检索结果-南通市图书馆

Chinese Journal of Polymer Science 2024年第3期42卷 322-332,I0006页

作者： qing-qing liu Qiu-Hao Lin Xiao-Dong Qi Nan Zhang Ting Huang Jing-Hui Yang Yong Wang School of Chemistry Southwest Jiaotong UniversityChengdu 610031China Key Laboratory of Advanced Technologies of Materials Ministry of Education of ChinaSouthwest Jiaotong UniversityChengdu 610031China

Polymer dielectrics with a high energy density and an available energy storage capacity have been playing an important role in advanced electronics and power systems. Nevertheless, the use of polymer dielectrics in harsh environments is limited by their low energy density at high temperatures. Herein, zirconium dioxide(ZrO_(2)) nanoparticles were decorated with amino group utilizing 4,4-methylenebis(phenyl isocyanate)(AMEO) and successfully incorporated into polyetherimide(PEI) matrix. The dielectric properties, breakdown strength, and energy storage performances of PEI/ZrO_(2)-AMEO nanocomposites were investigated from 25 ℃ to 150 ℃. It is found that the combination of moderate bandgap ZrO_(2) with modest dielectric constant and polar groups at interface with deep trap can offer an available strategy to simultaneously increase the dielectric constant and breakdown strength of polymer dielectrics. As a result, the composites containing ZrO_(2)-AMEO exhibit excellent energy storage performance at elevated temperatures. Specially, the PEI-based composites with 3 vol% ZrO_(2)-AMEO display a maximum discharged energy density(U_(d)) of 3.1 J/cm^(3) at 150 ℃, presenting 90% higher than that of neat PEI. This study may help to better develop the polymer-based dielectric composite applied at elevated temperatures.

关键词： Polyetherimide High temperature dielectric ZrO_(2) Interface

Regioregular Asymmetric Diketopyrrolopyrrole Copolymers with Good Molecular Ordered Assembly Ability for High-performance Polymer Transistors

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2023年第8期41卷 1215-1222,I0006页

作者： qing-qing liu Jia-Xin Yang Man Zhao Can Gao Bo Guan Huan-Li Dong Beijing National Laboratory for Molecular Sciences Key Laboratory of Organic SolidsInstitute of ChemistryChinese Academy of SciencesBeijing 100190China School of Chemical Sciences University of Chinese Academy of SciencesBeijing 100049China

Introduction of asymmetric units into conjugated polymers is an important strategy to regulate the photophysical and electronic properties of polymers,as asymmetric units can not only regulate solubility and energy levels,but also molecular stacking and orientation,thus giving much higher optoelectronic ***,very few studies have been reported in this *** semiconducting properties of conjugated polymers could be regulated through regioregularity ***,we took the asymmetric thiophene/pyridine side group DPP as core and developed the regioregular monomer T-Py-DPP through three steps:alkyl chain introduction,tin monomer coupling and NBS double *** T-Py-DPP monomer was polymerized into reg-PPy TDPP-2FBT with a head-to-head *** regioregularity of T-Py-DPP unit endowed reg-PPy TDPP-2FBT with backbone planarity,self-assembly orientation,network-like morphology and high crystallinity in films,thus the superior bipolar transport *** highest hole and electron mobilities of reg-PPy TDPP-2FBT were 0.93 and 0.57 cm^(2)·V^(-1)·s^(-1),respectively,with 40%improvement relative to the regiorandom polymer.

关键词： Asymmetric copolymers Regioregularity Good orientation Organic field-effect transistor Enhanced performance

Vertically grown MoS_(2)nanosheets on graphene with defect-rich structure for efficient sodium storage

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1062-1071页

作者： Ying Wang Jia-Peng He Han-qing Pan qing-Peng Wang Lei Zhang Yong-Chang liu qing-Hong Wang School of Chemistry&Materials Science Jiangsu Key Laboratory of Green Synthetic Chemistry for Functional MaterialsJiangsu Normal UniversityXuzhou221116China Institute of Biopharmaceutical Research Liaocheng UniversityLiaocheng252059China Beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyState Key Laboratory for Advanced Metals and MaterialsUniversity of Science and Technology BeijingBeijing100083China Centre for Catalysis and Clean Energy Gold Coast CampusGriffith UniversityGold CoastQLD4222Australia

The synthesis of a perpendicular growth structure of MoS_(2)nanosheets on graphene for efficient sodium storage is challenging yet ideal due to the benefits of open ion diffusion channels and high electronic *** this study,we have successfully fabricated a novel structure of vertical MoS_(2)nanosheets on graphene,with ZnS nanoparticles serving as bonding points(MoS_(2)/ZnS/G),through a facile hydrothermal *** the synthesis process,Zn^(2+)not only acts as a landing site for the vertical growth of MoS_(2)nanosheets but also triggers the formation of a defect-rich structure in the final *** unique architecture of MoS_(2)/ZnS/G effectively combines the advantages of a vertically aligned geometry and a defectrich structure for energy *** resulting structure displays shortened transport paths for electrons/ions,enhanced conductivity,improved structural integrity,and an increased number of active sites for promising electrochemical *** expected,when used as anode for sodium-ion batteries,the as-synthesize d MoS_(2)/ZnS/G exhibits excellent rate capability(high capacity of 298 mAh·g^(-1)at 5 A·g^(-1))and good cycling stability(a capacity decay of 0.056%per cycle after 500 cycles at 1 A·g^(-1)).According to the kinetic investigations,the electrochemical process of the MoS_(2)/ZnS/G sample is primarily governe d by a pseudocapacitive behavior,which enhances the charge/discharge kinetics and allows the MoS_(2)/ZnS/G structure to remain intact during cycling.

