).

关键词： Leibniz n-algebra Leibniz n-kernel simple Leibniz n-algebra Levi decomposition

SYNTHESIS AND CHARACTERIZATION OF HYDROPHOBIC-HYDROPHILIC MULTIBLOCK COPOLYMERS FOR BIOMEDICAL APPLICATIONS

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 1999年第2期17卷 113-122页

作者： Yong Kiel sung Yong Joo kim sung Wan kim Department of Chemistry College of Natural Science Dongguk University 3Ga 26 PhildongJunggu Seoul 100-715 KoreaReliability Technology Division NITQ 2 Chungangdong Kwachoncity Kyunggido 427-010 KoreaCenter for Controlled Chemical Delivery University of Utah Salt Lake City Utah 84112 U. S. A.

The synthesis and characterization of amphiphilic copolymers of poly（dimethyl siloxane）(PDMS),poly（ethylene oxide）(PEO), and heparin（Hep） were investigated. These multiblock copolymers wereidentified using;H-NMR, FTIR, end group analysis, and sulfur elemental analysis. The multiblockcopolymers were characterized by using DSC and X-ray diffractometry. The glass transition temperature,crystalline melting characteristics, annealing effect, and cold crystallization of the block copolymers weredetermined by DSC. The crystallinity of the block copolymers was also determined by X-ray diffractionmethod.

关键词： Heparinized block copolymer Biomedical polymer Synthesis Characterization