检索结果-南通市图书馆

Effect of the interval between two shocks on ejecta formation from the grooved aluminum surface

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 147-159页

作者： Mingyang Xu Jianli Shao Weidong Song Enling tang School of Equipment Engineering Shenyang Ligong UniversityShenyang 110159China State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China

This work focuses on the effect of the interval between two shocks on the ejecta formation from the grooved aluminum(Al_(1100))surface by using smoothed particle hydrodynamics numerical *** unsupported shocks are obtained by the plate-impact between sample and two flyers at interval,with a peak pressure of approximately 30 GPa for each *** the shock interval varies from 2.11 to 7.67 times the groove depth,the bubble velocity reduces to a constant,and the micro jetting factor r_(J) from spike to bubble exhibits a non-monotonic change that decreases initially and then *** a shock interval of 3.6 times the groove depth,micro jetting factor r_(J) from spike to bubble reaches its minimum value of approximately ***,the micro jetting factor r_(F) from spike to free surface decreases linearly at first,and stabilizes around 0.25 once the shock interval surpasses 4.18 times the groove *** the shock interval is less than 4.18 times the groove depth,the unloading wave generated by the breakout of the first shock wave is superimpose with the unloading part of the second shock wave to form a large tensile area.

关键词： Ejecta Microjet Two shocks Interval Smoothed particle hydrodynamics

Photo-induced grease/oil switched lubricant for friction regulation

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第8期12卷 1696-1706页

作者： Zheng ZHANG Shuangxi tang Liran MA Yu TIAN State Key Laboratory of Tribology in Advanced Equipment Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China

Controllable friction regulation has drawn much interest in both scientific and industrial *** there have been many researches on friction regulation by many physical fields and chemical ***-sensitive materials are promising because it is relatively easy to change their properties compared with ***,a new kind of photo-induced grease/oil switched lubricant is designed and shows great reversibility under ultraviolet(UV)and visible(Vis)*** viscosity can change more than 50 times under different irradiation,and the coefficients of friction(COFs)obviously increase under Vis irradiation and decrease under UV irradiation,which performs better than those of the common *** to the experimental results,the phenomena are contributed to the break and reconstruction of the three-dimensional network inside the *** a switchable grease/oil state under different irradiation,this work provides a new principle for designing a smart lubricant with controllable friction regulation.

关键词： photo-induced spiropyran switched lubricant friction regulation

Inorganic ionic polymerization:From biomineralization to materials manufacturing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第2期17卷 550-569页

作者： Yanhua Sang Kexin Qin ruikang tang Zhaoming Liu Department of Chemistry Zhejiang UniversityHangzhou 310058China

Biomineralization process regulates the growth of inorganic minerals by complex molecules,proteins,and cells,endowing bio-materials with marvels structures and excellent *** intricate structures and compositions found in biominerals have inspired scientists to design and synthesize numerous artificial biomimetic *** methodology for controlling the formation of inorganics plays a pivotal role in achieving biomimetic structures and ***,the current approach predominantly relies on the classical nucleation theory,which hinders the precise preparation of inorganic materials by replicating the biomineralization ***,the development of“inorganic ionic polymerization”strategy has enabled us to regulate the arrangement of inorganic ions from solution to solid phase,which establishes an artificial way to produce inorganic materials analogous to the biomineralization *** on inorganic ionic polymerization,a series of achievements have been realized for the biomimetic preparation,including moldable construction of inorganic materials,hard tissue regeneration,and high-performance biomimetic ***,the utilization of inorganic ionic polymerization has also facilitated the production of numerous advanced materials,including novel structures that exceed the current knowledge of materials *** inorganic ionic polymerization system provides new artificial strategies and methodologies for the controllable synthesis of inorganics,which mimics the biomineralization process,paving the way for the future development of more high-performance materials.