关键词： MoS_(2) Perpendicular growth Graphene Sodium storage Electrochemical performance

Contact engineering for temperature stability improvement of Bi-contacted MoS2 field effect transistors

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 172-179页

作者： Zizheng liu qing ZHANG Xiaohe HUANG Chunsen liu Peng ZHOU State Key Laboratory of Integrated Chip and Systems School of MicroelectronicsZhangjiang Fudan International Innovation CenterFudan University Frontier Institute of Chip and System Shanghai Key Lab for Future Computing Hardware and SystemFudan University Shaoxin Laboratory

Semimetallic bismuth（Bi） is one of the most effective strategies for reducing the contact resistance of two-dimensional transition metal dichalcogenide field effect transistors（FETs）. However, the low melting point of Bi contact（271.5℃） limits its reliable applications. In this study, we demonstrated that the temperature stability of Bi-contacted electrodes could be improved by inserting a high-melting point semimetallic antimony（Sb） between the Bi contacting layer and the gold（Au） capping layer. The proposed Bi/Sb/Au contact electrodes tended to form a metal mixture with a continuous surface during the heating process（Voids appeared on the surface of the Bi/Au contact electrodes after heating at 120℃）. Because of the improved contacting layer formed by the semimetal Bi/Sb alloy, the fabricated Bi/Sb/Au-contacted molybdenum sulfide（MoS2） FETs with different gate lengths demonstrated higher on-state current stability after heating treatment than the Bi/Au contact. Because of the Bi/Sb/Au contact and poly（methyl methacrylate） package, the MoS2FETs demonstrated time stability of at least two months from the almost unchanged transfer characteristics. The electrical stability indicates that the insertion of semimetallic Sb is a promising technology for reliable Bi-based contact.

关键词： temperature stability semimetallic bismuth contact semimetallic antimony contact MoS$_{2}$ FETs time stability

同方期刊数据库

High-Superelasticity NiTi Shape Memory Alloy by Directed Energy Deposition-Arc and Solution Heat Treatment

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 132-144页

作者： Junyi Ma Lin Yu qing Yang Jie liu Lei Yang State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430070China School of Transportation and Logistics Engineering Wuhan University of TechnologyWuhan430074China

Directed energy deposition-arc(DED-Arc)technology has the advantages of simple equipment,low manufacturing cost and high deposition rate,while the use of DED-Arc has problems of microstructure inhomogeneity,position dependence of macroscopic mechanical properties and ***,it is necessary to carry out a subsequent heat treatment to improve its microstructure uniformity,mechanical properties and *** this investigation,the DED-Arc 15-layer NiTi alloy thin-walled parts with the solution treatment at different process parameters were studied to analyze the effects of solution heat treatment on microstructure,phase composition,phase transformation,microhardness,tensile and *** temperature range of solution treatment is 800-1050℃,and the treatment time range is 1-5.5 *** results show that after solution treatment at 800℃/1 h,the content of precipitated phase decreases,the grain is refined,the microhardness increases,and the mechanical properties in the 0°direction are *** strain recovery rate after 10 tensile cycles has increased from 37.13%(as-built)to 49.25%(solid solution treatment).This research provides an effective post treatment method for high-performance DED-Arc NiTi shape memory alloys.

关键词： Directed energy deposition-arc(DED-Arc) Cold metal transfer(CMT) NiTi shape memory alloys Microstructure Phase transformation Solution heat treatment

Relationship between hydrogenation degree and pyrolysis performance of jet fuel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 35-42页

作者： qing liu Tinghao Jia Lun Pan Jijun Zou Xiangwen Zhang Key Laboratory for Green Chemical and Technology School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China Haihe Laboratory of Sustainable Chemical Transformations Tianjin 300192China Zhejiang Institute of Tianjin University Ningbo 315201China Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology College of Chemical and Biological EngineeringZhejiang UniversityHangzhou 310027China

Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF) is of great significance for the design and optimization of advanced EHFs. In this work, the effect of deep hydrogenation on the pyrolysis of commercial RP-3 is *** with different hydrogenation degrees were obtained by the partially and completely catalytic hydrogenation and their pyrolysis performances were investigated using an apparatus equipped with an electrically heated tubular reactor. The results show that with the increase of hydrogenation degree, fuel conversion almost remains constant during the pyrolysis process(500-650°C, 4 MPa);however, the heat sink increases slightly, and the anti-coking performance significantly improves, which are highly related to their H/C ratios. Detailed characterisations reveal that the difference of the pyrolysis performance can be ascribed to the content of aromatics and cycloalkanes: the former are prone to initiate secondary reactions to form coking precursors, while the latter could act as the hydrogen donor and release hydrogen, which will terminate the radical propagation reactions and suppress the coke deposition. This work should provide the guidance for upgrading EHFs by modulating the composition of EHFs.

