检索结果-南通市图书馆

CSEE Journal of Power and Energy Systems 2024年第1期10卷 151-161页

作者： Haiting Shan Luliang zhang q.H.Wu Mengshi Li School of Electric Power Engineering South China University of Technology(SCUT)Guangzhou 510641China

Sparse measurements challenge fault location in distribution *** paper proposes a method for asymmetric ground fault location in distribution networks with limited measurements.A virtual injected current vector is formulated to estimate the fault line,which can be reconstructed from voltage sags measured at a few buses using compressive sensing(CS).The relationship between the virtual injected current ratio(VICR)and fault position is deduced from circuit analysis to pinpoint the ***,a two-stage recovery strategy is proposed for improving reconstruction accuracy of the current vector,where two different sensing matrixes are utilized to improve the *** proposed method is validated in IEEE 34 node test *** results show asymmetric ground fault type,resistance,fault position and access of distributed generators(DGs)do not significantly influence performance of our *** addition,it works effectively under various scenarios of noisy measurement and line parameter *** on 134 node test feeders prove the proposed method is also suitable for systems with more complex structure.

关键词： Distribution networks fault location reconstruction accuracy two-stage recovery virtual injected current ratio

Seismic and geological evidence of hidden faults in the Yinpan Reservoir area based on a dense seismic array

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第7期67卷 2401-2407页

作者： Guangyao YIN Huai zhang Liwen GONG q ipeng BAI Yicun GUO Bing zhang Yaolin SHI Key Laboratoryof Earth System Numerical Modeling and Application(Chinese Academyof Sciences) College of Earth and Planetary SciencesUniversity of Chinese Academy of SciencesBeijing 100049China Key Laboratory of Computational Geodynamics Chinese Academy of SciencesBeijing 100049China Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai) Zhuhai 519080China Beijing Yanshan Critical Zone National Field Scientific Observation and Research Station Beijing 101408China Chongqing Earthquake Agency Chongqing 401147 China Institute of Earthquake Forecasting China Earthquake AdministrationBeijing 100036China Hangzhou Applied Acoustics Research Institute Hangzhou 311100China State Key Laboratory of Geodesy and Earths Dynamics Innovation Academy for Precision Measurement Science and TechnologyCASWuhan 430077China

*** November 23,2017,an M_(S)5.0 earthquake occurred in Wulong,Chongqing,China,resulting in tens of casualties and considerable economic ***,the epicenter of this earthquake was located in the transition zone from the... 详细信息

关键词： earthquake southeast seismic

Electron kinetic effects in back-stimulated Raman scattering bursts driven by broadband laser pulses

在线全文

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第4期9卷 54-67页

作者： q.K.Liu L.Deng q.Wang X.zhang F.q.Meng Y.P.Wang Y.q.Gao H.B.Cai S.P.Zhu Graduate School China Academy of Engineering PhysicsBeijing 100088China Institute of Applied Physics and Computational Mathematics Beijing 100094China School of Nuclear Science and Technology University of Science and Technology of ChinaHefei 230026China Shanghai Institute of Laser Plasma Shanghai 201800China HEDPS Center for Applied Physics and TechnologyPeking UniversityBeijing 100871China School of Physics Zhejiang UniversityHangzhou 310027China

We examine electron kinetic effects in broadband-laser-driven back-stimulated Raman scattering(BSRS)bursts using particle-in-cell *** bursts occur during the nonlinear stage,causing reflectivity spikes and generating large numbers of hot ***-duration simulations are performed to observe burst events,and a simplified model is developed to eliminate the interference of the broadband laser’s random intensity *** the simplified model,we isolate and characterize the spectrum of electron plasma *** spectrum changes from a sideband structure to a turbulence-like structure during the burst.A significant asymmetry in the spectrum is *** asymmetry is amplified and transferred to electron phase space by high-intensity broadband laser pulses,leading to violent vortex-merging and generation of hot *** proportion of hot electrons increases from 6.76%to 14.7%during a single violent burst *** demonstrate that kinetic effects profoundly influence the BSRS evolution driven by broadband lasers.

关键词： scattering kinetic simplified

Precipitation of multi-type nano-quasicrystals in a Mg-Zn-Y alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.Z.Wang X.Z.Zhou L.F.zhang H.q.Ye Z.q.Yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji Hua Laboratory Foshan 528251China Foshan University Foshan 528231China

Mg-6Zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-Zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

In situ TEM investigation of electron irradiation and aging-induced high-density nanoprecipitates in an Mg-10Gd-3Y-1Zn-0.5Zr alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1841-1853页

作者： M.Lv H.L.Ge q.q.Jin X.H.Shao Y.T.Zhou B.zhang X.L.Ma Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of Sciences72 Wenhua RoadShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Materials Science and Engineering Research Center Guangxi University of Science and TechnologyLiuzhou 545006China

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3Y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the *** results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being *** is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous *** latter plays a key role in precipitation *** result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

关键词： Mg alloy Electron beam irradiation Hardening Precipitates In-situ TEM

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.H.zhang H.Li Z.W.Yang X.Liu q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

Rational design of AgGaS/ZnS/ZnS quantum dots with a near-unity photoluminescence quantum yield via double shelling scheme

