检索结果-南通市图书馆

study on thermal cycling ageing resistance of performances of polypropylene/elastomer/boron nitride nanocomposites for high voltage direct current cable insulation

在线全文

学校读者我要写书评

暂无评论

High Voltage 2024年第3期9卷 556-565页

作者： Jing Li Yu gao Zheng song baixin Liu Chenyi Guo Yu Chen Junguo gao boxue Du school of Electrical and Information Engineering Tianjin UniversityTianjinChina state Grid Tianjin Chengxi Electric Power supply branch TianjinChina state Key Laboratory of Electrical Insulation and Power Equipment Xi'an Jiaotong UniversityXi'anChina Key Laboratory of Engineering Dielectrics and Its Application Ministry of EducationHarbin University of Science and TechnologyHarbinChina

The influences of thermal cycling ageing on structures and insulation performances of polypropylene(PP)/elastomer/boron nitride(bN)nanocomposites are *** Melt blending method was used to prepare the nanocomposites,in which propylene-based elastomer(PbE)or ethylene-octene copolymer elastomer(EOC)was contained for ***,the samples were treated using a thermal cycling process with a temperature range from-30 to 150℃,and the number of thermal cycles was set from 0 to *** electron microscope(sEM),Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry and X-ray diffraction measurements were taken to facilitate the comprehension of structural ***,measurements were taken to assess the trap distribution and direct current(DC)breakdown strength of the *** obtained results revealed that following thermal cycling ageing,the morphology and crystallinity of PP/PbE/bN remained almost *** contrast,PP/EOC/bN exhibited substantial microstructural damage accompanied by a significant reduction in *** the number of thermal cycles increased,the trap level and DC breakdown strength of PP/PbE/bN were maintained at high levels,while those of PP/EOC/bN initially remained stable but then experienced a sharp *** is sug-gested that the addition of bN nanoparticles enhances the thermal cycling ageing resis-tance of the PP/PbE blend,whereas it weakens this resistance of the PP/EOC blend.

关键词： cycling resistance thermal

bayesian partial pooling to reduce uncertainty in overcoring rock stress estimation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第4期16卷 1192-1201页

作者： Yu Feng Ke gao suzanne Lacasse Norwegian Geotechnical Institute OsloNorway Department of Earth and space sciences Southern University of Science and TechnologyShenzhenChina

The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste *** one of the two IsRM suggested methods,the overcoring(OC)method is widely used to estimate the full stress tensors in rocks by independent regression analysis of the data from each OC ***,such customary independent analysis of individual OC tests,known as no pooling,is liable to yield unreliable test-specific stress estimates due to various uncertainty sources involved in the OC *** address this problem,a practical and no-cost solution is considered by incorporating into OC data analysis additional information implied within adjacent OC tests,which are usually available in OC measurement ***,this paper presents a bayesian partial pooling(hierarchical)model for combined analysis of adjacent OC *** performed five case studies using OC test data made at a nuclear waste repository research site of *** results demonstrate that partial pooling of adjacent OC tests indeed allows borrowing of information across adjacent tests,and yields improved stress tensor estimates with reduced uncertainties simultaneously for all individual tests than they are independently analysed as no pooling,particularly for those unreliable no pooling stress estimates.A further model comparison shows that the partial pooling model also gives better predictive performance,and thus confirms that the information borrowed across adjacent OC tests is relevant and effective.

关键词： Overcoring stress measurement Uncertainty reduction Partial pooling bayesian hierarchical model Nuclear waste repository

On the global smooth solutions of 3D incompressible Hall-MHD equations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics(A Journal of Chinese Universities) 2024年第2期39卷 319-327页

作者： YUE gao-cheng sUN Wen-da school of Mathematics Nanjing University of Aeronautics and AstronauticsNanjing 211106China

The present paper is devoted to the well-posedness issue for the 3D incompressible Hall-MHD system obtained from kinetic models. Our analysis strongly relies on the use of the Fourier analysis. We establish the global existence of smooth solutions for a class of large initial data, this result implies the initial velocity and magnetic field can be arbitrarily large.

