检索结果-南通市图书馆

Nanotechnology and Precision Engineering 2024年第3期7卷 1-12页

作者： Ben-Song Wang Ang Gao Song-Wei Huang qi-hong ning Cheng Zhou qi-Xiang Song Da-XiangCui School of Electronic Information and Electrical Engineering Shanghai Jiao Tong UniversityShanghai 200240China Department of Urology Renji HospitalSchool of MedicineShanghai Jiao Tong UniversityShanghai 200240China

Flexible pressure sensors are lightweight and highly sensitive,making them suitable for use in small portable devices to achieve precise measurements of tiny *** article introduces a low-cost and easy-fabrication strategy for piezoresistive flexible pressure *** embedding silver nanowires into a polydimethylsiloxane layer with micro-pyramids on its surface,a flexible pressure sensor is created that can detect low pressure (17.3 Pa) with fast response (<20 ms) and high sensitivity (69.6 mA kPa-1).Furthermore,the pressure sensor exhibits a sensitive and stable response to a small amount of water flowing on its *** this basis,the flexible pressure sensor is innovatively combined with a micro-rotor to fabricate a novel urinary flow-rate meter (uroflowmeter),and results from a simulated human urination experiment show that the uroflowmeter accurately captured all the essential shape characteristics that were present in the pump-simulated urination *** ahead,this research provides a new reference for using flexible pressure sensors in urinary flow-rate monitoring.

关键词： Flexible pressure sensor Silver nanowires Portable device Uroﬂowmeter Healthcare

A robust viscoelastic surfactant tolerating 20% HCl up to 150℃ for oil well stimulation

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1865-1874页

作者： Ji Wang ning qi hong-Yao Yin Yu-Jun Feng Polymer Research Institute State Key Laboratory of Polymer Materials EngineeringSichuan UniversityChengdu610065SichuanPR.China Tianfu Yongxing Laboratory New Theory and Technology of CO_(2) Capture Research CenterChengdu610065SichuanPR China School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongPR China

Viscoelastic surfactants(VES)are often used as viscous diverters in acidizing stimulation to prolong the acid consumption time and maximize zonal coverage of the acid for improving well ***,the ceiling temperature of commercial VES cannot exceed 120℃in practical use because of the poor thermal stability and fragile molecular structure,hindering their implementation in hightemperature oil reservoirs,i.e.,≥150℃.Here we synthesized a novel C22-tailed diamine,N-erucaminopropyl-N,N-dimethylamine(EDPA),and examined comparatively its rheological behavior,assemblies morphology and molecular stability in 20 wt%HCl with a commercial VES,erucyl dimethyl amidopropyl betaine(EDAB).The feasibility of EDPA for acidizing stimulation was assessed by acid etching of carbonate rock with its HCl solution at 150℃.Rheological results showed that the 2.5 wt%EDPA—20 wt%HCl solution maintains stable viscosity of 90 m Pa s at 150℃for 60 min,while that of 2.0 wt%EDAB HCl solution is just 1 m Pa s under identical conditions.1H NMR spectra and cryo-TEM observations revealed that the chemical structure and self-assembled architectures of EDPA remained intact in such context,but the EDAB suffered from degradation due to the hydrolysis of the amide group,accounting for the poor heat-resistance and *** reaction rate of 2.5 wt%EDPA HCl solution with carbonate rock was one order of magnitude lower than that of 20 wt%HCl solution at 150℃,underpinning the potential of EDPA to be used in the high-temperature reservoirs *** work improved the thermal tolerance of VES in highly concentrated HCl solution,paving a feasible way for the acidization of high-temperature reservoir environments(~150℃).