关键词： RP-3 Fuel Pyrolysis Hydrogenation Deposition

Recovery of cyanophycin granule polypeptide from activated sludge: carbon source dependence and aggregation-induced luminescence characteristics

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第2期18卷 25-34页

作者： Kui Zou Hongyuan liu Bo Feng Taiping qing Peng Zhang College of Environment and Resources Xiangtan UniversityXiangtan 411105China

In the sewage treatment process,facilitating the conversion of pollutants into value-added resources holds great potential for reducing the amount of greenhouse gas emissions and promoting economic *** granule polypeptide(CGP),a recently discovered high value-added biopolymer present in activated sludge,has provided new avenues for the recovery of ***,the mechanisms that regulate CGP synthesis and the characteristics of this biopolymer in activated sludge remain unclear thus *** study investigated the synthesis of CGP,polyhydroxyalkanoates(PHA),and alginate-like exopolysaccharides(ALE)in various microbial aggregates under different carbon sources feeding *** results showed that the CGP yields was superior that of PHA and ALE when subjected to identical carbon source feeding ***,biofilm was more conducive to CGP accumulation than floc *** with glucose and methanol,sodium acetate significantly enriched the CGP synthetase-encoding gene(cphAabundance=~17419),resulting in the highest CGP yield(average 107.1 mg/g MLSS)in both biofilm and floc *** study is the first to reported the characteristic fluorescence of CGP(Ex/Em=~360/450 nm)caused by the aggregated luminescence of arginine on the side ***,this study highlights the potential application of CGP as a fluorescent material and offers insights into CGP recovery from activated sludge in wastewater treatment plants.

关键词： Cyanophycin Polyhydroxyalkanoate Alginate-like exopolysaccharides Bioresource recovery Aggregation-induced luminescence

Isogeometric Analysis for the Arbitrary AFG Microbeam with Two-Phase Nonlocal Stress-Driven Model

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第2期37卷 341-360页

作者： Pei-Liang Bian Zhaowei liu Hai qing Tiantang Yu Department of Engineering Mechanics Hohai UniversityNanjing211100China State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and AstronauticsNanjing210016China

Scale effects play critical roles in the mechanical responses of *** isogeometric analysis was developed here to investigate the mechanical responses of an axially functionally graded *** Euler–Bernoulli beam model was utilized,and size effects in the structure were modeled with a stress-driven two-phase local/nonlocal integral *** governing equation of microstructures was given in an equivalent differential form with two additional constitutive boundary *** framework was verified and utilized to analyze the microbeam’s static and dynamic mechanical *** present work showed great potential for modeling various types of functionally graded microstructures.

关键词： Isogeometric analysis Size effect Functionally graded material Nonlocal theory Euler-Bernoulli beam

Burning Numbers of Barbells

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematicae Applicatae Sinica 2024年第2期40卷 526-538页

作者： Hui-qing liu Rui-ting ZHANG Xiao-lan HU Hubei Key Laboratory of Applied Mathematics&Faculty of Mathematics and Statistic Hubei UniversityWuhan 430062China Hubei Key Laboratory of Mathematical Sciences&School of Mathematics and Statistics Central China Normal UniversityWuhan 430079China

Motivated by a discrete-time process intended to measure the speed of the spread of contagion in a graph,the burning number b(G)of a graph G,is defined as the smallest integer k for which there are vertices x1,…xk su... 详细信息

关键词： burning number short/long barbell isometric subtree cycle

In Vivo Voltammetric Imaging of Metal Nanoparticle-Catalyzed Single-Cell Electron Transfer by Fermi Level-Responsive Graphene

在线全文

学校读者我要写书评

暂无评论

Research 2024年第1期2023卷 271-280页

作者： qing Xia Rui liu Xueqin Chen Zixuan Chen Jun-Jie Zhu State Key Laboratory of Analytical Chemistry for Life Science School of Chemistry and Chemical EngineeringNanjing UniversityNanjing 210023P.R.China Shenzhen Research Institute of Nanjing University Shenzhen 518000P.R.China

Metal nanomaterials can facilitate microbial extracellular electron transfer(EET)in the electrochemically active ***,the role of nanomaterials/bacteria interaction in this process is still ***,we reported the single-cell voltammetric imaging of Shewanella oneidensis MR-1 at the single-cell level to elucidate the metal-enhanced EET mechanism in vivo by the Fermi level-responsive graphene *** oxidation currents of~20 fA were observed from single native cells and gold nanoparticle(AuNP)-coated cells in linear sweep voltammetry *** the contrary,the oxidation potential was reduced by up to 100 mV after AuNP *** revealed the mechanism of AuNP-catalyzed direct EET decreasing the oxidation barrier between the outer membrane cytochromes and the *** method offered a promising strategy to understand the nanomaterials/bacteria interaction and guide the rational construction of EET-related microbial fuel cells.

关键词： Fermi voltammetry Electron