关键词： 3D Hall-MHD well-posedness Fourier analysis

From concept to commercialization:A review of tubular solid oxide fuel cell technology

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第10期97卷 79-109,I0003页

作者： Ruyan Chen Yuan gao Jiutao gao Huiyu Zhang Martin Motola Muhammad bilal Hanif Cheng-Xin Li state Key Laboratory for Mechanical behavior of Materials School of Materials Science and EngineeringXi'an Jiaotong UniversityXi'anShaanxChina Department of Inorganic Chemistry Faculty of Natural SciencesComenius University Bratislava84215 BratislavaSlovakia

The reduced sealing difficulty of tubular solid oxide fuel cells(sOFCs)makes the stacking of tubular cell groups relatively easy,and the thermal stress constraints during stack operation are smaller,which helps the stack to operate stably for a long *** special design of tubular sOFC structures can completely solve the problem of high-temperature sealing,especially in the design of multiple single-cell series integrated into one tube,where each cell tube is equivalent to a small electric stack,with unique characteristics of high voltage and low current output,which can significantly reduce the ohmic polarization loss of tubular *** paper provides an overview of typical tubular sOFC structural designs both domestically and *** on the geometric structure of tubular sOFCs,they can be divided into bamboo tubes,bamboo flat tubes,single-section tubes,and single-section flat tube ***,this article provides an overview of commonly used materials and preparation methods for tubular sOFCs,including commonly used materials and preparation methods for support and functional layers,as well as a comparison of commonly used preparation methods for microtubule sOFCs,It introduced the three most important parts of building a fuel cell stack:manifold,current collector,and ceramic adhesive,and also provided a detailed introduction to the power generation systems of different tubular sOFCs,Finally,the development prospects of tubular sOFCs were discussed.

关键词： Tubular solid oxide fuel cell support material Geometric structure Preparation methods stack

Estimation and verification of green tide biomass based on UAV remote sensing

在线全文

学校读者我要写书评

暂无评论

Journal of Oceanology and Limnology 2024年第4期42卷 1216-1226页

作者： Xiaopeng JIANG Zhiqiang gao Zhicheng WANG CAs Key Laboratory of Coastal Environmental Processes and Ecological Remediation Yantai Institute of Coastal Zone ResearchChinese Academy of SciencesYantai 264003China shandong Key Laboratory of Coastal Environmental Processes Yantai Institute of Coastal Zone ResearchChinese Academy of SciencesYantai 264003China University of Chinese Academy of sciences Beijing 100049China

since 2007,the Yellow sea green tide has broken out every summer,causing great harm to the environment and *** satellite remote sensing(Rs)has been used in biomass research,there are several shortcomings,such as mixed pixels,atmospheric interference,and difficult field *** biomass of green tide has been lacking a high-precision estimation *** this study,high-resolution unmanned aerial vehicle(UAV)Rs was used to quantitatively map the biomass of green *** utilizing experimental data from previous studies,a robust relationship was established to link biomass to the red-green-blue floating algae index(RGb-FAI).Then,the lab-based model for green tide biomass from visible images taken by the UAV camera was developed and validated by field *** sults show that the accurate and cost-effective method is able to estimate the green tide biomass and its changes in given local waters of the near and far *** study provided an effective complement to the traditional satellite Rs,as well as high-precision quantitative techniques for decision-making in disaster management.

关键词： green tide biomass estimation quantitative technique Yellow sea unmanned aerial vehicle(UAV) remote sensing(Rs)

stability behavior of the Lanxi ancient flood control levee after reinforcement with upside-down hanging wells and grouting curtain

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain science 2024年第1期21卷 84-99页

作者： QIN Zipeng TIAN Yan gao siyuan ZHOU Jianfen HE Xiaohui HE Weizhong gao Jingquan school of Water Conservancy and Environment Engineering Zhejiang University of Water Resources and Electric PowerHangzhou 310018China Department of Civil Engineering Imperial College LondonLondonSW71BFEngland Lanxi Water Affairs bureau Lanxi 321102China Zhejiang Water Conservancy Engineering Consulting Co. LtdHangzhou 310051China

The stability of the ancient flood control levees is mainly influenced by water level fluctuations, groundwater concentration and rainfalls. This paper takes the Lanxi ancient levee as a research object to study the evolution laws of its seepage, displacement and stability before and after reinforcement with the upside-down hanging wells and grouting curtain through numerical simulation methods combined with experiments and observations. The study results indicate that the filled soil is less affected by water level fluctuations and groundwater concentration after reinforcement. A high groundwater level is detrimental to the levee's long-term stability, and the drainage issues need to be fully considered. The deformation of the reinforced levee is effectively controlled since the fill deformation is mainly borne by the upside-down hanging wells. The safety factors of the levee before reinforcement vary significantly with the water level. The minimum value of the safety factors is 0.886 during the water level decreasing period, indicating a very high risk of the instability. While it reached 1.478 after reinforcement, the stability of the ancient levee is improved by a large margin.