关键词： Viscoelastic surfactants Thermal stability Self-diverting acid Wormlike micelles Acidizing stimulation

Effects of heat treatment on microstructures and properties of a heterostructured alloy with dissimilar components fabricated by WAAM

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4441-4461页

作者： Ming-Cai Pan Jun-qiang Xu Yong Peng ning-ning Liang Si Lan qi Zhou Ke-hong Wang School of Materials Science and Engineering Nanjing University of Science and Technology Key Laboratory of Controlled Arc Intelligent Additive Manufacturing Technology

Heat treatment significantly influences homogeneous material microstructures and mechanical properties, which can be improved by an optimal heat treatment process. However, heat treatment application to heterogeneous materials presents significant challenges due to compositional and microstructural heterogeneities. Herein,a laminated heterostructured alloy comprising alternating316L stainless steel（SS） and 18Ni300 maraging steel（MS）layers fabricated using wire and arc additive manufacturing was investigated. A solution treatment was applied at900 °C for 0.5 h. Subsequently, the solution-treated and asfabricated（AF） samples were aged at 500 °C for 4 h; these samples were denoted SA and AT, respectively. The AT phase compositions and orientations were similar to those of AF. The SA 316L SS layer resembled that of AF, but the SA 18Ni300 MS layers exhibited a reduced austenite phase fraction and refined grain size, attributable to solid-state transformation. In the AT sample, aging induced the formation of nanoscale acicular ω phase and ellipsoidal Ni3Ti,Fe2Mo, and X precipitates in the 18Ni300 MS ***, the SA precipitates contained acicular Fe Ni2and ellipsoidal ω, Ni3Ti, and X precipitates, and their fractions were lower than those in AT precipitates. The18Ni300 MS layer microhardness in the heat-treated samples increased due to nanoprecipitation, but the 316L SS layer microhardness resembled that of AF. The AT and SA ultimate tensile strengths increased to（1360 ± 50） and（1473 ± 41） MPa, respectively, attributable to precipitation strengthening. The SA 316L SS layer exhibited a high stress-induced martensite fraction, enhancing the ductility of heated samples.

关键词： Heat treatment Laminated heterostructured alloy Mechanical property Microstructure Wire and arc additive manufacturing

Effects of orientation on the fatigue crack growth behaviors of the ZK60 magnesium alloy in air and PBS

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 281-294页

作者： Jiaqi Hu Zheng Liu Zuoliang ning hong Gao School of Chemical Engineering and Technology Tianjin UniversityTianjin 300072China Tianjin Key Laboratory of Chemical Process Safety and Equipment Technology Tianjin 300072China

Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium *** investigate the influences of specimen orientation,the corrosion tests and(corrosion)fatigue crack growth tests were *** rolled and transverse surfaces of the materials show distinct corrosion rate differences in the stable corrosion stage,but the truth is the opposite for the initial stage of *** air,specimen orientations have a significant influence on the plastic deformation mechanisms near the crack tip,which results in different fatigue fracture surfaces and cracking *** with R-T specimens,N-T specimens show a slower fatigue crack growth(FCG)rate in air,which can be attributed to crack closure effects and deformation twinning near the crack *** corrosion environment will not significantly change the main plastic deformation mechanisms for the same type of ***,the FCG rate in phosphate buffer saline(PBS)is one order of magnitude higher than that in air,which is caused by the combined effects of hydrogen-induced cracking and anodic *** to the similar corrosion rates at crack tips,the specimens with different orientations display close FCG rates in PBS.

关键词： Magnesium alloy Orientation Corrosion Fatigue crack growth

A stable one-point quadrature rule for three-dimensional numerical manifold method

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第5期67卷 1401-1416页

作者： ZHANG ning ZHENG hong YANG Liang WU WenAn YUAN Chi School of Civil Engineering Qinghai UniversityQinghai810016China Key Laboratory of Urban Security and Disaster Engineering Ministry of EducationBeijing University of TechnologyBeijing100124China Faculty of Engineering China University of GeoscienceWuhan430074China

We present a numerically stable one-point quadrature rule for the stiffness matrix and mass matrix of the three-dimensional numerical manifold method(3D NMM).The rule simplifies the integration over irregularly shaped manifold elements and overcomes locking issues,and it does not cause spurious modes in modal *** essential idea is to transfer the integral over a manifold element to a few moments to the element center,thereby deriving a one-point integration rule by the moments and making modifications to avoid locking *** the stiffness matrix,after the virtual work is decomposed into moments,higher-order moments are modified to overcome locking issues in nearly incompressible and bending-dominated *** the mass matrix,the consistent and lumped types are derived by *** particular,the lumped type has the clear advantage of *** proposed method is naturally suitable for 3D NMM meshes automatically generated from a regular *** tests justify the accuracy improvements and the stability of the proposed procedure.