关键词： biomineralization inorganic ionic polymerization biomimetic materials crystal growth synthetic methodology

Capillary Property of Entangled Porous Metallic Wire materials and Its Application in Fluid Buffers:Theoretical Analysis and Experimental Study

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 400-416页

作者： Yu tang Yiwan Wu Hu Cheng rong Liu Engineering research Center for Metal rubber School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350156China AECC Guizhou Liyang Aviation Power Co. LTDGuiyang 550014China College of Computer and Information Sciences Fujian Agriculture and Forestry UniversityFuzhou 350156China

Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of *** on the capillary property entangled porous metallic wire materials(EPMWM),this paper designed a composite buffer which uses EPMWM and viscous fluid as cushioning materials under the low-speed impact of the recoil force device of weapon equipment(such as artillery,mortar,etc.).Combined with the capillary model,porosity,hydraulic diameter,maximum pore diameter and pore distribution were used to characterize the pore structure characteristics of *** calculation model of the damping force of the composite buffer was *** low-speed impact test of the composite buffer was *** parameters of the buffer under low-speed impact were identified according to the model,and the nonlinear model of damping force was *** test results show that the composite buffer with EPMWM and viscous fluid can absorb the impact energy from the recoil movement effectively,and provide a new method for the buffer design of weapon equipment(such as artillery,mortar,etc.).

关键词： Entangled porous metallic wire materials Capillary property Viscousfluid Low-speed impact Damping force

Effect of structural characteristics on the transport characteristics of solid particles in the thermal storage and release system of circulating fluidized bed

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第6期89卷 22-31页

作者： Zengcai Ji Guoliang Song Zihua tang Liwei Sun Institute of Engineering Thermophysics Chinese Academy of SciencesBeijing100190China University of Chinese Academy of Sciences Beijing100049China Dalian National Laboratory for Clean Energy Dalian116023China

Coal-fired power generation stands as the most economically viable modulating power source in present-day *** holds the potential to offer prospective solutions to the challenges posed by the rapid expansion of intermittent,unpredictable,and unstable renewable energy *** particle thermal storage technology emerges as an effective means to enhance the flexibility of coal-fired circulating fluidized bed power *** attain an optimized structure for the solid particle thermal storage and release system in circulating fluidized bed units,experimental research was conducted on a 0.1 MWth circulating fluidized bed test *** study delved into the impact of ash storage bin geometries and the shapes of their feed-discharge valves on the control properties of solid particle *** experimental outcomes reveal that employing inverted m-shaped valve and dual U-shaped valves for feed control,alongside U-shaped valves and N-shaped valves for discharge control,both enable efficient and rapid storage and release of solid particles within the circulating fluidized *** similar air distribution conditions,the inverted m-shaped valve exhibits lower conveying energy consumption than the dual U-shaped valves,while the N-shaped valve excels in control characteristics over the U-shaped ***,the inverted m-shaped valve and the N-shaped valve demonstrate optimal overflow port heights,and the ash storage bin exhibits an optimum height-to-diameter ratio.

关键词： Solid particle Thermal storage System structure Transport regulation

Screening of low-friction two-dimensional materials from highthroughput calculations using lubricating figure of merit

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第8期12卷 1897-1908页

作者： Kewei tang Weihong QI Guoliang rU Weimin LIU State Key Laboratory of Solidification Processing and Center of Advanced Lubrication and Seal Materials Northwestern Polytechnical UniversityXi’an 710072China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai 265503China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

Two-dimensional materials are excellent lubricants with inherent ***,superlubricity has been reported for only a few of these ***,other promising two-dimentional(2D)materials with different physical properties cannot be discovered or applied in production;thus,energy consumption can be greatly ***,we carry out high-throughput calculations for 1,4752D materials and screen for low-friction *** set a standard,we propose,for the first time,a geometry-independent lubricating figure of merit based on the conditions for stick-slip transition and our theory of Moiré*** the efficient calculation of this figure of merit,an innovative approach was developed based on an improved registry index *** calculations,340 materials were found to have a figure of merit lower than 10−***,a small set of 21 materials with a figure of merit lower than 10−4 were screened *** materials can provide diverse choices for various *** addition,the efficient computational approach demonstrated in this work can be used to study other stacking-dependent properties.