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 235-242页

作者： H.X.Lu H.Liu Z.Z.Fu Y.Y.Chen H.q.Dai Z.Hu W.L.zhang R.q.Guo Institute for Electric Light Sources School of Information Science and TechnologyFudan UniversityShanghai 200433China Institute of Future Lighting Academy for Engineering and TechnologyFudan UniversityShanghai 200433China Yiwu Research Institute of Fudan University YiwuZhejiang 322000China Zhongshan-Fudan Joint Innovation Center Zhongshan 528437China

In this study,a two-step method was used to synthesize highly luminescent AgGaS/ZnS/ZnS quantum dots(qDs).In the first step,an inner ZnS shell was formed via a one-pot method,which resulted in a smaller lattice mismatch between the AgGaS core and the outer ZnS shell,thereby facilitating the formation of a thick outer *** the two-step shelling process,the synthesized AgGaS/ZnS/ZnS qDs showed an excellent photoluminescence quantum yield(PLqY)of 96.4%with a peak wavelength of 508 nm,repre-senting the highest PLqY reported thus far for AgGaS ***,the effect of halogen ions in Zn precursors on the shelling process was *** was proposed that the capacity of halogen ions to coordinate with the qDs influenced the balance between Zn cation diffusion and ZnS shelling ***,the ZnS shelling reaction was dominant when ZnCl_(2)was employed,while Zn cation diffusion was the dominant process under the I^(−)-rich *** work provides insights into the interfacial restructuring during the ZnS shelling and offers a clear map for the tailored synthesis of core/shell qDs.

关键词： AgGaS quantum dots Photoluminescence Core/shell Alloyed core/shell interface

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang C.J.Wang W.V.Yue Z.J.zhang Z.q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(qA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement quality assessment

Creep-induced redistribution of alloying elements in CZ1 zirconium alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第6期173卷 31-44页

作者： W.T.Lin q.Y.Lv D.Jiao L.B.zhang J.Tan G.Sha J.Hu China Nuclear Power Technology Research Institute Shenzhen 518026China School of Material Science and Engineering Nanjing University of Science and TechnologyNanjing 210094China

Introducing minor alloying elements is an effective strategy to improve the corrosion and mechanical properties of zirconium alloys for nuclear *** in-reactor service,external environment and stress can affect the distribution of alloying elements,substantially changing the degradation process of zirconium *** date,there is a lack of in-depth understanding of the interaction between creep and microchemistry ***,we conducted systematic transmission electron microscopy(TEM)and atom probe tomography(APT)investigations to address creep-induced redistribution of alloying elements in CZ1(Zr-Sn-Nb-Fe-Cr-Cu)zirconium alloy with different initial ***,Fe,Sn,and Cu are found to co-segregate at grain *** higher the intermediate annealing temperature,the larger the Gibbsian interfacial excesses of solute elements *** further demonstrate that creep can reduce the excess value of Fe at grain boundaries due to the coarsening of Zr-Fe-Cr second phase particles via grain boundary and dislocation pipe *** the same time,the excess value of Sn is increased by diffusing from the matrix to grain ***,Cu as a minor element in the concentration range of 0.05-0.3 wt.%is found to segregate at dislocations to form the Cottrell atmosphere and develop Cu-rich nanoclusters for suppressing dislocation *** new understanding of the segregation and clustering of minor alloying elements provides guidance for developing zirconium alloys with enhanced creep resistance.

关键词： Zirconium alloy Thermal creep Grain boundary segregation Dislocation segregation Cu-rich nanoclusters

A Preliminary Comparative Study on the Centering Algorithms for CassiniISS NAC Images

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第10期24卷 58-65页

作者： T.Liang q.-F.zhang G.-M.Liu W.-H.Zhu C.-S.Wang Department of Computer Science Jinan UniversityGuangzhou 510632China Sino-French Joint Laboratory for Astrometry Dynamics and Space ScienceJinan UniversityGuangzhou 510632China School of Computer Science Guangdong University of EducationGuangzhou 510303China

Obtaining high precision is an important consideration for astrometric studies using images from the Narrow Angle Camera(NAC)of the Cassini Imaging Science Subsystem(ISS).Selecting the best centering algorithm is key to enhancing astrometric *** this study,we compared the accuracy of five centering algorithms:Gaussian fitting,the modified moments method,and three point-spread function(PSF)fitting methods(effective PSF(ePSF),PSFEx,and extended PSF(x PSF)from the Cassini Imaging Central Laboratory for Operations(CICLOPS)).We assessed these algorithms using 70 ISS NAC star field images taken with CL1 and CL2 filters across different stellar *** ePSF method consistently demonstrated the highest accuracy,achieving precision below 0.03 pixels for stars of magnitude *** to the previously considered best,the modified moments method,the e PSF method improved overall accuracy by about 10%and 21%in the sample and line directions,***,the xPSF model provided by CICLOPS had lower precision than the ***,the ePSF exhibits an improvement in measurement precision of 23%and 17%in the sample and line directions,respectively,over the *** discrepancy might be attributed to the xPSF focusing on photometry rather than *** findings highlight the necessity of constructing PSF models specifically tailored for astrometric purposes in NAC images and provide guidance for enhancing astrometric measurements using these ISS NAC images.

关键词： methods:analytical techniques:image processing stars:imaging astrometry