关键词： three-dimensional numerical manifold method quadrature rule locking mass lumping

Effect of solvent on the initiation mechanism of living anionic polymerization of styrene:A computational study

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第5期69卷 135-142页

作者： Shen Li Yin-ning Zhou Zhong-Xin Liu Zheng-hong Luo School of Chemical Engineering and Technology Hainan UniversityHaikou 570228China Department of Chemical Engineering School of Chemistry and Chemical EngineeringState Key Laboratory of Metal Matrix CompositesShanghai Jiao Tong UniversityShanghai 200240China

For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and *** this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic *** terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent ***,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate ***,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic *** is found that in benzene and n-pentane,the polymerization rate exhibits first-order ***,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.

关键词： Living anionic polymerization Solvent effect Reaction kinetics Computational chemistry Mathematical modeling Kinetic modeling

Ballistic performance of spherical fragments penetrating PCrNi3MoV target plates

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 295-307页

作者： Dou hong Wenbin Li Yu Zheng Yiming Li ning Jiang Kebin Zhang Ministerial Key Laboratory of ZNDY Nanjing University of Science and TechnologyNanjingChina

PCrNi3MoV steel is a medium-carbon,low-alloy quenched and tempered steel that finds its applications in military gun barrels due to the high wear resistance and ablation *** study the penetration and failure modes of PCrNi3MoV plates impacted by tungsten spheres,tungsten spheres of various diameters(5 mm,8 mm,and 10 mm)were used to impact PCrNi3MoV steel plates with thicknesses of 6 mm,9 mm,and 14 *** penetration performance of the spheres was analyzed for different velocities,and the ultimate penetration velocity of the plate was *** was found that the primary failure modes of the PCrNi3MoV plate were compression pitting failure and shear *** the dimensional analysis method,a relationship between the bulge height of the steel plate and the fragment velocity,an equation for the ultimate penetration velocity,and a relationship between the target penetration energy and the fragment velocity were ***,a projectile-target action index was proposed to describe the process of tungsten spheres with different velocities impacting target *** results suggested that under the same thickness of the target plate,a larger-diameter fragment required more kinetic energy to obtain the same ultimate penetration effect as a smaller-diameter *** equations obtained through dimensional analysis predicted values that agreed well with experimental values,indicating that these equations can be applied to engineering applications.

关键词： Impact damage Ultimate penetration velocity Bulge height Target penetration energy Failure modes

An aircraft brake control algorithm with torque compensation based on RBF neural network

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 438-450页

作者： ning BAI Xiaochao LIU Juefei LI Zhuangzhuang WANG Pengyuan qi Yaoxing SHANG Zongxia JIAO School of Automation Science and Electrical Engineering Beihang UniversityBeijing 100191China Science and Technology on Aircraft Control Laboratory Beihang UniversityBeijing 100191China Key Laboratory of Advanced Aircraft Systems(Beihang University) Ministry of Industry and Information TechnologyBeijing 100091China Research Institute for Frontier Science Beihang UniversityBeijing 100191China ningbo Institute of Technology of Beihang University Ningbo 315800China Tianmushan Laboratory Xixi Octagon CityYuhang DistrictHangzhou 310023China

