检索结果-南通市图书馆

Discrete Element Modeling of Asphalt Concrete Cracking Using a User-def ined Three-dimensional Micromechanical Approach

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2011年第6期26卷 1215-1221页

作者：陈俊 College of civil and Transportation engineering Hohai University

We established a user-defined micromechanical model using discrete element method （DEM） to investigate the cracking behavior of asphalt concrete （AC）. Using the ＂Fish＂ language provided in the particle flow code in 3.Demensions （PFC3.）, the air voids and mastics in asphalt concrete were realistically built as two distinct phases. With the irregular shape of individual aggregate particles modeled using a clump of spheres of different sizes, the three-dimensional （3.） discrete element model was able to account for aggregate gradation and fraction. Laboratory uniaxial complex modulus test and indirect tensile strength test were performed to obtain input material parameters for the numerical simulation. A set of the indirect tensile test were simulated to study the cracking behavior of AC at two levels of temperature, i e, -10 ℃ and 15 ℃. The predicted results of the numerical simulation were compared with laboratory experimental measurements. Results show that the 3. DEM model is able to predict accurately the fracture pattern of different asphalt mixtures. Based on the DEM model, the effects of air void content and aggregate volumetric fraction on the cracking behavior of asphalt concrete were evaluated.

关键词： discrete element method asphalt concrete cracking behavior three-dimensional simulation micromechanics

Interfacial Microstructure and Properties of Ti(C, N)/Ni Bonded by Transient Liquid-phase Diffusion

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2009年第3期24卷 432-439页

作者：周世权熊惟皓 school of Mechanical Science and engineering Huazhong University of Science and Technology Department of Mechanical engineering University of Waterloo school of Materials Science and engineering Huazhong University of Science and Technology

Effects of the main process parameters（temperature and time） on microstructure and properties of Ti（C, N）/Ni interface bonded by （Cu＋Nb） interlayer in a vacuum diffusion bonding device were investigated. The interfacial microstructures consisted initially of Ni3.b metallic compound and eutectic of Ni3.b ＋ CuNiss, and finally transformed to （Ti, Nb）（C, N）＋Ni3.b near Ti （C, N） and NiCuss ＋ Ni3.b near Ni when diffusion bonding temperature was 1 523.1 573.K. It was clear that Cu was a constituent in the transient liquid phase （TLP） into which Ni was dissolved by forming Cu-Ni transition liquid. Nb was dissolved in Cu-Ni transition liquid rapidly. Ti （C, N） conld be wetted by resultant Ni-Nb-Cu transient liquid phase which was followed by a little （Ti, Nb）（C, N） solid solution formed at interface. This increased the interface combining capability. Ultimately the interface shear strength was able to reach 140 MPa. The theoretle analysis and experimental results show that the growth of interfacial reaction layer Ni3.b accords with parabola law, and the activation energy of diffusion reaction is 115.0±0.5 kJ/mol, while the diffusion reaction speed constant is 12.53.mm/s^1/2.

关键词： vacuum diffusion bonding transient liquid phase (TLP) diffusion bonding interlayer activation energy

Development and Application of High Performance X80 Line Pipe for the 2^(nd) West-East Gas Pipeline

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2011年第S1期18卷 39-48页

作者： LI He-lin 1 , HUO Chun-yong 1 , JI Ling-kang 1, 2 , LI Yang 1, 3.(1. CNPC Tubular Goods Research Institute, Xi’an 710065, China 2. . school of Material Science and engineering, Xi’an Jiaotong University, Xi’an 710049, China 3. school of Material Science and engineering, University of Science and Technology Beijing, Beijing 100083. China) CNPC Tubular Goods Res Inst Xian 710065 Peoples R China Xi An Jiao Tong Univ Sch Mat Sci & Engn Xian 710049 Peoples R China Univ Sci & Technol Beijing Sch Mat Sci & Engn Beijing 100083 Peoples R China

It is the development tendency of gas pipeline to improve strength of line pipe and transmission pressure, which is an important symbol of the progress of gas pipeline technology. The 2nd West-East Gas Pipeline (the 2 nd WEGP) is the largest-scale X80 high pressure gas pipeline project in the world. Through the joint development project by Pipeline Company, research institute, and steel company, a series of achievements of technology have been obtained, which makes it possible to apply pressure of 12 MPa and X80 LSAW and HSAW pipe for the 2 nd WEGP. Specifications of X80 steel and pipe have been issued based on API 5L. High performance X80 steel and pipe have been developed and meets the Specification. General design conception of applying HSAW pipe and LSAW pipe on gas transmission trunk line with large diameter and high pressure has been established. Failure control of the 2 nd WEGP has been carried out to avoid failure and reduce the lost which based on analysis of pipeline failure mode. In this paper, research and development of high performance X80 welded pipe, establishment of technical route of joint application of HSAW and LSAW steel pipe and key technology of failure control are emphatically discussed.