关键词： two-dimensional materials high-throughput calculation tribology low-friction materials Moirépatterns

Structure-Preserving recurrent Neural Networks for a Class of Birkhoffian Systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第2期37卷 441-462页

作者： XIAO Shanshan CHEN Mengyi ZHANG ruili tang Yifa LSEC ICMSECAcademy of Mathematics and Systems ScienceChinese Academy of SciencesBeijing 100190China School of Mathematical Sciences University of Chinese Academy of SciencesBeijing 100049China School of Mathematics and Statistics Beijing Jiaotong UniversityBeijing 100044China

In this paper,the authors propose a neural network architecture designed specifically for a class of Birkhoffian systems—The Newtonian *** proposed model utilizes recurrent neural networks(rNNs)and is based on a mathematical framework that ensures the preservation of the Birkhoffian *** authors demonstrate the effectiveness of the proposed model on a variety of problems for which preserving the Birkhoffian structure is important,including the linear damped oscillator,the Van der Pol equation,and a high-dimensional *** with the unstructured baseline models,the Newtonian neural network(NNN)is more data efficient,and exhibits superior generalization ability.

关键词： Birkhoffian system k(z,t)-symplectic neural networks recurrent neural network

Effect of Air Distribution on the Transport Characteristics of Solid Particles in the Thermal Storage and release System of Circulating Fluidized Bed

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第4期33卷 1554-1563页

作者： JI Zengcai SONG Guoliang tang Zihua SUN Liwei State Key Laboratory of Coal Conversion Institute of Engineering ThermophysicsChinese Academy of SciencesBeijing100190China University of Chinese Academy of Sciences Beijing100049China Dalian National Laboratory for Clean Energy Dalian116023China

Solid particle heat storage technology offers a potential solution to the challenges posed by the significant growth of renewable energy sources,particularly in terms of grid security and ***,it has the capability to optimize the energy utilization efficiency of the power *** order to investigate the transport regulation characteristics of solid particles in the thermal storage and release system of a circulating fluidized bed(CFB),a test rig with a capacity of 0.1 MW(th)was *** rig was utilized to systematically study the transport regulation characteristics of solid particles under the double U-type valve feed structure and U-type valve discharge *** experimental findings indicate that the system's design enables efficient and rapid storage and release of solid particles in the *** air distribution mode,specifically the double U-type valve feed structure and the U-type valve discharge structure,significantly influence the feed and discharge characteristics of the ash storage *** was observed that the impact of loose air on these characteristics is more substantial than that of the return air,irrespective of the feed structure or the return *** adjusting the feed and discharge rate,it is recommended to adopt a scheme that involves coarse adjustment through loose air and fine adjustment through return air.

关键词： solid particle thermal storage air distribution mode transport regulation

resilience-incorporated seismic risk assessment of precast concrete frames with“dry”connections

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 403-425页

作者： Wu Chenhao tang Yuchuan Cao Xuyang Wu Gang Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education Nanjing 211102China Department of Civil and Environmental Engineering University of CaliforniaLos AngelesCA 90095USA School of Civil Engineering Southeast UniversityNanjing 211102China College of Civil and Transportation Engineering Hohai UniversityNanjing 210024China

A resilience-incorporated risk assessment framework is proposed and demonstrated in this study to manifest the advantageous seismic resilience of precast concrete frame(PCF)structures with“dry”connections in terms of their low damage and rapid *** framework integrates various uncertainties in the seismic hazard,fragility,capacity,demand,loss functions,and post-earthquake *** this study,the PCF structures are distinguished from ordinary reinforced concrete frame(rCF)structures by characterizing multiple limit states for the PCF based on its unique damage ***,probabilistic story-wise pushover analyses are performed to yield story-wise capacities for the predefined limit *** the seismic resilience analysis,a step-wise recovery model is proposed to idealize the functionality recovery process,with separate considerations of the repair and non-repair *** recovery model leverages the economic loss and downtime to delineate the stochastic post-earthquake recovery curves for the resilience loss *** such,contingencies in the probabilistic post-earthquake repairs are incorporated and the empirical judgments on the recovery parameters are largely *** proposed framework is demonstrated through a comparative study between two“dry”connected PCFs and one rCF designed as alternative structural systems for a prototype *** results from the risk quantification indicate that the PCFs show reduced loss hazards and lower expected losses relative to the ***,the PCF equipped with energy dissipation devices at the“dry”connections largely reduces the expected economic loss,downtime,and resilience loss by 29%,56%,and 60%,respectively,compared to the rCF.

关键词： precast concrete frame non-emulative precast system seismic resilience seismic risk functional recovery