关键词： stability analysis Multiple factors Antiseepage reinforcement Upside-down hanging well Grouting curtain Ancient levee

A New Distribution Method for Wet steam Injection Optimization

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第1期20卷 109-126页

作者： Jingjing gao Xingkai Zhang Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering Yangtze UniversityWuhan434000China

A new approach and a new related distribution system are proposed to address the issue of uneven steam injection caused by the different suction capacities of the used wells during the application of steam“stimulation”methods for enhanced oil *** new distribution system consists of a swirler,spiral dividing baffles,and critical flow *** simulations are used to analyze the flow-field and degree of steam homogeneity obtained with such an *** results indicate that a higher inlet pressure leads to better ***,the internal flow field becomes more stable,and the deviation from an even distribution reduces to±4.0%even when the resistance of each branch is ***,field tests have yielded satisfactory results.

关键词： Cyclical steam stimulation homogeneous distribution gas-liquid two-phase flow critical flow nozzle

Cr-containing wastewater treatment based on Cr self-catalysis: a critical review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Environmental science & Engineering 2024年第1期18卷 1-22页

作者： Manshu Zhao Xinhua Wang shuguang Wang Mingming gao school of Environmental science and Engineering Shandong UniversityQingdao 266237China shandong Key Laboratory of Environmental Processes and Health Shandong UniversityQingdao 266237China shandong Key Laboratory of Water Pollution Control and Resource Reuse Shandong UniversityQingdao 266237China Weihai Research Institute of Industrial Technology of shandong University Weihai 264209China

Chromium (Cr), as a transition metal material with multiple redox states, has exhibited the catalysis toward Fenton-like reactions over a wide pH range. Although it is not sensible to add Cr reagents as catalysts due to its toxicity, it is highly promising to remediate Cr-containing wastewater through Cr-initiated advanced oxidation processes (Cr-initiated AOPs), which are clean and low-cost. Moreover, the widely concerned Cr-complexes, considered as obstacles in the remediation process, can be effectively destroyed by AOPs. Cr self-catalysis is defined as Cr species is both substrate and catalyst. However, the full understanding of Cr self-catalysis, including the generation of intermediates Cr(IV)/Cr(V), the synergetic effects with co-existing ions, and the accumulation of toxic Cr(VI), remains a challenge for the practical application of Cr-initiated AOPs. In this review, relevant researches on Cr self-catalysis during Cr-initiated AOPs are summarized. specifically, the Cr-Fenton-like reaction, Cr substituted materials, and Cr-sulfite reactions are explored as key mechanisms contributing to Cr self-catalysis. Moreover, Cr transformation processes, including synchronously Cr removal, Cr redox reactions, and Cr(VI) accumulation, in AOPs-based synergistic systems are systematically analyzed. Detailed approaches for the detection of active species in AOPs-based systems are also presented. The primary objective of this review is to explore the application of AOPs for Cr-containing wastewater remediation based on Cr self-catalysis, and provide fundamental insights and valuable information for future research on Cr-initiated AOPs.

关键词： self-catalysis Cr-initiated AOPs Cr transformation Cr intermediates Cr-containing wastewater

Device design principles and bioelectronic applications for flexible organic electrochemical transistors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第1期6卷 126-153页

作者： Lin gao Mengge Wu Xinge Yu Junsheng Yu state Key Laboratory of Electronic Thin Films and Integrated Devices School of Optoelectronic Science and EngineeringUniversity of Electronic Science and Technology of China(UESTC)Chengdu 610054People’s Republic of China Department of biomedical Engineering City University of Hong KongHong Kong Special Administrative Region of ChinaPeople’s Republic of China

Organic electrochemical transistors(OECTs) exhibit significant potential for applications in healthcare and human-machine interfaces, due to their tunable synthesis, facile deposition, and excellent biocompatibility. Expanding OECTs to the fexible devices will significantly facilitate stable contact with the skin and enable more possible bioelectronic applications. In this work,we summarize the device physics of fexible OECTs, aiming to offer a foundational understanding and guidelines for material selection and device architecture. Particular attention is paid to the advanced manufacturing approaches, including photolithography and printing techniques, which establish a robust foundation for the commercialization and large-scale fabrication. And abundantly demonstrated examples ranging from biosensors, artificial synapses/neurons, to bioinspired nervous systems are summarized to highlight the considerable prospects of smart healthcare. In the end, the challenges and opportunities are proposed for fexible OECTs. The purpose of this review is not only to elaborate on the basic design principles of fexible OECTs, but also to act as a roadmap for further exploration of wearable OECTs in advanced bio-applications.

关键词： flexible organic electrochemical transistors wearable bioelectronics manufacturing approaches device physics neuromorphic applications