关键词： 2 nd WEGP acicular ferrite failure control arrest toughness strain-based design

New Solution to Surface Temperature of Casting Slab Measurement Based on Preceded Reflector and Multi-Wavelength

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2012年第8期19卷 12-16页

作者： LIU Jun1, MA Jiao-cheng2, YANG Feng3. XIAO Hui1, RAO Li-min1 (1. school of Nuclear engineering and Technology, East China Institute of Technology, Fuzhou 3.4000, Jiangxi, China 2. school of Mechanical engineering and Automation, Northeastern University, Shenyang 110004, Liaoning, China 3. school of civil and Environmental engineering, East China Institute of Technology, Fuzhou 3.4000, Jiangxi, China) [a] school of Nuclear engineering and Technology East China Institute of Technology Fuzhou 344000 Jiangxi China [b] school of Mechanical engineering and Automation Northeastern University Shenyang 110004 Liaoning China [c] school of civil and Environmental engineering East China Institute of Technology Fuzhou 344000 Jiangxi China

The surface temperature of casting slab is an important parameter in the metallurgy field. Because the surface emissivity is uncertain and also unknown, it is difficult to measure the slab surface temperature accurately. A method based on preceded reflector and multi-wavelength was put forward to deal with the difficulty in surface temperature measurement of casting slab. On the premise of preceded reflector and non-preceded reflector, the method establishes the radiation energy equations and works out the emissivity and temperature in the equations. Also, the multilayer modeling of casting slab surface and multiple reflection-absorption process modeling were built by Monte Carlo method. The temperature measuring method had been applied in the continuous casting field. In order to verify the measured result, the thermal imaging method was adopted when the slab surface emissivity was set by repeated tests. Finally, the measured and verified temperature curves keep a same tendency and the error of the values is lower than 5℃. The comparison result shows that the method can measure temperature accurately.

关键词： casting slab emissivity surface temperature preceded reflector multi-wavelength

Preparation of CuO-CoO-MnO/SiO_2 Nanocomposite Aerogels as Catalyst Carriers and Their Application in the Synthesis of Diphenyl Carbonate

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2011年第4期26卷 595-599页

作者：赵越卿 school of Light Industry Hebei United University

CuO-CoO-MnO/SiO2 nanocomposite aerogels were prepared by using tetraethyl orthosilicate （TEOS） as Si source, and aqueous solution of Cu, Co and Mn acetates as transition metal sources via sol-gel process and supercritical drying （SCD） technique. The effect of synthesis conditions on gelation was investigated. Moreover, the composition of the CuO-CoO-MnO/SiO2 nanocomposite aerogels was characterized by electron dispersive spectroscopy （EDS） and X-ray photoelectron spectroscopy （XPS）, and the specific surface area of the nanocomposite aerogels was determined by the Brunauer-Emmett-Teller （BET） method. Diphenyl carbonate （DPC） as the product was analyzed by gas chromatography （GC）. The experimental results show that the range of optimal temperature for gelation is 3.-45 ℃, and the pH is 3.0-4.5. CuO-CoO-MnO/SiO2 nanocomposite aerogels are porous with a specific surface area of 3.4.9-700.6 m2/g. Compared to CO2 SCD, ethanol SCD is even favorable to the formation of aerogel with high specific surface area. The transition metals content in the nanocomposite aerogels can be controlled to be 0.71at%-13.77at%. With CuO-CoO-MnO/SiO2 nanocomposite aerogels as catalyst carrier, the yield of DPC is in direct proportion to the atomic fraction of transition metals in the nanocomposite aerogels, and it is up to 26.3. mass%, which is much higher than that via other porous carriers.

关键词： composite aerogel preparation catalyst carrier diphenyl carbonate

Adsorption of surfactants onto acrylic ester resins with different pore size distribution

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2006年第5期49卷 445-453页

作者： YANG Weiben1,2,3.LI Aimin1,3.CAI Jianguo1,3.MENG Guanhua1,3.& ZHANG Quanxing1,3.1. State Key Laboratory of Pollution Control and Resource Reuse,school of the Environment,Nanjing University,Nanjing 210093.China 2. Nanjing College of Chemical Technology,Nanjing 210048,China 3. Jiangsu engineering & Technology Research Center for Organic Toxicant Control and Resource Reuse,Nanjing 21003.,China 1. State Key Laboratory of Pollution Control and Resource Reuse School of the Environment Nanjing University Nanjing 210093 China 2. Nanjing College of Chemical Technology Nanjing 210048 China 3. Jiangsu engineering & Technology Research Center for Organic Toxicant Control and Resource Reuse Nanjing 210038 China

In this study, a series of acrylic ester resins with different pore size distribution were prepared successfully by varying the type and the amount of pore-forming agents. In order to inves-tigate the adsorption behavior and mechanism of surfactants on acrylic ester resins, three kinds of surfactants were utilized as adsorbates that were sodium 6-dodecyl benzenesulfonate (6-NaDBS), sodium 1-dodecyl benzene sulfonate (1-NaDBS) and sodium 1-dodecyl sulfonate, respectively. It was observed that the surface area was available in a particular pore size and an appropriate pore size of resins appeared to be more important for the adsorption of surfactants. As compared to commercial acrylic ester resins XAD-7 and HP2MG, 50# and 3.# resins exhibited more excellent adsorption properties toward 1-NaDBS and 6-NaDBS. The experimental equilibrium data were fitted to the Langmuir, and double-Langmuir models. Two models provided very good fittings for all resins over the temperature range studied. The investigation indicated that electrostatic attraction and hydrogen bond between resins and surfactants were the main forces and had an obvious effect on adsorption proc-ess.