The wheel brake system of an aircraft is the key to ensure its safe landing and rejected takeoff.A wheel’s slip state is determined by the brake torque and ground adhesion torque,both of which have a large degree of *** is this nature that brings upon the challenge of obtaining high deceleration rate for aircraft brake *** overcome the disturbances caused by the above uncertainties,a braking control law is designed,which consists of two parts:runway surface recognition and wheel’s slip state *** runway surface recognition,the identification rules balancing safety and braking efficiency are defined,and the actual identification process is realized through recursive least square method with forgetting *** slip state tracking,the LuGre model with parameter adaptation and a brake torque compensation method based on RBF neural network are proposed,and their convergence are *** effectiveness of our control law is verified through simulation and ground *** in the experiments on the ground inertial test bench,compared to the improved pressure-biased-modulation(PBM)anti-skid algorithm,fewer wheel slips occur,and the average deceleration rate is increased by 5.78%,which makes it a control strategy with potential for engineering applications.

关键词： Aircraft landing Brakes Disturbance observer Neural networks Runway identification

Study on the flow structure in curved open channels with suspended vegetation using multi relaxation time lattice Boltzmann method

在线全文

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第2期36卷 300-315页

作者： He-fang Jing qiao-ling Zhang Wei-hong Wang Zong-ning Zhang School of Mathematics and Information Science North Minzu UniversityYinchuan750021China School of Civil Engineering North Minzu UniversityYinchuan750021China Department of Basic Courses Zhengzhou University of Science and TechnologyZhengzhou450064China

Suspended vegetation in rivers,lakes,reservoirs and canals can change flow structure,which will in turn affect the sediment transport and cause the variation of water ecological *** order to study the characteristics of bend flow through suspended vegetation,three-dimensional numerical simulations are carried out by using the multi-relaxation-time lattice Boltzmann method(MRT-LBM).The drag force induced by vegetation is added in the velocity correction in the equilibrium distribution and a hybrid format combined bounce and specular reflection scheme is applied in the solid-fluid *** the validation of this model,six cases are designed to conduct the numerical simulations according to the root depth and the arrangement of *** simulated results show that the suspended vegetation can redistribute the flow structure in curved open *** the arrangement of suspended vegetation,the main flow moves to the side without vegetation,and the distribution of velocity tends to be balanced when vegetation is arranged on the entire cross section,the range of circulating current is reduced from the whole cross section to the local position without vegetation,however,the circulating current can still exist in the curve where the suspended vegetation enters less than half of the water *** addition,it can also be concluded that the suspended vegetation can affect the lateral gradient of flow velocity,and the bed shear stress in the curved channel.

关键词： Multi-relaxation-time lattice Boltzmann method(MRT-LBM) suspended vegetation curved open channel circulating current bed shearstress

Reorientation and obstacle avoidance control of free-floating modular robots using sinusoidal oscillator

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第6期37卷 262-275页

作者： Zhiyuan YANG Mingzhu LAI Jian qi ning ZHAO Xin SUI Jie ZHAO Yanhe ZHU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China School of Mathematics and Statistics Hainan Normal UniversityHaikou 571158China

This paper presents that a serpentine curve-based controller can solve locomotion control problems for articulated space robots with extensive flight phases,such as obstacle avoidance during free floating or attitude adjustment before *** proposed algorithm achieves articulated robots to use closed paths in the joint space to accomplish the above *** snakes,which can shuttle through gaps and adjust their landing posture by swinging their body during gliding in jungle environments,inspired the design of two *** first maneuver generates a rotation of the system by varying the moment of inertia between the joints of the robot,with the magnitude of the net rotation depending on the controller *** maneuver can be repeated to allow the robot to reach arbitrary *** second maneuver involves periodic undulations,allowing the robot to avoid collisions when the trajectory of the global Center of Mass(CM)passes through the *** maneuvers are based on the improved serpenoid curve,which can adapt to redundant systems consisting of different numbers of ***,the simulation illustrates that combining the two maneuvers can help a free-floating chain-type robot traverse complex *** proposed algorithm can be used with similar articulated robot models.

关键词： Collision avoidance Modularrobots Reorientation Free-floating space robots Nonholonomic systems Biologically inspired controllers Serpenoid curve