关键词： acrylic ester resin, surfactant, adsorption, pore size distribution, isotherm.

A land surface model incorporated with soil freeze/thaw and its application in GAME/Tibet

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2006年第12期49卷 1311-1322页

作者： HU Heping1, YE Baisheng2, ZHOU Yuhua3.& TIAN Fuqiang1 1. Department of Hydraulic engineering, Tsinghua University, Beijing 100084, China 2. Cold and Arid Regions Environmental and engineering Research Institute, Chinese Academy of Sciences, Lanzhou 73.000, China 3. Department of civil engineering, Massachusetts Institute of Technology, USA 1. Department of Hydraulic engineering Tsinghua University Beijing 100084 China 2. Cold and Arid Regions Environmental and engineering Research Institute Chinese Academy of Sciences Lanzhou 730000 China 3. Department of civil engineering Massachusetts Institute of Technology USA

Land surface process is of great importance in global climate change, moisture and heat exchange in the interface of the earth and atmosphere, human impacts on the environment and eco- system, etc. Soil freeze/thaw plays an important role in cold land surface processes. In this work the diurnal freeze/thaw effects on energy partition in the context of GAME/Tibet are studied. A sophisti- cated land surface model is developed, the particular aspect of which is its physical consideration of soil freeze/thaw and vapor flux. The simultaneous water and heat transfer soil sub-model not only reflects the water flow from unfrozen zone to frozen fringe in freezing/thawing soil, but also demon- strates the change of moisture and temperature field induced by vapor flux from high temperature zone to low temperature zone, which makes the model applicable for various circumstances. The modified Picard numerical method is employed to help with the water balance and convergence of the numerical scheme. Finally, the model is applied to analyze the diurnal energy and water cycle char- acteristics over the Tibetan Plateau using the Game/Tibet datasets observed in May and July of 1998. Heat and energy transfer simulation shows that: (i) There exists a negative feedback mechanism between soil freeze/thaw and soil temperature/ground heat flux; (ii) during freezing period all three heat fluxes do not vary apparently, in spite of the fact that the negative soil temperature is higher than that not considering soil freeze; (iii) during thawing period, ground heat flux increases, and sensible heat flux decreases, but latent heat flux does not change much; and (iv) during freezing period, soil temperature decreases, though ground heat flux increases.

关键词： land surface model,soil freeze/thaw,GAME/Tibet,simultaneous liquid,vapor and heat transfer.

Electrical Breakdown Characteristic of Nanostructured W-Cu Contacts Materials

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2006年第4期21卷 32-35页

作者：王俊勃 school of Mechanical and Electrical engineering Xi'an Polytechnic UniversityXi'an 710048 ChinaSchool of Science Xi'an Jiaotong University Xi'an 710049China

Nanostructured （ NS ）W-Cu composite powder was prepared by mechanical alloying （ MA ）, and nanostructared bulk of W-Cu contact material was fabricated by hot press sintering in an electrical vacuum furnace. The rnicrostructure, electric conductivity, hardness and break down voltage of NS W- Cu alloys were measured and compared to those of conventional W-Cu alloys prepared by powder metallurg＇y. The experimental results show that microstructural refinement and uniformity can improve the breakdown behavior and the electric arc stability of nanostructared W- Cu contacts materials. Also, the wanostructured W- Cu contact material shows the characteristic of spreading electric arcs, which is of benefit to electric arc erosion.

关键词： nanostructured materials W-Cu alloy electrical breakdown

Analysis on cohesive crack opening displacement considering the strain softening effect

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2006年第1期49卷 88-101页

作者： WANG Limin1, XU Shilang2 & ZHAO Xiqiang3.1. Mechanics Department, Shandong University of Technology, Zibo 255049, China 2. civil engineering Department, Dalian University of Technology, Dalian 116024, China 3. Mathematics Department, Ocean University of China, Qingdao 266071, China Mechanics Department Shandong University of Technology Zibo 255049 China civil engineering Department Dalian University of Technology Dalian 116024 China Mathematics Department Ocean University of China Qingdao 266071 China

In order to investigate the crack propagation in quasi-brittle materials like rock, ceramic and concrete, Hillerborg and his co-researchers abstracted the fracture process zone in front of a stress free crack in terms of a “fictitious crack zone”. On the fictitious crack zone, cohesive stresses distribute following a given softening relationship of stress vs. crack opening. Based on the polynomial or power series expression of cohesive crack opening displacement, the relationship of the cohesive stress vs. the crack opening displacement is established using elastic theory and integral equation, and some unknown physics variables are obtained using variation approach. The calculation results gained in this paper are close to the experimentally test ones.

关键词： cohesive crack, softening, dissipation work, variation approach.